For connection of 6 fans with 3-Pin connectors to a 3-Pin connector e.g. on the Mainboard. Please note that the speed monitoring of only one connected fan is possible with this adaptor cable. A white sticker on one of the cables shows which connector can be monitored. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called sleeve, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Connectors: 3-Pin to 6x 3-Pin Y-cableColour: Black sleeve, black connectors and black heatshrinkDimensions: 30cm length eachConforms with RoHS Extent of delivery: 1x Phobya Y-cable 3-Pin Molex to 6x 3-Pin Molex 30cm - Black Please note: If connecting multiple fans to one fan connector by using these adapters please ensure that the source is specified to supply enough current to safely supply all fans together. Too high loads may result in damages to the system. This product has been reviewed for you:AquainfosTech-Review
For connection of 9 fans with 3-Pin connectors to a 3-Pin connector e.g. on the Mainboard. Please note that the speed monitoring of only one connected fan is possible with this adaptor cable. A white sticker on one of the cables shows which connector can be monitored. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called sleeve, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Connectors: 3-Pin to 9x 3-Pin Y-cableColour: Black sleeve, black connectors and black heatshrinkDimensions: 60cmConforms with RoHS Extent of delivery: 1x Phobya Y-cable 3-Pin Molex to 4x 3-Pin Molex 60cm - black Please note: If connecting multiple fans to one fan socket by using these adapters please ensure that the source is specified to supply enough current to safely supply all fans together. Too high loads may result in damages to the system. This product has been reviewed for you:AquainfosTech-Review
Adaptor for connection of a fan with 3-Pin Molex plug (CPU fan, case fan etc.) to a fan socket on e.g. the Mainboard. This adaptor allows operation of the fan with a voltage of 7V instead of 12V which allows a reduction in noise. The great advantage of this adaptor is the fact that rpm monitoring is still possible. Please consider that the speed of the connected fan will be reduced, hence resulting in a lessened airflow. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Length: 20cmColour: BlackFeature: Reduces voltage from regular 12V to 7VConnection type: 3-Pin standard Extent of delivery: 1x Phobya adaptor 3Pin (12V) to 3Pin (7V) 20cm - Black This product has been reviewed for you:Tech-Review
An extension for a 4-Pin PWM connector. As fan control via the Mainboard with a PWM fan is much more affordable than a fan controller, this cable is perfect to give more flexibility. The extension cable is sleeved with a black mesh which additionally protects the cable and looks great! This further expands the lifespan of the cable. The ends towards the connectors are fixated with heatshrink for a clean finish. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Length: 30cmColour: Black4-Pin PWM Extent of delivery: 1x Phobya extension 4-Pin PWM 30cm - black This product has been reviewed for you:AquainfosTech-Review
A Y-cable to connect 4x3-Pin fans to one 4-Pin power connector. For connection of up to four fans to one 4-Pin Molex power connector. The special feature of this adaptor is the looped-through 4-Pin Molex connector which still allows use of the connector used for connection of the fans. The extension cable is sleeved with a black mesh which additionally protects the cable and looks great! This further expands the lifespan of the cable. The ends towards the connectors are fixated with heatshrink for a clean finish. A white marking on one of the split cables shows from which cable the rpm signal is transmitted. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Connectors: 1x 4-Pin Molex male3x 3-Pin fan connector female Colour: Black sleeve, black connectors, black heatshrinkDimensions: Overall 30cmConforms with RoHS Extent of delivery: 1x Phobya Y-adaptor 4-Pin Molex to 4x3-Pin fan connector (12V) 30cm - black This product has been reviewed for you:AquainfosTech-Review
For connection of three 3-Pin fans (radiator fans, case fans etc.) to one Mainboard connector (3-Pin). Please note that rpm monitoring is possible for only of the connected fans. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables: Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. A white sticker on one of the cables shows which fan can be monitored. Technical specifications: Connectors: 3-Pin to 3x 3-Pin Y-cable Colour: Black sleeve, black connectors, black heatshrink Dimensions: 60cm each Conforms with RoHS Extent of delivery: 1x Phobya Y-cable 3Pin Molex to 3x 3Pin Molex 60cm - black Please note: When using this adaptor cable please always consider the limitations of the socket from which it draws power. To high currents and loads caused by the connected fans may damage the connected devices! This product has been reviewed for you: Aquainfos Tech-Review
A Y-cable for connection of a 1x 3-Pin and 2x 4-Pin PWM fan to a 4-Pin Molex connector. On this connector / adaptor cable the 4-Pin Molex connector is looped through, hence this adaptor does not even block a connector! Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables: Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Connectors: 4-Pin Molex to 1x 3-Pin and 2x 4-Pin (PWM) 12V Black sleeve, black connectors and black heatshrink Dimensions: 30cm overall Extent of delivery: 1x Phobya Y-adaptor 4-Pin Molex to 2x 4-Pin PWM and 3-Pin 30cm - black This product has been reviewed for you: Aquainfos Tech-Review
An extension for a 4-Pin PWM connector. As fan control via the Mainboard with a PWM fan is much more affordable than a fan controller, this cable is perfect to give more flexibility. The extension cable is sleeved with a black mesh which additionally protects the cable and looks great! This further expands the lifespan of the cable. The ends towards the connectors are fixated with heatshrink for a clean finish. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Length: 90cmColour: Black4-Pin PWM Extent of delivery: 1x Phobya extension 4-Pin PWM 90cm - black This product has been reviewed for you:AquainfosTech-Review
An adapter from one PWM connector (4Pin) to 2x PWM (4Pin). Since controlling and switching PWM fans via the mainboard is much more cost-effective than using a fan controller, this cable is ideal. This cable can be used to increase the small number of mainboard slots for this type of fan. The adapter is supplied in a simple black. The cables are shielded with a matching sheath made of flex sleeves. It offers additional protection against abrasion. This increases the service life of the cables considerably. The ends near the connectors have been provided with shrink tubing to create a clean transition. Sleeve: This cable is not only practical, but also very visually appealing. The mesh that wraps around the actual cable is very dense and offers exactly the effect that professional sleevers want: complete conversion of the cable to emphasize the uniqueness of their system even better! Particular attention was paid to the combination of the cable sheath (the sleeve), the connector and the shrink tubing so that they create a uniform image. Sets: Phobya's goal is to accommodate hobby and professional case modders a little. Sleeving is a lot of work and takes a lot of time, so with Phobya's cables you can now rebuild your entire system the way you want, just by changing the cable. Technical details: Connections: 1x PWM female connector 2x PWM male connector Colour: black sleeve, black connectors, black shrink tube Dimensions: complete 10cm RoHS compliant Scope of delivery: 1x Phobya Y-cable 4Pin to 2x 4Pin PWM 10cm - Black
A Y-cable to connect 3x4-Pin PWM fans to one 4-Pin PWM connector. As fan control via the Mainboard with a PWM fan is much more affordable than a fan controller, this cable is perfect to give more flexibility. The extension cable is sleeved with a black mesh which additionally protects the cable and looks great! This further expands the lifespan of the cable. The ends towards the connectors are fixated with heatshrink for a clean finish. A white marking on one of the split cables shows from which cable the rpm signal is transmitted. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Connectors: 1x 4-Pin PWM male3x 4-Pin PWM female Colour: Black sleeve, black connectors, black heatshrinkDimensions: Overall 30cmConforms with RoHS Extent of delivery: 1x Phobya Y-cable 4-Pin PWM to 3x4-Pin PWM 30cm - black This product has been reviewed for you:AquainfosTech-Review
This cable can be used to expand the PSU connector P4 respectively EPS12V. It can be sued if the PSU cable does not reach far enough. This may occur in large cases or cases with inverted Mainboard. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called sleeve, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Colour:Black sleeve, black connectors, black heatshrinkConnector: 8-Pin to 8-Pin extensionLength: 30cmConforms with RoHS Extent of delivery: 1x Phobya extension 8-Pin or EPS12V 30cm - Black This product has been reviewed for you:AquainfosTech-Review
This cable can be used to expand the PSU connector P4 respectively EPS12V. It can be sued if the PSU cable does not reach far enough. This may occur in large cases or cases with inverted Mainboard. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called sleeve, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Colour: Black sleeve, black connectors, black heatshrinkConnector: 8-Pin to 8-Pin extensionLength: 45cmConforms with RoHS Extent of delivery: 1x Phobya extension 8-Pin or EPS12V 45cm - Black
Extension cable for connection of a 4-Pin Molex fan (CPU fan, case fan etc.) to a PSU connector or other fan connector (4-Pin Molex), approx. 32cm long. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications:Connector: 4-pin plug to 4-Pin socketLength: 30 cmColour: black sleeve, black heatshrink, black connectors Extent of delivery:1x Phobya 4Pin Molex power extension 30cm - black This product has been reviewed for you:AquainfosTech-ReviewExtremehardware (it.)
Extension cable for connection of a 4-Pin Molex fan (CPU fan, case fan etc.) to a PSU connector or other fan connector (4-Pin Molex), approx. 62cm long. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications:Connector: 4-pin plug to 4-Pin socketLength: 60 cmColour: black sleeve, black heatshrink, black connectorsExtent of delivery:1x Phobya 4Pin Molex power extension 60cm - black This product has been reviewed for you:AquainfosTech-ReviewExtremehardware (it.)
With this adapter, fans or pumps can be operated optionally with 12V, 7V, or 5V. Simply connect the 4-pin Molex connector to the power supply and select a voltage. Reducing the voltage results in a decrease in the rotational speed and thus also the noise level.Example Alphacool DC/LT Pump:12V = 3600RPM7V = 2600RPM5V = 1500RPM Sleeving:This cable is not only practical but also visually very appealing. The surrounding mesh that wraps the actual cables is very dense and provides exactly the effect that professional sleevers want: a complete redesign of the cables to better emphasize the uniqueness of their system! Special attention was paid to the combination of the cable sheath (the sleeve), the connector, and the heat shrink tubing to ensure they create a uniform appearance. Sets:Phobya's goal is to cater to hobby and professional case modders to some extent. Sleeving is a lot of work and takes a lot of time, so with the cables from Phobya, you can now modify your entire system the way you want, simply by swapping the cables. Technical Details:Connection: 4-pin connector to 3x 3 Pin Molex (12V/7V/5V)Cable length: 10 cmColor: black sleeve, black connector, black heat shrink tubingDelivery includes:1x Phobya Adapter 4Pin Molex to 3Pin 5V/7V/12V 10cm - Black
A Y-cable to connect 6x4-Pin PWM fans to one 4-Pin PWM connector.As fan control via the Mainboard with a PWM fan is much more affordable than a fan controller, this cable is perfect to give more flexibility.The extension cable is sleeved with a black mesh which additionally protects the cable and looks great! This further expands the lifespan of the cable. The ends towards the connectors are fixated with heatshrink for a clean finish.A white marking on one of the split cables shows from which cable the rpm signal is transmitted.Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look.The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables.Technical specifications: Connectors: 1x 4-Pin PWM male6x 4-Pin PWM femaleColour: Black sleeve, black connectors, black heatshrinkDimensions: Overall 60cmConforms with RoHSExtent of delivery: 1x Phobya Y-cable 4-Pin PWM to 6x4-Pin PWM 60cm - black
A Y-cable to connect 9x4-Pin PWM fans to one 4-Pin PWM connector.As fan control via the Mainboard with a PWM fan is much more affordable than a fan controller, this cable is perfect to give more flexibility.The extension cable is sleeved with a black mesh which additionally protects the cable and looks great! This further expands the lifespan of the cable. The ends towards the connectors are fixated with heatshrink for a clean finish.A white marking on one of the split cables shows from which cable the rpm signal is transmitted.Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look.The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables.Technical specifications: Connectors: 1x 4-Pin PWM male9x 4-Pin PWM femaleColour: Black sleeve, black connectors, black heatshrinkDimensions: Overall 60cmConforms with RoHSExtent of delivery: 1x Phobya Y-cable 4-Pin PWM to 9x4-Pin PWM 60cm - black
This cable can be used to connect the alarm header of an aquastream ULTIMATE, poweradjust 3 or mps family device with the power switch header of a computer motherboard. This allows for an emergency shutdown of the PC in case of an alarm condition. The cable is to be connected in between motherboard and PC case power switch, the power switch remains operational. Total cable length approx. 70 cm. Scope of delivery One cable Compatible with aqualis XT aquainlet XT D5 pump with USB and aquabus interface Pump adapter/pump module for aqualis with fill level senso aquastream ULTIMATE Flow sensor high flow USB Flow sensor mps flow Pressure sensor mps pressure poweradjust 3 USB Before connecting the cable, make sure the RPM/alarm header of the device is configured correctly! Configuration for mps devices (aquasuite Software)Tab "Alarm configuration": "Power switch (53217)" has to be activated. Configuration for aquastream ULTIMATE (aquasuite Software)Tab "Alarms": "Power switch (53217)" has to be activated. Configuration for poweradjust 3 (aquasuite Software)Tab "Alarm configuration": "Power switch (53217)" has to be activated. After connecting the cable, test the setup by deliberately creating an alarm condition. If the PC is not shut down, the cable header connected to the motherboard must be rotated by 180 degrees and the test has to be repeated. Emergency shutdown may result in data loss as operating system and running programs are not shut down properly!
Extension cable for 3-Pin cables e.g. for fans. With rpm signal lead. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. Sets: Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Connectors: 3-Pin extensionBlack sleeve, black connectors and black heatshrinkLength: 60cmConforms with RoHS Extent of delivery: 1x Phobya extension cable 3-Pin Molex 60cm - black This product has been reviewed for you:AquainfosTech-Review
A cable to connect the PSU to a graphics card. This cable is designed to connect a graphics card with a 6-Pin power connector to a PSU with only 4-Pin Molex connector or too few 6Pin connectors for Multi-GPU systems. The cable has two 4-Pin Molex connector on one end and a 6-Pin graphics card power connector on the other end. Technical details: Color: Black connectors, yellow/black cable Connectors: 4Pin Molex and 6-Pin PCI Express Length: 2x 15cm Extent of delivery: 1x PCI-E power adaptor 2x 4-Pin Molex to 1x 6-Pin PCI-E>
A cable for extension or adaption or a 6-Pin plug. This cable is shipped completely sleeved. This doesn't just look great, it also protects the cable which can increase the lifespan of the cable significantly. And it looks just great! Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called sleeve, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Connectors and Colours: 6-Pin black plug, 6+2-Pin black, black cablesConnector: 6+2-Pin PCIeLength: 30cm Extent of delivery: 1x Phobya PCIe power adaptor 6-Pin --> 8-Pin PCIe (or 6+2-Pin) 30cm - black This product has been reviewed for you:AquainfosTech-Review
This ribbon cable if perfect for DIY projects. 10 leads connected parallely end the cable mess inside of the case. The cable is very flexible and only 0.9mm thick which makes it easy to hide for a clean cable management. The cable can be used for a widespread field of applications. Especially when using a large case with many LEDs, fans or similar accessories the inside of the case is often plastered with a multitude of cables. This cable now allows the creation of extensions and adaptors of any desired length for a cleaner cable management. Color order: Brown, red, orange, yellow, green, blue, violet, grey, white black Technical specifications: Material:Copper, Plastic Length: 3m Thickness: 0,9mm Width: 13mm RoHS: Conforms 10-lead Extent of delivery: 1x Ribbon cable AWG28 10-lead. 3m
Connection cable for installation between computer and printer or joystick. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables: Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Length: 300cm Colour: Black sleeve, black connectors, black heatshrink Connector type: Plug to plug Extent of delivery: 1x Phobya serial cable DB9 1:1 (plug to plug 9-Pin) connection cable 3m - black sleeved This product has been reviewed for you: Aquainfos Tech-Review Extremehardware (it.)
This cable permits operation of two PSUs in one system with one power button. Integration of this cable is extremely easy: Connect the first PSU to the Mainboard as usual, and connect the second one with the additional ATX plug. Of course both power supplies need to be connected to a 230V mains supply. Now both power supplies will start simultaneously when the power button is pushed, and both will also shut down when the system is shut down. The advantages of Dual PSU use are great! -New PSUs don't have to be so expensive any more - older PSUs can be re-activated - More connection possibilities - Bridging of distances is easier - and much more! Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables: Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Length: 10cm and 20cm Color: Black sleeve Connectors: 2x 24-Pin to 1x 24-Pin Extent of delivery: 1x Phobya 24-Pin dual PSU start cable (2x 24-Pin to 1x 24-Pin), individually sleeved - black
A Y-cable for distribution of the VGA power connector on the PSU to multiple graphics cards.The majority of PSUs is not equipped with sufficient connectors for operation of a SLI or Crossfire system. With only one power connector, it is hard to sufficiently supply power to the second graphics card. The solution is this new Y-cable from Phobya. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called sleeve, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables: Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Length: 30cm Colour: Black Extent of delivery: 1x Phobya Y-Kabel 8Pin Buchse auf 2x 6+2Pin Stecker (VGA) - Schwarz
With this cable it is possible to expand the front panel. The cable leads are sleeved with fine mesh sleeving, fitting into the system perfectly. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called sleeve, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables: Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Cable length: 30cm Colour: Black Extent of delivery: 1x Phobya front panel extension 30cm - black
This cable is used to connect the 2/2 way magnet valve from Alphacool. The 4-pin molex connector supplies the valve with 12V power. Two of the cable sockets are attached to the valve, the other two to an on/off switch. This allows the valve to be opened and closed manually. For a more detailed explanation, please watch the linked video. Technical Specifications: Cable - sleeved Length: 50cm Scope of Delivery: 1x 4-pin molex single adapter for Alphacool magnetic valve 50cm - black Notice:The first time connecting the cable socket to the magnetic valve will require somewhat more effort.
EK Water Blocks EK-Quantum Vector³ TUF RTX 5080 - Plexi: Ultimate Liquid Cooling for Your ASUS TUF RTX 5080 Experience the pinnacle of high-performance liquid cooling with the EK-Quantum Vector³ TUF RTX 5080 – Plexi, specifically designed for the ASUS TUF Gaming GeForce RTX™ 5080 16GB GDDR7 and ASUS TUF Gaming GeForce RTX™ 5080 16GB GDDR7 OC Edition. This premium water block sets new standards in cooling performance, reliability, and aesthetics. Featuring an improved, larger cooling engine, higher-performance thermal pads, and an innovative gasket design, the Vector³ TUF RTX 5080 guarantees outstanding temperatures, even under extreme loads. Unmatched Cooling Performance Through Optimized Cooling Engine The revised cooling structure of the Vector³ TUF RTX 5080 maximizes heat transfer with an expanded fin array and optimized coolant flow paths. It actively cools the GPU core, VRAM, and power stages, while the included backplate provides passive cooling for PCB hotspots. Optimized Open Split-Flow Cooling Engine: Superior flow distribution for uniform cooling and reduced restriction. Low Hydraulic Restriction: Compatible with both high- and low-flow pump systems. Ideal for Overclocking & High-Load Applications: Keep your GPU running at peak performance with sustained low temperatures. Premium Materials and Precision Engineering The Vector³ TUF RTX 5080 is built with high-quality components that ensure durability and peak performance: Nickel-Plated Electrolytic Copper Coldplate: Maximizes thermal conductivity and longevity. CNC-Machined Cast Acrylic Top: Showcases the coolant and offers a crystal-clear aesthetic. Black Anodized Aluminum Backplate: Increases cooling surface area and enhances structural integrity. Single O-Ring Seal Design: Reduces potential failure points for long-term reliability. New Gasket System: Prevents solid coolant particles from collecting between the coldplate and acrylic top, ensuring optimal performance. Pre-Cut High-Performance Thermal Pads: Next-gen thermal pads are partially pre-cut for seamless installation and optimized contact. Included Full-Coverage Backplate Every Vector³ TUF RTX 5080 water block includes a backplate designed to: Passively cool PCB hotspots, including VRAM, core, and VRM sections. Provide a sleek, modern look with its black anodized aluminum finish. Simplify installation with pre-installed captive backplate screws. EK-Matrix7 Support – For Perfect Loop Planning The EK-Quantum Vector³ TUF RTX 5080 follows EK-Matrix7, a standard that simplifies liquid cooling loop assembly by aligning ports and spacing components for intuitive tube routing. Perfect integration with EK-Quantum Reflection² distribution plates. Straightforward Tube Bending & Loop Planning – Less time spent measuring and adjusting. Seamless Vertical & Horizontal GPU Mounting – A clean, professional look with minimal effort. Addressable D-RGB Compatibility Addressable D-RGB LED lighting is deployed on the longest edge of both top and backside water blocks for improved uniformity and brightness. The PCB and diodes are concealed inside a clean aluminum extrusion. The individually addressable RGB LED is compatible with popular RGB sync technologies from all major motherboard manufacturers. Technical Specifications: Dimensions (L x H x W): 247 x 156 x 27 mm D-RGB LED Count: 13 D-RGB Connector: 3-pin 5V digital LED header D-RGB Cable Length: 500 mm Made in Slovenia – Europe! Optimize your ASUS TUF RTX 5080 with the ultimate liquid cooling of the EK-Quantum Vector³ TUF RTX 5080 – Plexi and experience unmatched performance and aesthetics!
Made from acrylic, the TG Scraper features a narrow tip specifically developed to remove, for example, silicone adhesive from the package (PCB) of a delidded processor or residual indium solder from the CPU dies. The ergonomic design ensures a firm and secure grip during use. Note: Careful and precise handling of the TG Scraper is essential to avoid damaging small electronic components on the CPU package or the dies. When removing indium solder from the die(s), it is recommended to first gently scrape the surface with the TG Scraper, then clean remaining solder residue from the die surfaces using liquid metal. Scope of Delivery: 3× TG Scraper
Recommended for the following Thermal Grizzly pastes: Aeronaut, Hydronaut, Kryonaut, and Kryonaut Extreme. The Thermal Grizzly Spatula, in its basic version for thermal paste, is an essential tool to ensure precise and even application. These plastic spatulas are soft and have lower hardness compared to metal tools, reducing the risk of scratching or damaging the surface of the CPU or other components where the thermal paste is applied. Plastic spatulas also offer the added benefit of being non-reactive with the metallic components of thermal compounds. Notes: Care should be taken to ensure that the spatula used is clean and free from residues or impurities. Residues on the applicator may affect the results of the application. The spatulas should only be used with thermal paste. The TG Spatula is recommended for Aeronaut, Hydronaut, Kryonaut, and Kryonaut Extreme, and is supplied in a convenient pack of three.
Using the mount could not be easier. Just slide the mount onto the struts to the desired position and fix them in place using the lateral countersunk screws. The back of the mount has a M4 thread to screw the mount to the case wall. Vibration dampening montage is also possible. Decoupling modules are contained in the scope of delivery. With optional adapters the reservoir can be fixed into the mounting holes of 120x120mm or 140x140mm fans. This can attach the reservoir to a HTSF2 series radiator for example. We also offer an adapter to mount the reservoir to a radiator from the MO-RA3 series. Specifications: Material: POM (ACETAL) Color: black Included: 1x HEATKILLER® Tube - Basic Mounting Kit Mounting material
The nickel-plated sealing plug in the colour shiny silver from Bitspower can be screwed into a G1/4" internal thread for a certain time or permanently, e.g. to seal radiators or equalising tanks. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Silver Thread: G1/4"
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a straight G1 / 4 "fitting for 1/2" ID or 13mm OD hoses in Real Hi-Flow design. Since no union nut is used, any tube thickness and thus outer diameter can be used. To fix the hoses on the connection, we recommend a cable tie or a hose clamp as a precaution. Note: We recommend a 15mm spanner for installation and disassembly of the connection. Please note that even when using tools the connection may only be tightened hand-tight. You can find our tool here . Technical details:Material: nickel-plated brassThread: G1 / 4 inchesSuitable for: 13 mm hose (inside diameter)
High quality tube made from polyurethane (PUR), fits all systems. 10mm outer diameter and 8mm inner diameter. Colour: transparent Order quantity = tube length in metres!
