DJI RC Pro. With enhanced performance and powerful O3+ video transmission technology built-in, DJI RC Pro is ideal for professional aerial photography. Thanks to the next-generation processor and increased storage capacity, the DJI RC Pro system runs more stably and smoothly. DJI RC Pro adopts the same control sticks as DJI FPV to provide a smooth control experience. Up your game now with DJI RC Pro.
ND filter set for DJI Air 3S (ND8/32/128)Gain full control over your shutter speed and create spectacular shots even in the most challenging lighting conditions. ND8, ND32 and ND128 filters allow you to fine-tune the amount of light reaching the lens, so you can use lower shutter speeds and get perfectly smooth, cinematic shots. Whether you're filming in bright sunlight or high-contrast conditions, these filters eliminate the risk of overexposure, ensuring perfect exposure and complete control over every frame.Lightweight design and perfect fitEach filter weighs just 2.84 grams, which minimizes additional weight on the drone and does not affect its stability in flight. The filters are precisely matched to the DJI Air 3S cameras, both the wide-angle camera (17.15 × 14.53 mm) and the medium telephoto camera (15.08 × 13.25 mm). With this design, you'll get crystal clear shots without optical distortion.IncludedND8 filterND32 filterND128 filter ManufacturerDJIManufacturer codeCP.MA.00000834.01Size of light transmission area:15.08×13.25 mm (medium telephoto camera); 17.15×14.53 mm (wide angle camera).Weight (single filter):2.84 gCompatibilityDJI Air 3S
Dieses Kit enthält einen Akkuabdeckung-Zubehörschuhadapter und einen Schnellverschluss-Zubehörschuhadapter, die beide mit Zubehör wie Leuchten und Mikrofonen kompatibel sind, die über einen Zubehörschuhanschluss verfügen.
DJI Video ReceiverThe DJI Video Receiver is compatible with the DJI Video Transmitter and is ideal for use on film sets. If you use it in conjunction with a film camera such as ARRI or RED, you can conveniently transmit metadata and output video signals with a fractional number of frames per second. The device supports the O3 Pro system, allowing for 1080p/60FPS image transmission up to 4 km. In addition, you can connect an unlimited number of receivers to your transmitter (in Broadcast mode). DJI Video Receiver is also compatible with DJI Master Wheels. Note: DJI Video Transmitter is required to use the DJI Video Receiver.Almost Unlimited PossibilitiesThe receiver supports metadata transmission via SDI, which means you can conveniently transmit file names, time codes, camera settings to monitors and QTAKE. The DJI Video Receiver also allows for real-time voice calls (one-on-one), facilitating communication between the operator and director. The device also offers 2 modes of operation. Broadcast mode allows you to connect an unlimited number of receivers to your transmitter, allowing multiple teams to efficiently monitor work on the film set. Control mode, on the other hand, is suitable for remote control of Ronin 2, DJI RS 3 Pro, and camera focus.In the boxDJI Video ReceiverNP-F battery adapterWB37 battery adapterRonin x2 video transmission antennaUSB-C cableSDI cableDC power cable to P-TAPMounting kitWeightApprox. 350 g (without antennas)Dimensions127 x 87 x 26 mm (L x W x H, without antennas)Working FrequencyTransmission Band Non-DFS Transmission Band: 2,4000-2,4835 GHz; 5,150-5,250 GHz; 5,725-5,850 GHz; DFS Transmission Band: 5,250-5,350 GHz; 5,470-5,725 GHz; 5,725-5,850 GHz;*In some countries and regions, the 5.1/5.2/5.8 GHz frequencies are prohibited or the 5.1/5.2 GHz frequencies are only allowed for indoor use. For more information, please check the local regulations. Frequencies 5,600-5,650 GHz are not used.Transmitter Power (EIRP)2,4000-2,4835 GHz: < 33 dBm (FCC); < 20 dBm (SRRC / CE / MIC); 5,725-5,850 GHz: < 33 dBm (FCC); < 14 dBm (CE); < 23 dBm (SRRC);Max. Transmission Bandwidth40 MHzMax. Bitrate40 MbpsPower Consumption9 WSupply Voltage6-18 VOutput VoltagePower output port: 6-18 VOperating TimeApprox. 3 h 50 min *Tested at room temperature of 25°C when powered by the intelligent WB37 battery and connected to the DJI Video Transmitter.Video Format (Output)With DJI Video Transmitter: 1080p: 23.98/24/25/29.97/30/50/59.94/60FPS; 720p: 50/59.94/60FPS; With Ronin 4D: 1080p: 24/25/30/48/50/60FPS;Audio Format (Input)Built-in SDI interface, built-in HDMI interfaceAudio Format (Output)PCMVideo Transmission SystemO3 ProVideo Transmission Delay70 ms *Measured while recording 1080p/60FPS video.Video CodecsH.264Max. Transmission Range6 m (FCC); 4 km (CE / SRRC / MIC); *Measured in an open environment without obstacles and interference.Operating TemperatureFrom -10°C to 45°C
Akukäepide DJI RS 3 stabilisaatorile; Aku kestab kuni 12 tundi järjest; Toetab 18 W kiirlaadimist; Laeb täis 2,5 tunniga; Lihtne kinnitada ja eemaldada
Kasutage välise GPS-mooduli jaoks mõeldud DJI R-adapterikaablit, et ühendada väline Ronin-S GPS-moodul DJI RS 2-ga.; See parandab stabiliseerimisjõudlust kiirel kiirendamisel ja hoiab kaamera otse.
Ersatz-Kameramodul mit Koaxialkabel (Länge 130 mm) für DJI O4 Air Unit Pro, inkl. 4x M2 Schrauben; Abmessungen (LxBxH): 25,55 x 20 x 23,30 mm, Gewicht (einschließlich Koaxialkabel): ca. 16,4 g
für Osmo Action 5 Pro und Osmo Action 4, Kapazität: 4900 mAh, Abmessungen: 32 × 38 × 181 mm (L × B × H), Gewicht: 199 g, Spannung: 3,6 V, USB-Eingang: 3,6 V, USB-Ausgang: 5 V/1,5 A, Betriebstemperatur: -20 °C bis +45 °C, ...
When paired with DJI Neo/DJI Avata 2 and DJI RC Motion 3, [1] DJI Goggles N3 lets you soar through the skies and enjoy an immersive flight experience, as if you were in the pilot seat. Activate the head tracking function to control Neo/Avata 2 with head or wrist movements, achieving seamless synergy.
DJI Mic 3 on täiustatud miniatuurne juhtmevaba mikrofonikomplekt, mis sisaldab ühte saatjat (TX) ja ühte vastuvõtjat (RX). See pakub kristallselget heli, stabiilset ühendust ja kompaktset disaini, sobides ideaalselt nii videosalvestusteks, intervjuudeks kui ka otseülekanneteks. Mudel: DJI Mic 3 (1 TX + 1 RX) Tüüp: Juhtmevaba mikrofon Saatja mõõdud: 28.77 × 28.34 × 16.35 mm Vastuvõtja mõõdud: 53.85 × 28.69 × 22.00 mm Kaal: 0.016 kg Funktsioonid: Kõrge helikvaliteet, kompaktne ja kerge, lihtne kasutada Kasutus: Sobib video- ja helisalvestusteks, intervjuudeks, sisu loomiseks ja otseülekanneteks
Zenmuse S1 is DJI's first spotlight designed for multi-payload drone platforms. Utilizing the LEP technology, it offers high brightness and long illumination distance, and supports multiple lighting modes. This makes it ideal for public safety, emergency rescue, inspection, and other nighttime operations.
Kaabliadapter DJI Focus Pro LiDAR-i ja DJI Video Transmitteri samaaegseks kasutamiseks DJI RS 4 Pro ja teiste seadmete kaudu, sh USB-C kahe stabilisaatoriga toitekaabel
Juhtmevaba saatja koos sisseehitatud mikrofoniga; Ühildub DJI Mic Mini mikrofonisüsteemiga; Kristallselge helisalvestus kahetasemelise mürasummutusega; Ülimalt kompaktne ja kerge disain, tööraadius kuni 400 m; Aku kestab kuni 11,5 ...
Laadimisalus kahele saatjale ja ühele vastuvõtjale, lisaks tuulekaitse, magnet või magnetklamber ja audioadapteri kaabel, liitiumioonaku 1950 mAh, 755 WH, 3,87 V, max. 5 V, 1,5–2 A, laadimisaeg umbes 1,5 tundi, mõõtmed 106,30 x ...
