During the development of the new BioniX P140 special emphasis was placed on a focused air flow and a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the BioniX P140 is particularly suitable for use on heat sinks, radiators as well as pinhole and filters. With a neodymium iron-boron magnetic ring of the latest generation, the BioniX P140 is significantly more efficient than its predecessors. Without sacrificing performance, this saves energy and significantly lowers the coil temperature of the engine. The operating noise of the newly developed ARCTIC engine is barely perceptible even at the lowest rpm. Thanks to sinusoidal magnetization, the motor of the P fans generates only 5% of the commutation frequency of a conventional DC motor. Thus, thanks to the even force distribution, there is no need for rubber buffering. Technical Details Fan: 140 mm, 200 - 1,950 rpm (PWM controlled) Air flow: 77.6 CFM / 131.92 m³ / h (@ 1,950 rpm) Noise level: 0.45 Sone (@ 1,950 rpm) Static pressure: 2.85 mm H2O (@ 1,950 rpm) Typical voltage: 12 V DC Cable length: 400 mm PST cable length: 50 mm
OPTIMISED FOR STATIC PRESSURE During the development of the new P8 PWM PST CO, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 PWM PST CO is particularly suitable for use on heatsinks and radiators. FOR CONTINUOUS OPERATION The premium quality Japanese dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential. MAXIMUM QUIETNESS, MINIMUM VIBRATION Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. EXTENDED LIFE SPAN A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Therefore Arctic extends the warranty to 10 years. 200 TO 3000 RPM REGULATED VIA PWM With a wide range of regulation and the PWM Sharing Technology (PST), the P8 PWM PST CO fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed. Technical Data Performance Fan Speed: 200 - 3000 rpm Airflow: 23.4 CFM / 40.3 m³/h Static Pressure: 1 (mm/H2O) Noise Level: 0.3 Sone Fan Fan Frame: Standard Controll Typ: PST Connector: 4-Pin Connector + 4 Pin Socket Fan Bearing: Dual Ball Bearing Electric Characteristics: Typical Voltage: 12 V DC Starting Voltage: 0 V Current: 0.09 A Cable Lenght: 400 mm Size & Weight Lenght: 80 mm Width: 80 mm Height: 25 mm Weight: 78.5 g
A-RGB for Full Colour Control The 12 A-RGB LEDs installed in the BioniX P120 A-RGB are autonomously controllable. The BioniX P120 A-RGB is compatible with the common A-RGB standards of leading motherboard manufacturers for the simplest possible use. It can therefore be fully illuminated directly via the A-RGB motherboard connection or via an external controller and synchronized with other hardware lighting. Easy installation and extension via Connector Technology The ARCTIC BioniX P120 A-RGB have a modular cable management and use two connections: a power-in and a connector output. ARCTIC uses an 8-pin connector for this, which forwards both the fan and lighting signals and considerably simplifies the cabling *. The included connector block also enables a wireless series connection. * all necessary cables are included High-quality plain bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced, increasing efficiency. In this way, less heat is generated, there is less bearing noise and the service life of the fan is extended. Optimised for static pressure With the BioniX P120 A-RGB, as with the entire P-series, special emphasis was placed on a focused airflow and high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. This makes the BioniX P120 A-RGB particularly suitable for use on heat sinks and radiators as well as with aperture plates and filters. Maximum smoothness, minimum vibration The operating noise of the newly developed ARCTIC motor is barely noticeable even at the lowest speed. Thanks to sinus magnetization, the P fan's motor generates only 5% of the commutation vibrations of a conventional DC motor. In addition, the ARCTIC BioniX P120 A-RGB has rubber pads on its contact surfaces for further decoupling. 400 to 2300 rpm regulated via PWM With a wide speed range and the connector functionality, the fan speed of the BioniX P120 A-RGB can be controlled synchronously with other fans. This reduces the noise development to a minimum while at the same time guaranteeing maximum cooling performance. Technical Data General Specifications Fan Speed: 400 - 2300 rpm Airflow: 48 CFM | 81,55 m³/h Static Pressure: 2,1 mm/H2O Noise Level: 0.45 Sone RPM Controll: PWM Connector: 2x A-RGB Fan 8-pin Connector Fan Bearing: Fluid Dynamic Bearing Electrical Fan Specifications Typical Voltage: 12 V DC Startup Voltage: 7 V Current: 0.13 A Cable Length: 400 mm + 80 mm A-RGB Specifications Number of LEDs LEDs: 12 A-RGB LEDs Typical Voltage: 5 V Current: 0.38 A Size & Weight Lenght: 120 mm Width: 120 mm Height: 30 mm Weight: 209 g
The Alphacool Eisbaer Pro Aurora CPU AIO water cooler is a special development for processors with particularly large CPU dies. These include the AMD Threadripper and Epyc processors and the Intel CPUs for the LGA 3647 socket. With the optional XPX Pro AM4 mounting bracket, the Alphacool Eisbaer Pro CPU cooler can also be used on AMD Ryzen processors. Large cooling surface The cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42 mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. With the included AM4 bracket, cooling an AMD Ryzen processor is also child's play. The cooling fins are 0.4 mm thick and also have an optimal distance of 0.4 mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3 mm thick, which allows the heat to reach the water and be dissipated as quickly as possible. Copper radiator As per usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water bearing components such as the antechambers, the cooling fins and the cooling channels to which the fins are soldered. The connection threads are made of brass for strength reasons. In addition, the cooling fins are only lightly painted. On closer inspection the copper shimmers through a little. A thick lacquer coating would result in a reduction of the cooling capacity. The fin density is at optimal 15FPI. Therefore the radiator works perfectly even at low airflow. A too high fin density would require fans with higher speed to achieve the same cooling capacity. A lower fin density would no longer benefit from fast rotating fans. So the golden mean was chosen. Real water cooling The Eisbaer Pro Aurora consists almost entirely of actual water cooling components. The extremely robust and durable TPV hoses are used in the enterprise products for servers and workstations. The hose connections also come from the Enterprise series from Alphacool and use the standard G1/4". This makes the Eisbaer Pro Aurora fully compatible with all common water cooling products. The quick-release fastener allows easy expansion of the AIO with additional components. The most important of these are the prefilled radiators and the Eiswolf GPU AIO water cooling system. Fan and lighting The entire Eisbaer Aurora Pro cooler is equipped with addressable digital RGB LEDs. This gives a real eye-catcher in the Case. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. Of course all Digital RGB LEDs can be controlled at will. Depending on the controller almost all effects are possible. How to connect everything The fans are normally controlled via a 4-pin PWM connector. An included Y-adapter for the fans makes it easy to connect them to the mainboard. This allows all fans to be controlled and regulated via one connector. Each fan has a 3-pin JST connector including Y-adapter for the LED illumination. This allows the fans to be connected directly together and can also be controlled simultaneously via a controller. For the connection to a typical 3-pin 5V connector a corresponding adapter is included. Alternatively, the included Digital RGB controller can be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard. The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market. Data radiator L x W x H 390 x 120 x 30 mm (+/- 3%) Material cooling fins Copper Material chambers Copper Material cooling channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Data cooler and pump L x W x H 64 x 79 x 54,3 mm Number of LEDs 10x Digital RGB LEDs Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ (+ 1x Fillport G1/4“) Pump typ DC-LT Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow rate 75 L/h Voltage 12V DC Power consumption 4W MTBF 50.000 h Data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Net weight 187 g Max working temperature 60 °C Certificates CE, FC, ROHS Compatibility list: - Intel: 1700 / 2011 / 2011-3 / 2066 / 3647 Narrow & Square / LGA 4189 - AMD: AM4 / TR4 / sTRX4 / SP3 / sWRX8
Product kirjeldus: CORSAIR iCUE COMMANDER CORE XT - fan LED controller Product Type: Fan LED controller Features: Magnetic installation, 2 temperature sensors
Thermaltake TOUGHFAN 12cm fan with hydraulic bearing. TOUGHFAN 12cm is a product that stands out not only for its solid workmanship, but above all for its excellent performance. Thanks to the use of a special hydraulic bearing and innovative design, this fan provides unparalleled efficiency in dissipating heat from the computer. One of the key features of TOUGHFAN 12cm is a wide range of speed regulation, allowing you to adjust the fan's operation to the individual needs of the user. The maximum speed of 2000 rpm guarantees effective cooling even in the case of intensive equipment load, while the minimum speed of 500 rpm allows for quiet operation in everyday use. TOUGHFAN 12cm is also characterized by a low noise level, which does not exceed 22.3 dB. This fan will work perfectly as a cooling element of the computer case, providing optimal working conditions for electronic components. Its universal size of 12 cm and standard 3-pin connector make it compatible with most cases available on the market.
Get high-performance cooling, display a favorite animated GIF or static image, monitor real-time PC performance metrics, see music that's currently playing, stream browser content and more with NZXT CAM software.2.36 diameter wide-angle LCD display with 640x640 resolution and 60 Hz refresh rate provides a sharp image from any viewing angle Screen supports the display of custom images, animated GIFs, and CAM system info with adjustable orientation Powerful Asetek pump provides optimal cooling and up to 2,800 RPM whisper-quiet operation Includes F140P/F120P Static Pressure fans Single breakout cable simplifies installation Rubber tubing is reinforced with nylon-braided sleeves to prevent leaks Control custom screen content, pump speed, and zero-noise fan curves with NZXT CAM
The Lian Li GALAHAD II 240 Trinity SL-INF is a complete water cooling solution for your CPU. It features a 240mm radiator and two SL-INF 120mm fans for efficient cooling. The AIO cooler comes in a sleek black design with a beautiful infinity mirror effect. It also includes three interchangeable pump covers and angled fittings that can be freely rotated. Compatible with both AMD and Intel sockets, including LGA 1700, this cooler offers a quiet and stylish cooling solution for your system.
The CORSAIR RS120 case fan delivers powerful cooling performance with its 120 mm diameter and 25 mm height. Featuring a rotation speed that ranges from 420 to 2100 rpm, this fan caters to diverse airflow needs, providing an airflow of 13.3 to 72.8 cfm for efficient cooling. With Pulse-width modulation (PWM) support, it dynamically adjusts speed based on system temperature, ensuring optimal performance while minimizing noise. The fan operates with a noise level between 10 to 36 dBA, making it suitable for silent or high-performance builds. In addition, the RS120 incorporates a zero RPM fan mode for silent operation when cooling is not needed. Its daisy-chain design simplifies cable management in PC builds by enabling multiple fans to be connected seamlessly. With a magnetic dome bearing, it provides longevity and efficient performance, while air pressure of 0.2 to 4.15 mm ensures focused airflow to critical components. The package includes 4 mounting screws for easy installation.
3-pack of 120 mm PWM fans in black, unique wireless signal transmission, improved daisy-chaining, with addressable RGB LEDs and LCD, max. 1,900 RPM, max. 87.41 m³/h airflow, and max. 2.1 mmH2O static pressure, controller included
Zalman ALPHA2 A36 360mm AIO Water Cooling - White The Zalman ALPHA2 A36 360mm AIO water cooler in stylish white is the perfect choice for high-end gaming setups and performance systems. With its generous 360mm radiator, this water cooler offers exceptional heat dissipation, making it ideal for overclocked processors and performance-intensive applications. The ALPHA2 A36's double-sealed pump and quiet, powerful fans ensure long-lasting, reliable cooling with minimal noise levels. The integrated RGB lighting allows for personal customization and gives your system a visually impressive highlight. Thanks to its compatibility with most Intel and AMD sockets, the water cooling system can be easily installed in various systems. The elegant white design complements modern PC builds and harmonizes perfectly with other components. Main features of the Zalman ALPHA2 A36 360mm AIO water cooling in white: Large 360mm radiator surface for maximum cooling performance Double sealed pump for safety and durability Quiet fans for efficient cooling without noise RGB lighting for individual customization Universal compatibility with Intel and AMD sockets Choose the Zalman ALPHA2 A36 360mm AIO water cooler in white for first-class cooling and a modern look – ideal for demanding gaming and high-performance systems!
Kvaliteetne jahutuslahendus arvutikasutuseks • Kahe D30 ventilaatoriga integreeritud 360/420 mm raam • Suur vaskpõhi ja tihe jahutusplaat • Tõhus vedeljahutuslahendus protsessoritele • Lihtne kaablite haldamine
Original part number TG-G1.5-01 Product name Gembird Heatsink Thermal Paste Grease 1.5g Producer Gembird Class of product Cooling accessories Additional information Thermal compund (grease) for heatsinksExcellent thermal impedancePerfect stability - will not separate, run, migrate, or bleedNon capacitive or electrically conductiveWeight: 1.5 gColor: GrayThermal conductivity: > 4.5 W / mKThermal Impedance Density: > 2.5Viscosity: 76 CPS
