Firma: Arvutitark OÜ

The Alphacool Aurora Acryl RADEON RX 6800/6900(XT) Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX EisblockMore Performance!During the development of the EIsblock Aurora RADEON RX 6800/6900(XT) graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.New Design!The Eisblock Aurora RADEON RX 6800/6900(XT) cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora RADEON RX 6800/6900(XT) Eisblock cooler its very own unique identity.Copper or Aluminium?Of course, Alphacool only uses copper for its water coolers. With the Aurora RADEON RX 6800/6900(XT) Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling.Is There Anything Else New?The Eisblock Aurora RADEON RX 6800/6900(XT) also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler.The Alphacool Aurora RADEON RX 6800/6900(XT) Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Compatibility:- Asus ROG Strix Radeon RX 6800 OC, ROG-STRIX-RX6800-O16G-GAMING, 16GB GDDR6 (90YV0FL1-M0NM00)- Asus TUF Gaming Radeon RX 6800 OC, TUF-RX6800-O16G-GAMING, 16GB GDDR6 (90YV0FM1-M0NA00)- Asus ROG Strix Radeon RX 6800 XT OC, ROG-STRIX-RX6800XT-O16G-GAMING, 16GB GDDR6- Asus TUF Gaming Radeon RX 6800 XT OC, TUF-RX6800XT-O16G-GAMING, 16GB GDDR6 (90YV0FL1-M0NM00)- Asus TUF Gaming Radeon RX 6900 XT OC, TUF-RX6900XT-O16G-GAMING, 16GB GDDR6 (90YV0GE0-M0NM00) Data coolerDimension (L x W x H)152 x 277 x 23 mmMaterial coolerNickle-plated copperMaterial cooler topAcrylThreads4 x G1/4“Thickness cooling fins0,6 mmIlluminationDigital RGB LEDsPower connector Digital RGB LEDs3-Pin JSTPower Digital RGB LEDs5VColortransparentTechnical data backplateAbmessungen (L x W x H)127,5 x 277 x 6 mmMaterialAluminiumColorBlack

The replacement screws for the Alphacool Eisblock XPX Pro CPU water cooler are used for mounting on the Intel LGA 3647 socket. Technical details: Scope of delivery: 4x M4 head screw groove

The Eisbaer LT 92 has been launched especially for small form factor cases. The space SFF cases is extremely limited, therefore the Eisbaer LT 92 differs in several points from the normal Eisbaer LT.Perfect for SFF casesThe cooling block and pump unit is only 40 mm high; this means it is smaller than the IO panel on the mainboard. This ensures that the Eisbaer LT 92 fits into almost every compact case on the market. The hose length is only 25 cm which means it is optimal for small cases in which the laying of long hoses can become a torture. This is one of the reasons why Alphacool does not use the usual quick release fasteners in the Eisbaer LT 92. Due to the compact dimensions of SFF cases, quick release fasteners can often be too cumbersome. Uncompromising with the materialsAs is usual with Alphacool, the radiator is made of copper and comes from the well-known NexXxoS series. The antechambers, cooling fins and the water channels are made entirely of copper. The heat capacity of copper is almost twice as high as that of aluminium, which is particularly noticeable when the radiator is driven to its performance limit. When a comparable aluminium radiator fails, the copper radiator really gets going. The cold plate of the Eisbaer LT 92 is also made of nickel-plated copper. The TPV hoses and TPV connections with G1/4" thread come from the Enterprise Solution series for servers and workstations.PumpThe DC-LT 2 pump is already used in the normal Eisbaer, Eisbaer Aurora and the other Eisbaer LT CPU AIO water coolers. Its silent capabilities have already been confirmed in various tests of its sister models. The pump rotates at 2600 rpm and generates no significant vibrations. The DC-LT is a powerful pump that is also used for larger loops and offers a high flow rate.The Alphacool Eisbaer LT 92 is the perfect partner for SSF housing cases and has been specially designed for them. The compact 92 mm full copper radiator offers more than enough power for powerful processors with an appropriate fan. Compatibility:AMD: 754 / 939 / 940 / AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5 / C32 / FM1 / FM2 / FM2+ / G34Intel: LGA 1150 / LGA 1151 / LGA 1156 / LGA 1200 / LGA 1366 / LGA 1700 / LGA 1851 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 755 Technical data radiatorL x W x H134 x 92 x 30 mm (+/- 3%)Material cooling finsCopperMaterial chambersCopperMaterial cooling channelsCopperMaterial threadsBrassMaterial outer housingstainless steelG 1/4“ threads2 x for tubesFor fan size92 mmPossible fan assembly1 x one-sided / 2 x both-sidedTechnical data cooler with pumpL x W x H69 x 69 x 39 mmMaterial cooler bottomNickel-plated copperMaterial cooler topPMMAThreads2 x G1/4“ (+ 1x Fillport G1/4“)Pump typDC-LT 2Pump speed2600 rpm (+/- 10%)Head of delivery1 mMaximum flow rate72 L/hVoltage6-13,5V DCPower consumption3,2WMTBF50.000 hTechnical data liquidColorClearIngredient 1Destilled water (CAS-Nummer 7732-18-5)Ingredient 2Glysantin (CAS-Nummer 1017-21-1)Working temperatures-15 C° / +90 °CTechnical data fittingsL x D straight fitting24 x 18 mmQuantity straight fittings2xL x B x H 90° fitting35 x 27 x 17 mmQuantity 90° fittings2xFor tube size12,7 / 7,6 mmMaterial fittingsBrassTechnical data tubeLength25 cmMaterial tubeTPV (EPDM/PP)ColorMatt blackTube Size12,7 / 7,6 mmHardness grade35 Shore-A to 50 Shore-DWorking temperature-50 to +155 °C

The Alphacool Eisblock Aurora GPX-N Acrylic Active Backplate for Geforce RTX 3080/3090 graphics cards is the perfect upgrade for Alphacool's Eisblock Aurora Acrylic GPX-N GPU custom water coolers as well as Alphacool's Eiswolf 2 GPU AIOs (see compatibility details). With the help of the backplate, consisting of nickel-plated copper, the back of Geforce RTX 3080/3090 graphics cards can now also be actively water-cooled, thus achieving a significant increase in cooling performance.Connection optionsThere are 2 different ways to incorporate the backplate into your existing watercooling loop: Variant 1The cooler has an inlet and outlet with G1/4" internal thread on the top side respectively. With suitable connections and hoses/hard tubes, the backplate can be easily integrated into the water circuit. Variant 2The cooler has an inlet and outlet on the side suitable for 5/3mm hoses. With the help of Alphacool's MCX 2x manifold with 5/3mm tubing (item 1022250), the active backplate can be easily integrated into the water circuit in a space-saving way. This variant is a sensible choice if there is little space in the PC case and tubing runs will be difficult to do. (Note: Only works with Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers. Cannot be used in combination with Alphacool Eiswolf 2 AIOs!)The connection options are very flexible for both variants, as the inlet and outlet can be freely selected depending on the design.Brilliant illuminationSix addressable digital RGB LEDs are directly recessed and run along the sides of the entire cooling block. This illuminates the entire cooling block and creates unique lighting effects. The Digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a Digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a Digital RGB capable motherboard. Compatibility:- Alphacool Eiswolf 2 AIO - 360mm RTX 3080/3090 ROG Strix with backplate (article number: 14418)- Alphacool Eisblock Aurora Acryl GPX-N RTX 3090/3080 ROG Strix with backplate (article number: 11940) Technical dataL x W x H266,6 x 129 x 13,3 mmMaterial backplatecopper, nickel-platedMaterial cooleracrylicThreads Water cooling2x G1/4" | 2x 5/3mm tube connectionIllumination6x digital addressable RGB LEDsPower connector digital aRGB LEDs3-pin JST (male & female switch)Power digital aRGB LEDs5VMaximum working temperature60 °CPressure tested0,8 BarWeight925 g

The Alphacool Eisblock Aurora GPX-N Acrylic Active Backplate for Geforce RTX 3080/3090 graphics cards is the perfect upgrade for Alphacool's Eisblock Aurora Acrylic GPX-N GPU custom water coolers (see compatibility details). With the help of the backplate, consisting of nickel-plated copper, the back of Geforce RTX 3080/3090 graphics cards can now also be actively water-cooled, thus achieving a significant increase in cooling performance.Connection optionsThere are 2 different ways to incorporate the backplate into your existing watercooling loop: Variant 1The cooler has an inlet and outlet with G1/4" internal thread on the top side respectively. With suitable connections and hoses/hard tubes, the backplate can be easily integrated into the water circuit. Variant 2The cooler has an inlet and outlet on the side suitable for 5/3mm hoses. With the help of Alphacool's MCX 2x manifold with 5/3mm tubing (item 1022250), the active backplate can be easily integrated into the water circuit in a space-saving way. This variant is a sensible choice if there is little space in the PC case and tubing runs will be difficult to do. (Note: Only works with Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers. Cannot be used in combination with Alphacool Eiswolf 2 AIOs!)The connection options are very flexible for both variants, as the inlet and outlet can be freely selected depending on the design.Brilliant illuminationSix addressable digital RGB LEDs are directly recessed and run along the sides of the entire cooling block. This illuminates the entire cooling block and creates unique lighting effects. The Digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a Digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a Digital RGB capable motherboard. Compatibility:- Alphacool Eisblock Aurora Acryl GPX-N RTX 3090 TI Founders Edition with Backplate (article number: 13056) Technical dataL x W x H220,5 x 121,4 x 13,3 mmMaterial backplatecopper, nickel-platedMaterial cooleracrylicThreads Water cooling2x G1/4" | 2x 5/3mm tube connectionIllumination6x digital addressable RGB LEDsPower connector digital aRGB LEDs3-pin JST (male & female switch)Power digital aRGB LEDs5VMaximum working temperature60 °CPressure tested0,8 BarWeight753 g

Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht.The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component. Technical dataDimensions (L x W x H)100 x 100 x 0,5mmThermal conductivity7W/mKColorpink

Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht.The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component. Technical dataDimensions (L x W x H)120 x 20 x 1mmThermal conductivity7W/mKColorpink

Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht.The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component. Technical dataDimensions (L x W x H)120 x 20 x 1,5mmThermal conductivity7W/mKColorpink

The Eisschicht from Alphacool can, like other thermal pads, compensate for the irregularities of heat sinks and the elements to be cooled. But it has a great feature: The Eisschicht consists of thermal paste with an embedded mesh! This ensures that the performance of these pads is much more efficient than normal thermal pads, regardless of the low W/mK value. In addition, a better distribution and filling between the surfaces is achieved. This also results in better air displacement. Due to their soft consistency, there is also no pressure on components or solder joints. Nvidia also uses this kind of pads for the Founders Edition. The Eisschicht can be easily cut to the desired size and attached to heat sinks without slipping.As a basic component or spare part, thermal pads belong in every well-organized computer tinkering corner! Technical dataDimensions (L x W x H)100 x 100 x 1mmThermal conductivity3 W/mKElectrical ConductiveNoColorwhite

The Alphacool Eisschicht Ultra Soft are the ultimate in thermal pads. Their outstanding properties mean they can almost be compared to thermal paste. The Eisschicht Ultra Soft pads fit much better to components, which contributes to excellent cooling performance.Better than standard thermal pads?The ultra-soft material of the Eisschicht Ultra Soft thermal pads acts in a similar way to thermal paste. While normal thermal pads are simply pressed together by the contact pressure, which can lead to uneven contact pressure on components of different heights, this is almost impossible with the Eisschicht Ultra Soft thermal pads. The material spreads as well as thermal paste and thus prevents the highest components from being subjected to increased contact pressure from the cooler. In the worst case, this can lead to the PCB bending. The soft consistency also fills in any uneven areas much better. The Eisschicht Ultra Soft thermal pads therefore cling much better to the components, which of course benefits heat transfer.But that’s not the only advantage!The special material also cannot dry out. Usually the silicone in thermal pads bleeds over time. This causes them to become hard and the performance of the pads drops rapidly at a certain point. This is not the case with the Eisschicht Ultra Soft thermal pads. They can be used for a much longer period of time without losing any significant performance.A thermal pad with fabric?The consistency of the heat-conducting material is similar to a viscous thermal paste. A special fabric is embedded so that the material remains stable and can be used as a thermal pad. This ensures perfect distribution of the material if the element to be cooled has an uneven shape. Examples of this include voltage converters, VRam and similar electronic components of all kinds that require cooling.Cropping? No problem!When cutting the thermal pads, you should definitely leave the foil on the pads. This means that the pads can be easily cut to size with scissors. It's just as easy as cutting paper. The cut edges stay perfectly clean and don't fray.The Alphacool Eisschicht Ultra Soft thermal pads are superior to the usual thermal pads in many ways and are also used in all new Eisblock Aurora graphics card coolers from Alphacool. Technical dataDimensions (L x W x H)100 x 100 x 3mmThermal conductivity3 W/mKElectrical ConductiveNoColorwhite

The Alphacool Aurora Acryl GPX Eisblock combines style with performance and extensive digital RGBlighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent highquality and fantastic performance. This perfectly describes the Aurora Acryl GPX EisblockMore Performance!During the development of the EIsblock Aurora GPX graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components byreducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-platedcopper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has alsobeen optimized. All important components such as the voltage transformers and the memory are nowsignificantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.New Design!The Eisblock Aurora GPX cooler has been designed so that lighting is more important than the previousmodels. The addressable digital RGB LEDs are embedded directly into the cooling block and run alongthe entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotesbetter light diffusion in the water cooler due to the reflections on these bevels. In addition, they createvarious contours, which give the Aurora GPX Eisblock cooler its very own unique identity.Copper or Aluminium?Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX Eisblock, the copperis nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking.Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermalconductivity of aluminium and is therefore clearly the better material for water cooling.Is There Anything Else New?The Eisblock Aurora GPX also relies on the new patented stop fittings, which sit flush with the surface ofthe terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On thefront of the terminal you can see the corresponding names of the compatible graphic card types. Ofcourse, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card watercooler.The Alphacool Aurora GPX Acryl is a complete redevelopment of the previous Alphacool graphics cardwater coolers. No technical compromises were made, but the entire technical know-how flowed into thedevelopment and implementation. Compatibility:- Sapphire Pulse Radeon RX 5600 XT, 6GB GDDR6 (11296-01-20G)- MSI Radeon RX 5700 Evoke OC, 8GB GDDR6 (V381-024R)- MSI Radeon RX 5700 Evoke, 8GB GDDR6- MSI Radeon RX 5700 Mech OC, 8GB GDDR6 (V381-005R)- MSI Radeon RX 5700 Mech, 8GB GDDR6- Sapphire Pulse Radeon RX 5700 8G, 8GB GDDR6 (11294-01-20G)- MSI Radeon RX 5700 XT Evoke OC, 8GB GDDR6 (V381-001R)- MSI Radeon RX 5700 XT Evoke, 8GB GDDR6- MSI Radeon RX 5700 XT Mech OC, 8GB GDDR6 (V381-003R)- MSI Radeon RX 5700 XT Mech, 8GB GDDR6- Sapphire Pulse Radeon RX 5700 XT 8G, 8GB GDDR6 (11293-01-20G) Technical data GPU coolerDimension (B x T x H)123 x 228 x 30 mmMax working temperature60 °CMaterial coolernickel plated copperMaterial topacrylThikness of fins0,6 mmThreads4 x G1/4“Power supply Digital RGB3-Pin 5VPressure tested1,5 BarColortransparent

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.Fullcover Waterblock?The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.PumpThe Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.Fittings and TubingAs with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.ExpandabilityBy using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.Lighting and fansThe Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.NexXxoS RadiatorAs with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.Technical note!Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility:- Asus ROG Strix LC GeForce RTX 3090 Ti OC, ROG-STRIX-LC-RTX3090TI-O24G-GAMING, 24GB GDDR6X (90YV0HC0-M0NA00)- Asus ROG Strix LC GeForce RTX 3090 Ti, ROG-STRIX-LC-RTX3090TI-24G-GAMING, 24GB GDDR6X (90YV0HC2-M0NA00)- Asus TUF Gaming GeForce RTX 3090 Ti OC, TUF-RTX3090TI-O24G-GAMING, 24GB GDDR6X (90YV0HC1-M0NA00)- Asus TUF Gaming GeForce RTX 3090 Ti, TUF-RTX3090TI-24G-GAMING, 24GB GDDR6X (90YV0HC3-M0NA00) Technical data radiatorL x W x H395 x 124 x 30mm (+/- 3%)Material cooling fins, chambers & channelsCopperMaterial threadsBrassMaterial outer housingstainless steelG 1/4“ threads2 x for tubes (+ 1x Fillport G1/4“)For fan size120 mmPossible fan assembly3 x one-sided / 6 x both-sidedTechnical data cooler and pumpL x W x H267 x 161,84 x 48,23mmMaterial cooler bottomChrome plated copperMaterial cooler topacrylicThreads2 x G1/4“Pump typeDC-LT 2Pump speed2600 rpm (+/- 10%)Head of delivery1 mMaximum flow rate72 L/hVoltage6-13.5V DCPower consumption3.2WMTBF50.000 hTechnical data liquidColorclearIngredient 1Destilled water (CAS-number 7732-18-5)Ingredient 2Glysantin (CAS-number 1017-21-1)Working temperatures-15 C° / +90 °CTechnical data quick fastenersL x D95 x 27mmMaterialNylonFor tube size12,7 / 7,6mmColorBlackTechnical data fittingsL x D straight fitting24 x 18mmQuantity straight fittings2xL x B x H 90° fitting35 x 27 x 17mmQuantity 90° fittings2xFor tube size12,7 / 7,6mmMaterial fittingsBrassTechnical data tubeLength50cmMaterial tubeTPV (EPDM/PP)ColorMatt blackTube size12,7 / 7,6mmHardness grade35 Shore-A to 50 Shore-DWorking temperature-50 to +155 °CTechnical data fanSpeed0 - 2500 RPMStatic pressure3,17 mm H2OAir flow rate119,8 m³/hBearingsSleeve bearingFan connector4-Pin PWMConnection Digital aRGB3-Pin JST + 3-Pin 5VDimensions120 x 120 x 25mmNet weight187gMax working temperature60°C

Vernickelter Kombi-Wasserkühler (CPU & VRAM), für das ASUS ROG Strix Z790-I GAMING, mit adressierbarer D-RGB-Beleuchtung und Velocity-Engine für optimierten Durchfluss

Alphacool introduces its new series of graphics card water coolers for the latest Nvidia GeForce RTX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating.The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler.The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility:- Inno3D Inno3D GeForce RTX™ 5080 iChill Frostbite (C50803-16D7X-1760FB)- Inno3D Inno3D GeForce RTX™ 5080 iChill X3 (C50803-16D7X-176069H)- Inno3D Inno3D GeForce RTX™ 5080 X3 (N50803-16D7-176068N)- Inno3D Inno3D GeForce RTX™ 5080 X3 OC (N50803-16D7X-17603930)- Inno3D Inno3D GeForce RTX™ 5080 X3 OC White (N50803-16D7X-17605211) Technical data coolerDimensions total (L x W x H)160 x 124,07 x 34,19mmMaterial coolerchrome-plated copperMaterial cooler topAcrylicMaterial terminalAcetalMaterial Connection threadBrassMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom3,25mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs7ColortransparentTechnical data backplateDimensions (L x W x H)160 x 95,36 x 6mmThickness backplate without spacers3mmMaterialAluminiumWarranty: 3 years???? Warranty Terms

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 1mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 1,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 0,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 0,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 1mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Push-in fitting from EKWB, for EK-Quantum Reflection² Distroplates, with 4.5 mm external thread length, with two G1/4-inch threads, made from gold-coated brass

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 1,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 2mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 3mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability. Better than standard thermal pads? The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer. Increased service life! The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance. Versatile use! Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal pad Dimensions (L x W x H) 120 x 20 x 1,5mm Thermal Conductivity (ASTM D5470) 6.2 W/mK (±10%) Hardness (ASTM D412) 50 (Shore 00) (±15) Working temperature -50 to ~150°C Volume Resistance (ASTM D257) 1×10¹³ Ohm-m Dielectric Breakdown Voltage (ASTM D149) 6 KV/mm (±10%) Density (ASTM D792) 3.1 g/cm³ (±10%) Elongation (ASTM D412) 50% Weight Loss (ASTM E595) less than 1% Flame Rating (UL 94) V-0 Color blue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 0,5mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 1mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability. Better than standard thermal pads? The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer. Increased service life! The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance. Versatile use! Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal pad Dimensions (L x W x H): 120 x 20 x 0,5mm Thermal Conductivity (ASTM D5470): 9.0 W/mK (±10%) Hardness (ASTM D2240): 50 (Shore 00) (±15) Working temperature: -50 to ~180°C Volume Resistance (ASTM D257): 1×10¹² Ohm-m Dielectric Breakdown Voltage (ASTM D149): ≥8 KV/mm Density (ASTM D792): 3.2 g/cm³ (±10%) Elongation (ASTM D412): 40% Weight Loss (ASTM E595): less than 1% Flame Rating (UL 94): V-0 Color: pink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability. Better than standard thermal pads? The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer. Increased service life! The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance. Versatile use! Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal pad Dimensions (L x W x H): 120 x 20 x 1mm Thermal Conductivity (ASTM D5470): 9.0 W/mK (±10%) Hardness (ASTM D2240): 50 (Shore 00) (±15) Working temperature: -50 to ~180°C Volume Resistance (ASTM D257): 1×10¹² Ohm-m Dielectric Breakdown Voltage (ASTM D149): ≥8 KV/mm Density (ASTM D792): 3.2 g/cm³ (±10%) Elongation (ASTM D412): 40% Weight Loss (ASTM E595): less than 1% Flame Rating (UL 94): V-0 Color: pink

Alphacool's double-sided adhesive Core thermal pad can be used to cool electronic components of all kinds where it is important to effectively dissipate waste heat. This significantly improves the performance and durability of the components. The assembly is significantly simplified by the material-related tackiness.Flexible and PowerfulDue to its material composition, the thermal conductive pad is reliable and powerful. With its low thickness, it offers a wide range of application possibilities. It can be flexibly cut to size for individual needs. The adhesive nature allows effortless mounting of electrical components such as DDR modules, motherboard components or power supplies. Technical dataDimensions (L x W x H)50 x 50 x 0.25mmThermal Conductivity (ASTM D5470)1 W/mK ±10%Thickness (ASTM D374)0.25 mmReinforcement CarrierFiberglass meshContinuous Working Temperature-30~+120 °CShort time use temperature (30sec)180 °CDensity (ASTM D792)1.2 g/cm³Holding Power 1000g@25° Cusing 1 in² (PSTC-7)>3000 min180° Peeling Strength (aluminum) (PSTC-101)>16 N / 25mmDielectric Breakdown Voltage (AC) (ASTM D149)3 KV ±10%Thermal Impedance @10psi (ASTM D5470)1.26 C-in² / WThermal Impedance @30psi (ASTM D5470)1.06 C-in² / WThermal Impedance @50psi (ASTM D5470)1.05 C-in² / WColorwhite

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 1mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 1,5mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 2mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 3mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

The PHANTEKS Glacier EZ-Fit 140RES-D5 combines elegant design with powerful functionality and fits perfectly with any gaming PC. With a 210 ml water reservoir and an integrated D5 pump, it offers a space-saving solution for optimal cooling performance—even in compact systems. Thanks to versatile connectivity options and easy mounting on radiators or fans, the 140RES-D5 is a flexible choice for any custom loop system. Reservoir with D5 pump compatibility Simple design that fits any gaming PC 210 ml capacity with a 164 mm height fits even in small systems One G1/4 thread and four M24 threads simplify installation, adding and removing water Integrated D5 pump for ample flow

Valkyrie Dragonfang 240 ARGB

Zalman ZM-4PALC

Zalman Alpha2 DS A240 White - All-in-One Liquid Cooling with Innovative DisplayThe Zalman Alpha2 DS A240 White is a high-performance all-in-one liquid cooler that delivers optimal cooling while standing out with its unique design and customization options. Highlights: Monitoring and Style: A 2.73-inch IPS LCD display on the pump provides real-time system temperature monitoring. Customize the display with your own images or videos to give your PC a unique look! Efficient Cooling: Three Zalman AF120 fans with Shark Fin Blades ensure optimized airflow and quiet operation. The 240mm aluminum radiator offers maximum cooling surface for your CPU. Easy Control: Manage fans and RGB lighting easily via the ZM-OZ software and ZM-OZ HUB controller. The Daisy-Chain Cable Connector simplifies clean cable management. Wide Compatibility: Compatible with Intel sockets (LGA 1851 / 1700 / 1200 / 115X) and AMD sockets (AM5 / AM4). Technical Specifications: Pump: Dimensions: 72 x 72 x 65 mm Materials: ABS, PC, Pure Copper Speed: 3,300 RPM ±10% Bearing Type: Ceramic Bearing Water Flow: 1.25 L/min Rated Voltage: 12V (LED: 5V) Power Consumption: 5.4 W Radiator: Dimensions: 120 x 277 x 27 mm Material: Aluminum Fans: Dimensions: 120 x 120 x 25 mm Bearing Type: Hydro Bearing Speed: 600 ~ 2,000 RPM ±10% Maximum Noise Level: 29.7 dB(A) ±10% Maximum Air Pressure: 2.01 mmH₂O ±10% Lifespan: 40,000 hours (~4.5 years continuous operation) Connector Type: 4-pin Control Method: PWM LED: Addressable RGB (3-pin 5V) Rated Voltage: 12V DC (LED: 5V) Power Consumption: 3.36 W (LED: 1.8 W) Thermal Paste: Model: ZM STC-10 The Zalman Alpha2 DS A240 offers powerful and visually stunning all-in-one liquid cooling to keep your system running optimally while allowing full customization.

High density single wave copper Barrow radiator Barrow 120mm x 30mm Copper Radiator – Dabel-30A 120

240-mm-Radiator mit 30 mm Dicke in Weiß, bis zu vier 120er-Lüfter in Push/Pull-Betrieb, Finnen aus Kupfer und Kanäle aus Messing, exklusives Design durch Edelstahlapplikationen, kompakte Maße und hochwertige Verarbeitung, 2x G1/4-Anschlüsse

The Alphacool NexXxoS V.2 Radiator series represents the next generation of high-end solid copper radiators. They offer not only a new design (White Special Edition), but also technical highlights such as the patented locking screws, which are flush with the radiator. Uncompromising choice of materials As usual, Alphacool uses pure copper for the NexXxoS V.2 radiators White Special Edition. The end chambers, the water channels and the cooling fins are made of copper and are a unique selling point worldwide. No other manufacturer uses pure copper for all these components. As a result, Alphacool radiators have been among the most popular and best on the market for many years. The perfect foundation for any water cooling sy-stem. Full cooling capacity To maximize the performance of a radiator, Alphacool reaches deep into the trickbox. Copper is the beginning. With a thermal conductivity of 400 W/mK for copper, compared to 236 W/mK for alumini-um, the winner in this comparison is absolutely clear. The fin density is aso specially chosen to work for the user. Alphacool is one of the oldest companies in the field of water cooling and has carried out countless tests in the laboratory. The result is a fin density of 15 FPI. This means that the air flow is only slightly obstructed so that the air can move through without high pressure, however, the cooling capacity does not suffer from this. On the contrary. In order to make optimum use of the air flow, all cooling fins have small flaps on them. Some may know these from motorsport or aircraft design. Flaps are tiny wings that direct the airflow in the desired direction. With radiators, these are barely 1 mm high, but still provide controlled air turbulence to increase cooling performance and minimize flow noise. Patented screw plugs All NexXxoS V.2 radiators rely on the patented stop fittings from Alphacool. Anyone who has mounted a radiator on the front or in the ceiling of a housing knows that protruding screw plugs can ruin the aesthetic as the radiator cannot be placed flush. Alphacool offers a solution with the patented screw plugs. They are fully countersunk in the radiator and sit flush with its surface. This means that nothing stands in the way of clean installation. Of course, the radiators also look much more elegant with the locking screws. Plenty of connection options All versions of the NexXxoS V.2 radiators White Special Edition have two connection options for IN and OUT, one on each side. On the opposite side to the in/outlets the NexXxoS V.2 radiators now also have a fill or vent port. Of course, this connection can also be used to empty the water cooling loop. In any case, ex-perienced users will be pleased. The right size for every application The NexXxoS V.2 radiators of the White Special Edition are available in the sizes 280mm and 360mm, each as an ST30 or XT45 variant. The difference between the two is simply the thickness. ST30 stands for a thickness of 30 mm, XT45 for a thickness of 45 mm. Safety first The NexXxoS V.2, like the previous NexXxoS radiators, offers special protection that prevents screws from penetrating the radiator when attaching fans or when mounting the radiator to the case. Protective plates have been placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and channels underneath. The King is Dead, Long live the King. Those who were happy with the previous NexXxoS radiators will appreciate the many small improvements that the the NexXxoS V.2 radiators offer. Now one of the best radiators has been made even better. Your system deserves them. Technical data L x W x H 316 x 144 x 30 mm Material cooling fins copper Material cooling channels copper Prechamber material copper Material outer housing steel Fins per Inch 15 Threads 5x G1/4“ Thread size fan mounting M3 Fan size 140 mm Fan slots 2 one-sided / 4 double-sided Pressure tested 0,8 bar Max working temperature 180 °C Weight 679 g Colour White

It’s the best system because it’s your system! Only be satisfied with perfection! The new Alphacool NexXxos V.2 radiators will take you to the next level!Increase the performance of your system with the new Alphacool NexXxos V.2 radiators.New and yet provenAlphacool also has been able to combine the best quality with the most beautiful design for the NexXxos V.2 radiators. The end chambers have been manufactured in a noble, modern design. In addition, the NexXxos ST30 V.2 radiators now also have a G1/4“; connection at the opposite end chamber than the inlet/outlet for easy bleeding of the loop. Mount your Alphacool NexXxos radiator in any position, the possibilities are unlimited.Countersunk screw plugs - anything but ordinaryFor the first time Alphacool has created countersunk the screw plugs for the NexXxoS range. This unique, patented design allows you to stay flexible with your Alphacool NexXxos V.2 Radiator. Mount your radiator the way you want it. Thanks to the differently positioned inlets and outlets, you remain individual and unique.Solid copper - the best performance at the highest levelAs always with Alphacool, the new Alphacool NexXxos series is also made of solid copper. Thus, the Alphacool NexXxos radiators offer you the highest thermal conductivity for the best performance. Rely on the No. 1 in materials.Different sizes - same qualityThe new Alphacool NexXxos V.2 is available in many different sizes and thicknesses. Thanks to its special shape, installation is child's play, even with the larger radiators. Decide for yourself which size is perfect for your system and always choose the best quality. ATTENTION: The NexXxoS V.2 radiators are only compatible with connections with a maximum thread length of 5 mm. Technical dataL x W x H275 x 124 x 30 mmQuantity of cooling channels12Net weight553 gMax working temperature180 °CMaterial cooling finscopperMaterial cooling channelscopperPrechamber materialcopperMaterial outer housingsteelFins per Inch15Threads5 x G1/4“Thread size fan mountingM3Fan size120 mmFan slots2 one-sided / 4 double-sidedPressure tested0,8 barWarranty: 10 years???? Warranty Terms

It’s the best system because it’s your system! Only be satisfied with perfection! The new Alphacool NexXxos V.2 radiators will take you to the next level! Increase the performance of your system with the new Alphacool NexXxos V.2 radiators. New and yet proven Alphacool also has been able to combine the best quality with the most beautiful design for the NexXxos V.2 radiators. The end chambers have been manufactured in a noble, modern design. In addition, the NexXxos ST30 V.2 radiators now also have a G1/4“; connection at the opposite end chamber than the inlet/outlet for easy bleeding of the loop. Mount your Alphacool NexXxos radiator in any position, the possibilities are unlimited. Countersunk screw plugs - anything but ordinary For the first time Alphacool has created countersunk the screw plugs for the NexXxoS range. This unique, patented design allows you to stay flexible with your Alphacool NexXxos V.2 Radiator. Mount your radiator the way you want it. Thanks to the differently positioned inlets and outlets, you remain individual and unique. Solid copper - the best performance at the highest level As always with Alphacool, the new Alphacool NexXxos series is also made of solid copper. Thus, the Alphacool NexXxos radiators offer you the highest thermal conductivity for the best performance. Rely on the No. 1 in materials. Different sizes - same quality The new Alphacool NexXxos V.2 is available in many different sizes and thicknesses. Thanks to its special shape, installation is child's play, even with the larger radiators. Decide for yourself which size is perfect for your system and always choose the best quality. ATTENTION: The NexXxoS V.2 radiators are only compatible with connections with a maximum thread length of 5 mm. Technical Details WxDxH 154,5 x 124 x 45,5 mm Net Weight 571g Maximum Working Temperature 180 °C Material (fins/channels/outer shell): Cooper Material (outer shell) Fins per Inch 12 Connections 5x G1/4“ Screw Size M3 Fan size 120 mm Fans 1 per side, 2 total Lüftergewinde M3 Pressure Tested 1,5 Bar Certificates CE, FC, ROHS Scope of Delivery Alphacool NexXxoS XT45 Full Copper 120mm radiator V.2 Mounting material Datasheet Manual