With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2000 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2000 rpm, it provides an air flow of 92.3 CFM, together with a high static pressure of 2.53mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5 Technical data radiator L x W x H 460 x 140 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 20 Fan size 140mm Fan slots 3 one-sided / 6 double-sided Color black Technical data fans L x W x H 140 x 140 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.26 (Max. 0.3) A Rated Power 3.12 (Max. 3.6) W Rated Speed 0 - 2000rpm/min (±10%) Max. Air Flow 92.3CFM Max.Static Pressure 2.53mm-H2O Noise level (rated voltage, mute room, distance 1m) 34.3 (Max. 36) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 400mm
ROG Strix LC II 240 delivers high-performance CPU liquid cooling with sleek, modern aesthetics. Featuring a closed-loop design and ROG radiator fans, the cooler unleashes the full potential of an Intel or AMD CPU while enabling subtle multicolor lighting effects to accentuate your build.
The maintenance-free all-in-one liquid cooling systems from Xilence can convince with an outstanding price-performance ratio and easy handling.The installation with the quick-mount-system really easy and safe and due to the included multi-socket-mountings it can be applied on every socket from AMD or Intel.The elegant sleeved and soft tubes follow easily the planned way of mounting, no matter if the radiator is placed in the back, top, front or bottom of the case.The huge full-copper heat-spreader below the LED lit pump head and the powerful radiators, together with the hydrobearing PWM fans guarantee silent running and high performance.
All-In-One water cooling in black, 360mm radiator, pump cover with configurable IPS display, powerful Asetek PWM pump, three SL-INF 120mm ARGB PWM fans, elegant design and quiet operation, compatible with AMD and Intel sockets (including AM5 and LGA 1700)
All-in-one water cooling in white, 360mm radiator, pump cover with configurable IPS display, high-performance Asetek PWM pump, three SL-INF 120mm ARGB PWM fans, elegant design and quiet operation, compatible with AMD and Intel sockets (including AM5 and LGA 1700).
The new Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details: Material: brass Colour: chrome Diameter: 22 mm Height: 20 mm Thread: G1/4" Thread length: 5 mm HardTube size: 13 mm Compatibility: PETG, acrylic, brass and glass tubes Weight: 0,023 kg Scope of supply: 1x Alphacool Eiszapfen PRO 13mm HardTube Fitting G1/4 - Deep Black Sixpack
The new Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details: Material: brass Colour: chrome Diameter: 26 mm Height: 23 mm Thread: G1/4" Thread length: 5 mm HardTube size: 16 mm Compatibility: PETG, acrylic, brass and glass tubes Weight: 0,042 kg Scope of supply: 1x Alphacool Eiszapfen PRO 16 mm HardTube Fitting G1/4 - Chrome Sixpack
GPU-Wasserkühler im Full-Block-Design, für GIGABYTE Aorus 3090/3080 Xtreme/Master, vernickelter Kupferblock mit Acrylglas-Deckel, integrierte ARGB-Beleuchtung
Sechseckiger Durchflusssensor von Bitspower, mit sechs Anschlüssen (G1/4), schwarzes Schaufelrad mit Keramiklager, inklusive Verschlüssen und Innensechskantschlüsseln, mit RGB-LED-Beleuchtung (4-Pin, 12 Volt)
Tootekood: R-LP360-BKMSNC-G-1GTIN: 6933412728962Jahutid ja lisad
LP360 | Liquid | LGA1150/LGA1151/LGA1155/LGA1200/LGA1700/LGA1851/SAM4/SAM5 | Fan speed 600~2400 RPM±10% | Air flow 72.04 cfm | Fan light | Noise level, max 38.71 dB | Weight 1.716 kg
The Alphacool Core reservoir has an integrated pump top for powerful D5 pumps and comes with a VPP Apex pump. The tube of the reservoir is made of acrylic, the D5/VPP pump top and the lid of acetal. The combination of these two materials gives the expansion tank a discreet appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube.What's new?Compared to the previous Eisbecher models, the acrylic tube of the Core reservoir has an external thread. This provides more stability and safety when connecting the lid and pump top to the tube. Also new is the integrated digital aRGB lighting. 12 digitally addressable RGB LEDs in the pump top are included in the scope of delivery of the Core reservoir and no longer have to be purchased separately. Extensive mounting optionsMounting option 1:Stands are included in the scope of delivery, which, among other things, allow the expansion tank to be mounted on the bottom of the enclosure. Mounting option 2:Included in the scope of delivery are 120mm/140mm mounting frames, which can be used to mount the Core expansion tank as desired on free fan spaces, radiators or on the fans on radiators.Digitally addressable RGB lighting12 digitally addressable RGB LEDs illuminate the aycryl tube of the reservoir. They are mounted in a ring at the lower end of the tube in the transition to the pump top and provide brilliant illumination of the entire expansion tank. In combination with the Lighttower water effect, a very special ambience is achieved. The digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a digital RGB capable mainboard.Lighttower water effectA special water effect is created in the core reservoir via the riser tubes. If you do not fill the reservoir beyond the top edge of the riser tube, you get a kind of fountain effect. In this case, the water is pushed out the sides of the riser tube and splashed against the glass tube. Depending on the flow of the circuit, the effect is stronger or weaker. The effect can be placed at the lower or upper inlet using the riser tubes included in the delivery.Pump compatibilityThe Alphacool Core expansion tank has an integrated pump top and is compatible with all original D5 pumps as well as all Alphacool VPP pumps. The pump retaining ring, a pump O-ring and all screws are included in the scope of delivery.PumpThe VPP Apex pump does without a spherical bearing and uses a ceramic shaft. The motor's coils have been moved from the inside to the outside. These changes have the effect that the pump is fundamentally more stable and smoother running, and any vibrations that arise have been significantlyreduced. Another positive side effect is that power consumption has been almost halved as a result. Compared to Alphacool's Eispumpe, the power is not supplied via a 4-pin Molex connector. Instead, the Apex VPP pump is connected to the power supply using a SATA connector. The Apex VPP pump has a 4-pin fan connector that connects to the motherboard or to an external controller. This allows you to control the speed range of the pump via PWM and read out the RPM signal. Technical dataL x W x H251 x 76,5 x 76,5 mmPump compatibilityD5Capacity400 mlMaterial Pump top & coveracetalMaterial tubeacrylicConnection3x G1/4“ internal threadMaximum working temperature60 °CPressure tested0,8 BarQuantity of digital aRGB LEDs12Power digital aRGB LEDs5VPower connector digital aRGB LEDs3-pin JST (male & female switch)Weight621 gColorblackTechnical data VPP ApexDimensions (L x W x H)65 x 65 x 41mmMaterial pumpsynthetic materialMaterial pump coveraluminiumMaterial axleceramicsConnections4-Pin PWM | SATARotational speed2500 - 4500 RPMCable lenghts4-Pin PWM - 48cm | SATA - 48cmOperating voltage8-13V DC / 14W IP32Starting voltage12V DCMaximum pumping head4,25 mMax flow340 l/hMax working temperature60 °CNet weight276 gcolorblack
The RC01 from Jonsbo is connected to the power supply unit via SATA and then provides a 3-pin RGB connector. RGB components such as fans, coolers, LED strips and much more can be connected to these. Up to 100 addressable RGB LEDs can be controlled via a button on the controller or a housing button. 16 lighting modes are available.
Kompakter 280 mm Radiator für Wasserkühlungen, aus Kupfer, hohe Finnendichte, für besonders kleine Custom-Loops, für Hardware aus dem Mittelklassensegment
StarTech.com HEATGREASE20. Toote värv: Valge. Laius: 72 mm, Sügavus: 18 mm, Kõrgus: 18 mm. Pakendi laius: 150 mm, Pakendi sügavus: 85 mm, Pakendi kõrgus: 22 mm
be quiet! Shadow Rock TF 2. Sobilik: Protsessor, Tüüp: Jahuti, Ventilaatori läbimõõt: 13,5 cm. Toote värv: Must, Roostevaba teras, Kaabli pikkus: 0,2 m. Nimivool: 0,11 A, Võimsustarve (tüüpiline): 1,32 W. Laius: 165 mm, Sügavus: ...
The nickel-plated adapter from Bitspower in shiny silver has two G1/4 inch external threads. The adapter is rotatable, so that the screwing on is not unnecessarily complicated. Technical Data: Material: Nickel-Plated Brass Main Color: Shiny Silver Thread: G1/4" on both side Thread Length: 5mm
The adapter in white from Bitspower has a G1/4" external thread and a G1/4" internal thread. It has a 90 degree angle and can be rotated on the thread for easier tube alignment. Technical Data: Material: Brass Colour: White Angle: 90 ° Thread: G1/4" and inner G1/4" Thread Length : 5 mm
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This 45 degree angled G1 / 4 "fitting for hoses with 13mm inner diameter does not use a union nut, which is why any tube thickness and thus outer diameter can be used. The blood red connection can be turned on the side of the screw thread. This greatly facilitates installation and allows for precise alignment. Note: For a better and safer fit, we recommend using a cable tie or a hose clamp. Furthermore, the rotation function of the connections should always be used in the disassembled state, as this is relatively difficult to move due to the design. When installed, do not apply force to connections to avoid damaging the connectors themselves and the radiators on them. Technical details:Material: brassColor whiteConnections: Thread: G1 / 4 inch hose: 13 mm (inside diameter)
Tootja: AKYGA Tootegrupp: ventilaator korpustele Fan's size class: 80 mm ventilaatori laagri tüüp: liugelaager ventilaatori pöördekiirus: -2000 pööret minutis ventilaatori müratase: -25 dB laius: 80 mm kõrgus: 80 mm paksus: 25 mm toite ühenduse tüüp: 4-pin Termistor: Ei vastupidavus: 30000 tundi õhuvool: -616 cm3/min LED kogus: andmed puuduvad LED värv: andmed puuduvad Lisaandmed: andmed puuduvad Lisainfo: Product site
The adapter for 16mm (AD) Hard Tubes in matt black from Bitspower is especially designed for the connection of two graphics cards with SLI/ Crossfire to bridge the short distance. If two graphics cards are used, two of the adapters are also required. They are sealed with two rubber rings. The adapter is especially well compatible with Bitspower's Crystal Link Tube series. Technical Data: Material: Nickel-Plated Brass Colour: Matt Black Connection: 16 mm (OD) Thread: G1/4" Thread Length: 5 mm
Toote kirjeldus inglise keeles:Dual panel-mounted socket threads for "internal/external" fittings on a computer chassis L-bracket. The female G 1/4 BSPP threaded couplings can be removed from the L-bracket and used as panel-mountable unions. Nickel-plated brass. This product may need to be temporarily disassembled during installation.
Thermaltake's Riing Quad 14 RGB is a PWM controlled fan with a quadruple 16.8 million colour LED ring. Due to the self-lubricating hydraulic bearing, the fan benefits from very quiet operation and low heat generation. As the sealing cap prevents lubricant leakage, a long service life is also guaranteed. The design of the fan is based on performance, which is why it features high static pressure and efficient cooling. The anti-vibration pads also ensure low noise levels. The four independent LED rings, with over 54 addressable LEDs in total, provide impressive light coverage and high colour intensity. The extensive and breathtaking effects add the finishing touches to your housing and give it a unique look. As other controllers (also from Thermaltake) are not compatible with the fans, the 3-piece set includes a separate controller. It is recommended to connect only 5 Riing Trio fans per controller (connected with a Molex cable). If you own a lot of Thermaltake RGB PLUS products, you can really let off steam with the TT RGB PLUS software. Whether you want to synchronise the lighting in games, movies and music or specific lighting modes, colours and speeds, the software will make your system really shine. In addition, the software can also regulate fan speeds, for example, and also offers the option of voice control. With Thermaltake's NeonMaker software, the possibilities are even extended to create incredible and dynamic light shows. Furthermore, all Thermaltake TT RGB PLUS products are compatible with Razer chroma lighting and Amazon Alexa. Technical Data: Dimenson: 140 x 140 x 25 mm Interface: USB 2.0 connectors (9 Pin) Fan Stated Voltage: 9.0 V Fan Rated Voltage: 12 V and 5 V Rated current: 12V - 0.12 A , 5V - 0.9 A Power Input: 12V - 4.32 W, 5V - 13.5 W Fan Speed: 500 - 1400 rpm Max. Air Pressure: 1.71 mm-H2O Max Air Flow: 60.17 CFM Noise: 26.1 dB-A Bearing Type: Hydraulic Bearing Life Expectation: 40,000 hrs, 25℃ Weight: 238 g
The Alphacool Eisbaer Pro Aurora CPU AIO water cooler is a special development for processors with particularly large CPU dies. These include the AMD Threadripper and Epyc processors and the Intel CPUs for the LGA 3647 and LGA 4189 socket. With the optional XPX Pro AM4 mounting bracket, the Alphacool Eisbaer Pro CPU cooler can also be used on AMD Ryzen processors. Large cooling surface The cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42 mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. With the additionally available AM4 bracket, cooling an AMD Ryzen processor is also child's play. The cooling fins are 0.4 mm thick and also have an optimal distance of 0.4 mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3 mm thick, which allows the heat to reach the water and be dissipated as quickly as possible. Copper radiator As per usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water bearing components such as the antechambers, the cooling fins and the cooling channels to which the fins are soldered. The connection threads are made of brass for strength reasons. In addition, the cooling fins are only lightly painted. On closer inspection the copper shimmers through a little. A thick lacquer coating would result in a reduction of the cooling capacity. The fin density is at optimal 15FPI. Therefore the radiator works perfectly even at low airflow. A too high fin density would require fans with higher speed to achieve the same cooling capacity. A lower fin density would no longer benefit from fast rotating fans. So the golden mean was chosen. Real water cooling The Eisbaer Pro Aurora consists almost entirely of actual water cooling components. The extremely robust and durable TPV hoses are used in the enterprise products for servers and workstations. The hose connections also come from the Enterprise series from Alphacool and use the standard G1/4". This makes the Eisbaer Pro Aurora fully compatible with all common water cooling products. The quick-release fastener allows easy expansion of the AIO with additional components. The most important of these are the prefilled radiators and the Eiswolf GPU AIO water cooling system. Fan and lighting The entire Eisbaer Aurora Pro cooler is equipped with addressable digital RGB LEDs. This gives a real eye-catcher in the Case. The fan used is the Aurora Rise with 140mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 2.20 mm/H 2 O and offers a max. air flow of 154.1 m³/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. Of course all Digital RGB LEDs can be controlled at will. Depending on the controller almost all effects are possible. How to connect everything The fans are normally controlled via a 4-pin PWM connector. An included Y-adapter for the fans makes it easy to connect them to the mainboard. This allows all fans to be controlled and regulated via one connector. Each fan has a 3-pin JST connector including Y-adapter for the LED illumination. This allows the fans to be connected directly together and can also be controlled simultaneously via a controller. For the connection to a typical 3-pin 5V connector a corresponding adapter is included. Alternatively, the included Digital RGB controller can be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard. The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market. Technical data radiator L x W x H 316 x 144 x 30 mm (+/- 3% in the range of the pre-chambers) Material fins, chambers & channels copper Material threads brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes For fan size 140 mm Fan mounting options 2 x one-sided / 4 x both-sided Technical data cooler and pump L x W x H 64 x 79 x 54,3 mm Number of LEDs 10x Digital RGB LEDs Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ (+ 1x Fillport G1/4“) Pump typ DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow rate 75 L/h Technical data fans Speed 0 - 2000 RPM Static pressure 2,20 mm H 2 O Air flow rate 154,1 m³/h Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 140 x 140 x 25 mm Compatibility list: - Intel: 1700 / 2011 / 2011-3 / 2066 / 3647 Narrow & Square / LGA 4189 - AMD: AM4 / TR4 / sTRX4 / SP3 / sWRX8
