EK-Loop UNI Pump Reservoir Bracket - 120mm is a mounting adapter for installation of EK D5, DDC, SPC, and VTX pumps and pump-reservoir combo units to any 120mm fan mounting hole pattern (105mm hole spacing). Additionally, it can be used with EK-RES X3 Holder 60mm (2pcs) to mount any reservoir or pump-reservoir combo with a tube of 60mm in diameter. It can be used horizontally or vertically. The offset on the bracket allows for precise placement of the pump or reservoir according to your needs for clearance or easier tube routing. By turning the bracket around the offset can be moved left, right, back, or forward in a horizontal setup, and also left, right, up, or down in a vertical setup. Made from press-bent 1,5mm thick painted steel. The height of the bracket is 11.5mm. This product is compatible with the following EK products: Vertical: EK-Quantum Kinetic TBE D5 series Vertical: EK-XRES Revo D5 series Vertical: EK-XRES X3 series Horizontal: EK-XTOP DDC series Horizontal: EK-XRES SPC Classic series Horizontal: EK-Quantum Kinetic TBE DDC series Horizontal: EK-Quantum Kinetic TBE VTX series Horizontal and Vertical: EK-XTOP Revo D5 series Scope of Delivery: EK-Loop Uni Pump Reservoir Bracket - 120mm 5x polyamide washer M4 0.8mm 5x screws M4x6 DIN7984 5x nut M4 Allen key 2.5mm
EK-Loop UNI Pump Reservoir Bracket - 140mm is a mounting adapter for installation of EK D5, DDC, SPC, and VTX pumps and pump-reservoir combo units to any 140mm fan mounting hole pattern (125mm hole spacing). Additionally, it can be used with EK-RES X3 Holder 60mm (2pcs) to mount any reservoir or pump-reservoir combo with a tube of 60mm in diameter. It can be used horizontally or vertically. The offset on the bracket allows for precise placement of the pump or reservoir according to your needs for clearance or easier tube routing. By turning the bracket around the offset can be moved left, right, back, or forward in a horizontal setup, and also left, right, up, or down in a vertical setup. Made from press-bent 1,5mm thick painted steel. The height of the bracket is 11.5mm. This product is compatible with the following EK products: Vertical: EK-Quantum Kinetic TBE D5 series Vertical: EK-XRES Revo D5 series Vertical: EK-XRES X3 series Horizontal: EK-XTOP DDC series Horizontal: EK-XRES SPC Classic series Horizontal: EK-Quantum Kinetic TBE DDC series Horizontal: EK-Quantum Kinetic TBE VTX series Horizontal and Vertical: EK-XTOP Revo D5 series Enclosed: EK-Loop UNI Pump Reservoir Bracket - 140mm 5x polyamide washer M4 0.8mm 5x screws M4x6 DIN7984 5x nut M4 Allen key 2.5mm
Thermaltake TOUGHFAN 12cm fan with hydraulic bearing. TOUGHFAN 12cm is a product that stands out not only for its solid workmanship, but above all for its excellent performance. Thanks to the use of a special hydraulic bearing and innovative design, this fan provides unparalleled efficiency in dissipating heat from the computer. One of the key features of TOUGHFAN 12cm is a wide range of speed regulation, allowing you to adjust the fan's operation to the individual needs of the user. The maximum speed of 2000 rpm guarantees effective cooling even in the case of intensive equipment load, while the minimum speed of 500 rpm allows for quiet operation in everyday use. TOUGHFAN 12cm is also characterized by a low noise level, which does not exceed 22.3 dB. This fan will work perfectly as a cooling element of the computer case, providing optimal working conditions for electronic components. Its universal size of 12 cm and standard 3-pin connector make it compatible with most cases available on the market.
The Alphacool Eisbaer Pro Aurora CPU AIO water cooler is a special development for processors with particularly large CPU dies. These include the AMD Threadripper and Epyc processors and the Intel CPUs for the LGA 3647 and LGA 4189 socket.Large cooling surfaceThe cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42 mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. The cooling fins are 0.4 mm thick and also have an optimal distance of 0.4 mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3 mm thick, which allows the heat to reach the water and be dissipated as quickly as possible.Copper radiatorAs per usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water bearing components such as the antechambers, the cooling fins and the cooling channels to which the fins are soldered. The connection threads are made of brass for strength reasons. In addition, the cooling fins are only lightly painted. On closer inspection the copper shimmers through a little. A thick lacquer coating would result in a reduction of the cooling capacity. The fin density is at optimal 15FPI. Therefore the radiator works perfectly even at low airflow. A too high fin density would require fans with higher speed to achieve the same cooling capacity. A lower fin density would no longer benefit from fast rotating fans. So the golden mean was chosen.Real water coolingThe Eisbaer Pro Aurora consists almost entirely of actual water cooling components. The extremely robust and durable TPV hoses are used in the enterprise products for servers and workstations. The hose connections also come from the Enterprise series from Alphacool and use the standard G1/4". This makes the Eisbaer Pro Aurora fully compatible with all common water cooling products. The quick-release fastener allows easy expansion of the AIO with additional components. The most important of these are the prefilled radiators and the Eiswolf GPU AIO water cooling system.Fan and lightingThe entire Eisbaer Aurora Pro cooler is equipped with addressable digital RGB LEDs. This gives a real eye-catcher in the Case. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. Inaddition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. Of courseall Digital RGB LEDs can be controlled at will. Depending on the controller almost all effects are possible.How to connect everythingThe fans are normally controlled via a 4-pin PWM connector. An included Y-adapter for the fans makes it easy to connect them to the mainboard. This allows all fans to be controlled and regulated via one connector. Each fan has a 3-pin JST connector including Y-adapter for the LED illumination. This allows the fans to be connected directly together and can also be controlled simultaneously via a controller. For the connection to a typical 3-pin 5V connector a corresponding adapter is included. Alternatively, the included Digital RGB controller can be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard.The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market.With the Alphacool LGA 4677 Mounting Bracket (article no.: 13764), this cooler is also compatible with the Intel socket LGA 4677. Compatibility:AMD: AM4 / AM5 / SP3 / SP6 / sTR5 / sWRX8 / TR4Intel: LGA 1700 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 3647 / LGA 4189 (optional) / LGA 4677 (optional) Technical data radiatorL x W x H279 x 124 x 30 mm (+/- 3% in the range of the pre-chambers)Material cooling finscopperMaterial chamberscopperMaterial cooling channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads2x G1/4"For fan size120 mmFan mounting options2 x one-sided / 4 x both-sidedTechnical data cooler and pumpL x W x H64 x 79 x 54,3 mmMaterial cooler bottomNickel plated copperMaterial cooler topPMMAThreads2 x G1/4“ (+ 1x Fillport G1/4“)Pump typDC-LT 2Pump speed2600 rpm (+/- 10%)Head of delivery1 mMaximum flow rate72 L/hVoltage6-13,5V DCPower consumption3,2WMTBF50.000 hNumber of aRGB Digital LED10Technical data tubeLength40 cmMaterial tubeTPV (EPDM/PP)Colorblack mattTube size12,7 / 7,6 mmHardness grade35 Shore-A to 50 Shore-DWorking temperature-50 to +155 °CTechnical data fittingsL x D straight fitting24 x 18 mmQuantity straight fittings4xFor tube size12,7 / 7,6 mmMaterial fittingsnylonTechnical data quick fastenersL x D95 x 27 mmMaterialnylonFor tube size12,7 / 7,6 mmColorblackTechnical data fanSpeed0 - 2500 RPMStatic pressure3,17 mm/H2OAir flow rate119,8 m³/hBearingsSleeve bearingFan connector4-Pin PWMNumber of aRGB Digital LEDFrame: 12 / Hub: 8Connection Digital aRGB3-Pin JST + 3-Pin 5VDimensions120 x 120 x 25 mmMax working temperature60 °CWarranty: 3 years???? Warranty Terms
X Dream i117 is a low profile aluminum extrusion fin specially designed for Intel platform with only 60mm height. The cross shaped design can centralize airflow for heat dissipation providing excellent heat dissipation. The circular fan operates silently with only 19dBA suitable for quiet working environment.
The ARCTIC MX-4 is a new thermal compound that guarantees exceptional heat dissipation from components and maintains the needed stability to push your computer system to its maximum. The ARCTIC MX-4 continues to be overclocker’s ultimate choice when choosing thermal compound.Content 20 gramme
- Supports Intel LGA1150/1151/1155/1156 processors- Designed for low-profile systems at 48mm tall- Large custom 92mm PWM fan for excellent cooling and low noise- True solid copper contact base enables heat dissipation up to 95W- Copper center and base with extruded aluminum fins- Easy to installSilverStone Technology’s Nitrogon NT08-115X is a low-profile CPU cooler designed for space limited applications that utilizes LGA1150/1151/1155/1156 platforms. It has a true, solid copper center and base with extruded aluminum fins for superior thermal conductivity for up to 95W, a figure that rivals many larger and original coolers. The custom 92mm PWM fan was designed with fan blades to achieve the highest air pressure possible while maintaining an acoustic profile that is rare for cooler of this size. At a total height of 48mm tall, the NT08-115X is an excellent upgrade for any low-profile system on LGA1150/1151/1155/1156 platforms.SobilikProtsessorTüüpVentilaatorVentilaatori läbimõõt9,2 cmToetatud protsessoripesadLGA 1150 (Socket H3)Pöörlemiskiirus (min)1200 RPMPöörlemiskiirus (max)3500 RPMMüratase (aeglane kiirus)21,56 dBMüratase (suur kiirus)61,88 dBMinimaalne õhuvool10,34 cfmMaksimaalne õhuvool47 cfmMinimaalne õhusurve0,7 mmH2OMaksimaalne õhusurve5,94 mmH2OImpulsi-laiuse modulatsiooni (PWM) tugiJahVentilaatorite arv1 ventilaator(id)Jahutusvõimsus (TDP)95 WToote värvMust, VaskMaterjalVaskVõimsustarve (tüüpiline)95 WLaius101 mmSügavus101 mmKõrgus48 mmKaal213 gVentilaatori mõõdud (laius x sügavus x kõrgus)92 x 92 x 25 mmVärvJahMüratase61,88 dB
Technical Data: Material: Aluminium Color: Black Compatibility: EK Water Blocks EK-FC RTX 2080 +Ti Classic RGB - Nickel + Acryl Scope of Delivery: 1x EK Water Blocks EK-FC RTX 2080 +Ti Backplate Classic - Black
