Toote kirjeldus inglise keeles:To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a black nickel plated, straight 1/8 inch OD to G1 / 4 inch female adapter designed specifically for the output of an Eheim 1046 pump. Before screwing in the adapter, the sealing ring should be coated with a lubricant, as otherwise it could be pulled out of its groove and exerts too much pressure on the plastic ring of the pump in the upper area. Alternatively, it is sufficient not to fully screw the adapter, but only up to the rubber itself. Technical Details:Material: brass, black nickel platedConnections: Male Thread: 1/8 inch Female Thread: G1 / 4 inchesFor: outlet Eheim pump 1046
The nickel-plated adapter from Bitspower in the color shiny silver, has a 90 degree angle and is rotatable. One side is intended for mounting hard tubes with an outside diameter of 12mm and the other side has a G1/4" external thread for mounting on radiators and Co. The two rubber rings seal the sides. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Silver Angle: 90° Thread: G1/4 inch Connection: 1x Ø 12 mm
The adapter in white from Bitspower has a G1/4" external thread and a G1/4" internal thread. It has a 90 degree angle and can be rotated on the thread for easier tube alignment. Technical Data: Material: Brass Colour: White Angle: 90 ° Thread: G1/4" and inner G1/4" Thread Length : 5 mm
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This 45 degree angled G1 / 4 "fitting for hoses with 13mm inner diameter does not use a union nut, which is why any tube thickness and thus outer diameter can be used. The blood red connection can be turned on the side of the screw thread. This greatly facilitates installation and allows for precise alignment. Note: For a better and safer fit, we recommend using a cable tie or a hose clamp. Furthermore, the rotation function of the connections should always be used in the disassembled state, as this is relatively difficult to move due to the design. When installed, do not apply force to connections to avoid damaging the connectors themselves and the radiators on them. Technical details:Material: brassColor whiteConnections: Thread: G1 / 4 inch hose: 13 mm (inside diameter)
Besonders flacher Radiator aus Kupfer, Mattschwarzer Radiator von XSPC, 360-Millimeter-Format, Platz für je drei 120-mm-Lüfter pro Seite, 4x G1/4-Zoll-Gewinde, flexibles Crossflow-Design
The Arctic thermal pads are ideal for efficiently exchanging heat between different components. Thanks to the high quality of workmanship and excellent thermal conductivity, the pads are used in many places on computers and electronic components. The thermal pad, which is based on silicone and a special filler, far outperforms generic and performance-oriented pads. In a test by PC Games Hardware (11/2018), the "excellent processability and reusability in every respect" was praised. In combination with the fair price and good performance, our thermal pad was recommended as a "price-performance tip". Thanks to its low hardness and good compression properties, the thermal pad acts as a perfect gap filler and easily bridges uneven surfaces and air gaps. The ARCTIC Thermal Pads are non-adhesive and can therefore be placed precisely. Installation is child's play and therefore perfect for beginners. The pad contains no metal particles, is electrically insulating and not capacitive. Handling is therefore safe since contact with electrical parts does not lead to damage. Technical specifications: Dimensions 290 x 290 mm Contents 1 piece Thickness 0.5 mm Thermal conductivity 6.0 W / mK Hardness 25 shore 00 Relative density 3.2 g / cm³ colour blue Operating temperature -40 ~ 200 ℃ Volume resistance 1 X 1012 Ω-cm Interruption voltage 12 KV / mm Draw resistance 2.5 Kgf / cm² Elongation 45% Dielectric constant 14.1816 ε at 60 Hz 13.0264 ε at 1K Hz 13.0264 ε at 1M Hz Flammability V-0
With the two matt black holders from Bitspower it is possible to install the complete series of D5 pump, D5 top and Z tube reservoir in the case. The mounting kit is compatible with the D5-Top and the 2D5-Top and can therefore be used as an extension or replacement. Technical Data: Colour: Matt Black Compatibility: D5-TOP, 2D5-TOP
Stylish CPU cooler from Akasa, 120mm PWM RGB fan, digitally addressable RGB LED lighting, black anodized aluminum, for Intel socket 115xhttps://akasa.co.uk/search.php?seed=AK-CC7139HP01
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:This fitting can be used to connect a 16/10 hose with a 1/4“ thread. The fitting is angled at 90° and is revolvable, making it ideal for easy hose routing in the system. Technical specifications: Material: Brass, chromatizedColour: Deep Black Dimensions:Length: 39mmWidth: 16x22mmHeight: 32mm Hose size compatibility : 16/10mm Extent of delivery:1 x Alphacool HF Screw connector 90° G1/4 outer thread on 16/10 revolvable - Deep Black This product has been reviewed for you:ModdingbaseXtremesystems (Engl.) (userreview)PT-reviews (Pt)
The perfect solution for perfect curves in the Alphacool HardTubes is now available. Simply slide the silicon insert into the plexiglass tube and heat up the desired section. Thanks to the extreme heat resistance of silicon, the tube can be bent without the curved section buckling. After it cools, the silicon insert can simply be pulled out. Available for tubes with 10mm, 12mm, and now 13mm inner diameters, and each size comes in 30cm length for curves in shorter tubes or 100cm length for curves in longer tubes. Technical Details Length: 100cm Thickness: 13mm Colour: blue Scope of Delivery 1x Alphacool silicon bending insert 100cm for ID 1/2” / 13mm HardTubes - blue NoticeDue to the manufacturing process, the diameter can vary by 0.5 - 1mm.
The nickel-plated adapter from Bitspower in matt black has a 90 degree angle and is rotatable. One side is designed for mounting hard tubes with an outside diameter of 12mm and the other side has a G1/4" external thread for mounting on radiators and Co. The two rubber rings seal the sides. Technical Data: Material: Nickel-Plated Brass Colour: Matt Black Angle: 90° Thread: G1/4 inch Connection: 1x Ø 12 mm
LONG SERVICE LIFE The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life. INNOVATIVE DESIGN ENABLES QUIET AND EFFICIENT VENTILATION The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure. Technical Data Performance Fan Speed: 1350 rpm Airflow: 74 CFM/ 126 m³/h Static Pressure: 1.6 mm H₂O Noise Level: 0.5 Sone Operating Ambient Temperature: 0 - 40 °C Fan Fan Frame: Standard Control Type: Fixed Speed Connector: 3-Pin-Connector Fan Bearing: Fluid Dynamic Bearing Electric Characteristics: Typical Voltage: 12 V DC Starting Voltage: 6 V Current/ Voltage: 0.20 A / 12 V Cable Lenght: 400 mm Size & Weight Lenght: 140 mm Width: 140 mm Height: 27 mm Weight: 180 g
The connection for 16mm (AD) Hard Tubes from EK Water Blocks, is a compression fitting made of nickel-plated brass. It is silver in colour and comes from the Torque series, which convinces with a simple and timeless design. Originally intended for the EKWB Quantum series, this fitting is also compatible with other EK products. In this fitting, the union nut serves as a compression ring, which presses the sealing ring onto the hard tube. It thus offers a higher level of safety and sealing than, for example, the fittings of the EK-HD series. As a small feature, the union nut has a recess under which coloured rings are placed, which provide a bit of individuality and are available separately. Technical Data: Material: Nickel-Plated Brass Colour: Silver Supported Tube: 16 mm OD Thread: G1/4", male Thread Length: 4,5 mm Outer Diameter (Fitting): 24 mm Installed Height: 15 mm Compatible Solid Tubing: Acrylic, PETG, Copper, Brass, Stainless Steel
EK Water Blocks EK-Torque STC-16/12 color ring pack of 10, purple. These exchangeable rings for the 16 / 12mm Soft-Tube compression fittings from EKWB are made of aluminum, are available in different colors and give your system a unique look. Compatibility: EK-Quantum Torque STC-16/12 connections Technical specifications: Color Purple Material: aluminum Quantity: 10 pieces
This is the 2nd generation Vector GPU water block from the EK® Quantum Line, designed for ASUS® TUF RTX 3070 graphics cards based on the latest NVIDIA® Ampere™ architecture. EK-Quantum Vector TUF 3070 D-RGB water block is compatible with ASUS TUF Gaming RTX 3070 graphics cards.The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with the power stages and inductors of the VRM. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. Additionally, this new design allows the terminal to be screwed directly onto the copper cold plate of the GPU block, making it more rigid and reducing the chances of damaging the water block. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of nickel-plated electrolytic copper, while its top is CNC-machined out of glass-like cast Acrylic. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Vector TUF RTX 3070 D-RGB water blockThe aesthetic end-piece is housing the addressable D-RGB LED strip. This water block boasts a total of 8 individually addressable RGB LEDs, and it is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the EK-Quantum Vector TUF RTX 3070 D-RGB water blockEK recommends the purchase of a retention backplate. The backplate improves the overall aesthetics of your graphics cards and also provides additional passive cooling for the GPU core, VRAM, and backside of the printed circuit board VRM section. Technical Specification Dimensions: (LxHxW) - 255x149x20.5mm D-RGB cable length: 500mm D-RGB LED count: 8 D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) Enclosed EK-Quantum Vector TUF RTX 3070 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
Whether used as a replacement or to modify the tube, the Protium reservoir can be used with all Protium items. Technical Data Length: 100 mm Outer diameter: 60 mm Material: Acrylic Compatibility Protium D5 pump attachment Protium D5/Reservoir Combo Protium reservoir
Optimierte Leistung trifft modernes, schwarzes Design und flüsterleisen Betrieb. Der Single-Tower CPU-Kühler ermöglicht mit seinen vier versetzen Heatpipes eine schnelle Wärmeübertragung in den Kühlkörper, wo diese mittels eines 120 mm Lüfter effizient abgeführt werden kann. ULTIMATE PERFORMANCE WÄRMELEITPASTE Der Freezer i35 wird mit einer 0,8 g Spritze der neuen MX-5 ausgeliefert. ARCTICs Ultimate Performance Wärmeleitpaste ermöglicht aufgrund ihrer geringen Viskosität und Partikelgröße eine besonders dünne Schichtdicke und verringert den Wärmestau zwischen Heatspreader der CPU und Kühler erheblich. FÜR KÜHLKÖRPER OPTIMIERTER LÜFTER Der beim Freezer i35 verbaute Lüfter, profitiert von allen Vorzügen der P-Lüfter. Diese vereinen, mit ihrem vibrationsarmen, stromsparenden Motor und dem hydrodynamischen Gleitlager, einen leisen, sowie effizienten Betrieb. Trotz hoher Finnendichte garantiert der Lüfter mit seinem fokussierten Luftstrom einen hohen statischen Druck und ist damit ideal für den Einsatz auf Radiatoren und Kühlkörpern geeignet. Die Drehzahl des Lüfters lässt sich dynamisch über PWM steuern und kann somit optimal an jedes Szenario angepasst werden. Technische Daten: Intel Sockel: 1700, 1200, 115X Heatpipes: 4 Finnenmaterial: Aluminium Finnenanzahl: 54 Finnendicke: 0,4 mm Wärmeleitpaste: MX-5 (0.8g) Lüftergröße: 120 Geschwindigkeit: 200 - 1800 rpm Lüfterlager: Fluid Dynamic Bearing Geräuschpegel: 0.35 Sone Stromstärke: 0.12 A Anschluss: 4-Pin Tiefe: 91 mm Breite: 133 mm Höhe: 158.5 mm Gewicht: 734 g
AMD Tower CPU Cooler for Continuous Operation. 200 - 1800 rpm Lüfterlager: Double Ball Bearing Geräuschpegel: 0.35 Sone Stromstärke: 0.12 A Anschluss: 4-Pin Größe & Gewicht Tiefe: 91 mm Breite: 133 mm Höhe: 158.5 mm Gewicht:734 g
The Alphacool Eisbaer Pro Aurora offers a much larger cooling surface than the normal Eisbaer Aurora. It was specially developed for extremely large CPU DIEs and fully covers processors such as the AMD Threadripper but also the AMD Ryzen CPUs. The Eisbaer Pro has also been designed for the Intel Socket 3647 to ensure the best possible cooling performance of the entire CPU. The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market. Large cooling surface The cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. With the included AM4 bracket, cooling an AMD Ryzen processor is also child's play. The cooling fins are 0.4mm thick and also have an optimal distance of 0.4mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3mm thick, which allows the heat to reach the water and be dissipated as quickly as possible. Pump The Eisbaer Pro Aurora cooler uses the very compact and small DC-LT 2 pump. It offers enough power to integrate other components such as a GPU water cooler or radiator into the water circuit. Lighting The entire Eisbaer Pro Aurora cooler is equipped with addressable, digital RGB LEDs. This makes it a real eye-catcher in the case. Of course, all digital RGB LEDs can be controlled as desired. Depending on the controller, almost all effects are possible. Usable fittings Connections that are too large mean that the fill port can no longer be used. We recommend the following: - up to and including 13/10 without restriction - 16/10 only in angled version - Connections larger than 16/10 should not be used Compatibility: Intel: 1700 / 2011 / 2011-3 / 2066 / 3647 Narrow & Square / LGA 4189 AMD: AM4 / TR4 / sTRX4 / SP3 / sWRX8 / AM5 Technical data cooler with pump L x W x H 64 x 79 x 54,3mm Material cooler bottom nickel plated copper Material cooler top acrylic Threads 2x G1/4“ (+ 1x Fillport G1/4“) Pump type DC-LT2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow 75 L/h Voltage 12V DC Power consumption 4W Pressure tested 0,8 Bar Maximum working temperature 60°C Number of LEDs 10x Digital aRGB LEDs
