Tootekood: BP-NCCLT12ACBK-L1000GTIN: 4719552224616Jahutid ja lisad
With the Crystal Link Tubes, Waku specialist Bitspower presents a very interesting solution for water enthusiasts who are not completely unskilled in their craft. These are solid tubes of acrylic plastic, which can be cut by the user to the required length and bent with the aid of a heat source suitable. The resulting possible connection of the individual water cooling parts with longer dead straight sections and exactly curved radii is a visually appealing alternative to the traditional connection by means of hoses dar. For example, if you use a hot air gun and the acrylic tube heated with it for some time, the material is so soft that one It can easily bend into the desired radius and holds as long until the acrylic has cooled and the now bent tube hardens again. It does not get any more individual Everything you need can be created here and even adjusted later. Ideally, in addition to a hot air gun and gloves you have a silicone rod (or something similar flexible, but heat-resistant) to hand, which one pushes into the tube in advance, so that the soft tube gets no kink when bending. The transparent-blue Crystal Link Tube offered here has an outer diameter of 12 mm and an inner diameter of 10 mm. The length is 100 cm. It can be used in conjunction with bit-power adapter fittings from the C47, C48 and ML series. Technical details:Material: acrylic glass (PMMA)Colour blueOuter diameter: 12 mmInner diameter: 10 mmLength: 1,000 mmCompatibility: C47 Series Bit Power Fittings and Adapters C48 Bit Power Fittings and Adapters C48 Series Bit Power Fittings and Adapters
Toote kirjeldus inglise keeles:With the Crystal Link Tubes, Waku specialist Bitspower presents a very interesting solution for water enthusiasts who are not completely unskilled in their craft. These are solid tubes of acrylic plastic, which can be cut by the user to the required length and bent with the aid of a heat source suitable. The resulting possible connection of the individual water cooling parts with longer dead straight sections and exactly curved radii is a visually appealing alternative to the traditional connection by means of hoses dar. For example, if you use a hot air gun and the acrylic tube heated with it for some time, the material is so soft that one It can easily bend into the desired radius and holds as long until the acrylic has cooled and the now bent tube hardens again. It does not get any more individual Everything you need can be created here and even adjusted later. Ideally, in addition to a hot air gun and gloves you have a silicone rod (or something similar flexible, but heat-resistant) to hand, which one pushes into the tube in advance, so that the soft tube gets no kink when bending. The transparent-blue Crystal Link Tube offered here has an outer diameter of 12 mm and an inner diameter of 10 mm. The length is 100 cm. It can be used in conjunction with bit-power adapter fittings from the C47, C48 and ML series. Technical details:Material: acrylic glass (PMMA)Colour transparentOuter diameter: 12 mmInner diameter: 10 mmLength: 500 mmCompatibility: C47 Series Bit Power Fittings and Adapters C48 Bit Power Fittings and Adapters C48 Series Bit Power Fittings and Adapters
RGBpx LED ring for aqualis 100/150, 10 addressable LEDsThe RGBpx-compatible LED ring for aqualis 100 and aqualis 150 expansion tanks with a total of 10 individually addressable LEDs. The LEDs are mounted in a black rubber ring which is slid onto the glass tubes of the aqualis 100 and aqualis 150 expansion tank series.To operate the LED strip, an appropriate control unit with RGBpx output is required (not included in delivery). At the end of the strip there is an additional connector to connect another RGBpx component.Technical data: Inner diameter 50 mm Dimensions approx. 60 x 62 x 10 mm 10 individually controllable LEDs Scope of delivery: RGBpx LED ring one RGBpx connection cable, length 50 cm Compatible to: D5 NEXT QUADRO fan controller
The adapter for 16mm (AD) Hard Tubes in matt black from Bitspower is especially designed for the connection of two graphics cards with SLI/ Crossfire to bridge the short distance. If two graphics cards are used, two of the adapters are also required. They are sealed with two rubber rings. The adapter is especially well compatible with Bitspower's Crystal Link Tube series. Technical Data: Material: Nickel-Plated Brass Colour: Matt Black Connection: 16 mm (OD) Thread: G1/4" Thread Length: 5 mm
Now finally also with us the Black ICE Nemesis radiators. The Black Ice® Nemesis® GTS radiators are the next generation of computer radiators from Hardware Labs. These radiators offer an improved cooling performance when using
Now finally also with us the Black ICE Nemesis radiators. The Black Ice® Nemesis® GTS radiators are the next generation of computer radiators from Hardware Labs. These radiators offer an improved cooling performance when using
Hochwertiges Reservoir aus Acryl, 200 ml Füllvolumen & flexible Montage, Vorbereitung für DDC-Pumpe & 4 Anschlüsse für 1/4-Zoll-Fittings, Bracket zur Installation auf 120- und 140-mm-Lüftern, digital adressierbare RGB-Beleuchtung
The construction of a quiet computer is always a challenge, especially if performance and proper cooling are also a factor. The SF01 consists of two foam plastic sheets which help with noise absorption with minimal pressure inside of the system. Each sheet has a large surface and is made from very dense foam plastic with a thickness of 4mm. This ensures good noise reduction and flexible integration. Special features: Special high-grade EPOM foam plastic material for noise absorption Excellent adhesive properties even at high temperatures Simply cut to size: Fits in any computer case Contains two foam sheets Technical specifications: Colour: Black Material: EPOM Dimensions (WxLxD): 530x380x4mm Extent of delivery: 1x Silverstone noise absorption sheet (SST-SF01)
Technical Data: Material: Nickel-Plated Brass Colour: Black Supported Tube: 16/12 mm Thread: G1/4", male Thread Length: 4,5 mm Outer Diameter (Fitting): 23 mm Installed Height: 19 mm Compatible Soft Tubing: PVC, EPDM, Norprene, Silicone and most other flexible tubes
Technical Data: Material: Nickel-Plated Brass Colour: Silver Nickel Supported Tube: 16/12 mm Thread: G1/4", male Thread Length: 4,5 mm Outer Diameter (Fitting): 23 mm Installed Height: 19 mm Compatible Soft Tubing: PVC, EPDM, Norprene, Silicone and most other flexible tubes
Toote kirjeldus inglise keeles:The Wing Boost 3 RGB combines many of the benefits of its famous predecessors with a circular, digitally addressable RGB LED lighting in the outer frame. The eponymous "Wing Boosts", small increases on the impeller intake side, reduce air turbulence. The fan therefore works quieter at higher speeds than conventional fan designs would allow.The features of the Alpenföhn Wing Boost 3 ARGB fan at a glance:- 120 millimeter fan with digitally addressable RGB illumination- Hydrodynamic bearing for high performance, quiet operation and long life- Optimized rotor blades deliver the perfect balance between contact pressure and airflow- Speed range from 700 to 1,600 rpm- 4-pin PWM connector- Compatible with ASUS Aura, MSI Mystic Light, Gigabyte RGB Fusion and ASRock PolychromeWing Boost 3 ARGB: Powerful 120mm fanThe Wing Boost 3 ARGB is a 120mm PWM-controlled fan that is equally well-suited for mounting on enclosures, processor coolers, and radiators. The fan operates in a speed range between 700 and 1,600 rpm, achieving a delivery volume of 92.6 m³ / h and a static pressure of 2.19 mm H2O.The hydraulic bearing, which reduces friction noise to a minimum, and the rubber decouplers in the fan frame ensure whisper-quiet operation, even at low revs. Under full load, the Wing Boost 3 RGB produces a maximum noise level of 23.5 decibels.Addressable RGB LED lighting in the frameThe Alpenföhn Wing Boost 3 ARGB is equipped with digitally addressable RGB LED lighting. The manufacturer has integrated two 16.8 million colored rings into the fan frame, which casts a light glow on the impeller and can be connected to the motherboard or corresponding controllers via a 3-pin RGB connector. The Wing Boost 3 ARGB is compatible with ASUS Aura, Gigabyte RGB Fusion, ASRock Polychrome RGB and MSI Mystic Light.Technical details:- Dimensions: 120 x 120 x 25 mm (W x H x D)- Material: plastic, rubber- Color: white (frame, rotor), gray (decoupler)- Volume: max. 23.5 dB (A)- Speed: 700 - 1,600 rpm- Delivery volume: max. 92.6 m³ / h- Static pressure: 2.19 mm H2O- Voltage: 12VConnection:- 4-pin PWM- 3-pin RGB (5VDG)- Lighting: RGB (16.8 million colors)Delivery:- 1x Alpenföhn Wing Boost 3 RGB- 4x screws for housing- 4x screws for radiator
Toote kirjeldus inglise keeles:The Alphacool Cape Coolplex reservoirs have been well-known and popular on the water cooling market for years!But even such great products can sometimes use an update to fulfill even the most recent demands. Hence we at Alphacool have let the old series run out and now introduce the new series with POM end pieces as “LT” and now even with solid metal end pieces as the “Copper Edition”. Of course the tubes are made from high-grade Plexiglas which has proven itself with safe operation in many cooling systems for many years!The changes made are subtle but very well thought through:Besides the new materials and surface finishes the top piece of the reservoirs is now equipped with an additional thread, making them great for installation of a Fillport. Additionally the reservoir can now also be installed horizontally! The riser tube is now removable for applications where the top of the reservoir is used as an inlet.A nice side effect: Now even more lighting modules can be installed for beautiful lighting effects.To round off the new concept the screw plugs on all versions now have an elegant polished copper surface finish!For maximum compatibility all threads are G1/4” in size. The proven transparent mounts are now also included again for almost invisible mounting. Make your PC a piece of art with the new Cape Coolplex reservoirs!Technical specifications:- Material: POM, Plexi- Height: 100mm- Diameter: 50mmReviews:- Connection threads: G1/4"- Weight: 264gExtent of delivery:- Reservoir- 2x Mounting clamps- 2 x G1/4" Screw plugsPlease note: For mounting additional screws are needed. We recommend ordering item No. 15705 with this reservoir.Weight & dimensionsWidth 50 mmDepth 50 mmHeight 100 mmDesignMaterial Polyoxymethylene (POM)Colour of product Black, Transparent
DEMCiflex Dust Filter 120mm White DF0688Toote kirjeldus inglise keeles:If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior. In addition, dust in the housing is the main reason for overheating and thus for possible, unstable operation. Although a cleaning time-to-time can not be prevented, however, the effort can be significantly reduced. A simple and cost-effective solution are dust filters, which are placed in front of the sucking fans. Once installed, it is no longer necessary to dedust the entire interior with all its inaccessible corners and sensitive components, only the filters. DEMCiflex offers a particularly easy-to-retrofit solution, which in this case is suitable for 120 mm fans. Here, the filter is simply placed from the outside of the housing on the fan opening and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction. Since not all fan positions are magnetically attractive, an additional frame to the scope of delivery is glued to the back and on which the filter is held. The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly. Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. This is very simple in many ways. Firstly, it is easy to see if cleaning is necessary again - as soon as the white filter fabric has a gray haze, you should do this task. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt. Note: The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate. Technical details:Size (frame): 128 x 128 mmSize (filter): 105 x 105 mmCompatibility: 120 mm fan slotMaterial (filter): polyester meshColor: white (frame), white (filter)Mounting: magnetic bracket + mounting frameAdvantages: Fast installation No compatibility restriction Easy and quick cleaning Effective filter effect with high air permeability Durable fabric
EK-Quantum Magnitude Accent - Purple is an interchangeable inner aesthetic frame for EK's new Magnitude water block. This purple accent is best used on Magnitude water blocks with translucent tops where the LED’s shine inwards, or for those without LED implementation. This Magnitude accent is made of anodized aluminum. Available in several different colors and materials, these accent frames are compatible only with EK-Quantum Magnitude CPU water blocks Made in Europe - Slovenia!
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: L-ConnectorThis 90° angle adapter has a ¼” internal screw thread on both sides. Its compact shape makes it perfect for hard-to-reach spaces. Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Length: 25mm Width: 25mm Height: 18mm Scope of Delivery: 1x Alphacool Eiszapfen L-connector G1/4 inner thread to G1/4 inner thread - deep black
EK-Quantum Magnitude Accent - Green is an interchangeable aesthetic inner frame for EK's new Magnitude water block. This green accent is best used on Magnitude water blocks with translucent tops where the LED’s shine inwards, or for those without LED implementation. This Magnitude accent is made of anodized aluminum. Available in several different colors and materials, these accent frames are compatible only with EK-Quantum Magnitude CPU water blocks Made in Europe - Slovenia!
The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.This Radiator can discharge up to 1400 W at an ambient temperature of 30°C and fans with 4000 rpm.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop.Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport.Versatility is the essence of the new NexXxos series! The radiators are available in different versions to be used with 120mm, 140mm or 180mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical DataDimensions (L x W x H)277 x 124 x 46mmQuantity of cooling channels24Cooling channelsCopperColorblackFan threadM3Connection6x G1/4"SlatsCopperNumber of fans2Thickness39 - 49mmFan size120mmHousingSteelManufacturerAlphacoolFins per inch12Pressure tested0,8 bar
Drei 120-mm-PWM-Lüfter in Schwarz, sehr leiser Betrieb mit 23,8 dB(A), adressierbare RGB-Beleuchtung, Drehzahl von 1.500 U/min, max. 59,8 m³/h Fördervolumen, max. 1,04 mmH2O statischer Druck
The ICEBERG THERMAL DRIFTIce Thermal Pad is designed to efficiently transfer heat away from your electronic components. Measuring 40mm by 80mm with a thickness of 2.0mm, this thermal pad offers excellent thermal conductivity. Lightweight at 0.029 kg, it is easy to install and perfect for enhancing cooling performance in tight spaces. Ideal for use in computers, gaming consoles, and other electronic devices, this product ensures your components stay cool and perform optimally.
The ICEBERG THERMAL DRIFTIce Thermal Pad by Iceberg Thermal is designed to efficiently dissipate heat and enhance the performance of your electronic devices. Measuring 40mm by 80mm with a thickness of 1.0mm, this thermal pad is perfect for a variety of applications. It is lightweight, with a gross weight of only 0.020 kg, making it easy to handle and install. Ensure your devices remain cool and functional with this high-quality thermal pad.
The ICEBERG THERMAL DRIFTIce Thermal Pad by Iceberg Thermal is designed to enhance cooling efficiency in electronic devices. Measuring 40mm x 120mm with a thickness of 2.0mm, this thermal pad ensures optimal heat transfer. With a lightweight design, it is easy to install and fits a variety of applications. Perfect for maintaining performance and longevity of your components.
The ICEBERG THERMAL DRIFTIce Thermal Pad by Iceberg Thermal is an effective solution for heat management in electronic devices. Measuring 40mm by 120mm with a thickness of 1.5mm, this thermal pad provides optimal thermal conductivity to improve device performance. It is lightweight, with a gross weight of only 0.035 kg, making it easy to handle and install. Ideal for a variety of applications, this thermal pad ensures efficient heat dissipation, protecting components from overheating.
The nickel-plated adapter from Bitspower in the color shiny black, has a 90 degree angle and is rotatable. One side is intended for mounting hard tubes with an outside diameter of 12mm and the other side has a G1/4" external thread for mounting on radiators and Co. The two rubber rings seal the sides. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Black Angle: 90° Thread: G1/4 inch Connection: 1x Ø 12 mm
The nickel-plated adapter from Bitspower in matt black has a 90 degree angle and is rotatable. One side is designed for mounting hard tubes with an outside diameter of 12mm and the other side has a G1/4" external thread for mounting on radiators and Co. The two rubber rings seal the sides. Technical Data: Material: Nickel-Plated Brass Colour: Matt Black Angle: 90° Thread: G1/4 inch Connection: 1x Ø 12 mm
Now finally also with us the Black ICE Nemesis radiators The Black Ice® Nemesis® GTR radiators are the next generation of computer radiators from Hardware Labs. These radiators offer an improved cooling performance when using
Now finally also with us the Black ICE Nemesis radiators. The Black Ice® Nemesis® GTX radiators are the next generation of computer radiators from Hardware Labs. These radiators offer an improved cooling performance when using
EK-Quantum Vector FE RTX 3080 Backplate - Black is a CNC machined retention backplate made from black anodized aluminum for the EK-Quantum Vector FE RTX 3080 - Special Edition water block. The backplate covers the backside of the graphics card's PCB and serves as an aesthetic add-on. It provides additional passive cooling for the GPU core and rear of the printed circuit board VRM section. Due to the small size of both the card and the water block, the backplate boasts a ribbed design for additional passive cooling power. Enclosed EK-Quantum Vector FE RTX 3080 Backplate - Black Mounting screws Thermal pads
