Compact dual-chamber midi tower, developed by Lian Li and PCMR, three sides with seamless tempered glass, alternative case lid for better cooling, supports 3x 360-mm radiators simultaneously, up to 11x 120-mm fans, 1x USB-C 3.1 and 2x USB-A 3.0 in the front panel
Compact gaming case, made of high-quality steel, for SFX PSUs and Mini-ITX/Micro-ATX motherboards (Intel and AMD), GPU up to 363 mm and 2x 2.5-inch drives.
This cable from Aquacomputer, is used for emergency shutdown of the computer in case of alarm. It is compatible with the Vision series and connects to the power button input of the main board without affecting the power button. Included in delivery: 1x cable (length 70cm) Compatible with the following devices: cuplex cryos NEXT with VISION VISION connection terminal for cryographics (23664, 23665, 23666, 23667) VISION Touch (53232, 53235) OCTO (53286) Note: Before connecting the cable, please make sure that the alarm output/tacho signal output of the corresponding device is configured correctly! Brief instructions: Settings for VISION devices (in aquasuite software): Tab "Alarm settings": Selection item "Power button (53216)" must be activated. Only then connect the alarm cable to the mainboard. Then check the correct function by provoking an alarm. If the PC does not switch off, turn the plug on the mainboard 180 degrees and repeat the test. During the emergency shutdown data can be lost because the operating system and open programs are not closed properly!
Tootja koduleht: http://www.asus.com/Motherboards-Components/Gaming-Cases/TUF-Gaming/TUF-Gaming-GT301/ Mõõtmed: 214 x 482 x 426 mm (L x K x S) Kaal: umbes 7,2 kg Materjal: teras (šassii, ees), karastatud klaas (külgpaneel), plastik (ees, sisend- / väljundpaneel) Värv: must Kujutegur: ATX, Micro-ATX, Mini-ITX Paigaldatud ventilaatorid: 3x 120 mm (ees, D-RGB-LEDid) 1x 120 mm (taga) Kokku võimalik paigaldada: 2x 140 / 3x 120 mm (ees) 2x 120 mm (peal) 1x 120 mm (taga) Radiaatori kinnitused (HDD ja / või ventilaatori pesade osaline loobumine): 1x max. 280/360 mm (ees) 1x max. 120 mm (taga) Filter: ees, üleval, toiteallikas (eemaldatav) Kettabaasid: 2x 3,5 tolli / 2,5 tolli (sisemine; lahti ühendatud) 4x 2,5 tolli (sisemine) Toiteallikas: 1x tavaline ATX (valikuline) Laienduspesad: 7 I/O paneel: 2x USB 3.0 tüüp A (USB 3.1 Gen1) 1x heli sisse / välja 1x RGB-LED juhtimine Graafikakaardi maksimaalne pikkus: 320 mm Maksimaalne protsessori jahuti kõrgus: 160 mm Toiteallika pikkus kuni: 160 mm Komplektis: 1x ASUS TUF GT301 korpus 4x 120 mm ventilaatorid (eelinstallitud) 25x kruvi põhiplaadi ja 2,5-tolliste draivide jaoks 8x kruvi 3,5-tolliste ajamite ja toiteallika jaoks 1x Phillipsi adapter vahetükkide jaoks 8x kaablikinnitust 2x kummikorgid graafikakaardi jaoks 1x hoidik kruvidega kõrvaklappide jaoks 3x takjakinnitusega kaablisidemed
Midi-Tower with blue embellishments on the front, supports motherboards up to ATX, side panels made of tempered glass, graphics card length up to 405 mm, radiators up to 360 mm, up to nine fans possible, four modes available
The EPDM tube from Alphacool's Enterprise Solutions series is characterised by its high resistance to acids, alkalis and external influences and has exceptional longevity compared to conventional PVC tubes. The matt black hose with its discreet velvet look will quickly become an eye-catcher in any water-cooled PC.What is the advantage of EPDM?Compared to commercially available PVC tubing, the EPDM tube from Alphacool is significantly more temperature resistant and enables working temperatures far above 100 °C. Even at higher water temperatures, the EPDM Tube remains dimensionally stable and prevents the hose from warping at points with tighter bending radii or connections. The risk of the water loop leaking or the water flow being obstructed is thus eliminated. The high resistance to external influences makes the Alphacool EPDM tube extremely durable and long-lasting.MountingThe Alphacool EPDM tube is slightly more dimensionally stable compared to a PVC tube. Nevertheless, it has an excellent pliability as well as flexibility for an effortless assembly even with tighter bending radii.FittingsThe EPDM tube can be used with all tube fittings (in the appropriate size) from the Alphacool Eiszapfen or HF series. Technical dataLength1mMaterial tubeEthylene propylene diene rubber (EPDM, without talc)Colormatt blackTube sizeØ outside 11 mm / Ø inside 8 mm (tolerances according to DIN ISO 33-02-1 E1)Hardness grade80° (± 5°) Shore AWorking temperature-35° C bis +120° CWarranty: 10 years???? Warranty Terms
The Akko Monsgeek Green Fog Switches are an ideal choice for anyone who prefers a smooth, linear typing feel with moderate actuation force. Developed for gaming enthusiasts and frequent typists, these switches offer precise response and pleasant haptics without audible clicking sounds. Linear switching behavior for quiet and consistent typing 60g actuation force for balanced feedback without fatigue MX-compatible stem for broad compatibility with keycaps 3-pin design for easy integration into hot-swappable keyboards Durable construction with up to 50 million keystrokes Optimized for a linear typing experience With their linear actuation, the Green Fog Switches provide an especially consistent typing experience without tactile feedback or click sounds. This makes them an ideal choice for quiet environments or users who prefer smooth operation. Stable MX stem & universal compatibility Thanks to the proven MX stem design, the switches can be combined with most common keycap sets. The 3-pin layout simplifies usage in hot-swappable keyboards and ensures a stable connection. Reliability for intensive use The durable construction and precise manufacturing allow for a lifespan of up to 50 million keystrokes. This makes the Green Fog Switches perfect for ambitious gamers and heavy typists who value durability.
InWin ModFree Deluxe Big Tower & NR36 ARGB AiO Water Cooling Bundle, modular high-end case with spectacular RGB cooling, ideal for high-performance buildsFully modular big tower case with four modules Spacious interior for GPUs up to 440 mm and radiators up to 420 mm Up to seven fans for optimal cooling performance InWin NR36 AiO water cooling with 360 mm radiator & copper plate Nebula ARGB lighting controllable via motherboard or controller High compatibility with Intel & AMD sockets as well as E-ATX motherboards Maximum modularity meets impressive cooling performance With the InWin ModFree Deluxe + NR36 Bundle, you get an especially flexible and powerful case setup for your system. The fully modular big tower case is equipped with four interchangeable modules and can be individually expanded or rebuilt – ideal for ambitious builds with lots of hardware. Spacious interior for high-end hardware The interior offers you plenty of space for graphics cards up to 440 mm in length and CPU coolers up to 200 mm in height. You can install motherboards up to E-ATX and accommodate up to four drives. The power supply also has ample room – up to 390 mm long, or shorter if needed with the HDD tray. Optimal cooling with fans and radiators Up to seven fans can be installed in the case – three at the front, three on the top, and one at the rear. Alternatively, you can install two large radiators up to 420 mm to cool your components with water. Powerful AiO water cooling with ARGB highlights The included NR36 ARGB all-in-one water cooler from InWin impresses with a 360 mm radiator, powerful pump, and a large copper plate for excellent heat conductivity. Three quiet 120 mm fans with PWM and ARGB control ensure high airflow and top performance at minimal noise levels. Visual highlights & perfect control A special highlight is the Nebula lighting effect on the pump cover, shimmering like a starfield. The ARGB lighting of the pump and fans can be customised either via motherboard software or the included controller. This lets you perfectly match your setup visually to the rest of your system. Everything under control – maximum connectivity The case’s I/O panel offers 1x USB-C (20 Gbit/s), 2x USB-A, and 1x audio/microphone jack. This gives you all the important ports right at hand – ideal for fast data transfers or connecting your headset.
Cabinet Form Factor: Midi Torn Mainboard Form Factor13.5-inch Internal Drivesahtleid: 2 2.5-inch Internal Drivesahtleid1Audio Line-Out: 1Lisatarvikud: RGB LED Strip Chassis Features15 mm Nominal kaal: 6.78 kg garantii Products Returnable1Box kaal Brutto (kg): 8.04 kg Retail Packaging Netokaal Carton1kg Retail Packaging Netokaal Plastic: 0.05 kg Packs in Box1
Tootjakoduleht: http://www.msi.com/PC-case/MPG-GUNGNIR-110R Mõõtmed: 215 (W) x 430 (D) x 450 (H) mm Materjal ja kaal: 7.9Kg Kujutegur: ATX / M-ATX / Mini ITX Kettaraamid: 2.5’ SSD x 2 + 3.5” with 2.5” combo tray x 2 I / O-paneel: USB 3.2 Gen 1 Type A x 2 USB 3.2 Gen 2 Type C x1 Audio x1 Mic x1 GPU maksimaalne pikkus: 340mm Maksimaalne protsessori jahuti kõrgus: 170mm Maksimaalne PSU pikkus: 250mm Ventilaatorite tugi: Taga - 1 x 140mm/120mm Ees - 2 x 140mm/ 3 x 120mm Üleval - 2 x 140mm/ 3 x 120mm Radiaatori kinnitus: Taga - 120mm Ees - 120, 140, 240, 280, 360 mm Üleval - 120 / 240mm Kaasas: Taga - 120mm ARGB Fan x1 Ees - 120mm ARGB Fan x 3
The LC Power Gaming 900W Lumaxx Light is a mid-tower chassis designed to provide space for gaming setups. With a meshed front panel for airflow and cooling, this tower features a tempered-glass side panel to showcase internal components. The removable HDD rack allows for storage management, while the dust filter helps keep the interior clean from debris.
Kompaktes System für Micro-ATX und Mini-ATX Mainboards, perforierte Front für guten Airflow, Seitenteil aus Tempered Glass, Grafikkarten bis 297 mm, CPU-Kühler bis 158 mm
Stylischer Midi-Tower in Schwarz, Front mit RGB-Beleuchtung, inkl. 4x 120-mm-ARGB-Lüfter, Temperglas-Seitenteil, mit Netzteilabdeckung, Grafikkarten bis 317 mm und CPU-Kühler bis 157 mm
Stylischer Midi-Tower in Schwarz, Front mit RGB-Beleuchtung, inkl. 4x 120-mm-FRGB-Lüfter, Temperglas-Seitenteil, mit Netzteilabdeckung, Grafikkarten bis 317 mm und CPU-Kühler bis 157 mm
Stylischer Midi-Tower in Schwarz, Front mit RGB-Beleuchtung, inkl. 1x 120-mm-Lüfter, Temperglas-Seitenteil, mit Netzteilabdeckung, Grafikkarten bis 317 mm und CPU-Kühler bis 157 mm
The Raspberry Pi NoIR Camera Module v2 is a high quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It's capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video. It attaches to Pi by way of one of the small sockets on the board upper surface and uses the dedicated CSi interface, designed especially for interfacing to cameras. 8 megapixel native resolution sensor-capable of 3280 x 2464 pixel static imagesSupports 1080p30, 720p60 and 640x480p90 video Camera is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system The board itself is tiny, at around 25mm x 23mm x 9mm. It also weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. It connects to Raspberry Pi by way of a short ribbon cable. The high quality Sony sensor itself has a native resolution of 8 megapixel, and has a fixed focus lens on-board. In terms of still images, the camera is capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video. The NoIR Camera has No InfraRed (NoIR) filter on the lens which makes it perfect for doing Infrared photography and taking pictures in low light (twilight) environments. Applications Infrared photography Low light photography Monitoring plant growt
