Dreifach drehbarer und um maximal 90 Grad gewinkelter, silbern vernickelter Adapter von Bitspower mit 1x G1/4-Zoll-Innengewinde und 1x G1/4-Zoll-Außengewinde
The adapter in white from Bitspower has a G1/4" external thread and a G1/4" internal thread. It has a 90 degree angle and can be rotated on the thread for easier tube alignment. Technical Data: Material: Brass Colour: White Angle: 90 ° Thread: G1/4" and inner G1/4" Thread Length : 5 mm
The two clamp set is suitable for the equalizing tanks of the Z-series from Bitspower. They make it possible to mount the expansion tank individually inside or outside the case, also with the corresponding pump. The set contains two clamps each with four screws and nuts. The holders have an 80mm, 5mm high and 15mm deep base. The clamps themselves are 10mm wide, have an inside diameter of 60mm and an outside diameter of 66mm. Technical Data: Dimensions: 80 x 70 x 15 mm (W x H x D) Inner Diameter Clamps: 60 mm Outer Diameter Clamps: 66mm Material: Plastic Color: Black Compatibility: Bitspower water tanks of the Z-series
The adapter for 16mm (AD) Hard Tubes in matt black from Bitspower is especially designed for the connection of two graphics cards with SLI/ Crossfire to bridge the short distance. If two graphics cards are used, two of the adapters are also required. They are sealed with two rubber rings. The adapter is especially well compatible with Bitspower's Crystal Link Tube series. Technical Data: Material: Nickel-Plated Brass Colour: Matt Black Connection: 16 mm (OD) Thread: G1/4" Thread Length: 5 mm
Toote kirjeldus inglise keeles:Dual panel-mounted socket threads for "internal/external" fittings on a computer chassis L-bracket. The female G 1/4 BSPP threaded couplings can be removed from the L-bracket and used as panel-mountable unions. Nickel-plated brass. This product may need to be temporarily disassembled during installation.
Alphacool's Eiszapfen series is future-oriented and characterized by excellent workmanship and high flow. Ball valves have always been a flow brake, making life difficult for each pump. Then, Alphacool has developed a ball valve represents no obstacle to a diameter of 10mm. The inside scoop closes absolutely tight, thus preventing further escape of liquid. On both sides all 1/4“ connections with a maximum thread length of 6mm can be screwed. This ball valve is available in two different color versions: Chrome and Deep Black. Technical Details: Dimensions (LxBxW): 35,4 x 36 x 22,7mm Color: Chrome Scope of delivery: Alphacool Eiszapfen 2-way ball valve G1 / 4 - Chrome
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®.(Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316, Dremel® - Art.No: 32196 and 32229) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 16/11mm 90° 10/30cm WARNING:Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note:Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention:This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
EK Quantum Flow Indicator D-RGB is a high-quality flow indicator with addressable RGB lighting, which belongs to the Quantum Line. It visually represents the coolant flow rate, which is often difficult to see with the naked eye. This can be very useful to immediately see if your loop is in perfect condition or if there are problems with the pump or flow. In addition, this is a very elegant cast acrylic part covered by a nickel-plated aluminium cover. It has three G1/4" connectors, all of which are female. It can be mounted in the middle of a tube with two fittings or attached to a radiator or pump at each G1/4" connection. Each of the threads, can be used either as an inlet or outlet. This product is compatible with the common RGB synchronisation technologies of all major motherboard manufacturers. The nickel-plated aluminium cover hides the LED hotspots and provides uniform illumination. Enclosed: EK-Quantum Flow Indicator D-RGB – Nickel 1x G1/4" nickel-plated brass plug
The nickel-plated adapter from Bitspower in the color shiny black, has an angle of up to 90 degrees, a G1/4" internal thread and a G1/4" external thread. The special feature of this adapter are the three swivel joints, so that the alignment of e.g. tubes becomes even easier and more flexible. Technical Data: Material: Nickel-Plated Brass Main Color: Shiny Black Angle: up to 90° Thread: 1x G1/4", 1x Inner G1/4" Thread Length: 5 mm
RGBpx LED ring for aqualis 100/150, 10 addressable LEDsThe RGBpx-compatible LED ring for aqualis 100 and aqualis 150 expansion tanks with a total of 10 individually addressable LEDs. The LEDs are mounted in a black rubber ring which is slid onto the glass tubes of the aqualis 100 and aqualis 150 expansion tank series.To operate the LED strip, an appropriate control unit with RGBpx output is required (not included in delivery). At the end of the strip there is an additional connector to connect another RGBpx component.Technical data: Inner diameter 50 mm Dimensions approx. 60 x 62 x 10 mm 10 individually controllable LEDs Scope of delivery: RGBpx LED ring one RGBpx connection cable, length 50 cm Compatible to: D5 NEXT QUADRO fan controller
StarTech.com HEATGREASE20. Toote värv: Valge. Laius: 72 mm, Sügavus: 18 mm, Kõrgus: 18 mm. Pakendi laius: 150 mm, Pakendi sügavus: 85 mm, Pakendi kõrgus: 22 mm
Toote kirjeldus inglise keeles:The Bitspower shut-off valve is the ideal extension for all water cooling systems, where regular modifications are made. Simply turn the stopcock 90 degrees to perform the required work on the watercooling. The module itself is nickel-plated and as usual provided with a discreet Bitspower lettering. The silver-black stopcock has two G1 / 4-inch female threads for the installation of two matching connections. In this version, the handle of the stopcock is made of silver. Technical details:Material: nickel-plated brassColor: Silver Black (Black Sparkle, Shut-off Tap), Silver (Silver Shining; Handle)Thread: 2x G1 / 4 inches
High-End-CPU-Wasserkühler in Schwarz, passend für viele Intel-Sockel, Deckel aus transparentem Acryl, Kühlerboden aus Kupfer, schwarze Halterung aus Aluminium, integrierte aRGB-Beleuchtung
Tootekood: FD-FAN-DYN-X2-GP18-PWM-BKGTIN: 7340172702573Jahutid ja lisad
Product kirjeldus: Fractal Design Dynamic X2 GP-18 PWM case fan Product Type: Case fan Package Content: 4 screws (6-32), 4 fan screws, 4 M4 x 43mm screws värv: must Fan Diameter: 180 mm Fan kõrgus: 38 mm Fan Bearing: Long life liugelaager pöördekiirus: 300-1200 pööret minutis õhuvool: 44.9-153.7 cfm müratase: 16 - 35.4 dBA Power ühenduspesa: 4-pin fan connector nominaalpinge: 12 V Features: Pulse-width modulation (PWM) tugi, trip wire technology, 7 fan blade design mõõtmed (WxDxH): 18 cm x 18 cm x 3.8 cm kaal: 499 g
The final touch for a perfect PC You spend a lot of time to make your PC perfect. You’ve upgraded it for top performance, ultimate quietness, and unbeatable reliability. So what’s next? Our premium upgrade Power Cables, that’s what’s next. High quality, premium function, and flat out good looks come together in our line of premium Power Cables, intended for use with your high capacity be quiet! cable management power supply. These sleeved beauties in black are available in 8 S-ATA models for maximum convenience and compatibility with all type of cases, and come with a 3 year warranty. Mix and match lengths and connector arrays to achieve the perfect combination of stylish good looks, improved cooling airflow, and peripheral device support.
The nickel-plated adapter from Bitspower in the color shiny black, has a 90 degree angle and is rotatable. One side is intended for mounting hard tubes with an outside diameter of 12mm and the other side has a G1/4" external thread for mounting on radiators and Co. The two rubber rings seal the sides. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Black Angle: 90° Thread: G1/4 inch Connection: 1x Ø 12 mm
