. Product Description For connecting a 3-pin fan connector, e.g., to the motherboard, to a power supply connector (4-pin Molex), among other things, to obtain an additional power connection.
For connecting a fan with a 3-pin Molex connector (CPU cooler, case fan, etc.) to a power supply plug (4-pin). The adapter allows the fan to operate at 7 volts instead of 12 volts, which leads to a reduction in noise. Please note, the fan's speed and accordingly the airflow will be reduced. Important: Please note that it can come to damage by older power supplies without overload protection, if the adapter is loaded with more than 500mA.
Adaptor for connection of a fan with 3-Pin Molex plug (CPU fan, case fan etc.) to a fan socket on e.g. the Mainboard. This adaptor allows operation of the fan with a voltage of 7V instead of 12V which allows a reduction in noise. The great advantage of this adaptor is the fact that rpm monitoring is still possible. Please consider that the speed of the connected fan will be reduced, hence resulting in a lessened airflow. Technical specifications: Length: 20cm Feature: Reduces voltage to 7V Connection type: 3-Pin standard Extent of delivery: 1x Phobya adaptor 3Pin (12V) to 3Pin (7V) 20cm
Extension cable for a PWM device (4-Pin). As controlling and switching of a PWM fan via the Mainboard is much more affordable than using a fan controller, this cable is perfect for any system with PWM fans! The cable is shipped without sleeving, hence giving the user maximum freedom in design. Technical specifications: Length: 60cm Connector type: 4 Pin PWM Extent of delivery: 1x Phobya 4Pin PWM extension 60cm Please note the difference between a 4-Pin power connector (Molex) and a 4-Pin fan connector (PWM). This product has been tested for you: Aquainfos Tech-Review
NesteQ 3-Pin extension cables are the easiest and quickest way to expand the reach of a 3-Pin device. Simply plug this cable between device and power source for maximum flexibility. Also great to achieve a clean cable management! Technical specifications: Connector: 3-Pin male to 3-Pin female Cable length: 80cm each Colour: Black Extent of delivery: 3x 80cm 3-Pin extension cable
This cable is intended for transferring data e.g. from fans or a pump to the mainboard or a readout board such as the Heatmaster, T-Balancer or the Aquaero. Socket to socket is the solution here! All 3 wires supply the device not only with power, but also with the necessary pulse data! Technical details: Connection. 2x 3Pin socket Length: 32cm Scope of delivery: 1x connection cable 3Pin to 3Pin with speedometer signal
The Kolink ARGB 3-pin splitter cable allows you to extend an ARGB source from the motherboard to create an aesthetically pleasing lighting system. It features standard 3-pin addressable RGB headers (5VDG) from one socket to four sockets. Four male-to-male connectors are included. The splitter cable can be used with any standard 3-pin 5V RGB controller or with all common RGB headers from major motherboard manufacturers. The arrow marking on the 3-pin LED connector should be aligned with the +5V marking on the ARGB header.
Sleeved 4-Pin to 3x 4-Pin Y-splitter distribution cable. Distributes power supply and PWM signal to multiple fan connectors. Sleeving provides additional protection, stability and longer lifetime. Technical detailsLength15cmConnections4-Pin to 3x 4-PinMaterialPlastic, sleevedColorblack
Alphacool's 4-pin to 4x 4-pin Y-splitter cable is a high-quality solution to easily connect and control multiple PWM fans from the motherboard without the need for a separate fan control HUB. This cable is ideal for expanding the limited number of motherboard slots for these types of fans. With high-quality sleeving, the cable offers added protection, stability, and longer lifetime. The cable is offered in various lengths. Technical details Length: 15cm Connections: 1x 4-Pin to 4x 4-Pin PWM Material: Plastic, sleeved Color: black
Alphacool's 4-pin to 4x 4-pin Y-splitter cable is a high-quality solution to easily connect and control multiple PWM fans from the motherboard without the need for a separate fan control HUB. This cable is ideal for expanding the limited number of motherboard slots for these types of fans. With high-quality sleeving, the cable offers added protection, stability, and longer lifetime. The cable is offered in various lengths. Technical details Length 60cm Connections 1x 4-Pin to 3x 4-Pin PWM Material Plastic, sleeved Color white
The Phobya Adapter 4Pin Molex (12V) to 4x 4Pin PWM is an essential accessory for enhancing your cooling system's efficiency. This high-quality cable allows you to connect up to four PWM fans to a single 4Pin Molex power source, optimizing airflow and cooling performance. Ideal for custom PC builds, it ensures stable and reliable power distribution to your fans. Upgrade your cooling setup with this durable and versatile adapter from Phobya.
Sleeved 3-pin to 2x 3-pin Y-splitter distribution cable. Distributes power supply and RPM singal to multiple fan connectors. Sleeving provides additional protection, stability and longer lifetime. Technical detailsLength15cmConnections3-Pin auf 2x 3-PinMaterialPlastic, sleevedColorblack
Sleeved 3-pin to 2x 3-pin Y-splitter distribution cable. Distributes power supply and RPM singal to multiple fan connectors. Sleeving provides additional protection, stability and longer lifetime. Technical detailsLength30cmConnections3-Pin auf 2x 3-PinMaterialPlastic, sleevedColorblack
Sleeved 3-pin to 2x 3-pin Y-splitter distribution cable. Distributes power supply and RPM singal to multiple fan connectors. Sleeving provides additional protection, stability and longer lifetime. Technical detailsLength60cmConnections3-Pin auf 2x 3-PinMaterialPlastic, sleevedColorblack
Sleeved 3-pin to 3x 3-pin Y-splitter distribution cable. Distributes power supply and RPM signal to multiple fan connectors. Sleeving provides additional protection, stability, and longer lifetime. Technical detailsLength15cmConnections3-Pin to 3x 3-PinMaterialPlastic, sleevedColorblack
Sleeved 3-pin to 3x 3-pin Y-splitter distribution cable. Distributes power supply and RPM singal to multiple fan connectors. Sleeving provides additional protection, stability and longer lifetime. Technical detailsLength30cmConnections3-Pin auf 3x 3-PinMaterialPlastic, sleevedColorblack
Sleeved 3-Pin to 4x 3-Pin Y-splitter distribution cable. Distributes power supply and RPM singal to multiple fan connectors. Sleeving provides additional protection, stability and longer lifetime. Technical detailsLength30cmConnections3-Pin auf 4x 3-PinMaterialPlastic, sleevedColorblack
For connection of 2 fans with 3-Pin connectors to a 3-Pin connector e.g. on the Mainboard. Please note that the speed monitoring of only one connected fan is possible with this adaptor cable. A white sticker on one of the cables shows which connector can be monitored. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called sleeve, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Connectors: 3-Pin to 2x 3-Pin Y-cableColour: Black sleeve, black connectors and black heatshrinkDimensions: 30cm length eachConforms with RoHS Extent of delivery: 1x Phobya Y-cable 3-Pin Molex to 2x 3-Pin Molex 30cm - Black Please note: If connecting multiple fans to one fan socket by using this adapters please ensure that the source is specified to supply enough current to safely supply all fans together. Too high loads may result in damages to the system. This product has been reviewed for you:AquainfosTech-Review
Sleeved 3-Pin to 4x 3-Pin Y-splitter distribution cable. Distributes power supply and RPM singal to multiple fan connectors. Sleeving provides additional protection, stability and longer lifetime. Technical detailsLength15cmConnections3-Pin auf 4x 3-PinMaterialPlastic, sleevedColorblack
Sleeved 3-Pin to 4x 3-Pin Y-splitter distribution cable. Distributes power supply and RPM singal to multiple fan connectors. Sleeving provides additional protection, stability and longer lifetime. Technical detailsLength60cmConnections3-Pin auf 4x 3-PinMaterialPlastic, sleevedColorblack
Internal USB connection cable for connecting the aquaero to a free internal USB port on the mainboard. Total length approx. 100 cm. Required for big tower cases. Note: The aquaero already comes with a USB cable. This 100cm cable is only required if the cable included with the aquaero is too short. Note: A cable for connecting the Aquastream pump to the Aquaero is included in the delivery scope of the pump.
Extension cable for 3-Pin cables e.g. for fans. With rpm signal lead. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Connectors: 3-Pin extensionBlack sleeve, black connectors and black heatshrinkLength: 30cm Extent of delivery: 1x Phobya extension cable 3-Pin 30cm - black This product has been reviewed for you:AquainfosTech-Review
Extension cable for 3-Pin cables e.g. for fans. With rpm signal lead. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Connectors: 3-Pin extensionUV-reactive blue sleeve, black connectors and black heatshrinkLength: 30cm Extent of delivery: 1x Phobya extension cable 3-Pin 30cm - UV blue This product has been reviewed for you:AquainfosTech-ReviewHardwaremax
For connection of 4 fans with 3-Pin connectors to a 3-Pin connector e.g. on the Mainboard. Please note that the speed monitoring of only one connected fan is possible with this adaptor cable. A white sticker on one of the cables shows which connector can be monitored. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called sleeve, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Connectors: 3-Pin to 4x 3-Pin Y-cableColour: Black sleeve, black connectors and black heatshrinkDimensions: 30cm length eachConforms with RoHS Extent of delivery: 1x Phobya Y-cable 3-Pin Molex to 64 3-Pin Molex 30cm - Black Please note: If connecting multiple fans to one fan socket by using these adapters please ensure that the source is specified to supply enough current to safely supply all fans together. Too high loads may result in damages to the system. This product has been reviewed for you:AquainfosTech-Review
This HD audio extension cable allows you to extend or replace the motherboard audio cable. Phobya delivers the extension cable in a perfect black sleeve, in 30cm and 60cm versions. Technical Specifications: 1st side: HD Audio female connector 2nd side: HD Audio male connector Length: 30cm Sleeve: black Scope of Delivery 1x Phobya HD Audio extension cable female/male 30cm - black
This Alphacool Powerbutton/switch connection cable is intended for the Alphacool Powerbutton (coming soon). Optionally, this cable can also be used with other current switches on the market. Technical Specifications Length: 2m Black sleeved
This cable can be used to connect the signal header of a high flow NEXT to a fan output or to a flow sensor header that uses a fan connector. Total cable length approx. 70 cm. Scope of delivery: One cable Compatible with: All fan outputs (3-pin and 4-pin) of motherboards and fan controllers aquaero 6 XT/PRO/LT flow sensor header aquaero 5 XT/PRO/LT flow sensor header aquastream XT/ULTIMATE flow sensor header D5 NEXT flow sensor header poweradjust 3 flow sensor header
This cable can be used to connect the signal header of a high flow NEXT to a flow sensor header that uses a miniature connector. Total cable length approx. 70 cm. Scope of delivery: One cable Compatible with: farbwerk 360 flow sensor header OCTO flow sensor header QUADRO flow sensor header VISION flow sensor header
For connection of 6 fans with 3-Pin connectors to a 3-Pin connector e.g. on the Mainboard. Please note that the speed monitoring of only one connected fan is possible with this adaptor cable. A white sticker on one of the cables shows which connector can be monitored. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called sleeve, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Connectors: 3-Pin to 6x 3-Pin Y-cableColour: Black sleeve, black connectors and black heatshrinkDimensions: 30cm length eachConforms with RoHS Extent of delivery: 1x Phobya Y-cable 3-Pin Molex to 6x 3-Pin Molex 30cm - Black Please note: If connecting multiple fans to one fan connector by using these adapters please ensure that the source is specified to supply enough current to safely supply all fans together. Too high loads may result in damages to the system. This product has been reviewed for you:AquainfosTech-Review
For connection of 9 fans with 3-Pin connectors to a 3-Pin connector e.g. on the Mainboard. Please note that the speed monitoring of only one connected fan is possible with this adaptor cable. A white sticker on one of the cables shows which connector can be monitored. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called sleeve, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Connectors: 3-Pin to 9x 3-Pin Y-cableColour: Black sleeve, black connectors and black heatshrinkDimensions: 60cmConforms with RoHS Extent of delivery: 1x Phobya Y-cable 3-Pin Molex to 4x 3-Pin Molex 60cm - black Please note: If connecting multiple fans to one fan socket by using these adapters please ensure that the source is specified to supply enough current to safely supply all fans together. Too high loads may result in damages to the system. This product has been reviewed for you:AquainfosTech-Review
Adaptor for connection of a fan with 3-Pin Molex plug (CPU fan, case fan etc.) to a fan socket on e.g. the Mainboard. This adaptor allows operation of the fan with a voltage of 7V instead of 12V which allows a reduction in noise. The great advantage of this adaptor is the fact that rpm monitoring is still possible. Please consider that the speed of the connected fan will be reduced, hence resulting in a lessened airflow. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Length: 20cmColour: BlackFeature: Reduces voltage from regular 12V to 7VConnection type: 3-Pin standard Extent of delivery: 1x Phobya adaptor 3Pin (12V) to 3Pin (7V) 20cm - Black This product has been reviewed for you:Tech-Review
Alphacool is uncompromising in its choice of materials and is the only manufacturer in the world that uses only copper for all water-bearing parts in the radiator. The pre-chambers, cooling fins and cooling channels are made of pure copper. Only the fitting threads (made of brass) and the outer casing of the radiator (made of sheet steel) are made of other materials.HPE = High PerformanceThe HPE radiators are based on the NexXxoS series. But what is new? The HPE variant has additional cooling channels and a very high fin density. Due to the technical design, the cooling capacity increases significantly without restricting the water flow within the radiator. If the radiator is equipped with fans on both sides in push/pull operation, it is possible to achieve a significant temperature reduction compared to standard radiators.X-Flow instead of U-FlowThe water flow in classic PC radiators is U-shaped. This means that the water inlet and outlet are on the same side on the radiator. This has certain advantages in the normal PC, however, it is difficult to set up a reasonable cooling loop like this in an extremely flat server. Due to the X-Flow technology, the input and output are located on the opposite sides. This makes it very easy to create a loop in the server rack. For example, you could go out from one side, directly into a CPU, then into one or more graphics cards and the pump, then back to the radiator on the other side.Powerful cooling performanceTo maximise the performance of the radiator, Alphacool reaches deep into its bag of tricks and uses pure copper for the cooling fins, cooling channels and pre-chambers. Due to the high thermal conductivity of 400 W/mK (in comparison: aluminium 236 W/mK). The high fin density of the radiator with a fin spacing of 15 FPI enables an optimal flow of air. All cooling fins are additionally equipped with small flaps. These are tiny wings that direct the airflow in the desired direction and ensure controlled air turbulence. This increases the cooling capacity and minimises the possible noise created by airflow.Connection options & mountingThe NexXxoS HPE radiators each have three IN or OUT connections with G1/4" threads. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required.Safety firstThe NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.Patented screw plugsAll NexXxoS HPE X-Flow radiators use Alphacool's patented stop fittings. Anyone who has mounted a radiator on the front or in the roof of a case is familiar with the fact that protruding stop fittings can stop the radiator from sitting flush. With the patented stop fittings, Alphacool offers an excellent solution. The stop fittings are completely recessed in the radiator and sit flush with its surface. This means that nothing stands in the way of a clean installation. Of course, the radiators also look much more elegant with the flat stop fittings. Technical dataL x W x H326 x 60 x 40 mm (+/- 3% tolerance in the range of the prechamber)Quantity of cooling channels9Material cooling fins, channels & prechambercopperMaterial outer housingsteelFins per Inch15Cooling channels4Threads6x G1/4Thread size fan mountingM3Fan size40 mmFan slots7 one-sided / 14 double-sidedPressure tested0,8 BarMax working temperature60 °CWeight577 gColorBlackWarranty: 10 years???? Warranty Terms
An extension for a 4-Pin PWM connector. As fan control via the Mainboard with a PWM fan is much more affordable than a fan controller, this cable is perfect to give more flexibility. The extension cable is sleeved with a black mesh which additionally protects the cable and looks great! This further expands the lifespan of the cable. The ends towards the connectors are fixated with heatshrink for a clean finish. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Length: 30cmColour: Black4-Pin PWM Extent of delivery: 1x Phobya extension 4-Pin PWM 30cm - black This product has been reviewed for you:AquainfosTech-Review
