With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2500 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2500 rpm, it provides an air flow of 62.8 CFM, together with a high static pressure of 2.13mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5 Technical data radiator L x W x H 279 x 120 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 19 Fan size 120mm Fan slots 2 one-sided / 4 double-sided Color black Technical data fans L x W x H 120 x 120 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.23 (Max. 0.4) A Rated Power 2.76 (Max. 4.8) W Rated Speed 0 - 2500rpm/min (±10%) Max. Air Flow 62.8CFM Max.Static Pressure 2.13mm-H2O Noise level (rated voltage, mute room, distance 1m) 33.0 (Max. 34.3) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 400mm
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:This fitting can be used to connect 16/10mm tubing with a G1/4“ connection thread. The fitting is angled by 45° and is revolvable, allowing easy hose routing in the system. Technical specifications: Material: Brass, chromatizedColour: Deep Black Dimensions:Length: 50,2mmWidth: D22,1mmHeight: 25mm Hose size compatibility : 16/10mm Extent of delivery:1 x Alphacool HF Screw connector 45° G1/4 outer thread on 16/10 revolvable - Deep Black Reviews:Xtremesystems.comPT-Reviews.pt
The Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details Material Brass Colour White Hight 20 mm Diameter 22 mm Thread length 5 mm Thread G1/4“ HardTube size 13 mm Compatibility PETG, acrylic, brass and glass tubes Weight 23 g Download Datasheet PDF: Alphacool Eiszapfen PRO 13mm HardTube Fitting G1/4 - White Sixpack Fitting Map: You can find an interactive map of all Alphacool fittings here.
Make your water cooling loop more practical and easier to modify with the new Alphacool Eiszapfen quick release fittings. High CompatabilityThe Alphacool Eiszapfen are compatible with all components as they have a ¼" external thread. You connect them exactly where you need them. Use them on radiators, reservoirs, pump tops or other suitable threads. Nothing can stop your ideas! Individual, like your systemLet your water cooling be special! For the first time, you decide whether you only need the plug, the coupling or both. Thanks to the separate Male or Female connectors you can add your Alphacool Eiszapfen to your existing system or build a new one. No Drip - No Splash - no leakAlphacool relies on the proven N.D.S.L. technology for its Eiszapfen series. This gives you the freedom to uncouple your running system without letting it drip. Turn your normal water cooling system into a high-flow system! High-quality Materials The Alphacool Eiszapfen are made of high-quality brass in two colours, Chrome or Deep Black. Technical details Dimensions: 86 x 32 x 32mm Weight: 0,040 kg
Make your liquid cooled system more practical and easier to maintain with your new Eiszapfen quick release fittings. With this fitting you can combine different versions of the quick-release couplings. There are versions with bulkhead connections, with G1/4" external thread or with G1/4" internal thread. This allows you to create the best solution for your own project. No drip - no splash - no leak Alphacool uses the proven N.D.S.L. technology (no dripping, no splash, no leaking) for its Eiszapfen series. This leaves you the freedom to decouple in your running system without dripping. Turn your normal water cooling system into a high flow system! The Eiszapfen quick release fittings are separated by simply pulling the connecting ring. The Alphacool Eiszapfen quick-release fasteners are available in various designs, but can all be combined with each other. A quick-release fastener always consists of two fittings. You always need the right counterpart to create a complete quick release fastener. With this product you only get 1 half of the quick-release fastener. Technical details: Colour: Chrome Thread: G1/4 Material: brass Diameter: 21 mm Length: 40 mm Weight: 0,035 kg
Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings! Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Double nippleThis adaptor has a 1/4" outer thread on each side. It could be used to connect two sockets with 1/4" inner threads, for example. Technical Details Material: brass Colour: black Dimensions Length: ca. 15mm Diameter: 18mm Scope of Delivery 1x Alphacool Eiszapfen double nipple G1/4 outer thread to G1/4 outer thread - black Fitting MapYou can find an interactive map of all Alphacool fittings here.
This elegant feedthrough for a vacant PCIe or PCI slot can be used to feed two coolant lines and one cable out of the PC case without drilling any holes. The feedthrough consists of a stainless steel bracket with two acetal connectors. Connection thread size is G1/4 for both external and internal side of the connector. The two acetal connectors are sealed with two o-ring gaskets. Due to the external G1/4 thread, the non-spill couplings 90108/90109 (not included in delivery) can be installed directly into the feedthrough. The feedthrough construction also provides excellent strain relief for the two coolant lines. The additional cable feedthrough can be used for round cable up to a diameter of ca. 6.5 mm, a rubber ring protects the cable in the bracket. Scope of delivery: One bracket with two-piece acetal feedthrough and rubber cable protector. Please note:Fittings are not included in delivery, please order suitable fittings for your preferred hose dimensions separately.
Acht schwarze Kühlkörper aus anodisiertem Aluminium, zwei DIMM-Blöcke aus Acrylglas, kompatibel mit allen Arbeitsspeicher-Modulen, mit DRGB-Beleuchtung
Alphacool's Eiszapfen is the high-end version of the already proven connectors and meets all the requirements placed on a connector with its high-flow, shape, processing and colour. Compatibility This slim adapter extends a ¼” thread by 10mm. This is mainly useful where a ¼” track is hard to reach or sits too far in. Design With brilliant chrome, deep matt black and decent matt white, three colour variants are available that fit perfectly into any system. Thanks to special processes, the coatings are firmly bonded to the substrate. This ensures a high longevity of the colours and prevents the coating from flaking off. Technical details Material Brass Colour White Height 10 mm Thread G1/4“ Thread length 5 mm Diameter 18 mm Weight 12 g Download Datasheet PDF: Alphacool Eiszapfen extension G1/4 outer thread to G1/4 inner thread - White Fitting Map: You can find an interactive map of all Alphacool fittings here.
120-mm-Radiator mit 44 mm Dicke, Finnen und Kanäle aus Kupfer, exklusives Modding-Design, 5x G1/4-Zoll-Anschlüsse, hochwertige Verarbeitung, geeignet für Custom-Loops
VENTO 120 Fan Series offers both functional and aesthetic heat-control management, efficiently and quietly with Rifle Bearing. The VENTO 120 ARGB further accessorizes PC desktops with lighting effects, capable of syncing most major motherboard brands.
