Firma: Arvutitark OÜ

Full-Cover-Waterblock von EK Water Blocks, für EVGA RTX 3090 Ti FTW3-Grafikkarten, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung

Kühlblock und Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA RTX 3090 Ti FTW3-Grafikkarten, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Compatibility: - NVIDIA GeForce RTX 3070 Ti Founders Edition, 8GB GDDR6X, HDMI, 3x DP Technical data cooler L x W x H 187,97 x 123,09 x 33,95 mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 11 Technical data backplate L x W x H 187,97 x 98,59 x 6 mm Material aluminium Color black

The Alphacool Aurora Acryl GPX-N RTX 3080/3090 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3080/3090 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3080/3090 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3080/3090 Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3080/3090 Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3080/3090 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3080/3090 Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data: L x W x H: 146 x 269,5 x 25 mm Material cooler: Nickle-plated copper Material cooler top: Acryl Threads: 4 x G1/4“ Thickness cooling fins: 0,6 mm Illumination: Digital RGB LEDs Power connector Digital RGB LEDs: 3-Pin JST Power Digital RGB LEDs: 5V Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards Compatibility : RTX 3080TI Gigabyte Aorus GeForce RTX 3080 Ti Xtreme 12GB (GV-N308TAORUS X-12GD) Gigabyte Aorus GeForce RTX 3080 Ti Master 12GB (GV-N308TAORUS M-12GD) RTX 3080 Gigabyte Aorus GeForce RTX 3080 Master 10G, 10GB GDDR6X, 3x HDMI, 3x DP (GV-N3080AORUS M-10GD) Gigabyte Aorus GeForce RTX 3080 Xtreme 10G, 10GB GDDR6X, 3x HDMI, 3x DP (GV-N3080AORUS X-10GD) RTX 3090 Gigabyte Aorus GeForce RTX 3090 Master 24G, 24GB GDDR6X, 3x HDMI, 3x DP (GV-N3090AORUS M-24GD) Gigabyte Aorus GeForce RTX 3090 Xtreme 24G, 24GB GDDR6X, 3x HDMI, 3x DP (GV-N3090AORUS X-24GD) Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 Aorus Master Xtreme with Backplate Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 Aorus Master Xtreme with Backplate

Vernickelter Kombi-Wasserkühler (CPU & VRAM), für das ASUS ROG Maximus Z790 Dark Hero, mit adressierbarer D-RGB-Beleuchtung, mit Velocity²-Engine für optimierten Durchfluss

Nickel-plated combo water cooler (CPU & VRAM) for the ROG Maximus Z790 Formula, with addressable D-RGB lighting, featuring the Velocity² engine for optimized flow

(14298)

The Alphacool Aurora Acryl GPX-N RTX 3070 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3070 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3070 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3070 Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3070 Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3070 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3070 Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data: L x W x H:128 x 185 x 24,5 mm Material cooler: Nickle-plated copper Material cooler top: Acryl Threads: 4 x G1/4“ Thickness cooling fins: 0,6 mm Illumination: Digital RGB LEDs Power connector Digital RGB LEDs: 3-Pin JST Power Digital RGB LEDs: 5V Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards Compatibility : - Zotac Gaming GeForce RTX 3070 Twin Edge OC, 8GB GDDR6, HDMI, 3x DP (ZT-A30700H-10P) - Zotac Gaming GeForce RTX 3070 Twin Edge, 8GB GDDR6, HDMI, 3x DP (ZT-A30700E-10P) Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 Gaming Twin Edge with Backplate Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 Gaming Twin Edge with Backplate

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital RGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Technical data cooler L x W x H 184,58 x 127,1 x 23,55 mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Illumination digital RGB LEDs Power connector digital RGB LEDs 3-Pin JST Power digital RGB LEDs 5V Technical data backplate L x W x H 184,58 x 102,6 x 6 mm Material aluminium Color black Compatibility: Zotac Gaming GeForce RTX 3070 Ti AMP Holo (ZT-A30710F-10P) Zotac Gaming GeForce RTX 3070 Ti Trinity OC (ZT-A30710J-10P) Zotac Gaming GeForce RTX 3070 Ti Trinity (ZT-A30710D-10P)

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Compatibility: - NVIDIA GeForce RTX 3090 Ti Founders Edition Technical data cooler L x W x H 220,5 x 146,40 x 23,35 mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 11 Maximum working temperature 60 °C Pressure tested 0,8 Bar Technical data backplate L x W x H 220 x 121,4 x 6 mm Material aluminium Color black

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Technical data cooler L x W x H 290 x 151 x 24mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Maximum working temperature 60 °C Illumination 11x Digital RGB LEDs Power connector Digital RGB LEDs 3-Pin JST Power Digital RGB LEDs 5V Technical data backplate L x W x H 290 x 125 x 6mm Material aluminium Color black Compatibility: EVGA GeForce RTX 3090 Ti FTW3 Ultra Hydro Copper Gaming (24G-P5-4989-KR) EVGA GeForce RTX 3090 Ti FTW3 Ultra Hybrid Gaming (24G-P5-4988-KR) EVGA GeForce RTX 3090 Ti FTW3 Ultra Gaming (24G-P5-4985-KR) EVGA GeForce RTX 3090 Ti FTW3 Gaming (24G-P5-4983-KR) EVGA GeForce RTX 3090 Ti FTW3 Black Gaming (24G-P5-4981-KR)

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Compatibility: - NVIDIA GeForce RTX 3090 Ti Founders Edition Technical data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump L x W x H 220,5 x 156,05 x 46mm Material cooler bottom Nickel plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95m Maximum flow rate 75 L/h Voltage 12V DC Power consumption 4W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners L x D 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25mm Net weight 187g Max working temperature 60°C

All-in-One-Wasserkühlung, 420-mm-Radiator, 3x 140-mm-PWM-Lüfter, integrierte RGB-Beleuchtung

For more than a decade, Alphacool has dominated the market with the NexXxoS Full Copper radiator series. Our extensive portfolio of radiator variants is unique in the world. Just like our manufacturing process, which allows us to produce all water-carrying parts and the cooling fins out of pure copper. As a result, the NexXxoS series offers the highest thermal conductivity of any radiator on the market. Thanks to their exceptional performance, the radiators can easily dissipate even extremely high waste heat and have become essential in many areas of the cooling industry.The next step in evolution: NexXxoS HPE Full Copper Radiator!The NexXxos Full Copper HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests* with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K.(* Test setup: NexXxos ST30 360mm radiator vs. NexXxos HPE-30 360mm radiator with Eisbaer cooler and 3x 120mm Rise Aurora fans and on Asus Prime x299 motherboard with Intel i9 10900x CPU with 350W waste heat)Connection options & mountingThe NexXxoS HPE radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or drain port, which can be used for filling and draining the water circuit. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required.Safety firstThe NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.Patented screw plugsAll NexXxoS HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often mean that the radiator cannot be laid flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface and allow easy installation in the case. Technical data radiatorL x W x H271,5 x 124 x 45mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)Possible fan size120mmPossible fan assembly2x one-sided / 4x both-sidedThread size fan mountingM3Pressure tested0,8 BarMaximum working temperature60°CFin density16 FPIWeight929gColorblackWarranty: 10 years???? Warranty Terms

Revolutionise your system with the All in One that changes everything. The Alphacool Eisbaer Extreme is stronger, more beautiful and quieter than anything you've seen before in the AiO water cooling market.Eisblock XPX- Freedom and maximum comfortFor the Eisbaer Extreme AiO, Alphacool relies on its award winning Eisblock XPX CPU cooler. It is known for its cooling performance at the highest level and impresses with its elegant design. Mounting is possible on all common AMD and Intel sockets. With the Eisbaer Extreme you enjoy absolute performance and quality.Progress into a New AgeAlphacool gives you the flexibility you need. Use your Eisbaer Extreme perfectly thanks to the new Eisbaer Ready quick-release couplings. These are compatible with all Eiswolf / Eisbaer quick release connections. The redesigned, powerful VPP755 Eispump gives you the flow you need.IndividualWith the Eisbaer Extreme you decide how your system is structured. You can expand this All-in-One at any time with additional components, modify it or fill it according to your desires. Whether you install the Eisbaer Extreme horizontally or vertically, it's up to you how you showcase your water cooling system. Compatibility:AMD: AM3 / AM3+ / AM4 / AM5 / FM2 / FM2+ / TR4Intel: LGA 1150 / LGA 1151 / LGA 1155 / LGA 1156 / LGA 1200 / LGA 1366 / LGA 1700 / LGA 2011 / LGA 2011-3 / LGA 2066 Technical data (general)Dimensions (LxWxH)385,5 x 156 x 64mmHousing materialaluminiumReservoirintegrated, 138mlMaintenance optionsFillport with patented screw plugTechnical data Alphacool Eispumpe VPP755 V.3ControlPWMConnection4Pin PWM / 4Pin MolexMaximum head pressure4,25mOther specificationsStartboost function, self-venting, improved software, new bearing of the ceramic axlesControl range1. 2100 rpm 120l/h | 2. 2700 rpm 140l/h | 3. 3330 rpm 280l/h | 4. 3950 rpm 320l/h | 5. 4350 rpm 340l/hTechnical data Alphacool Eisblock XPXDimensions65 x 65 x 30mmConnections2x G1/4“Pressure tested0,8 BarHousing materialaluminium/acetalMaterial bottomnickel-plated copperTechnical data fanMaterialsynthetic material (PBT UL94V-0)Bearing Typehydraulic BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Power5.4 (Max: 6.0) WControl Range0 - 2000 rpm ±10%Max. Air Flow103.03 CFMMax. Static Pressure2.81 mm/H2ONoise level38.3 (Max: 40.0) dBALife Expectance50000 h bei 25 Grad CelsiusConnection4-Pin PWMSpeed Control Modevia PWM

Wasserkühlungs-Komplettset, beeinhaltet alle notwendigen Teile für eine CPU-Kühlung, inklusive Tubes, für Custom Wasserkühlungen

The Alphacool Eisbaer Pro Aurora CPU AIO water cooler is a special development for processors with particularly large CPU dies. These include the AMD Threadripper and Epyc processors and the Intel CPUs for the LGA 3647 and LGA 4189 socket.Large cooling surfaceThe cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42 mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. The cooling fins are 0.4 mm thick and also have an optimal distance of 0.4 mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3 mm thick, which allows the heat to reach the water and be dissipated as quickly as possible.Copper radiatorAs per usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water bearing components such as the antechambers, the cooling fins and the cooling channels to which the fins are soldered. The connection threads are made of brass for strength reasons. In addition, the cooling fins are only lightly painted. On closer inspection the copper shimmers through a little. A thick lacquer coating would result in a reduction of the cooling capacity. The fin density is at optimal 15FPI. Therefore the radiator works perfectly even at low airflow. A too high fin density would require fans with higher speed to achieve the same cooling capacity. A lower fin density would no longer benefit from fast rotating fans. So the golden mean was chosen.Real water coolingThe Eisbaer Pro Aurora consists almost entirely of actual water cooling components. The extremely robust and durable TPV hoses are used in the enterprise products for servers and workstations. The hose connections also come from the Enterprise series from Alphacool and use the standard G1/4". This makes the Eisbaer Pro Aurora fully compatible with all common water cooling products. The quick-release fastener allows easy expansion of the AIO with additional components. The most important of these are the prefilled radiators and the Eiswolf GPU AIO water cooling system.Fan and lightingThe entire Eisbaer Aurora Pro cooler is equipped with addressable digital RGB LEDs. This gives a real eye-catcher in the Case. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. Inaddition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. Of courseall Digital RGB LEDs can be controlled at will. Depending on the controller almost all effects are possible.How to connect everythingThe fans are normally controlled via a 4-pin PWM connector. An included Y-adapter for the fans makes it easy to connect them to the mainboard. This allows all fans to be controlled and regulated via one connector. Each fan has a 3-pin JST connector including Y-adapter for the LED illumination. This allows the fans to be connected directly together and can also be controlled simultaneously via a controller. For the connection to a typical 3-pin 5V connector a corresponding adapter is included. Alternatively, the included Digital RGB controller can be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard.The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market.With the Alphacool LGA 4677 Mounting Bracket (article no.: 13764), this cooler is also compatible with the Intel socket LGA 4677. Compatibility:AMD: AM4 / AM5 / SP3 / SP6 / sTR5 / sWRX8 / TR4Intel: LGA 1700 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 3647 / LGA 4189 (optional) / LGA 4677 (optional) Technical data radiatorL x W x H279 x 124 x 30 mm (+/- 3% in the range of the pre-chambers)Material cooling finscopperMaterial chamberscopperMaterial cooling channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads2x G1/4"For fan size120 mmFan mounting options2 x one-sided / 4 x both-sidedTechnical data cooler and pumpL x W x H64 x 79 x 54,3 mmMaterial cooler bottomNickel plated copperMaterial cooler topPMMAThreads2 x G1/4“ (+ 1x Fillport G1/4“)Pump typDC-LT 2Pump speed2600 rpm (+/- 10%)Head of delivery1 mMaximum flow rate72 L/hVoltage6-13,5V DCPower consumption3,2WMTBF50.000 hNumber of aRGB Digital LED10Technical data tubeLength40 cmMaterial tubeTPV (EPDM/PP)Colorblack mattTube size12,7 / 7,6 mmHardness grade35 Shore-A to 50 Shore-DWorking temperature-50 to +155 °CTechnical data fittingsL x D straight fitting24 x 18 mmQuantity straight fittings4xFor tube size12,7 / 7,6 mmMaterial fittingsnylonTechnical data quick fastenersL x D95 x 27 mmMaterialnylonFor tube size12,7 / 7,6 mmColorblackTechnical data fanSpeed0 - 2500 RPMStatic pressure3,17 mm/H2OAir flow rate119,8 m³/hBearingsSleeve bearingFan connector4-Pin PWMNumber of aRGB Digital LEDFrame: 12 / Hub: 8Connection Digital aRGB3-Pin JST + 3-Pin 5VDimensions120 x 120 x 25 mmMax working temperature60 °CWarranty: 3 years???? Warranty Terms

The Eisbaer Pro ES 2U 80mm Quad HPE AIO water cooling solution features an extremely powerful NexXxos 80mm Quad full copper radiator, equipped with high-throughput 80mm ES fans. All components used come from the Enterprise Solutions water cooling segment. Alphacool's Eisbaer Pro ES 2U 80mm Quad HPE AIO is a professional all-in-one water cooling solution that is easy to install and offers the performance of a pre-assembled and pre-filled custom loop.Powerful Full Copper RadiatorThe 80mm NexXxoS radiators are specifically designed for server racks and workstations. The copper cooling fins are extremely thinly coated compared to most other manufacturers. This ensures that the cooling performance is not reduced, as a thick coating acts as insulation. The fin spacing is also optimally chosen with 10 FPI. The fins are close enough together to provide enough cooling surface area, but far enough apart to not hinder the airflow. Additionally, all cooling fins are equipped with flaps to provide controlled air turbulence, allowing the flowing air to better absorb and transport heat away from the fins.Optimal CoolingThe cooler base covers the entire surface area of the respective processors. The surface area with cooling fins is larger that of all known processor DIEs, with a size of around 55 x 42mm. This ensures that all hotspots of a CPU are optimally cooled. The cooling fins are 0.4mm thick and also have an optimal spacing of 0.4mm from each other. There are a total of 58 cooling fins on the cooler base. The cooler base is only 3mm thick, allowing the heat to quickly reach the water and be removed.Reliable PumpThe Eisbaer Pro ES cooler uses the very compact and small DC-LT 2 pump. It provides enough power to include additional components such as GPU water blocks or radiators in the water loop.High-Quality TPV TubesThe hose connections come from the normal DIY segment and use a G1/4" thread. Therefore, they can be easily replaced. The TPV hose is free of plasticizers and does not deform, unlike traditional PVC hoses, even at high temperatures.With the Alphacool LGA 4677 Mounting Bracket (article no.: 13764), this cooler is also compatible with the Intel socket LGA 4677.Attention: This set is not compatible with servers in the 1U and 2U form factor. Compatibility:AMD: AM4 / AM5 / SP3 / SP6 / sTR5 / sWRX8 / TR4Intel: LGA 1700 / LGA 2011 / LGA 2011-3 / LGA 3647 / LGA 4189 / LGA 4677 (optional) Technical data cooler with pumpDimensions (L x W x H)64 x 79 x 54,3mmTube length75cmMaterial cooler bottomnickel plated copperMaterial cooler topAcrylThreads2x G1/4“ (+ 1x Fillport G1/4“)Pump typeDC-LT2Pump speed2600 rpm (+/- 10%)Head of delivery1mMaximum flow72 L/hVoltage6-13,5V DCPower consumption3,2WPressure tested0,8 BarMaximum working temperature60°CColorblackTechnical data radiatorDimensions (L x W x H)364,5 x 80 x 60mmMaterial cooling fins, prechambers & cooling channelsCopperPressure tested1,5 BarConnectorG1/4"ColorblackTechnical data fanDimensions (L x W x H)80 x 80 x 25mmAir flow130,93 m³/hRated speed range800 - 6000 rpmRPM signal transmissionYesColorblackTechnical data tubeMaterialTPV (EPDM/PP)Tube size12,7/7,6mmHardness grade35 Shore-A to 50 Shore-DMaximum working temperature-50 to +155°CColorblack

All-in-one water cooling, 240 mm radiator, decoupled pump near the radiator, 2x 140 mm PWM fans optimized for radiator operation, integrated RGB lighting with ASUS TUF logo

The Eisbaer Pro ES 2U 80mm Triple HPE AIO water cooling solution features an extremely powerful NexXxos 80mm Triple full copper radiator, equipped with high-throughput 80mm ES fans. All components used come from the Enterprise Solutions water cooling segment. Alphacool's Eisbaer Pro ES 2U 80mm Triple HPE AIO is a professional all-in-one water cooling solution that is easy to install and offers the performance of a pre-assembled and pre-filled custom loop.Powerful Full Copper RadiatorThe 80mm NexXxoS radiators are specifically designed for server racks and workstations. The copper cooling fins are extremely thinly coated compared to most other manufacturers. This ensures that the cooling performance is not reduced, as a thick coating acts as insulation. The fin spacing is also optimally chosen with 10 FPI. The fins are close enough together to provide enough cooling surface area, but far enough apart to not hinder the airflow. Additionally, all cooling fins are equipped with flaps to provide controlled air turbulence, allowing the flowing air to better absorb and transport heat away from the fins.Optimal CoolingThe cooler base covers the entire surface area of the respective processors. The surface area with cooling fins is larger that of all known processor DIEs, with a size of around 55 x 42mm. This ensures that all hotspots of a CPU are optimally cooled. The cooling fins are 0.4mm thick and also have an optimal spacing of 0.4mm from each other. There are a total of 58 cooling fins on the cooler base. The cooler base is only 3mm thick, allowing the heat to quickly reach the water and be removed.Reliable PumpThe Eisbaer Pro ES cooler uses the very compact and small DC-LT 2 pump. It provides enough power to include additional components such as GPU water blocks or radiators in the water loop.High-Quality TPV TubesThe hose connections come from the normal DIY segment and use a G1/4" thread. Therefore, they can be easily replaced. The TPV hose is free of plasticizers and does not deform, unlike traditional PVC hoses, even at high temperatures.With the Alphacool LGA 4677 Mounting Bracket (article no.: 13764), this cooler is also compatible with the Intel socket LGA 4677.Attention: This set is not compatible with servers in the 1U and 2U form factor. Compatibility:AMD: AM4 / AM5 / SP3 / SP6 / sTR5 / sWRX8 / TR4Intel: LGA 1700 / LGA 2011 / LGA 2011-3 / LGA 3647 / LGA 4189 / LGA 4677 (optional) Technical data cooler with pumpDimensions (L x W x H)64 x 79 x 54,3mmTube length75cmMaterial cooler bottomnickel plated copperMaterial cooler topAcrylThreads2x G1/4“ (+ 1x Fillport G1/4“)Pump typeDC-LT2Pump speed2600 rpm (+/- 10%)Head of delivery1mMaximum flow72 L/hVoltage6-13,5V DCPower consumption3,2WPressure tested0,8 BarMaximum working temperature60°CColorblackTechnical data radiatorDimensions (L x W x H)284 x 80 x 60mmMaterial cooling fins, prechambers & cooling channelsCopperPressure tested1,5 BarConnectorG1/4"ColorblackTechnical data fanDimensions (L x W x H)80 x 80 x 25mmAir flow130,93 m³/hRated speed range800 - 6000 rpmRPM signal transmissionYesColorblackTechnical data tubeMaterialTPV (EPDM/PP)Tube size12,7/7,6mmHardness grade35 Shore-A to 50 Shore-DMaximum working temperature-50 to +155°CColorblack

The GIGABYTE AORUS WATERFORCE X II 240 is a high-quality processor liquid cooling system, designed to support high-performance gaming rigs and workstations. It features an efficient cooling mechanism with a 72 cfm air flow and 3.15 mm air pressure, ensuring your system remains cool. Compatibility is a key strength, with support for a wide range of sockets including LGA115x, LGA1200, LGA1700, Socket AM4, AM5, TR4, and sTR5, making it a versatile choice for various builds. The inclusion of two 120 mm ARGB fans with fluid dynamic bearings not only enhances cooling efficiency but also adds a customizable aesthetic to your setup. Additionally, the system's circular LCD display offers real-time system information, while its daisy-chain design simplifies cable management. Built with a durable copper base heatsink and an aluminum radiator, the WATERFORCE X II 240 ensures long-lasting performance and efficient heat transfer, making it a solid investment for serious PC enthusiasts.

Compressor cooling system from Alphacool, 1000 watts of cooling power, display, integrated pump

Compressor cooling system from Alphacool, 1000 watts cooling capacity, display, integrated pump

360 mm large radiator3x 120 mm fans with RGB lightingCompatible with common RGB control softwarePump with up to 5,200 RPMCompatible with common Intel and AMD socketsEskimo Junior 360 ARGB: compact all-in-one solution The all-in-one water cooling system Eskimo Junior 360 ARGB combines good looks with efficient cooling. Despite its small size, the CPU block is effective due to the copper plate. Efficient cooling A 360 mm large radiator is used as the heat exchanger for the heated coolant. It is made of aluminum and is very well suited as a heat dissipator. Its coating offers good resistance to corrosion. The three included 120 mm RGB fans ensure excellent airflow. They impress with a very quiet operating noise and a static pressure of 2.92 mmH2O. Overall, this provides maximum cooling performance with minimal noise. Integrated RGB lighting on pump and fans This is rounded off by the integrated RGB lighting on the CPU block and fans. It is not too conspicuous and contributes to the minimalist design. Additionally, it is compatible with almost all RGB control programs, allowing you to customize the lighting individually.

Extra kleines Fitting für 12-mm-Hardtubes, mit einer Höhe von nur 11,5 mm

The Arctic thermal pads are ideal for efficiently exchanging heat between different components. Thanks to the high quality of workmanship and excellent thermal conductivity, the pads are used in many places on computers and electronic components.The thermal pad, which is based on silicone and a special filler, far outperforms generic and performance-oriented pads.In a test by PC Games Hardware (11/2018), the "excellent processability and reusability in every respect" was praised. In combination with the fair price and good performance, our thermal pad was recommended as a "price-performance tip".Thanks to its low hardness and good compression properties, the thermal pad acts as a perfect gap filler and easily bridges uneven surfaces and air gaps.The ARCTIC Thermal Pads are non-adhesive and can therefore be placed precisely. Installation is child's play and therefore perfect for beginners.The pad contains no metal particles, is electrically insulating and not capacitive. Handling is therefore safe since contact with electrical parts does not lead to damage. Technical specifications:Dimensions 145 x 145 mmContents 1 pieceThickness 0.5 mmThermal conductivity 6.0 W / mKHardness 25 shore 00Relative density 3.2 g / cm³colour blueOperating temperature -40 ~ 200 ℃Volume resistance 1 X 1012 Ω-cmInterruption voltage 12 KV / mmDraw resistance 2.5 Kgf / cm²Elongation 45%Dielectric constant14.1816 ε at 60 Hz13.0264 ε at 1K Hz13.0264 ε at 1M HzFlammability V-0

Nzxt HF-28140-BW

3-pack case fans, 120-millimeter format, PWM-controlled, max. 2,000 RPM, 155.11 m³/h airflow, includes rubber dampers.

Fan ZM-AF 120 ARGB black This fan is characterized by compact dimensions of 120 x 120 x 26 mm, which allows for easy installation in most computer cases. Its speed can reach up to 2000 revolutions per minute, ensuring effective cooling of components even during intensive use of the computer. Additionally, the Fan ZM-AF 120 ARGB has the ability to adjust the rotational speed, which allows you to adjust the cooling to individual needs. One of the greatest advantages of this product is the ARGB backlight, which not only gives the computer a modern look, but also allows you to create a unique design tailored to your preferences. Thanks to the use of active air cooling, the Fan ZM-AF 120 ARGB effectively dissipates heat, preventing overheating of components and extending their life. This fan is equipped with a 4-pin connector, which guarantees a stable connection to the computer's motherboard. Despite its efficiency, the ZM-AF 120 ARGB Fan is characterized by a low noise level of only 29.7 dB, which makes the computer's operation quiet and comfortable. The set includes all the necessary accessories for installing the fan, which makes the assembly process simple and quick. Additionally, the low weight of the product (160 g) does not burden the computer's structure, which is especially important when building efficient configurations.

Case fan, with digitally addressable RGB lighting, 120-millimeter size, PWM-controlled, max. 2,000 RPM, 155.11 m³/h airflow, includes rubber dampers.

360 mm large radiator 3x 120-mm fans with RGB lighting Compatible with common RGB control software Pump with up to 2,800 RPM Compatible with mainstream Intel and AMD sockets Eskimo Junior Neon 360 ARGB: compact all-in-one solution The all-in-one water cooling system Eskimo Junior Neon 360 ARGB combines good looks with efficient cooling. Despite its small size, the CPU block is highly effective thanks to its copper plate. Efficient cooling A 360 mm radiator is used as a heat sink for the heated coolant. It is made of aluminum and is very efficient at dissipating heat. Its coating provides good resistance against corrosion. The three included 120-mm RGB fans ensure excellent airflow. They impress with very quiet operation and a static pressure of 4.28 mmH2O. Overall, this results in maximum cooling performance with minimal noise generation. Integrated RGB lighting on pump and fans The package is rounded off by the integrated and very striking RGB lighting on the CPU block and fans. In addition, it is compatible with almost all RGB control programs, allowing you to customize the lighting to your preference.

Gerader Schraubanschluss für 1/4 Zoll auf 13/10mm - vernickelt

Gerader Schraubanschluss für 1/4 Zoll auf 13/10mm - gerändelt und schwarz vernickelt

Gerader Schraubanschluss für 1/4 Zoll auf 13/10mm - gerändelt und vernickelt

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: HardTube Socket 16mmThis connector has a ¼” external screw thread on one side. The other side fits HardTubes with an external diameter of 16mm. Technical Specifications: Material: Brass Colour: Chrome Dimensions: Diameter: 21mm Height: 18mm Scope of Delivery: 1x Alphacool Eiszapfen 16mm HardTube compression fitting G1/4 for plexi- brass tubes (rigid or hard tubes) - knurled - Chrome

With the "Icicles", Alphacool has created a true masterpiece. These connections promise absolute tightness and high quality. Suitable for all hard metal pipes with an outer diameter of 12mm. On the other side of the connection there is the usual ¼” thread. Available in deep black and chrome. First, the union nut is put on the pipe, followed by a plastic washer that protects the O-ring and the thick O-ring itself. Now the pipe is simply put into the connection in which the second O-ring is already sitting, which fits very tightly against the pipe. As a last step, the union nut is pushed onto the connection and screwed on. Due to the size, the union nut cannot be screwed on tightly enough. But this has also been thought of, as an 8 mm hexagon key can be inserted from below to hold the connection in place. scope of delivery 1x Alphacool Eiszapfen 12mm HardTube screw-on nozzle G1/4 - Deep Black

Push-In Adapter, speziell für EK-Quantum Reflection², ein G1/4-Zoll-Innengewinden, aus schwarz vernickeltem Messing

Adapter von EKWB, für EK-Quantum Surface Radiatoren, G1/4-Zoll-Außen- und Innengewinde, aus mit echtem Gold beschichtetem Messing

With the new compression fittings from Alphacool for Plexi, brass or carbon tubes, Alphacool is taking a further step towards perfection and quality. The first two colours, chrome and deep black, offer great variety. The fully coordinated product series allows each system to shine in its own right, and individuality has no limits when paired with the Alphacool Plexi and brass tubes! The colouring is bound fast to the brass surface with a new chromatization process. This ensures the longevity of the intense colour and prevents chipping of the chrome layer. An Alphacool logo on the connector emphasizes the distinctive nature of this product once again. The Function of this Connector is:This connector is used to connect two 13mm Plexi, brass, or carbon tubes at a 90° angle. Dimensions: Width: 38mm Height: 38mm Technical Details: Material: brass, chromatized Colour: deep black Scope of Delivery: 1 x Alphacool HT 13mm HardTube Compression Fitting 90° L-Connector for Plexi, brass tubes - knurled - Deep black

With the new compression fittings from Alphacool for Plexi, brass or carbon tubes, Alphacool is taking a further step towards perfection and quality. The first two colours, chrome and deep black, offer great variety. The fully coordinated product series allows each system to shine in its own right, and individuality has no limits when paired with the Alphacool Plexi and brass tubes! The colouring is bound fast to the brass surface with a new chromatization process. This ensures the longevity of the intense colour and prevents chipping of the chrome layer. An Alphacool logo on the connector emphasizes the distinctive nature of this product once again. The Function of this Connector is:This connector is used to connect two 16mm Plexi, brass, or carbon tubes at a 90° angle. Dimensions: Width: 41.5mm Height: 41.5mm Technical Details: Material: brass, chromatized Colour: chrome Scope of Delivery: 1 x Alphacool HT 13mm HardTube Compression Fitting 90° L-Connector for Plexi, brass tubes - knurled - Chrome

With Alphacool’s new compression fittings for plexi, brass, or carbon tubes, Alphacool is taking another step in the direction of perfection and quality. The first two colours, chrome and deep black, offer a great variety to suit many tastes. The fully coordinated product series gives every system a chance to shine, and the customization options are endless when paired with Alphacool plexi-brass tubes! A new chromatization technique binds the colouring tightly to the brass surface. This improves the longevity of the intense colour and prevents any chipping of the chrome layer. Blue Alphacool lettering on some of the connectors also highlights the uniqueness of these parts. The function of these connectors is: This connector can be used to connect a 16mm plexi, brass, borosilicate glass, or carbon tube to a G1/4" thread. Sixpack: Since six connectors of one kind are often necessary, Alphacool is now offering Sixpacks. This has a lot of advantages for you! Technical Details: Material: chromatized brass Colour: deep black Scope of Delivery: 1x Alphacool HT 16mm HardTube compression fitting G1/4 for plexi-brass tubes (rigid or hard tubes) - knurled - deep black sixpack