LogiLink's outdoor patch cords are specifically designed for use in unprotected, harsh environments, but not for underground applications. The cable sheath made of resistant polyurethane (PE) protects against weathering and UV radiation. The cables are still flexible and easy to lay.
Tootja: LogiLink Tootegrupp: kaablid - USB | FireWire | PS/2 | (e)SATA | ATA USB plugs: 1 x Male USB-C, 1 x Male USB-A kaabli pikkus: 0.5 m kullatud pistikud: Ei kaabli värvus: valge Lisaandmed: Connection 1 Lisainfo: andmeleht
Der iOpener ist ein Werkzeug zum Öffnen von Tablets. Durch das Auflegen des erhitzten iOpeners werden die Klebeversiegelungen zwischen Bauteilen und Gehäuse aufgeweicht. Dann kann der Kleber mit einem der im iOpener Kit enthaltenen Werkzeuge durchgeschnitten werden. Der iOpener wurde speziell für iPads entwickelt, kann aber für alle Tablets, Smartphones oder andere elektronische Geräten verwendet werden, für die bei der Demontage Wärme notwendig ist. Der iOpener wird in der Mikrowelle erhitzt. Er ist wiederverwendbar, ungiftig und lebensmittelecht. Technische Daten iOpener Spudger iFixit Öffnungswerkzeug Plektren (6 Stück) Plastic Cards (Scheckkartengroße Kunststoffkarten) Plastikteil zum Isolieren der Batterie Saugheber mit Griff Pinzette Sortierschale iFixit Präzisionsschraubendreher Kreuzschlitz (Phillips) #00 Bit SIM Eject Bit
The KG2 Gold from Zep Italia is a polystyrene photo frame which is suitable for 1 photo. The following size can be placed in the frame, 13x18 cm. The photo frame features a sleek look. The total dimensions, including the frame, ...
Toote kirjeldus inglise keeles:If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior. In addition, dust in the housing is the main reason for overheating and thus for possible, unstable operation. Although a cleaning time-to-time can not be prevented, however, the effort can be significantly reduced. A simple and cost-effective solution are dust filters, which are placed in front of the sucking fans. Once installed, it is no longer necessary to dedust the entire interior with all its inaccessible corners and sensitive components, only the filters. DEMCiflex offers a particularly easy-to-retrofit solution. Here, the filter is simply placed from the outside of the housing on the fan opening and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction. Since not all fan positions are magnetically attractive, an additional frame to the scope of delivery is glued to the back and on which the filter is held. The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly. Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. This is very simple in many ways. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt. Finally, a few notes on the installation: First, the question arises, which fans have to be covered at all. As already mentioned, this applies exclusively to the sucking fans. But which are they? The safest way to recognize this is on the fan itself, with two arrows on the outside or inside of the fan frame. If one of the two arrows points towards the interior or if the rotor suspension is aligned with the interior, this is an aspirating fan. These are usually located on the front, side and bottom, whereas the rear and cover fans usually carry the air out of the housing and therefore need not be filtered. In order to maximize the filter effect, an overpressure in the housing can be generated. This means that more volume of air is forced into the housing than is being sucked out of the housing by other fans at the same time. This prevents air (and with it the dust) from entering the interior through other openings that may not have been filtered. If all fans are the same size, you should blow more fans into the housing than pull out. In this case, the power supply is to be counted as an additional, extracting fan, as long as it does not receive its supply (fan side) directly from the outside (occurs at floor mounting). If different fans with different sizes and speeds are used, the respective air volumes (m³ / h) in the data sheets give a good reference value, whereby in turn the total volume of the suction fans must be higher than that of the blowing out fans. Note: The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate.
The Jabra LINK 14201-35 enables remote Electronic Hook Switch control (EHS) with Jabra wireless headsets. Jabra wireless headsets with EHS functionality boost productivity as they provide the user with the ability to answer and end a call, while away from their desk.All quite convenient, when they are up to 450 feet away from their desk! The integration of desk phone and headset allows users to benefit from enhanced mobility and the ability to multitask while on a call. The wireless freedom improves work efficiency and ergonomics throughout the day.
@page { margin: 2cm } p { margin-bottom: 0.25cm; line-height: 120% } Käsitsi valmistatud korpus on valmistatud kõrgekvaliteedilisest puidust ja vegaanist nahast Kaitseb teie iPhone'i kriimustuste, tolmu ja löökide eest Lihtne klõpsamissüsteem ja täpsed väljalõiked kaamera, nuppude, kõlarite jaoks Ekraani kaitsmine iPhone'i tagurpidi asetamisel Toetab QI traadita laadimistehnoloogiat
Samsung Galaxy Tab S6 Lite kaaned kinnituvad magnetiliselt tahvelarvuti külge, nii et saad uksest välja minnes selle lihtsalt kaasa haarata. Kaantel on olemas puutepliiatsi pesa, et S-Pen maha ei ununeks. Ümbrist saab kasutada ka mugavalt tugijalana, et jälgida ekraanil toimuvat või mugavamalt teksti sisestada.
