Black top-down cooler for narrow cases A 120 mm PWM fan provides plenty of fresh airflow Six copper heat pipes for rapid heat dissipation Compatible with AMD and Intel sockets Support for high RAM modules Powerful CPU air cooler with a flat design The Akasa ALUCIA H6L M2 is a CPU cooler in a top-down design. The quiet 120 mm PWM fan offers high cooling potential. It is compatible with AMD and Intel sockets, with a TDP of up to 150 W. The six copper heat pipes ensure rapid heat dissipation. The 120 mm fan operates at 700 to 2,000 RPM and produces a very low noise level of no more than 31.5 dB(A) with a flow rate of 70.66 m³/h. The Akasa ALUCIA H6L M2 is compatible with many common AMD and Intel sockets. Thanks to its clever design, the cooler is also compatible with cases of narrow width.
Harness precision. Dominate performance. The Valkyrie Jarn CPU liquid cooler is built for those who demand relentless cooling and dazzling style. With its exceptional pump and vibrant ARGB lighting, it transforms your build into a masterpiece of power. Rotatable 360° ARGB pump top to match any build orientation Reliable, market-tested pump for consistent performance Engineered for efficient thermal performance and low noise operation Compatible with AMD AM5/AM4 and Intel LGA 1851/1700/1200 Backed by a 5-year international warranty for peace of mind
Unleash the legend. Embrace the edge. Dragonfang all-in-one liquid cooler is a predator powered by the patented, award-winning high-speed Valkyrie pump. It delivers savage cooling performance and jaw-dropping aesthetics to keep your CPU cool and your build untouchable. Fully rotatable 360° ARGB pump top for ultimate customization High-speed Valkyrie X12 ARGB fans spinning at up to 2150 RPM Compatible with AMD AM5/AM4 and Intel LGA 1851/1700/1200 Valkyrie Hub for simplified cable management (supports up to 7 devices) 5-year international warranty
A high-airflow ARGB 120mm Fluid Dynamic Bearing fan is a balanced combination of incredible aesthetics, cooling capabilities and quiet operation. Reversed fan blade design with reversed airflow compared to regular version Customizable speeds of up to 1850RPM with incredible airflow of 75CFM Fluid Dynamic Bearings for long lasting operation Quiet operation with maximum noise level of 34dB(A) Addressable RGB LEDs that illuminate fan bladesWarranty: 2 Years RGB Connector: 3-Pin A-RGB Connector Power Connector: 4-Pin PWM Connector Speed: 800 - 1850RPM ± 10% Air Flow: 75CFM / 127.42 m³/h Static Pressure: 2.23 mmH₂O Maximum noise level: 34 dBA (Max) Bearing: Fluid Dynamic Bearing Current: 0.2A Voltage: 12V
Alphacool introduces its new series of graphics card water coolers for the latest Nvidia GeForce RTX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating.The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler.The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility:- Asus TUF Gaming GeForce RTX™ 5090 32GB GDDR7 (90YV0LY1-M0NA00)- Asus TUF Gaming GeForce RTX™ 5090 32GB GDDR7 OC Edition (90YV0LY0-M0NA00) Technical data coolerDimensions total (L x W x H)235,95 x 155,57 x 34,12mmMaterial coolerchrome-plated copperMaterial cooler topAcrylicMaterial terminalNylonMaterial Connection threadBrassMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom3,25mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs9ColortransparentTechnical data backplateDimensions (L x W x H)235,95 x 127,00 x 6mmThick backplate without spacers3mmMaterialAluminiumWarranty: 3 years???? Warranty Terms
240-mm-Radiator mit 30 mm Dicke in Schwarz, bis zu vier 120er-Lüfter in Push/Pull-Betrieb, Finnen aus Kupfer und Kanäle aus Messing, exklusives Design durch Edelstahlapplikationen, kompakte Maße und hochwertige Verarbeitung, 2x G1/4-Anschlüsse
MO-RA IV Tank D5 – The perfect addition to your MO-RA IV radiator! Experience the highest quality and stylish design with the MO-RA IV tank. Made from solid acetal and equipped with a highly polished Plexiglas GS front, this tank not only offers functionality, but also a stylish upgrade for your MO-RA IV system. The brushed stainless steel cover conceals an aRGB module that indirectly illuminates the tank and reflects the finely engraved MO-RA logo. Optimized flow and easy installation The MO-RA IV tank is flow-optimized and ensures increased flow and easy venting. The direct connection to the radiator via a special connector and the integrated D5 pump guarantee maximum flow rates. Installation is child's play - just plug it on and hang it in. Thanks to the decoupling from the radiator housing, vibrations from the pump are effectively eliminated. Expandable pump modules For even more performance, the MO-RA IV tank can be expanded with an additional pump module, so that the use of two D5 pumps is possible without any problems. Technical data: Material lid: acrylic Material Body: Acetal External dimensions (L x W x H): 350x84x49mm Weight: approx. 1.35 kg Top filling openings: 2x thread G 3/8 inch Rear connection: 1x adapter to G 1/4 inch Bottom connection: 1x thread G 1/4 inch Capacity: 0.33 liters Compatible: MO-RA IV 200/400 (only one pump / no extension possible) Compatible: MO-RA IV 600 Scope of delivery: 1x MO-RA IV Tank 275 D5 1x MO-RA IV tank connection adapter G 1/4" 1x mounting material
The Gecko Pro LX is an active M.2 SSD cooler that ensures your drive does not overheat and always operates at full performance. The 20-mm fan spins at speeds of up to 12,000 RPM, with a barely audible sound level of 26 dB(A).The aluminum cooler efficiently transfers heat from your M.2 drive. With its compact size, it fits into smaller cases without looking bulky. Note that this cooler is only compatible with M.2 SSDs using the 2280 format.Technical DetailsColor: BlackMaterial: AluminumDimensions: 70 x 21.9 x 25 mm (W x H x D)Weight: 52.9 gCompatibility: M.2 2280Functionality: M.2 SSD coolerFan:Dimensions: 20 x 8 x 20Bearing: Hydrodynamic bearingSpeed: 3,600 - 12,000Noise level: 26 dB(A)
The Lian Li UNI FAN TL LED Wireless fans impress with their elegant look, visually enhancing your setup. The modular system, in particular, ensures a tidy build. Your hardware will be kept cool—even under heavy load. 140 mm PWM fan Less cable clutter thanks to practical plug-in system and daisy chain Full control over the fan with the L-Connect 3 software Infinity mirror and LED strips on the side create an elegant look High airflow of 176.5 m³/h and static pressure up to 2.34 mmH2O Lian Li UNI FAN TL LED Wireless: RGB fan with stylish design The Lian Li UNI FAN TL LED Wireless is a 140 mm fan with standard-oriented white fan blades. Thanks to its high cooling performance, this PC fan is also suitable for high-end systems! Impressive cooling performance High airflow of up to 176.5 m³/h and static pressure up to 2.34 mmH2O, together with up to 1,800 RPM, result in effective cooling of your gaming hardware. The increased height of 28 mm further promotes cool temperatures. Despite its high cooling performance, the fan is hardly audible at full load with no more than 29 dB(A). Smart plug-in system and daisy-chaining Thanks to the practical plug-in system, individual fans can be easily connected together. You need fewer cables, making your build look much cleaner. The Lian Li Wireless Controller, which is connected to the motherboard and can link to the fans, further reduces cable clutter. Note that the wireless controller must be purchased separately. You can also combine the LCD version with the LED version fans, as long as you do not connect more than four fans to one controller. The plug-in system is not only practical, but also enables a seamless transition between fans. This particularly benefits the LED strips along the edges—when connected, chic RGB effects can be set. The infinity mirror also gives the fan an appealing look.
Dust can be a computer system’s worst enemy as it has the potential to lower cooling performance or cause damage when left overly accumulated. But most fan filters are a hassle to install so SilverStone created an easy to use FF123 fan filter.The FF123 has embedded magnet in its frame so it can be effortlessly attached to any steel chassis without tools. So for those looking for dust reduction for component longevity with increased cooling efficiency, the FF123 is an excellent buy.- Convenient magnetized design for easy installation- Ultra fine filter provides great dust reduction properties- Compatible with most 120mm fans or ventsWeight & dimensionsWidth 120 mmDepth 1.5 mmHeight 120 mmWeight 13.6 gDesignBlackPerformanceSuitable for ChipsetFan diameter 120 mmCompatible processor series No
Dust can be a computer system’s worst enemy as it has the potential to lower cooling performance or cause damage when left overly accumulated. But most fan filters are a hassle to install so SilverStone created an easy to use FF123 fan filter.The FF123 has embedded magnet in its frame so it can be effortlessly attached to any steel chassis without tools. So for those looking for dust reduction for component longevity with increased cooling efficiency, the FF123 is an excellent buy.Technical detailsWhiteWeight & dimensionsWidth 120 mmDepth 1.5 mmHeight 120 mmWeight 13.6 g
The nickel-plated adapter from Bitspower in the color shiny silver, has a 90 degree angle and is rotatable. One side is intended for mounting hard tubes with an outside diameter of 12mm and the other side has a G1/4" external thread for mounting on radiators and Co. The two rubber rings seal the sides. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Silver Angle: 90° Thread: G1/4 inch Connection: 1x Ø 12 mm
The compact aquarium pumps for use under water The EHEIM compactON aquarium pump is characterized by its name through a compact design and is thanks to the included accessory bag appropriate for versatile use – the EHEIM compactON 2100-5000 can also be modified for the use outside of the water. Thanks to the high quality material it is also possible to use them without problems in marine water. For even more flexibility, the flow rate is adjustable for all models, except for the EHEIM compactON 5000. Advantages of the EHEIM compactON Successor of the compact and compact+ series Fastening by means of robust suction cups Including accessories such as suction basket and threaded coupling Silent due to ceramic bearing (EHEIM compactON 2100 and EHEIM compactON 3000) High pump performance at low power consumption compactON 5000 as electronic version for more efficiency Technical Details: Pump power per hour at 50 Hz: of 400 l Pump power per hour at 50 Hz: to 1000 l Pumping head at 50 Hz approx. (H max): 1.4 m Power at 50 Hz: of 15.00 watt Dimensions (WxHxD) 47 x 79 x 73mm Hose Ø pressure side: 16mm voltage 230 volt Frequency 50 Hz Standard power plug EUR Freshwater yes Sea water yes Manual in multiple languages (DE, FR, EN) Manual in multiple languages (ES, IT, PT, NL)
ROG Strix LC II 280 ARGB AIO delivers high-performance CPU liquid cooling with sleek, modern aesthetics. Featuring a closed-loop design and addressable RGB radiator fans, the cooler unleashes the full potential of an Intel or AMD CPU while further accentuating your build with brilliant multi-color lighting effects. With the cooling you expect from ROG, Strix LC II 280 ARGB is ready to become an essential part of your rig and light it up with your own unique style.
The SilverStone Nitrogon is a low-profile CPU cooler designed specifically for Intel LGA 1700 sockets, featuring a compact and versatile top-down design. With a minimal height of just 45mm, it is perfect for slim and small form factor systems. The cooler includes a 92mm fan for efficient cooling performance. Its dimensions are 10.5cm in width, 9.7cm in height, and 10.6cm in length, and it weighs 290 grams. For more details, visit the SilverStone website.
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: 90° Socket 16/10mmThis connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 16/10mm hose. The middle of this connector is turned at a 90° angle in order to prevent complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Length: 35.5mm Width: 22mm Height: 34.5mm Scope of Delivery: 1x Alphacool Eiszapfen 16/10mm compression fitting 90° rotatable G1/4 - deep black
The new Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details: Material: brass Colour: chrome Diameter: 22 mm Height: 20 mm Thread: G1/4" Thread length: 5 mm HardTube size: 13 mm Compatibility: PETG, acrylic, brass and glass tubes Weight: 0,023 kg Scope of supply: 1x Alphacool Eiszapfen PRO 13mm HardTube Fitting G1/4 - Deep Black Sixpack
The Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details Material Brass Colour White Hight 20 mm Diameter 22 mm Thread length 5 mm Thread G1/4“ HardTube size 13 mm Compatibility PETG, acrylic, brass and glass tubes Weight 23 g Download Datasheet PDF: Alphacool Eiszapfen PRO 13mm HardTube Fitting G1/4 - White Sixpack Fitting Map: You can find an interactive map of all Alphacool fittings here.
High-End CPU-Wasserkühler, transparentes Acrylgehäuse mit schwarzem Cover, Kühlerboden aus .925-Sterlingsilber, für gängige Intel Sockel, mit Thermal Grizzly Kryonaut Wärmeleitpaste
240-mm-Radiator mit 44 mm Dicke, Finnen und Kanäle aus Kupfer, exklusives Modding-Design, 5x G1/4-Zoll-Anschlüsse, hochwertige Verarbeitung, geeignet für Custom-Loops
360-mm-Radiator mit 44 mm Dicke, Finnen und Kanäle aus Kupfer, exklusives Modding-Design, 8x G1/4-Anschlüsse, hochwertige Verarbeitung, geeignet für Custom-Loops
Precise inline flow sensor with magnetic measuring system, with temperature sensor, measures coolant quality, with RGB lighting and RGBpx output, two G1/4-inch threads, suitable for systems with approximately 35 l/h to 1,000 l/h flow rate.
