ASUS Prime MR120 Fan ARGB Reverse Black 3in1. Tüüp: Ventilaator, Ventilaatori läbimõõt: 12 cm, Pöörlemiskiirus (max): 1600 RPM, Maksimaalne õhusurve: 1,38 mmH2O, Laagri tüüp: Liulaager. Toote värv: Must
Thermal Grizzly introduces the Thermal Putties, a new product line specifically developed for modifying graphics cards and replacing thermal pads between PCBs and heatsinks. However, the Thermal Putties can also be used by hobbyists and experienced technicians for a variety of devices such as notebooks, handhelds, and gaming consoles. Flexible replacement for thermal pads with a wide range of applications Especially suitable for heatsinks with varying distances to critical components Advance version with high thermal conductivity for more powerful components Safe to use thanks to its electrically insulating property The flexible alternative to thermal pads: The Thermal Grizzly Putty Advance Thermal Grizzly Putty is a non-electrically-conductive alternative to conventional thermal pads. As an easy-to-apply and flexible gap filler, it compensates for height differences and is therefore ideal as a replacement for thermal pads on graphics cards and other devices. Typically, several types of thermal pads with varying heights are used from the factory, so when replacing the pads or converting the cooler to a GPU water cooler, several different pads are needed. This problem is solved by the flexible applicability of Thermal Grizzly Putty. How much Thermal Grizzly Putty do I need? For modifying a single, smaller graphics card without a backplate (e.g., GeForce GTX 1060), about a 30-gram jar of Thermal Grizzly Putty is needed. For a larger graphics card such as a GeForce RTX 4090, usually a 30-gram jar is sufficient for the memory (VRAM) and voltage regulators (VRM) on the front side. On the back, between the PCB and the backplate, larger graphics cards often have a consistent, larger gap between the two surfaces. Here, about two 30-gram jars or one 100-gram jar are needed if you want to completely fill this gap. Three variants for different applications The manufacturer offers three different variants for every performance class. The Basic variant is suitable for efficient components that generate low heat. The Advance variant, on the other hand, is aimed at the midrange segment with more powerful components thanks to its higher thermal conductivity. For the high-end segment, Thermal Grizzly offers Putty Pro, which ensures optimal cooling for your high-end components thanks to its particularly high thermal conductivity. Flexible and safe use Before application, the target surface should be thoroughly cleaned and degreased, for example with cleaning wipes from Thermal Grizzly or common isopropanol. Thanks to its electrically insulating property, it can be applied over large areas with the supplied spatula. Alternatively, the Thermal Putty can be formed by hand into small pellets that can be adapted in size to the surface to be applied (e.g., VRAM, SMD).
Essential SimplicityRefined from its predecessor, GF120R V2 now comes integrated into our flagship cases and more. Its well-engineered performance with newly designed one-piece seamless frame that blends effortlessly with modern PC aesthetics. Compared to the standard GF120 V2 with regular fan blades, the GF120R V2 features a reverse-blade design, offering greater flexibility for intake and exhaust configurations while maintaining a seamless and consistent visual appearance.Full ARGB Lighting EffectVibrant ARGB illumination spans the entire fan blade surface, creating a dynamic lighting experience that enhances any build with fully customizable colors and effects.Optimized AirflowBuilding on the strengths of its predecessor, GF120 V2 delivers up to 10% more maximum airflow.Minimalist AestheticsThe one-piece bracket design brings polished subtle sophistication and blends in perfectly as a replacement or performance upgrade.Long-lasting ReliabilityBuilt with hydraulic bearings (HDB), GF120 V2 ensures smooth, quiet operation through a large oil reservoir and loop-type lubrication system. Designed for longevity consistency.Flexible Options, Your WayChoose between a single fan or a convenient 3-in-1 pack, tailored to your build needs.
Stable LCP rotor blades, low vibration, hybrid bearing for quiet, long-lasting operation, RGB lighting with 16 LEDs, high airflow, ideal for radiators, PWM & 5V RGB connection available The NZXT F140X is a 140mm RGB case fan for those who value strong cooling performance, quiet operation, and premium design. Ideal for air and water cooling setups in gaming PCs. Durable LCP blades prevent deformation at high speeds and minimize vibrations Magnetically stabilized hybrid bearing reduces friction for quiet, long-lasting operation High cooling performance with up to 116 CFM airflow – perfect for radiators and cases 16 RGB LEDs provide subtle, even lighting controllable via CAM or motherboard PWM and 5V RGB connectors allow easy integration into any modern system Cooling performance for enthusiasts With up to 2400 RPM, the F140X achieves an airflow of 116 CFM – approximately 197 m³/h. Within the 30 dBA range, performance is still a strong 81 CFM (≈138 m³/h), ideal for quiet builds with high efficiency. Durable bearing & sturdy construction Thanks to magnetic bearing centering and fluid dynamic lubrication, the hybrid bearing offers a lifespan of up to 60,000 hours. The reinforced metal core also protects the motor under continuous heavy load. Elegant design with smart control The RGB lighting with 16 LEDs adds subtle accents, while aluminum details provide a premium look. Fan speed and lighting can be flexibly adjusted via NZXT CAM or a compatible motherboard.
LCP rotor blades for strong cooling performance, hybrid bearing for quiet continuous operation, RGB lighting, CAM control, high airflow, ideal for radiators, 4-pin PWM & 5V RGB connector The NZXT F240X is a powerful 240mm case fan designed for ambitious builds. It offers an optimal combination of cooling performance, quiet operation, and stylish RGB lighting – perfect for gamers and PC enthusiasts. LCP blades remain dimensionally stable even at high speeds – for consistent airflow without vibration Hybrid sleeve and magnetic bearing reduces friction and ensures long life with quiet operation Up to 116 CFM airflow with high static pressure – ideal for tight builds or radiators RGB lighting with 16 LEDs for subtle accents – controllable via NZXT CAM or motherboard Convenient PWM and RGB connectors allow flexible integration into modern setups Powerful performance for compact builds With a maximum speed of 2400 RPM, the F240X achieves an impressive airflow of 116 CFM – equivalent to about 197 m³/h. This keeps your system cool even under load, whether gaming or working intensively. Quiet and efficient thanks to hybrid bearing The specially developed bearing combines magnetic stabilization with fluid dynamic lubrication. This not only reduces noise but also minimises wear – for a lifespan of up to 60,000 hours. Elegant design & easy control Aluminium accents and 16 integrated RGB LEDs provide a subtle, high-quality look. Control is conveniently handled via NZXT’s CAM software or a compatible motherboard – all without cable clutter thanks to a thoughtful frame layout.
LCP rotor blades, strong cooling performance, hybrid bearing for quiet operation, RGB lighting, stable and durable metal core design, digital control possible via NZXT CAM The NZXT F280X is a powerful 280 mm case fan designed for demanding builds. With high-quality materials and ingenious design, it targets gamers and PC enthusiasts who seek to combine strong performance with quiet cooling and modern aesthetics. Durable LCP rotor blades prevent vibration and ensure consistently strong airflow Hybrid bearing with magnetic stabilization reduces friction and extends lifespan Optimized blade design minimizes air turbulence for maximum efficiency Metal-reinforced hub ensures stable, smooth operation at high speeds RGB lighting and CAM control offer personalized customization options Performance meets precision With up to 2400 RPM, the F280X delivers an impressive airflow of 116 CFM at high static pressure—ideal for dense radiators or tight case configurations. At the same time, noise levels remain pleasantly low due to the clever bearing system. Robust materials & thoughtful design The rotor and housing are made from high-strength liquid crystal polymer (LCP), which remains dimensionally stable even at high speeds. A small blade tip clearance reduces air loss and improves efficiency. The result: more cooling power with less noise. Aesthetics & control in harmony The clean design with aluminum accents and subtle RGB lighting blends seamlessly into modern builds. The fan can be conveniently configured via NZXT CAM software or compatible motherboards—from speed profiles to individual lighting effects.
Der Mugen 6 Dual Fan White ARGB Edition zeichnet sich durch einen stark überarbeiteten Kühlkörper aus. Außerdem wird er mit zwei Scythe Wonder Tornado 120-mm-ARGB-Lüfter ausgeliefert. Der Kühlkörper bietet eine um 45 % erhöhte Lamellenanzahl, behält aber gleichzeitig eine Höhe von nur 154 mm bei. Durch diese Anordnung mit höherer Lamellendichte wird eine verbesserte Wärmelableitung erreicht. Der asymmetrische Aufbau gewährleistet hohe Kompatibilität mit den meisten Gehäusen und Mainboards. Die Wonder Tornado Lüfter sind mit einen 9-Blatt-Vortex-Design und dem zuverlässigen Sealed Precision Fluid Dynamic Bearing ausgestattet. Das einfach zu installierende H.P.M.S. V Montagesystem bietet optimalen Anpressdruck und Kompatibilität mit den neuesten CPU-Sockeln, einschließlich Intels LGA 1851 und AMDs AM5.
The ASUS LC 360 ARGB combines powerful CPU cooling with quiet operation and impressive ARGB lighting. This 360 mm all-in-one liquid cooler features a high-quality copper water block, a high-performance pump with up to 3,000 rpm, and three powerful ARGB fans. It offers a balanced combination of high cooling performance, efficient heat dissipation, and an attractive look. Thermal paste is already applied, making installation easier and ensuring an optimal contact surface between the CPU and the cold plate. The pre-installed ASUS fans deliver a strong airflow of up to 74.31 CFM and provide high static pressure for efficient heat removal. With a maximum noise level of only 33 dB(A), operation remains pleasantly quiet. The integrated ARGB lighting provides a striking, modern appearance. A circumferential light guide on the water block emphasizes the design and gives the system a futuristic look. The interchangeable cover also allows for quick, tool-free customization.TypeAll-in-one liquid coolerColorblackEAN4711636611893Manufacturer No.90RC01X1-B0EAY0CategoryWater cooling setUseCPUCompatible sockets1700, 1851, AM4, AM5Noise level33 dBFeaturesLED lightingLED lightingYes, addressable RGB headerLED lighting colorRGBFan speed800 to 1,800 rpmHeat sink materialAluminum, copperAirflow74.31 cfmAir pressureUp to 2.2 mm/H2ORadiator size3x 120 mmPump speeds3,000 rpmSystemClosed systemPower connection4-pin PWMAdditional informationHose length: 400 mmAccessories includedScrews and bracketsFan dimensions (Fan 1)Quantity: 3 pcs, width: 120 mm, height: 120 mm, depth: 25 mmHeat sink dimensionsWidth: 394 mm x height: 120 mm x depth: 27 mmOverall dimensionsWidth: 394 mm x height: 120 mm x depth: 52 mm
EX2-755 is an ambient liquid cooling system with several control options. This model contains a dual x 120mm fan aluminum radiator, providing roughly 590W of cooling with a 25°C ambient delta. Just add tubing, fittings, coolant, and connect to your cold plate(s).- Cooling capacity: 590W (2013BTU/hr) with 25°C liquid-ambient delta @ 4LPM- Radiator fan speed: automatic based on temperature, or 10 manual levels- Pump: 10 manual speed levels, up to 4LPM (1GPM)- Adjust audio alarm based on 3 included temperature sensors- Relay trigger can be configured as NO or NC and adjusted based on temperature- Power input: 12VDC (via computer Molex plug), or 110/220VAC with separate adapter- Reservoir capacity: 157ml (5.3 fl oz)- G 1/4 BSPP threads on back for fittingsVentilaatorJahRadiaatorJahJahutusvedeliku maht0,157 lVentilaatorite arv2 ventilaator(id)Kogus1Pumba pinge12Radiaatori materjalAlumiiniumToote värvMustKaal3,63 kgVentilaatori läbimõõt12 cm
Warranty: 24 month(s) Producer product name: XFAN 120 Fan diameter: 12 cm Rated current: 0.07 A Airflow: 44.71CFM Power requirements: 12V DC Bearing technology: Hydro Noise level (high speed): 26 dB Suitable for: Computer case Power consumption (typical): 0.84 W Rotational speed: 1300 RPM Gross weight: 0.2 kg Type: Fan Weight: 180 g Net weight: 0.16 kg Colour of product: Black Other features: 3 Pin /2 Pin conection 12V High quality black material fan structure.Low speed RPM to ensure quiet operation.Computer case cooling.Power supply cooling. Dimensions (WxDxH): 120X120X25mm mm Fan: 1300±10%RPM 44.71CFM 26dB(A) Height: 120X120X25mm mm Depth: 120X120X25mm mm Width: 120X120X25mm mm Gross depth (mm): 220 mm Gross width (mm): 160 mm Gross height (mm): 30 mm Packing quantity: 64 pc(s) Gross depth master carton: 410 mm Gross width master carton: 400 mm Gross height master carton: 352 mm Net weight master carton: 10.24 kg Tare weight master carton: 3.56 kg Volume (m3): 0.001056 m³ Tare weight (kg): 0.04 kg
The stylish ball valve of Bitspower in the colour shiny silver, allows the stopping of the cooling circuit and is ideal for systems where regular modifications are made. At both ends the ball valve has two G1/4" female threads, for two suitable connections. The material is nickel-plated brass. Technical Data: Material: Nickel-Plated Brass Main Color: Shiny Silver Handle Color: Black Thread: Inner G1/4" x2
Tootekood: BP-DDCTOPUK150P-BKRDGTIN: 4719552211418Jahutid ja lisad
Laing DDC are among the elite of PC water pumps and are the reference for their high pressure, especially for high-flow systems. The only drawback are the non-standard connectors of Laing, which is why many manufacturers Wakü alternative covers with G1 / 4-inch -Windings offer. The connection specialist Bitspower also offers a simply elegant lid made of the heat-resistant special plastic Acetal or POM. For exactly this cover, the upgrade kit described in this article is intended. This includes a reservoir as well as a lid and floor element made of red but transparent acrylic. The reservoir has a height of 150 mm. Technical details:Material: AcrylHeight: 150 mlThread: 2x G1 / 4 inchesCompatibility: Bitspower DDC Top
Der laufruhige 120mm RGB LED-Lüfter von Argus bietet mit seinen insgesamt 8 innenliegend RGB-LEDs einen stylischen Effekt. Gummierte Auflagen in den Lüfterecken, auf beiden Seiten des Lüfters, sorgen für einen vibrationsfreien Betrieb und lassen die Option offen, ob der Lüfter kühle Luft ansaugen oder die warme Luft aus dem Gehäuse pusten soll. Der Anschluss erfolgt temperaturgeregelt über den 4pin PWM-Anschluss am Mainboard und wird zusätzlich noch am 3pin 5V RGB-Header des Mainboards angeschlossen, welcher für die synchronen Farbwechsel aller angeschlossenen Komponenten zuständig ist.
Mõõtmed: 93 x 126 x 78 mm (L x K x S) Kaal: umbes 450 g Materjal: vask, alumiinium, plastik Värvus: must, hõbe, vask, piimvalge TDP: 130 W Fänn: Arv: 1x 92 mm Kiirus: 900 - 2300 p / min Õhu läbilaskevõime: max. 61,1 m³ / h Helitugevus: 20 - 30,5 dB (A) Ühendus: 4-kontaktiline PWM Tööpinge: 12 V Soojustorud: 4x 6 mm Ühilduvus: Inteli pesa: 775, 1150, 1151, 1155, 1156 AMD-pesa: AM2, AM2 +, AM3, AM3 +, AM4, FM1, FM2, FM2 +
All-in-one liquid CPU cooler, 80.95 CFM, 2 slot ROG 120mm ARGB fan, Aura Sync RGB, LGA1700/1200 support Seventh Gen Asetek pump delivers exceptional cooling and minimal noise with an operating range starting at 840 rpm.ROG-designed addressable RGB radiator fan for optimized airflow and static pressure 81 CFMReinforced, sleeved tubing for increased durabilityIndividually addressable A-RGB and NCVM coating pump cover accentuates the sleek, modern aesthetics Styled to complement ROG motherboards, at the center stage of your buildIntel® LGA 1700, 1200, 1150, 1151, 1152, 1155, 1156, 2011, 2011-3, 2066 and AMD AM4/AM5/TR4 support
All-in-one water cooling in black, 360 mm radiator, three EK-Vardar 120 D-RGB, stylish design and quiet operation, compatible with AMD and Intel sockets (including LGA 1700)
With its 360 mm radiator, the S90 RGB is a compact all-in-one water-cooling system that provides efficient cooling for all CPUs. Apart from providing visual highlights in 16.7 million colors, the addressable RGB PWM fans also ensure good cooling performance with a speed of up to 2,000 rpm. Installation is easy, thanks to the flexible, textile-braided tubing and the supplied mounting brackets.Full Fan Control The three RGB PWM fans that belong to the S90 RGB's 360 mm radiator not only have fully addressable RGB illumination, but their speed can also be controlled within a range from 600 rpm to 2,000 rpm. And for easy cable management, the fans can be daisy chained. Also the pump has PWM control for optimal performance and low noise volume.Best Possible Heat Dissipation Like the fans, the water block and pump unit is also equipped with RGB illumination and presents itself with a chic infinity mirror effect. The copper plate and the supplied high-quality DOWSIL™ thermal paste ensure the best possible heat dissipation.Compatible with All CPUs Thanks to the two enclosed mounting brackets for CPUs of all manufacturers, this all-in-one water-cooling solution is optimally prepared for direct use in the PC case.Flexible and Easy to Install Via the flexible tubing, installation in the PC case is as uncomplicated as possible. The tubing is textile braided for optimal protection against scratches.Rotatable Sharkoon Logo In order to ensure that the Sharkoon logo is always horizontal, it can be easily rotated to the desired position on the water block and pump unit. General CPU Socket Compatibility: Intel® Socket LGA 115X / 1366 / 1200 / 1700 / 2011 / 2011-3 / 2066 (Core i3 / i5 / i7 / i9 ) AMD® TR4 / TRX4 / AM5 / AM4 / AM2 / FM2 / FM1 / AM3+ / AM2+ / AM2 Weight: 1.86 kg Water Block & Pump Dimensions: Ø 71.5 mm x 52.3 mm Weight: 1.07 kg Cold Plate Material: Copper Pump Speed: 1,600 ~ 3,200 rpm ± 6 % Rated Voltage (Pump): 12 V Rated Voltage (LEDs): 5 V Rated Current (Pump): 0.35 A Rated Current (LEDs): 0.8 A Rated Power (Pump): 4.2 W Rated Power (LEDs): 4.0 W Pump Connector: 4-Pin PWM LED Connector: 4-Pin (5V-D-coded-G) Radiator Type: Brazed Radiator Dimensions (L x W x H): 392 x 121 x 27.5 mm Material: Aluminium Alloy Tubing Length: 400 mm Fans Number of Fans: 3 Dimensions (L x W x H): 120 x 120 x 25 mm Fan Speed: 600 ~ 2,000 rpm ± 10 % Max. Airflow: 131.93 m³/h Max. Air Pressure: 2.90 mmH₂O Max. Noise Level: 35 dB(A) Illumination: 12x Addressable RGB LED Rated Voltage (Fan): 12 V Rated Voltage (LEDs): 5 V Rated Current (Fan): 0.21 A Rated Current (LEDs): 0.54 A Rated Power (Fan): 2.52 W Rated Power (LEDs): 2.7 W Fan Connector: 4-Pin PWM LED Connector: 4-Pin (5V-D-coded-G) Fan Cable Length: 450 mm LED Cable Length: 450 mm Package Contents S90 RGB White AMD® Mounting Bracket Intel® Mounting Bracket Metal Backplate Mounting Screws Thermal Paste (DOWSIL™ TC-5888) Manual
Leistungsstarker CPU-Kühler, asymmetrisches Tower-Design, sechs 6-mm-Heatpipes, 1x leiser JetStream-Lüfter mit PWM-Anschluss, hohe Kompatibilität zu Sockeln und RAM, 220 Watt TDP
The Thermaltake TOUGHLIQUID 240 ARGB Sync All-In-One Liquid Cooler is an all-in-one liquid cooler equipped with TOUGHFAN 12, an integrated controller, and a rotating cap with 6 LEDs that can be controlled via 5-V RGB-compatible motherboards. The rotating cap of the TOUGHLIQUID 240 ARGB can also be easily rotated after installation so that the TT logo faces the correct direction. The high-gloss polished water block is equipped with a built-in controller that enables easy control of the water block's lighting mode, speed, and color, while allowing effortless cable management and direct access to the lighting effects. Equipped with two TOUGHFAN 12 fans, the TOUGHLIQUID 240 ARGB Sync now offers a fan speed of up to 2000 RPM, ensuring the best cooling performance. The high-performance copper base plate increases thermal conductivity. The high-quality and reliable pump enables maximum water circulation and keeps the copper plate continuously cool. The low-evaporation tubing effectively reduces coolant loss. Therefore, no refilling is required.
SWAFAN EX14 ARGB brings magnetic force design to ARGB fans while keeping the iconic swappable fan blade design. Daisy-chaining up to 3 fans per cable improves fan connection efficiency and convenience while enhancing cable management for PC building.
Mit bis zu 2.000 Umdrehungen pro Minute und einem Volumenstrom von 132 m³/h sind die Rebel F50 PWM Lüfter ganz auf die Kühlung leistungsfähiger Hardware ausgelegt. Dabei überschreitet ihre Lautstärke dank gummierten Auflagepunkten und einem hydrodynamischen Gleitlager auch bei Höchstleistungen nie moderate 35 Dezibel. Optisch abrunden lassen sich die Lüfter durch die individuell einstellbare Beleuchtung von zwölf adressierbaren RGB-LEDs.
Mit bis zu 2.000 Umdrehungen pro Minute und einem Volumenstrom von 132 m³/h sind die Rebel F50 PWM Lüfter ganz auf die Kühlung leistungsfähiger Hardware ausgelegt. Dabei überschreitet ihre Lautstärke dank gummierten Auflagepunkten und einem hydrodynamischen Gleitlager auch bei Höchstleistungen nie moderate 35 Dezibel. Optisch abrunden lassen sich die Lüfter durch die individuell einstellbare Beleuchtung von zwölf adressierbaren RGB-LEDs.
