Schwarze Monitorhalterung von Arctic, für einen 13 - 32 Zoll Monitor (max. 8 kg), VESA 75 x 75 mm / VESA 100 x 100 mm, Höhenverstellbar / Neigbar / Pivot
Tootja: LogiLink Tootegrupp: USB | FW | eSATA | LAN | WLAN case / stadion Case / docking station liides: SATA seadme suurus: 2.5 tolli seadme liidesed: M.2 NGFF toetatud seadmed: M.2 SSD toiteplokk: USB 3.1 kaabel laius: 106 mm kõrgus: 41 mm sügavus: 12 mm Lisaandmed: Compliant koos USB3.1 Gen2 spetsifikatsioon, data transfer rate Kuni 10 Gbps, Compliant koos PCI Express M.2 spetsifikatsioon 1.0, Backward ühildub USB3.0/2.0/1.1 devices, ühildub B+M Key M.2 NGFF (SATA) SSD 2230 / 2242 / 2260 / 2280 mm, Can be a primary bootable device containing the O/S, (depends on the M.2 SSD ja motherboard BIOS), tugi Windows, MAC OS ja Android (with OTG function), Dimension Lisainfo: andmeleht
RaidSonic USB | FW | eSATA | LAN | WLAN case / stadion Case / docking station liides: USB 3.1 Type-C seadme suurus: 12.5 mm seadme liidesed: M.2 NVMe toetatud seadmed: SSD toiteplokk: Bus powered laius: 40 mm kõrgus: 15 mm sügavus: 105 mm Netokaal: 0.1 kg
Improve the airflow inside your chassis with the Genesis Oxal 120 3-Pack. These powerful fans, also known from the Genesis Irid 505 V2, 503 V2, and 505F, are specifically designed for cases with dense filters, providing significantly better performance than standard solutions. Looking for strong performance as well as low levels of noise? You can rely on it thanks to the fan's high performance, even at low revs, and the reinforced bearing (up to 50,000 hours). And that's not all. EQUIP YOUR CASE WITH GENESIS OXAL 120 3-PACKIntroducing the Genesis Oxal 120 3-Pack - the fans that has been featured in our most efficiently designed product, the Genesis Irid 505F case, placing it at the forefront of the best-ventilated PC cases in journalistic tests. Their high performance is the result of combining a 120 mm diameter with a maximum rotational speed of 1300 RPM, along with high static pressure. This ensures adequate airflow in PC cases that have both standard and thickened filters, which have the primary function of limiting the amount of dust entering the interior. Achieving efficient component cooling has never been easier. HIGH PERFORMANCE EVEN AT LOW REVSThe Genesis Oxal 120 is a low-speed fan, which means that you get standard fan performance comparable to that of a 1400 RPM fan at a much lower RPM. If you're looking for a balance between performance and silence, you can achieve it by adjusting the speed of the Genesis Oxal 120 to a maximum of 80%. Using the maximum revolutions (up to 100%) is recommended for demanding situations, such as overclocked components at the time of their full load. SIMPLE INSTALLATIONThe Genesis Oxal 120 3-Pack are equipped with a 3-pin connector with both male and female plugs. This allows you to connect the fan directly to the motherboard and use it to control the rotational speed based on the current temperature of the processor. But that's not all - the double plug design makes it easy to connect multiple fans together and plug them into a single fan header, making it easier to organize the inside of a PC case.
Premium USB-C USB-C data and charging extension AXAGON BUCM32-CF15AB SPEED+ EXTENSIONS USB 3.2 Gen 2 cable with USB-C male and USB-C female connectors. The cable is designed for very fast data transfers and notebook, phone, tablet and other mobile device charging. Enables high-speed extensions for devices with short cables, such as multiport hubs and port replicators. You will not be limited by space and the location of ports on the laptop. The cable supports up to 20 Gb/s data transfer and also allows image transfer up to 8K/60Hz Full Ultra HD resolution and audio. The cable is compatible with charging technologies Power Delivery up to 240W (depends on the extension cable), Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Connected devices can be charged with up to 5A current. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The nylon braid gives the cable ultimate strength. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 32AWG together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-C (F) female Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB 10 Gbps - USB 3.2 Gen 2, compatible also with SuperSpeed USB 20 Gbps - USB 3.2 Gen 2x2. Backward compatible with USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports 20 / 10 Gb/s (SuperSpeed+) second generation transmission rates. Supports 20.000 / 10.000 / 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ dual-lane / SuperSpeed+ / SuperSpeed / High / Full / Low speed) transmission rates. Video up to 8K@60Hz Full Ultra HD resolution and audio transfer support - USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or Thunderbolt 3/4 port is required. Supported charging technologies: Power Delivery 2.0 / 3.0 / 3.1 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Support for fast charging with a current of up to 5A. Cable includes power wires 22AWG, data wires 32AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and tinned copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable as a cable extension for laptops, tablets, mobile phones and other devices with USB-C connector especially for multiport hubs, port replicators and docking stations. The maximum extension length (cable + extension cable) is 2 m. Other data: cable length 1.5 m, outer diameter of the cable 5.0 mm. Package contains: USB-C M USB-C F black cable, packed in a printed and sealed foil package with hanging hole.
Aluminium external AXAGON EEM2-SBC RAW box with USB 3.2 Gen 2 interface is designed for SATA M.2 SSD disks. The double-sided USB-C connector on the box together with the supplied USB-C -> USB-A cable enables a reliable connection to a computer. SATA 6G interface allows you to enjoy the speed of modern M.2 SSD drives. The transmission rate amounts to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern functions, e.g. UASP, TRIM and allows reading S.M.A.R.T. information that monitors the status of the disk. Standby support when idle. SATA M.2 SSD drives can be used in the external box. The advantage is the attachment of three different lengths of SSD cards - 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Screwless box opening facilitates assembly and disassembly of the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in black colour with an elegant brushed finish that prevents unwanted fingerprints. The rounded box design promises pleasant use. The aluminum box body provides very good cooling of the inserted M.2 SSD disk. By inserting the M.2 SSD in the box, you will easily create fast compact external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps. Speed up to 10 Gbit/s. Connection via reversible USB type C female connector. Device support: SATA M.2 SSD disks, designed for B+M key and B key card formats, NGFF 75-pin B key slot for SATA M.2 drives. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports transmission rates 10.000 / 5.000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Support of B+M key or B key SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the box is determined by used disk speed (theoretically up to 650 MB/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - Drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body with cooling holes helps to cool the M.2 SSD disk. Connection via USB 3.2 Gen 2 type C female connector. USB Type C male / USB Type A male cable 20 cm long is included. Other data: External box dimensions 94 x 41 x 10 mm. External box weight 36 g (without USB cable and M.2 SSD disk). Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher, Android (OS and device support required). Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed. Package contains: USB-C 3.2 Gen 2 external box for SATA M.2 SSD, USB type C - type A cable, 20 cm long, mounting material, multilanguage quick guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
The NewStar desk mount FPMA-D700D3 allows you to attach 3 LCD/TFT screens up to 27" on a desk. With this mount you can easily swivel, tilt and rotate the monitor. The desk mount can hold screens up to 8 kg each and is mounted on a desk using a deskclamp. This model is suited for all LCD/TFT screens with a VESA 75x75 or 100x100 mm hole pattern. If the hole pattern on the back of your screen is different, please contact us for the opportunities. By using an ergonomic monitorarm you prevent neck- and back complaints. Ideal for use in offices and on counters or receptions.
Original part number NKZ-0448 Product name Natec RHINO External USB 3.0 enclosure for 3.5" SATA HDDs, black aluminum Producer Natec Class of product USB | FW | eSATA | LAN | WLAN case / stadion Case / docking station interface USB 3.0 Device size 3.5 inches Device interface SATA Supported devices Hard disk Supported operation systems Windows 2000/XP/Vista/7/8 Power supply AC Adapter Width 187 mm Height 31.5 mm Depth 117 mm Net weight 660 g Additional information aluminum case provides very good heat dissipation and drive protectionoption of setting case up horizontally or standing it verticallyhigh data transfer speed (up to 5 Gbps)suitable for most 3.5" SATA hard drivesUSB cable lenght: 60 cmpowered by AC Adapter (included)
Tootja: Natec Tootegrupp: USB | FW | eSATA | LAN | WLAN case / stadion Case / docking station liides: USB 3.0 seadme suurus: 2.5 tolli seadme liidesed: SATA III toetatud seadmed: Hard disk, SSD toiteplokk: USB laius: 78 mm kõrgus: 12.3 mm sügavus: 130 mm
Premium USB-C USB-C data and charging extension AXAGON BUCM32-CF10AB SPEED+ EXTENSIONS USB 3.2 Gen 2 cable with USB-C male and USB-C female connectors. The cable is designed for very fast data transfers and notebook, phone, tablet and other mobile device charging. Enables high-speed extensions for devices with short cables, such as multiport hubs and port replicators. You will not be limited by space and the location of ports on the laptop. The cable supports up to 20 Gb/s data transfer and also allows image transfer up to 8K/60Hz Full Ultra HD resolution and audio. The cable is compatible with charging technologies Power Delivery up to 240W (depends on the extension cable), Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Connected devices can be charged with up to 5A current. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The nylon braid gives the cable ultimate strength. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 32AWG together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-C (F) female Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB 10 Gbps - USB 3.2 Gen 2, compatible also with SuperSpeed USB 20 Gbps - USB 3.2 Gen 2x2. Backward compatible with USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports 20 / 10 Gb/s (SuperSpeed+) second generation transmission rates. Supports 20.000 / 10.000 / 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ dual-lane / SuperSpeed+ / SuperSpeed / High / Full / Low speed) transmission rates. Video up to 8K@60Hz Full Ultra HD resolution and audio transfer support - USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or Thunderbolt 3/4 port is required. Supported charging technologies: Power Delivery 2.0 / 3.0 / 3.1 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Support for fast charging with a current of up to 5A. Cable includes power wires 22AWG, data wires 32AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and tinned copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable as a cable extension for laptops, tablets, mobile phones and other devices with USB-C connector especially for multiport hubs, port replicators and docking stations. The maximum extension length (cable + extension cable) is 2 m. Other data: cable length 1 m, outer diameter of the cable 5.0 mm. Package contains: USB-C M USB-C F black cable, packed in a printed and sealed foil package with hanging hole.
Premium connection USB-C USB-C Data and Charging AXAGON BUCM2-CM25AB CHARGE cable with USB-C male connectors at both ends. The cable is designed especially for charging and powering computers, monitors, laptops, phones, tablets and other devices. It also supports data transfer speeds of up to 480 Mb/s. The cable has implemented the latest specification of Power Delivery 3.1 charging technology. This technology delivers, among other things, a power output of 240W which is more than double that of Power delivery 3.0, which delivers 100W. You can use not only the (Standard Power Range SPR) for voltages of 5, 9, 15 and 20V with a current of 5A, but also sufficient power in fixed voltages of 28, 36 and 48V with a maximum current of 5A (Extended Power Range - EPR). Thanks to the new PD 3.1 technology, you can also use the cable to power devices with much more power, such as gaming laptops, 4K monitors, power tools or the increasingly popular e-scooters. To identify the cable and its current capabilities, the cable has an integrated E-Mark chip. The cable is also compatible with Quick Charge, PPS, Samsung AFC and SFC, Apple, SMART and other charging technologies. Durable, extended-life bidirectional cable features metal terminals, nickel-plated connectors and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: 2x USB-C (M) male. Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the connected device. USB 480Mbps (USB 2.0), compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s transmission rates. Supported charging technologies: Power Delivery 2.0/3.0/3.1 - 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, PPS, Samsung Adaptive Fast Charging and Super Fast Charging, Huawei Fast Charge Protocol, Apple Fast Charging, SMART Charging and others. Support Extended Power Range (EPR) specification up to 240W and Standard Power Range (SPR) specification up to 100W. Support for fast charging with a current of up to 5A. Integrated E-MARK chip. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for computers, laptops, mobile phones, tablets, power banks, power tools and other devices with USB-C connector. Other data: cable length 2.5 m, 4.6 mm outer diameter of the cable. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.
This NewStar CPU mount, model CPU-D200SILVER, allows you to mount a computer under a desk. A CPU mount creates a need and clean desk because its stored under the desk and doesn’t use any valuable desk space. Increase the lifetime of your CPU due to reduction intake dust and dirt from floors. Keep the workplace clean without computers on the floor. This NewStar CPU mount allows vertical installation of computers. Hide your cables and keep the workplace nice and tidy. Easy to adjust in width and depth to fit most desktop and tower PCs. The specifications listed show maximum and minimum width and depth of the mount. All installation material is included with the product. Max. weight: 30 kg Width: 13-23 cm Height: 39-54 cm Silver
FL50-525BL1 Neomounts by Newstar floor stand Neomounts by Newstar FL50-525BL1 mobile floor stand for 55-86" screens - Black The Neomounts by Newstar FL50-525BL1 Move Go is a mobile floor stand for flat screens up to 86" with a maximum weight capacity of 76 kg. Due to the sturdy design and the included touch screen stabilizers, the Move Go is a perfect solution for touch screens. The floor stand is manually adjustable in 4 preset height positions, ranging from 106 to 136 cm. The Neomounts Move Go is packed partially pre-assembled and installation can be done within just minutes. The trolley features practical handles and four solid 7,5 cm double locking caster wheels that allow you to move and use the floor stand wherever you like. Due to the large caster wheels, thresholds or carpets are no challenge to the FL50-525BL1. A multimedia shelf (front and back mountable) with a maximum weight capacity of 10 kg and an AV hardware rack is included and optional for installation. The screen on the trolley can be secured by locking the brackets using a padlock (not included).
Original part number NKZ-0275 Product name HDD enclosure Natec Rhino for 2.5" SATA - USB2, Aluminum Producer Natec Class of product USB | FW | eSATA | LAN | WLAN case / stadion Case / docking station interface USB 2.0 Device size 2.5 inches Device interface SATA Supported devices Hard disk Supported operation systems Windows 98/98SE/ME/2000/XP/Vista/7 Power supply USB Width 132.5 mm Height 12.5 mm Depth 78 mm Additional information compact size and low profilecase made of brushed aluminumgood HDD protection, heat dissipation by aluminum caseLED power indicatorhigh transfer speed (up to 480Mbps)compatible with most of 2.5" HDDplug&play, velvet case included
The super speed hub from LogiLink supports the latest USB 3.0 standard with up to 5 Gbps data throughput and extends your USB port with additional 4 ports. It supports also older USB device generations.Portide hulk4Jaoturi liidesedUSB 3.0 (3.1 Gen 1) Type-AUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk4Andmeedastuskiirus5000 Mbit/sIsehäälestuvJahSisendpinge230Väljundvool3,5 AToote värvHall
Slim metal USB 3.2 Gen 1 (USB 3.0) multi-port hub AXAGON HMA-GL3A connects up to three USB devices to laptop or computer and also adds Gigabit network card which connects your computer to high speed network. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This compact multiport hub also handles the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface is transfer speed up to 5Gb/s. The Gigabit network adapter expands the computer with a fast and stable network connection, adds the missing RJ-45 network connector or adds another network card. The LAN adapter is compatible with 10/100/1000 Mbit/s speed and also offers a wide range of features, such as IPv4/IPv6 checksum to reduce CPU load by checksums, the crossover detection and auto-correction, support for various modes of the Wake-on-LAN feature, the work with virtual LAN (VLAN) and advanced Power Management features. In modern operating systems from Windows 8.1 above, the adapter allows easy automatic installation without the need for an Internet connection. The port replicator is the ideal accessory for ultrabooks with a small number of USB-A ports and without network card. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Some phones and tablets with the Android operating system, such as the Samsung S9+, can be connected to the Internet with a network Ethernet cable with suitable adapter* thanks to this hub. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 20 cm long cable. USB Outputs: 3x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. RJ-45 Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mbit/s auto-detection. Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminates the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN feature support in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection and Link Change Wake-up. Supports ECMA-393 proxZzzy standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers. RealWoW! technology support allows remote wake up over the Internet. Advanced Power Management features:The adapter supports advanced power management to reduce losses during standby or light traffic on the network. It further supports advanced power saving when the Ethernet cable has been disconnected. Supports Advanced Configuration Power Management Interface (ACPI). Supports Power Management offload (ARP & NS). Supports Microsoft Always On Always Connected (AOAC). Supports Intel Converged Platform Power Management (CPPM). Supports Link Power Management (LPM). Supports Operating System-directed Power Management (OSPM). Supports IEEE 802.3az EEE (Energy Efficient Ethernet). Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Power supply via USB bus (USB bus power). Dimensions 90 x 23 x 13 mm. Weight 38 g (incl. cable). USB cable length 20 cm. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions (WARNING - check with the Android device manufacturer if the Ethernet connection is supported). Package contains: SuperSpeed USB multi port hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Original part number PP6U-1M Product name Gembird patchcord RJ45, cat.6, UTP, 1m, gray Producer Gembird Class of product Patchcord network cable Wiring type UTP - unschielded twisted pair cable, 4 pairs Length 1 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type RJ45 Plug 2 type RJ45 Cross-Over No Boot non-snag-proof Colour Grey
