Type HDTV/Megapixel/Outdoor | Pixel Resolution 6 Mega Pixel | Focal Length 2.7 mm-13.5 mm | IR Illumination | Sensor size 1/2.7" CMOS | Microphone Built-in | Min. Illumination 0.0007 Lux | Effective pixels 3288 (H) 1850 (V) | Electronic Shutter Speed Auto/Manual 1/3 s-1/100,000 s | Supports card capacities up to 256GB | Power supply requirements 12 VDC/PoE | Environment Outdoor | Operating temperature range -30 C to +60 C | Colour White | Dimensions 108.3 mm F122.0 mm
Type Fixed Dome/HDTV/Megapixel/Outdoor | Pixel Resolution 5 Mega Pixel | Focal Length 4mm | IR Illumination | Sensor size 1/2.8" CMOS | Effective pixels 2880 (H) 1620 (V) | Electronic Shutter Speed 1/25 s-1/100,000 s | Supports card capacities up to 256GB | Power supply requirements 12 VDC, 1 A 10% | Environment Outdoor | Operating temperature range -30 C to +55 C | Included Accessories Power Adapter | Colour White | Dimensions 140.5 mm F111.0 mm
Alarm Box Input/Output module for Dahua NVR/XVR > Support through RS485 access to NVR&XVR > Support 16ch Alarm In/ 6ch Alarm Out interface > Support universal 12V power supply > Linked alarm can be configured on the alarm input and output interface when the communication is established between XVR/NVR device and the alarm box.
Carbon monoxide sensor KID-2030DCR2030-DCR carbon monoxide sensor equipped with a KIDDE electrochemical sensor, guaranteeing up to 10 years of operation. Battery power supply allows the detector to be installed in an optimal place in the room and also provides protection in the event of a power supply disappearance on the network. Exceeding the permissible level, which is signaled optically (red LED) and acoustically (loud, pulsating sound alarm with a power of 85DB). The device's memory saves information about detection of a concentration of which exceeding the level of 100 ppm. Thanks to this, the user can make sure that during his absence in the room there was no carbon monoxide emission. The sensor has a test / reset button to check the operation of the device and reset the alarm signaling. The efficiency control system monitors on an ongoing basis, among others: sensor, internal circuits and battery condition. In the case of incorrect operation or low battery charge, the yellow LED light flashes and the warning sound signal is turned on. In addition, the sensor has been equipped with a function that allows you to quickly check the correct sensor response to the CO test gas. Thanks to a specially designed housing, in addition to mounting on the wall, the sensor can also be placed on a flat surface, e.g. on a bedside table near the bed. 10 years after activating the power supply, the sensor will remind you of the need to replace the device. 2030-DCR is marked with a construction mark B confirming the fulfillment of the requirements of the Polish standard PN-EN 50291-1: 2018+AC: 2021 for homemade carbon monoxide detectors. The research was carried out by the Scientific and Fire Protection Center-State Research Institute Józef Tuliszkowski (CNBOP-PIB). In addition, it has a certificate confirming the fulfillment of the requirements of the BS EN 50291-1: 2018 standard issued by the independent research single Tüv Rheinland.
Type HDTV/Megapixel | Pixel Resolution 6 Mega Pixel | Focal Length 1.68 mm | IR Illumination | Sensor size 1/2.5" CMOS | Microphone Built-in | Lens Mount M12 | Min. Illumination 0.0006 Lux | Effective pixels 2560 (H) 2560 (V) | Electronic Shutter Speed Auto/Manual 1/3 s-1/100,000 s | 1xAudio-In | 1xAudio-Out | 1xRJ45 | 1xAlarm In | 1xAlarm Out | Supports card capacities up to 512GB | Power options PoE | Power supply requirements 12 VDC, 1 A; PoE (802.3af) | Environment Outdoor | Operating temperature range -30 C to +60 C | Colour White | Dimensions F122 mm 53.3 mm
Type Fixed/HDTV/Megapixel | Pixel Resolution 6 Mega Pixel | Focal Length 2.8 mm; 3.6 mm | IR Illumination | Sensor size 1/2.7" CMOS | Microphone Built-in | Lens Mount M12 | Min. Illumination 0.0007 Lux | Effective pixels 3288 (H) 1850 (V) | Electronic Shutter Speed Auto/Manual 1/3 s-1/100,000 s | 1xRJ45 | Supports card capacities up to 256GB | Power options PoE | Power supply requirements 12 VDC; PoE | Environment Outdoor | Operating temperature range -40 C to +60 C | Colour White | Dimensions 81.0 mm F109.9 mm
Siren 6. Your home’s smart indoor siren. You can use Z-Wave to make your home smarter. You can use Z-Wave to make your home more secure. And you can use Siren 6 to make your home smarter, safer, and more secure. Siren 6 for security. Whether it’s remotely monitored or self-monitored, Siren 6 is the perfect indoor siren for a Z-Wave security system. In the event of an intrusion or break-in being detected by an number of Z-Wave sensors, it can sound any one of up to 15 pre-configured tones at an ear-splitting 110 decibels. Siren 6 for safety. Enhanced with Z-Wave, Siren 6 isn’t just a part of your home’s security system, but also a part of your home’s safety system. In the event of an emergency, or something you need to be notified of, Siren 6 can be used as an extra speaker for other connected-devices including Z-Wave smoke and leak detectors. Siren 6 for more. Siren 6 really is Z-Wave’s most connected alert system. Easy to set up as a siren, it’s just as easy to convert it to a doorbell. Paired with an optional accessory, Button, Siren 6 will offer the same functionality as Aeotec’s Z-Wave doorbell, Doorbell 6.
