be quiet! Pure Base 600. Kujutegur: Miditorn, Tüüp: PC, Materjal: ABS-sünteetika, Teras. Toetatud elektritoite tarne vormi faktorid: ATX. Installitud esiventilaatorid: 1x 140 mm, Installitud tagaventilaatorid: 1x 120 mm
DIMENSIONS : (D)420mm X (W)269.5mm X (H)380mm MOTHERBOARD : E-ATX (Max 280 mm wide)/ATX/ Micro-ATX/ Mini-ITX PSU : SFX/ SFX-L MATERIAL : Steel 4 mm Tempered Glass 2mm Aluminum (top and left panel) FAN SUPPORT : Top: 3x 120mm or 2x 140mm Side: 2x 120mm or 2x 140mm Bottom: 3x 120mm or 2x 140mm Rear: 1x 120mm RADIATOR SUPPORT : Top: 360mm or 280mm or 240mm radiator Side: 240mm or 280mm radiator Bottom: 360 or 280mm or 240mm radiator GPU LENGTH CLEARANCE : 395mm CPU COOLER HEIGHT CLEARANCE : 170mm VGA Length : 370mm DRIVES : Right side 2 x 2.5″ SSD + back plate 2 x 3.5″ HDD (or SSD) EXPANSION SLOTS : 3 or 5 or 7 slots (depends on back panel) IO PORTS : 2 x USB 3.0, 1 x USB 3.1 TYPE-C, 1 x HD Audio, Power Button DUST FILTERS : 1 x Top, 1 x Bottom, 2 x Side
Compact case with less than 9L volume; Supports up to m-ATX motherboards; 80mm fan pre-installed; Classic Design; 80PLUS Bronze 300W Power Supply Included
Spacious Micro-ATX case in black, for motherboards up to Micro-ATX, side panel and front made of Tempered Glass, up to 8x 120-mm fans possible, 2x radiators up to 360 mm possible, graphics cards up to 400 mm in length, dual-chamber design.
ARGB - Middle Tower | czarna | window | no power supply | 2 x USB 2.0, 2 x USB 3.0, 2 x Jack | 447mm x 220mm x 510mm | 4 x wen 120mm | ARGB backlight (NPC-1518)
MÕÕTMED: 215 x 473.5 x 454 EMAPLAADI TUGI: Mini ITX; Micro ATX; ATX GRAAFIKAKAARDI PIKKUS KUNI: 405 mm PROTSESSORI ÕHKJAHUTI KÕRGUS KUNI: 170 mm TOITEPLOKI ÜHILDUVUS: ATX; 17 cm KAABLITELE RUUM: Olemas KAAL: 7.2 kg Ühenduvus I/O PANEEL: 1 x headphones; 2 x USB 3.0; 1x microphone PCI PESASID KUNI: 7 Kettasahtlid: 4x 2.5" pesa 3x3.5" Ventilaatoritugi: ÜLESSE PAIGALDATUD - 1x Aspect 12 RGB ETTE PAIGALDATUD -2x Aspect 12 ÜLESSE VÕIMALIK PAIGALDADA 2x120/140 TAHA VÕIMALIK PAIGALDADA 1x120 ETTE VÕIMALIK PAIGALDADA 2x120/140 Radiaatoritugi: ÜLEVAL - 240 mm
Prime AP201 Tempered Glass | Max GPU Length 338 mm; PSU Length 140-180 mm | Micro | PSU Not included | Top: 3 x 120 mm; 2 x 140 mm, Rear: 1 x 120 mm, Pre-installed Fans (Rear): 1 x 120 mm | Dimensions 205 x 350 x 460 mm
No. of drive bays: 4 MOLEX power connectors: 2 Floppy power connectors: 1 SATA power connectors: 4 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 0 Number of power supply connector 4+4-pin 12V: 1 8-pin 12V power connectors: 0 Weight: 4.75
XPG VALOR MESH C | CASE MIDITOWER ATX W/O PSU/VALORMESH4VW-WHCWW ADATA | MidiTower | PSU Not included | Front: 3 x 120mm Fans; Rear: 1 x 120mm Fan | Dimensions 460 x 210 x 371 mm
Corsair mid-tower 3000D tempered glass case, black The CORSAIR 3000D AIRFLOW mid-tower ATX case provides intensive air circulation and excellent cooling. A steel front panel and two pre-installed CORSAIR SP120 ELITE fans ensure optimal airflow through the case, while a tempered glass side panel allows for easy viewing of components. Up to 8 120mm fans or up to 4 140mm fans can be accommodated in the intelligently organized interior. With room for radiators up to 360mm in size, support for 3.5" and 2.5" drives, and support for four-slot graphics cards up to 360mm in length, you can create a high-performance system. The front I/O panel has two USB 3.2 Type A ports and a microphone and headphone jack. Outstanding Cooling Capabilities: Spacious interior holds up to 8 x 120mm cooling fans or 4 x 140mm fans with multiple heatsinks including one 360mm front and one 280mm on top (depending on the height of the memory modules) RAM). CORSAIR AirGuide Technology: The two pre-installed SP120 ELITE fans generate 24.7 dBA of noise and feature CORSAIR AirGuide technology that increases static pressure and directs airflow for better cooling. Dedicated graphics card cooling: The case accommodates the latest graphics cards and has two additional 120mm fan mounts on the PSU shroud that allow you to install fans directing the airflow directly to the graphics card. Four-slot graphics capability: For an advanced, high-performance computing setup, you can freely install a four-slot graphics card up to 360mm in length into the chassis. Optimized front panel for intensive air circulation: The optimized steel front panel provides powerful airflow in the system for maximum cooling. Tempered glass side panel: Show off your internal components in elegant style. All the storage you need: Holds up to 2 SSDs and 2 HDDs.
Internal 2x 3.5 "(transverse, hard drive cage), 2x 2.5", Front I / O 2x USB-A 3.0, 1x headphones, 1x microphone, PCI slots 4, Fan (front) 3x 120mm (optional) or 2x 140mm (optional), Fan (rear) 1x 120mm, Fan (top) 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm at the front, 120/140/240 / 280mm at the top, 120mm at the back, Mainboard up to µATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6"), Power supply ATX (max.160mm deep), PSU position below, CPU cooler max. 165mm height, Graphics cards max. 320mm, Color black, inside black, Lighting without lighting, Dimensions (WxHxD) 225x431x400mm, Volume 38.79l, Weight 6.20kg, Housing type minitower, Special features Cable management, dust filter, graphics card holder, viewing window made of glass, w/o psu, R-MACUBE110-BKNGM1N-G-1
Eleganter Midi-Tower für Gaming-PCs, mit Front aus Eichenholz, kompatibel mit E-ATX Mainboards, Seitenteil aus Mesh-Fläche, bis zu 7x 120-mm-Lüfter oder 8x 140-mm-Lüfter, bis zu 2x 3,5-Zoll oder 4x 2,5-Zoll-Laufwerke, I/O-Panel mit 1x USB 3.1 Typ C und 2x USB 3.0 Typ A
MAG PANO 100R PZ / WHITE - Supported ATX and Micro-ATX Back-connect motherboard. - Supports 360 mm radiator on the top, side and bottom - 270-degree panoramic tempered glass. - Pre-installed with 3 x 120 mm ARGB Reverse-blade fan at the side and 1 x 120 mm ARGB fan at the rear. - 1-to-4 ARGB-Fan control board. - Synergize with a compatible MSI motherboard through bridging with a USB 20Gbps Type-C (20Gbps) port for high speed data transmission. - Removable dust filter at the top, side and bottom being easily removed for cleaning. - UNI front panel cable make your DIY process easier and create more possibilities to your system.
Housings are our middle name. We've been on this topic for years and it's hard to impress us, but the sight of ENDORFY Arx 500 ARGB gives us goosebumps. It's out of pride - although some say it's because of the low temperature inside the housing. We have included our best solutions (including 4 Stratus 140 PWM ARGB). As a result, you get one of the largest (486×228×429 mm, i.e. slightly shorter than the Arx 700 series) ENDORFY cases - with room for a tall cooling system (up to 179 mm), 7 fans and most available graphics cards (up to 350 mm ). The outside is also great - with a tempered glass window and front and top panels that act as filters, our ENDORFY Arx 500 ARGB can become a housing master. Come get some fresh air! We all know that long hours at work and on the battlefield (yes, there is a difference) = welded components that beg for a break over time. With Arx 500 ARGB you don't have such actions - the casing helps keep them pleasantly cool even when you remove the components from the factory. This is due to the spacious interior, which can accommodate up to 7 fans. Additionally, the housing panels act as filters - so you don't need additional protection against dust. Compared to traditional solutions, this single layer allows for better air circulation and makes it easier to keep the components in a pleasant draft (because cooling is extremely important to us). Lord of the winds When you look inside the Arx 500 ARGB, you immediately see that there is a specific team of cooling fans working inside. We packed 4 Stratus 140 PWM ARGBs in it, created in cooperation with Synergy Cooling, so you can be sure of adequate airflow and low temperature. Because winter never surprises us. The Stratus 140 PWM ARGB is our favorite. It's 14 cm tall, has an optional semi-passive mode and a durable FDB bearing, so you can count on quiet and smooth operation even in extreme conditions. We also added a splitter to control the fan speed using a PWM signal from one motherboard connector. With such a package you are like a real ruler of the storms. Panels with filters If we were to talk about the best option in the Arx 500 ARGB, in our opinion, we would choose excellent ventilation. This is provided, among others, (right after great fans) by panels made of finely perforated sheet metal. Some people will probably say that they can be replaced with put-on filters, but the truth is that the double anti-dust layer limits the air flow like metal armor in LARPs. And no one likes to have welded... components. That's why we made sure that the panels (front and top) in our case act as filters. This single protective layer makes the inside of the case as cool as a winter morning, and you don't have to install additional dust protection. Additionally, you can remove each filter and clean it with a cloth or a vacuum cleaner (or rinse it under running water) and it will take you literally a moment. Mister of casings We've already said it, but we'll say it again if there's ever a Mr. Housing election, the Arx 500 ARGB has a chance to make it to the podium. All we need to do is turn on the ARGB-lit fans inside and the title is ours. The tempered glass side highlights them like a dream. Everything's all right! If someone asked us to describe the Arx 500 ARGB in three words, we would say: Everything is fine! It's literally one of our largest cases, so it easily fits everything that's most important to you. Of course we mean components. Arx 500 ARGB is 486×228×429 mm, so you can pack a lot inside, for example a tall cooling system (up to 179 mm), 7 fans (including 4 you get from us at the start) and most graphics cards available on the market (up to 350 mm). There will also be a large power supply, you can mount it in the position that is most convenient for you. Its installation is not a philosophy, because we have added, among other things, a dedicated mounting frame. Light in the housing Equipment without a backlight is ok, but it's nice to see a light in the housing sometimes. With Arx 500 ARGB you have the option of just one click (the RESET button on the top of the housing is responsible for control) and your components will be illuminated with a cosmic glow. Thank your ARGB fans for that. Thanks to 4 Stratus 140 PWM ARGB lights (we installed them in the housing for you), you can freely configure the backlight. You can set them up in just a moment thanks to the built-in PWM and ARGB controllers - everything is immediately connected into one working whole, compatible with ENDORFY products with the ARGB mark (and compatible products from other manufacturers), so you can easily synchronize the backlight of the entire set based on Arx 500 ARGB. Even if it's your first assembly ever.
