Kit aus drei 120-mm-PWM-Lüftern, digital adressierbare RGB-LED-Beleuchtung (3-Pin), Drehzahl von max. 1.500 U/min, transparenter Rahmen und Lüfterblätter, inklusive Schrauben
The Alphacool Eisbaer Pro Aurora CPU AIO water cooler is a special development for processors with particularly large CPU dies. These include the AMD Threadripper and Epyc processors and the Intel CPUs for the LGA 3647 socket. With the optional XPX Pro AM4 mounting bracket, the Alphacool Eisbaer Pro CPU cooler can also be used on AMD Ryzen processors. Large cooling surface The cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42 mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. With the included AM4 bracket, cooling an AMD Ryzen processor is also child's play. The cooling fins are 0.4 mm thick and also have an optimal distance of 0.4 mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3 mm thick, which allows the heat to reach the water and be dissipated as quickly as possible. Copper radiator As per usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water bearing components such as the antechambers, the cooling fins and the cooling channels to which the fins are soldered. The connection threads are made of brass for strength reasons. In addition, the cooling fins are only lightly painted. On closer inspection the copper shimmers through a little. A thick lacquer coating would result in a reduction of the cooling capacity. The fin density is at optimal 15FPI. Therefore the radiator works perfectly even at low airflow. A too high fin density would require fans with higher speed to achieve the same cooling capacity. A lower fin density would no longer benefit from fast rotating fans. So the golden mean was chosen. Real water cooling The Eisbaer Pro Aurora consists almost entirely of actual water cooling components. The extremely robust and durable TPV hoses are used in the enterprise products for servers and workstations. The hose connections also come from the Enterprise series from Alphacool and use the standard G1/4". This makes the Eisbaer Pro Aurora fully compatible with all common water cooling products. The quick-release fastener allows easy expansion of the AIO with additional components. The most important of these are the prefilled radiators and the Eiswolf GPU AIO water cooling system. Fan and lighting The entire Eisbaer Aurora Pro cooler is equipped with addressable digital RGB LEDs. This gives a real eye-catcher in the Case. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. Of course all Digital RGB LEDs can be controlled at will. Depending on the controller almost all effects are possible. How to connect everything The fans are normally controlled via a 4-pin PWM connector. An included Y-adapter for the fans makes it easy to connect them to the mainboard. This allows all fans to be controlled and regulated via one connector. Each fan has a 3-pin JST connector including Y-adapter for the LED illumination. This allows the fans to be connected directly together and can also be controlled simultaneously via a controller. For the connection to a typical 3-pin 5V connector a corresponding adapter is included. Alternatively, the included Digital RGB controller can be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard. The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market. Data radiator L x W x H 390 x 120 x 30 mm (+/- 3%) Material cooling fins Copper Material chambers Copper Material cooling channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Data cooler and pump L x W x H 64 x 79 x 54,3 mm Number of LEDs 10x Digital RGB LEDs Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ (+ 1x Fillport G1/4“) Pump typ DC-LT Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow rate 75 L/h Voltage 12V DC Power consumption 4W MTBF 50.000 h Data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Net weight 187 g Max working temperature 60 °C Certificates CE, FC, ROHS Compatibility list: - Intel: 1700 / 2011 / 2011-3 / 2066 / 3647 Narrow & Square / LGA 4189 - AMD: AM4 / TR4 / sTRX4 / SP3 / sWRX8
OPTIMISED FOR STATIC PRESSURE During the development of the new P8 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 PWM PST is particularly suitable for use on heatsinks and radiators. MORE EFFICIENT TECHNOLOGY The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P8 PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance. MAXIMUM QUIETNESS, MINIMUM VIBRATION Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. EXTENDED LIFE SPAN A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Therefore Arctic extends the warranty to 10 years. 200 TO 3000 RPM REGULATED VIA PWM PST Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed. HIGH QUALITY BEARING Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Technical Data Performance Fan Speed: 200 - 3000 rpm Airflow: 23.4 CFM / 40.3 m³/h Static Pressure: 1 (mm/H2O) Noise Level: 0.3 Sone Fan Fan Frame: Standard Controll Typ: PST Connector: 4-Pin Connector + 4 Pin Socket Fan Bearing: Fluid Dynamic Bearing Electric Characteristics: Typical Voltage: 12 V DC Starting Voltage: 0 V Current: 0.09 A Cable Lenght: 400 mm Size & Weight Lenght: 80 mm Width: 80 mm Height: 25 mm Weight: 81 g
All-in-one liquid CPU cooler, 80.95 CFM, 2 slot ROG 120mm ARGB fan, Aura Sync RGB, LGA1700/1200 support Seventh Gen Asetek pump delivers exceptional cooling and minimal noise with an operating range starting at 840 rpm.ROG-designed addressable RGB radiator fan for optimized airflow and static pressure 81 CFMReinforced, sleeved tubing for increased durabilityIndividually addressable A-RGB and NCVM coating pump cover accentuates the sleek, modern aesthetics Styled to complement ROG motherboards, at the center stage of your buildIntel® LGA 1700, 1200, 1150, 1151, 1152, 1155, 1156, 2011, 2011-3, 2066 and AMD AM4/AM5/TR4 support
The CORSAIR iCUE H100i ELITE CAPELLIX XT Liquid CPU Cooler offers superior, high-performance cooling for your CPU, featuring CORSAIR AF RGB ELITE fans, a 240mm radiator, and brilliantly bright CAPELLIX LEDs. It is compatible with a wide range of sockets, including Intel: 1700, 1200, 1150, 1151, 1155, 1156, 2011, 2066, and AMD: AM4, sTRX4, sTR4, ensuring broad compatibility with various CPU models.
All-in-One-Wasserkühlung, 360 mm Radiator, 3x 120-mm-PWM-Lüfter optimiert für Radiatorbetrieb, integrierte RGB-Beleuchtung und optimierte Schlauchanschlüsse
The Eisbaer Aurora HPE Edition 360 CPU AIO water cooling features the extremely powerful NexXxos HPE Performance all-copper radiator equipped with the high-throughput Aurora Rise 120mm fans. All of the components used come from the classic DIY water cooling range and are also used for the most part in the enterprise products for servers. The Eisbaer LT Aurora can be expanded with additional components thanks to the quick-release fastener. Alphacool's Eisbaer Aurora HPE Edition 360 CPU AIO is a high performance all-in-one water cooling system that is as easy to install as an AIO, but offers the performance of a pre-assembled and pre-filled custom loop.New HPE Radiator!The NexXxos ST30 HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K. Radiator & PumpAs with all Alphacool products, the radiator base is made of nickel-plated copper and is equipped with very fine cooling fins that are distributed over the entire base. A nozzle plate provides an accelerated flow over the cooling fins which increases the cooling performance. The water flow is optimized so that all areas of the cooler base are cooled evenly. The Eisbaer LT Aurora cooler uses the very compact and small DC-LT 2 pump. It provides enough power to add another component such as a GPU water cooler or another radiator to the circuit.FanThe Alphacool Rise Aurora fan offers a wide control range as well as superior Digital aRGB LED lighting. The individually controllable 5V aRGB LEDs paired with the fan's special design create unique effects. The fan can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. Additionally, it offers a Zero control, which allows the fan to be regulated down to 0 RPM and then starts at approximately 350 RPM. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m³/h) paired with high static pressure (3.17mm/H₂O).DIY connections and ES hosesThe hose connections are from the normal DIY segment and therefore use a G1/4" thread. Thus, it is very easy to replace them. The black TPV hose comes, like the connectors, from the Alphacool ES series which is primarily installed in servers and workstations. The hose does not contain any plasticizers and, unlike classic PVC hoses, does not deform at high temperatures. The quick connector is not made of heavy brass, but of extremely light, durable and robust nylon. The quick disconnect is compatible with many other models in the Alphacool product line.Full Digital aRGB IlluminationThe cooler pump assembly and fans are fully equipped with Digital RGB LEDs, also known as addressable RGB or aRGB. Extensive effects can be set with the included controller or a Digital RGB controller on the motherboard. For a nice visual effect, of course, the illuminated polar bear on the cooler pump unit. For easier control via a controller, the fans and also the pump can be connected in series as a daisy chain. This enables a neat wiring of the individual LED components. Compatibility:AMD: AM4 / AM5 / SP6 / sTRX4 / sWRX8 / TR4Intel: LGA 1150 / LGA 1151 / LGA 1155 / LGA 1156 / LGA 1200 / LGA 1700 / LGA 2011 / LGA 2011-3 / LGA 2066 Technical data radiatorL x W x H391,5 x 124 x 30mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads2x G1/4"Possible fan size120mmPossible fan assembly3x one-sided / 6x both-sidedPressure tested0,8 BarMaximum working temperature60°CFin density18 FPITechnical data cooler with pumpL x W x H66 x 66 x 69mmMaterial cooler bottomnickel plated copperMaterial cooler top & reservoirnylon, acrylicThreads2x G1/4“ (+ 1x Fillport G1/4“)Pump typeDC-LT2Pump speed2600 rpm (+/- 10%)Head of delivery1 mMaximum flow rate72 L/hVoltage6-13,5V DCPower consumption3,2WPressure tested0,8 BarMaximum working temperature60°CTechnical data fansL x W x H120 x 120 x 25mmSpeed0-2500 rpm (+/- 10%)BearingSleeve BearingConnection4-Pin PWMCable length40cmVoltage12V DCCurrent consumption0,65A (0,72 max)Static pressure3,17 mm/H₂OMax. air flow118,9 m³/hNoisemax. 31,5 dB(A)Number of digital aRGB LEDs20Technical data liquidColorclearIngredient 1destilled water (CAS-Nummer 7732-18-5)Ingredient 2Glysantin (CAS-Nummer 1017-21-1)Working temperatures15C°/+90°CTechnical data quick-release couplingDimensions95 x 27mmMaterialNylonTube size12,7/7,6mmColorblackTechnical data connectorsDimensions (connection straight)24 x 18mmQuantity (connection straight)2xDimensions (connection 90°)35 x 27 x 17mmQuantity (connection 90°)2xTube size12,7/7,6mmMaterialbrassTechnical data tubeLength40cmMaterialTPV (EPDM/PP)Tube size12,7/7,6mmHardness grade35 Shore-A to 50 Shore-DMaximum working temperature-50 to +155°CColorblackWarranty: 3 years???? Warranty Terms
ROG Strix LC II 240 ARGB AIO delivers high-performance CPU liquid cooling with sleek, modern aesthetics. Featuring a closed-loop design and ARGB radiator fans, the cooler unleashes the full potential of an Intel or AMD CPU while further accentuating your build with brilliant multi-color lighting effects. With the cooling you expect from ROG, Strix LC II 240 ARGB is ready to become an essential part of your rig and light it up with your own unique style.
TUF Gaming TF120 ARGB chassis fan delivers high performance and durability in a rainbow of color. - Class-leading airflow, and low noise levels. - Advanced fluid dynamic bearing provides up to 250,000 hours of operation. - PWM control: ultra-wide RPM range allows optimal cooling for all types of workloads. - Anti-vibration pads reduce fan noise by damping rattling and vibration. - A double-layer LED array produces deeper color saturation and more lighting effects than conventional RGB fans. - Aura Sync compatibility lets you coordinate colors and lighting effects with a huge range of hardware.
High-End CPU-Wasserkühler, transparentes Acrylgehäuse mit schwarzem Cover, Kühlerboden aus .925-Sterlingsilber, für gängige Intel Sockel, mit Thermal Grizzly Kryonaut Wärmeleitpaste
High-End CPU-Wasserkühler, transparentes Acrylgehäuse mit schwarzem Cover, Kühlerboden aus .925-Sterlingsilber, für Intel Sockel 2011/2011-3/2066, mit Thermal Grizzly Kryonaut Wärmeleitpaste
Tootekood: VENTO120ARGBPWM3C-WHCWWGTIN: 4711085946621Jahutid ja lisad
XPG VENTO 120 ARGB PWM cooling fan is designed for peak performance and style, featuring a 4-Pin PWM connector, ARGB lighting effects, and a Rifle Bearing for quiet operation and durability. Its daisy-chain capability, combined with high static pressure and an auto-restart feature, ensure optimal cooling efficiency. Compatible with all major ARGB management software, it offers limitless customization options. Elevate your cooling setup with the XPG VENTO 120 ARGB PWM fan.
Tootekood: VENTOR120ARGBPWM3C-WHCWWGTIN: 4711085947109Jahutid ja lisad
The XPG VENTO R 120 ARGB cooling fan is engineered with an innovative reverse design to optimize airflow intake, keeping your system running smoothly and efficiently. Illuminate your rig with mesmerizing ARGB lighting effects, adding a touch of flair to your gaming setup. Equipped with a 4-Pin PWM connector and daisy-chain capability, installation is a breeze. Plus, the Rifle Bearing ensures quiet operation and long-term durability. Experience superior cooling performance with the auto-restart mechanism for uninterrupted gameplay sessions. Seamlessly integrate with your motherboard ARGB software for customizable lighting control. Elevate your gaming setup with the XPG VENTO R 120 ARGB fan and unleash the power of performance and style.
The CORSAIR iCUE Link RX140 MAX Expansion case fan delivers airflow performance and advanced cooling capabilities for PC enthusiasts. With a fan diameter of 140 mm, this fan operates at a rotation speed ranging from 300 to 1600 rpm, providing airflow from 27.5 to 103.5 cfm. The magnetic bearing ensures durability, while the innovative CORSAIR AirGuide technology optimizes airflow with a focus on cooling efficiency. The fan also features Pulse-width modulation (PWM) support for dynamic speed adjustments and a Zero RPM fan mode, allowing for silent operation when cooling is not needed. The package includes everything necessary for installation, including mounting screws and iCUE Link connectors, making setup seamless and straightforward.
High-performance 140mm PWM fan, up to 1,500 RPM, airflow up to 155.6 m³/h and static pressure up to 2.56 mmH2O, SSO2 bearing, with low-noise adapter, made of high-quality LCP material
Tootekood: HYPER FLOW ARGB 360 (W)GTIN: 4710562743821Jahutid ja lisad
HyperFlow ARGB 360 | Liquid | LGA1150/LGA1151/LGA1155/LGA1156/LGA1200/LGA1700/LGA2011/LGA2011-3/LGA2066/SAM3/SAM4/SAM5 | Fan speed 600-2200 10% | Air flow 76.2 cfm | Noise level, max 29.1 dB | Colour White | Weight 1.5 kg
With the Core 1 LT, Alphacool presents the light version of the proven Core 1 CPU water cooler. Housed in a polymer casing, the Core 1 LT also uses the reliable combination of 3D jetplate and cross slot-technology. This enables it to effectively dissipate the enormous waste heat of the latest desktop processors. With its elegant design, it integrates seamlessly into any water cooling system. The new mounting system is also included and simplifies installation with Intel and AMD processors.The best of new and oldAlphacool combines the best of both worlds with the Core 1 water cooler series. In addition to the new 3D jetplate, Alphacool returns to its roots by distributing the coolant evenly across the redesigned cooler base using proven cross-slot technology. Inside the cooler, O-rings ensure a precise water flow and thus guarantee effective cooling. The nickel-plated copper base of the cooler has been enlarged to achieve full coverage of large CPUs. New Mounting SystemThe mounting system has also been revised. Compared to previous Alphacool models, it requires fewer screws. First, the pre-assembly of the backplate (Intel) is done with four spacers. After that, the thermal paste is applied to the CPU. Then, the matching mounting frame is put on the CPU cooler and fastened with four nuts on the spacers.Core DesignThe functional and elegant design is a central element of the Core series from Alphacool. Its focus is on cooling performance at a fair price. The rounded corners add the perfect touch to the overall look. The Core 1 LT is available in both non-illuminated and transparent aRGB versions. Technical dataDimensions (L x W x H)71.80 x 71.80 x 28.05mmMaterial coolernickel plated copperMaterial cooler topacrylicMaterial threadsacrylicThreads2 x G1/4“Fin thickness0.4mmFin distance0.4mmPressure tested0.8 barMax working temperature60°CWeight250gColortransparent/blackWarranty: 5 years???? Warranty Terms
Product Details: Thermal Grizzly - Pro TG Putty Pro is a non-electrically conductive alternative to traditional thermal pads. This easy-to-apply and flexible material serves as a "gap filler," effectively compensating for height differences. It is an ideal replacement for thermal pads on graphics cards, where different pad thicknesses are typically used. When replacing pads or upgrading to a GPU water block, multiple thermal pad sizes are usually required. TG Putty can be applied using the included spatulas or by hand (gloves recommended). The spatula allows for smooth, even application over larger areas, while alternatively, the putty can be shaped into small beads that precisely fit components such as VRAM or SMDs. TG Putty can compensate for height differences ranging from 0.2 mm to 3.0 mm. Available Variants:TG Putty comes in three versions, each offering different levels of thermal conductivity: TG Putty Basic – Medium thermal conductivity TG Putty Advance – Good thermal conductivity TG Putty Pro – High thermal conductivity For upgrading a smaller graphics card without an active backplate (e.g., GeForce GTX 1060), a single 30g jar of TG Putty is usually sufficient. For larger models, such as the GeForce RTX 4090, one 30g jar typically covers the memory (VRAM) and voltage regulators (VRM) on the front side. Since high-end graphics cards often have a uniform gap between the PCB and the backplate, fully filling this space may require two 30g jars. Important Notes: TG Putty is not suitable for direct application on processors (IHS or Direct Die) or GPU chips. Before applying, ensure that the target surface is thoroughly cleaned and degreased using TG Cleaning Wipes or standard isopropanol. Package Contents: 1x TG Putty Pro 3x Spatulas
Tootekood: PH-F120M25_G2_DWT01GTIN: 886523003489Jahutid ja lisad
The PHANTEKS M25 Gen2 fans are ideal if you want to combine maximum cooling performance with stylish design. Thanks to their optimized blade design, high static pressure, and integrated RGB lighting with an infinity mirror, they ensure effective cooling along with an impressive look.120-mm PWM fan in whiteDaisy-chaining for fewer visible cablesOptimized for use in front of radiators or behind meshDigitally addressable RGB LEDs and infinity mirrorMax speed: 2,000 RPM at 35.13 dB(A)123.55 m³/h maximum airflow and 2.51 mmH2O static pressureRubber pads at the corners to decouple disturbing vibrations
Tootekood: PH-F140M25R_G2_DWT01GTIN: 886523003632Jahutid ja lisad
The PHANTEKS M25 Gen2 fans are ideal if you want to combine maximum cooling performance with stylish design. Thanks to their optimized blade design, high static pressure, and integrated RGB lighting with an infinity mirror, they ensure effective cooling along with an impressive look.140-mm PWM fan in whiteDaisy-chaining for fewer visible cablesOptimized for use in front of radiators or behind meshDigitally addressable RGB LEDs and infinity mirrorReverse blade for a clean look and good airflowMax speed: 1,800 RPM at 40.95 dB(A)170.02 m³/h maximum airflow and 2.04 mmH2O static pressureRubber pads at the corners to decouple disturbing vibrations
