Firma: YEInternational AS

See Delocki WLAN-antenn võimaldab kasutada erinevaid WLAN-sagedusalasid nii siseruumides kui ka välistingimustes.     Spetsifikatsioon - Ühendus: 1 x N-pesa - Sagedusvahemik: 2,400 - 2,500 GHz. - Antenni summutus: 12 dBi - Impedants: 50 Ohm - Polarisatsioon: lineaarne vertikaalne - Kiirte laius:   horisontaalne: 360°   vertikaalne: 8° - VSWR: 1,5 - Võimsus: max. 100 W - Töötemperatuur: -40 °C ~ 80 °C - Korpuse materjal: materjal: GFK, UV-kaitsega - Värvus: valge - Antenni pikkus: ca. 118,5 cm - Antenni läbimõõt: ca. 2,3 cm     Süsteeminõuded - Vaba N-pistikuga seade     Pakendi sisu - WLAN-antenn - 2 x postikinnitus

Neid Delocki krimpkontakte saab kasutada juhtmete krimpimiseks ja need sobivad D-Sub krimpühenduste jaoks. Spetsifikatsioon D-Sub pistikutele, millel on naissoost krimpkontaktid Kaabli gabariit: 24 - 20 AWG Isolatsiooni läbimõõt: 2,1 mm Läbimõõt: ca. 1,0 mm Kontaktid kullatud Töötemperatuur: -40 °C ~ 105 °C Pakendi sisu 40 x krimpkontaktid

See Delocki antenn võimaldab kasutada erinevaid LTE-sagedusalasid nii siseruumides kui ka välistingimustes.     Spetsifikatsioon Ühendus: 1 x SMA-pistik Sagedusvahemik: 698 MHz - 960 MHz 1710 MHz - 2170 MHz 2500 MHz - 2700 MHz ZigBee, LoRa, DECT, Z-Wave, NB-IoT, Bluetooth, GSM, UMTS, LTE, ISM, WLAN. Antenni võimendus: 2 - 3 dBi Impedants: 50 Ohm VSWR: 1,5 Polarisatsioon: lineaarne, vertikaalne Töötemperatuur: -20 °C ~ 70 °C Korpuse materjal: ABS Kaitseklass: IPX5 Kaabel: koaksiaalkaabel Kaabli tüüp: RG-174 A/U Kaabli värvus: must Kaabli sumbuvus: 1,5 dB @ 1,5 GHz meetri kohta Kaabli läbimõõt: ca 2,7 mm Kaabli pikkus koos pistikuga: ca 3 m Mõõtmed (LxD): ca. 110,0 x 48,0 mm   Süsteeminõuded Vaba SMA-pistikuga seade   Pakendi sisu   Antenni

AdderLink INFINITY transmitter and receiver units allow multiple remote users to access host computers in a very flexible manner. Such flexibility requires management and coordination - that is where AdderLink INFINITY Manager (AIM) becomes vital. Highlights • Intuitive, multi-lingual user interface • Multiple switching methods • Configurable user access rights • Full audit trail • Easy centralized management • Open API for 3rd party control AIM management server is a control suite which transforms AdderLink INFINITY extenders into a digital matrix solution. Using standard IP infrastructure it is possible to route any user station to any computer attached to the network without any compromises to video quality or control. It allows co-operative sharing of computers and the multicasting of video to any destination. AIM is designed to promote the most efficient use of AdderLink INFINITY units by allowing central control over any number of transmitters (more commonly referred to as 'Channels' within AIM) and receivers. Using the intuitive AIM webbased interface, one or more administrators can manage potentially thousands of users who are interacting with an almost unlimited number of devices. Adder INFINITY Management operates from a self-contained compact server unit that can be situated anywhere within your network. AIM server is supplied pre-loaded and is straightforward to deploy, requiring only a network connection and a power input to begin operation. All configuration of your INFINITY transmitters (channels), receivers and users are performed using the intuitive AIM browser interface via a network connected computer. Secure access and communications Using TLS (transport layer security) and HTTPS, communications between AdderLink units and AIM and between AIM and the outside world are all secure. Redundant operation For 24/7 reliability a second hot AIM can be added to ensure constant uptime and with dual NIC interfaces on every AdderLink INFINITY unit, systems can be easily designed for maximum resilience. User access rights management and audit trails Administrators can manage access rights to each device on a user by user basis either manually through the web browser or automatically using Active Directory. Reports showing the history of devices, user logins and device connections can be viewed and exported to a CSV file or via SYSLOG. Easy centralized management Accessed via a web browser, the dashboard gives a real time overview of system connections and users. Tabs enable you to navigate between settings and device or user sub-menus. Control Channel and Presets connections AIM can be used to make connections between an individual pair of transmitter and receiver devices centrally from within the management system. Using Presets, a list of pre-defined connections, multiscreen, video wall or signage setups can be forced with a single click. Internationalization The user desks can select different keyboard configurations to suite their requirements and as a global setting select the language for the OSD from a choice of over 14 languages. On screen display at each user station Users login and choose channel connections from an intuitive OSD similar to that of a Digital TV. Users can also use Presets to change channels for multiple screens across multiple receivers. Remote OSD The remote OSD allows the user to "push" video and control to another station or to a video wall or projector. Favourites and hotkey switching Each user can select their favourite channels within the OSD and allocate a hotkey for fast switching between channels. Choice of connection modes Administrators can choose to give users the ability to connect in three modes: View only, Shared or Exclusive. Each permitted mode is then made available within the OSD. Fast video and USB switching The switching time between computers is less than 1 second to provide a quality user experience. Multicasting Network multicasting allows the system to share video simultaneously from one transmitter to an unlimited number of receivers. Suitable for signage, monitoring and sharing of desktops. USB sharing USB sharing allows multiple users to connect to and control a single computer at the same time. Each transmitter can report 12 unique USB devices (identified by VID/PID codes) but will merge devices with the same ID to allow many more. Channels Considered as a Virtual Transmitter, a channel may combine video, audio and USB from different transmitters as a single source. Ideal where audio alerts or mixed video sources are required. Open API for 3rd party control systems Adder Technology publishes a simple API structure to allow easy integration with other 3rd Party control systems supplied by companies like AMX, Crestron , HRS or MediaLon at a HTTP level. LDAP integration To help ease setup, the system has an LDAP interface so users and passwords from other systems can easily be imported. SNMP v3 get / walk External machines can interrogate AIM to find out the status of the AdderLink INFINITY network and units. SNMP v3 security is implemented, supporting AES/DES transport with MD5/SHA authentication. External NTP server support – NTPv4.2 Connect up to 3 NTP servers with authenticated connections using MD5 and Key ID as defined in the NTP standards. All AdderLink INFINITY units in an AIM network now get time using authenticated NTP from AIM System backups Backups of the database can be saved internally, externally or emailed automatically. Automatic updates can be scheduled on an hourly, daily or weekly basis. Centralized firmware upgrades As well as managing its own firmware upgrade, AIM manages the upgrade of each device on the network and can deploy firmware to hundreds of devices at the same time, meaning a system-wide upgrade takes only a few minutes. Easy matrix setup Using Zero Configuration networking, AIM automatically obtains the MAC addresses of extender devices as they are attached to the network. The administrator allocates IP addresses, names and locations so that devices are easy to identify, configure and control.

ADDERLink® INFINITY Management (AIM) süsteemile on saadaval erinevad lõppseadmete litsentsi valikud. Laiendage ADDERLink INFINITY lõppseadmete arvu valikuga 48, 96, 192, 288 või piiramatu. Lisafunktsioonide, nagu automaatne sisselogimine, lisamiseks vaadake AIMLIC-PACK1.

AdderLink INFINITY transmitter and receiver units allow multiple remote users to access host computers in a very flexible manner. Such flexibility requires management and coordination - that is where AdderLink INFINITY Manager (AIM) becomes vital. Highlights • Intuitive, multi-lingual user interface • Multiple switching methods • Configurable user access rights • Full audit trail • Easy centralized management • Open API for 3rd party control AIM management server is a control suite which transforms AdderLink INFINITY extenders into a digital matrix solution. Using standard IP infrastructure it is possible to route any user station to any computer attached to the network without any compromises to video quality or control. It allows co-operative sharing of computers and the multicasting of video to any destination. AIM is designed to promote the most efficient use of AdderLink INFINITY units by allowing central control over any number of transmitters (more commonly referred to as 'Channels' within AIM) and receivers. Using the intuitive AIM webbased interface, one or more administrators can manage potentially thousands of users who are interacting with an almost unlimited number of devices. Adder INFINITY Management operates from a self-contained compact server unit that can be situated anywhere within your network. AIM server is supplied pre-loaded and is straightforward to deploy, requiring only a network connection and a power input to begin operation. All configuration of your INFINITY transmitters (channels), receivers and users are performed using the intuitive AIM browser interface via a network connected computer. Secure access and communications Using TLS (transport layer security) and HTTPS, communications between AdderLink units and AIM and between AIM and the outside world are all secure. Redundant operation For 24/7 reliability a second hot AIM can be added to ensure constant uptime and with dual NIC interfaces on every AdderLink INFINITY unit, systems can be easily designed for maximum resilience. User access rights management and audit trails Administrators can manage access rights to each device on a user by user basis either manually through the web browser or automatically using Active Directory. Reports showing the history of devices, user logins and device connections can be viewed and exported to a CSV file or via SYSLOG. Easy centralized management Accessed via a web browser, the dashboard gives a real time overview of system connections and users. Tabs enable you to navigate between settings and device or user sub-menus. Control Channel and Presets connections AIM can be used to make connections between an individual pair of transmitter and receiver devices centrally from within the management system. Using Presets, a list of pre-defined connections, multiscreen, video wall or signage setups can be forced with a single click. Internationalization The user desks can select different keyboard configurations to suite their requirements and as a global setting select the language for the OSD from a choice of over 14 languages. On screen display at each user station Users login and choose channel connections from an intuitive OSD similar to that of a Digital TV. Users can also use Presets to change channels for multiple screens across multiple receivers. Remote OSD The remote OSD allows the user to "push" video and control to another station or to a video wall or projector. Favourites and hotkey switching Each user can select their favourite channels within the OSD and allocate a hotkey for fast switching between channels. Choice of connection modes Administrators can choose to give users the ability to connect in three modes: View only, Shared or Exclusive. Each permitted mode is then made available within the OSD. Fast video and USB switching The switching time between computers is less than 1 second to provide a quality user experience. Multicasting Network multicasting allows the system to share video simultaneously from one transmitter to an unlimited number of receivers. Suitable for signage, monitoring and sharing of desktops. USB sharing USB sharing allows multiple users to connect to and control a single computer at the same time. Each transmitter can report 12 unique USB devices (identified by VID/PID codes) but will merge devices with the same ID to allow many more. Channels Considered as a Virtual Transmitter, a channel may combine video, audio and USB from different transmitters as a single source. Ideal where audio alerts or mixed video sources are required. Open API for 3rd party control systems Adder Technology publishes a simple API structure to allow easy integration with other 3rd Party control systems supplied by companies like AMX, Crestron , HRS or MediaLon at a HTTP level. LDAP integration To help ease setup, the system has an LDAP interface so users and passwords from other systems can easily be imported. SNMP v3 get / walk External machines can interrogate AIM to find out the status of the AdderLink INFINITY network and units. SNMP v3 security is implemented, supporting AES/DES transport with MD5/SHA authentication. External NTP server support – NTPv4.2 Connect up to 3 NTP servers with authenticated connections using MD5 and Key ID as defined in the NTP standards. All AdderLink INFINITY units in an AIM network now get time using authenticated NTP from AIM System backups Backups of the database can be saved internally, externally or emailed automatically. Automatic updates can be scheduled on an hourly, daily or weekly basis. Centralized firmware upgrades As well as managing its own firmware upgrade, AIM manages the upgrade of each device on the network and can deploy firmware to hundreds of devices at the same time, meaning a system-wide upgrade takes only a few minutes. Easy matrix setup Using Zero Configuration networking, AIM automatically obtains the MAC addresses of extender devices as they are attached to the network. The administrator allocates IP addresses, names and locations so that devices are easy to identify, configure and control.

ADDERLink® INFINITY Manager lõppseadme litsentsLitsentsi valikud lõppseadmete arvu kohta süsteemisADDERLink® INFINITY Management (AIM) süsteemile on saadaval mitmesugused lõppseadme litsentsi valikud. Laiendage ADDERLink INFINITY lõppseadmete arvu valikuga 48, 96, 192, 288 või piiramatu. Lisafunktsioonide, nagu automaatne sisselogimine, lisamiseks vaadake AIMLIC-PACK1.

AdderLink INFINITY transmitter and receiver units allow multiple remote users to access host computers in a very flexible manner. Such flexibility requires management and coordination - that is where AdderLink INFINITY Manager (AIM) becomes vital. Highlights • Intuitive, multi-lingual user interface • Multiple switching methods • Configurable user access rights • Full audit trail • Easy centralized management • Open API for 3rd party control AIM management server is a control suite which transforms AdderLink INFINITY extenders into a digital matrix solution. Using standard IP infrastructure it is possible to route any user station to any computer attached to the network without any compromises to video quality or control. It allows co-operative sharing of computers and the multicasting of video to any destination. AIM is designed to promote the most efficient use of AdderLink INFINITY units by allowing central control over any number of transmitters (more commonly referred to as 'Channels' within AIM) and receivers. Using the intuitive AIM webbased interface, one or more administrators can manage potentially thousands of users who are interacting with an almost unlimited number of devices. Adder INFINITY Management operates from a self-contained compact server unit that can be situated anywhere within your network. AIM server is supplied pre-loaded and is straightforward to deploy, requiring only a network connection and a power input to begin operation. All configuration of your INFINITY transmitters (channels), receivers and users are performed using the intuitive AIM browser interface via a network connected computer. Secure access and communications Using TLS (transport layer security) and HTTPS, communications between AdderLink units and AIM and between AIM and the outside world are all secure. Redundant operation For 24/7 reliability a second hot AIM can be added to ensure constant uptime and with dual NIC interfaces on every AdderLink INFINITY unit, systems can be easily designed for maximum resilience. User access rights management and audit trails Administrators can manage access rights to each device on a user by user basis either manually through the web browser or automatically using Active Directory. Reports showing the history of devices, user logins and device connections can be viewed and exported to a CSV file or via SYSLOG. Easy centralized management Accessed via a web browser, the dashboard gives a real time overview of system connections and users. Tabs enable you to navigate between settings and device or user sub-menus. Control Channel and Presets connections AIM can be used to make connections between an individual pair of transmitter and receiver devices centrally from within the management system. Using Presets, a list of pre-defined connections, multiscreen, video wall or signage setups can be forced with a single click. Internationalization The user desks can select different keyboard configurations to suite their requirements and as a global setting select the language for the OSD from a choice of over 14 languages. On screen display at each user station Users login and choose channel connections from an intuitive OSD similar to that of a Digital TV. Users can also use Presets to change channels for multiple screens across multiple receivers. Remote OSD The remote OSD allows the user to "push" video and control to another station or to a video wall or projector. Favourites and hotkey switching Each user can select their favourite channels within the OSD and allocate a hotkey for fast switching between channels. Choice of connection modes Administrators can choose to give users the ability to connect in three modes: View only, Shared or Exclusive. Each permitted mode is then made available within the OSD. Fast video and USB switching The switching time between computers is less than 1 second to provide a quality user experience. Multicasting Network multicasting allows the system to share video simultaneously from one transmitter to an unlimited number of receivers. Suitable for signage, monitoring and sharing of desktops. USB sharing USB sharing allows multiple users to connect to and control a single computer at the same time. Each transmitter can report 12 unique USB devices (identified by VID/PID codes) but will merge devices with the same ID to allow many more. Channels Considered as a Virtual Transmitter, a channel may combine video, audio and USB from different transmitters as a single source. Ideal where audio alerts or mixed video sources are required. Open API for 3rd party control systems Adder Technology publishes a simple API structure to allow easy integration with other 3rd Party control systems supplied by companies like AMX, Crestron , HRS or MediaLon at a HTTP level. LDAP integration To help ease setup, the system has an LDAP interface so users and passwords from other systems can easily be imported. SNMP v3 get / walk External machines can interrogate AIM to find out the status of the AdderLink INFINITY network and units. SNMP v3 security is implemented, supporting AES/DES transport with MD5/SHA authentication. External NTP server support – NTPv4.2 Connect up to 3 NTP servers with authenticated connections using MD5 and Key ID as defined in the NTP standards. All AdderLink INFINITY units in an AIM network now get time using authenticated NTP from AIM System backups Backups of the database can be saved internally, externally or emailed automatically. Automatic updates can be scheduled on an hourly, daily or weekly basis. Centralized firmware upgrades As well as managing its own firmware upgrade, AIM manages the upgrade of each device on the network and can deploy firmware to hundreds of devices at the same time, meaning a system-wide upgrade takes only a few minutes. Easy matrix setup Using Zero Configuration networking, AIM automatically obtains the MAC addresses of extender devices as they are attached to the network. The administrator allocates IP addresses, names and locations so that devices are easy to identify, configure and control.

AdderLink INFINITY transmitter and receiver units allow multiple remote users to access host computers in a very flexible manner. Such flexibility requires management and coordination - that is where AdderLink INFINITY Manager (AIM) becomes vital. Highlights • Intuitive, multi-lingual user interface • Multiple switching methods • Configurable user access rights • Full audit trail • Easy centralized management • Open API for 3rd party control AIM management server is a control suite which transforms AdderLink INFINITY extenders into a digital matrix solution. Using standard IP infrastructure it is possible to route any user station to any computer attached to the network without any compromises to video quality or control. It allows co-operative sharing of computers and the multicasting of video to any destination. AIM is designed to promote the most efficient use of AdderLink INFINITY units by allowing central control over any number of transmitters (more commonly referred to as 'Channels' within AIM) and receivers. Using the intuitive AIM webbased interface, one or more administrators can manage potentially thousands of users who are interacting with an almost unlimited number of devices. Adder INFINITY Management operates from a self-contained compact server unit that can be situated anywhere within your network. AIM server is supplied pre-loaded and is straightforward to deploy, requiring only a network connection and a power input to begin operation. All configuration of your INFINITY transmitters (channels), receivers and users are performed using the intuitive AIM browser interface via a network connected computer. Secure access and communications Using TLS (transport layer security) and HTTPS, communications between AdderLink units and AIM and between AIM and the outside world are all secure. Redundant operation For 24/7 reliability a second hot AIM can be added to ensure constant uptime and with dual NIC interfaces on every AdderLink INFINITY unit, systems can be easily designed for maximum resilience. User access rights management and audit trails Administrators can manage access rights to each device on a user by user basis either manually through the web browser or automatically using Active Directory. Reports showing the history of devices, user logins and device connections can be viewed and exported to a CSV file or via SYSLOG. Easy centralized management Accessed via a web browser, the dashboard gives a real time overview of system connections and users. Tabs enable you to navigate between settings and device or user sub-menus. Control Channel and Presets connections AIM can be used to make connections between an individual pair of transmitter and receiver devices centrally from within the management system. Using Presets, a list of pre-defined connections, multiscreen, video wall or signage setups can be forced with a single click. Internationalization The user desks can select different keyboard configurations to suite their requirements and as a global setting select the language for the OSD from a choice of over 14 languages. On screen display at each user station Users login and choose channel connections from an intuitive OSD similar to that of a Digital TV. Users can also use Presets to change channels for multiple screens across multiple receivers. Remote OSD The remote OSD allows the user to "push" video and control to another station or to a video wall or projector. Favourites and hotkey switching Each user can select their favourite channels within the OSD and allocate a hotkey for fast switching between channels. Choice of connection modes Administrators can choose to give users the ability to connect in three modes: View only, Shared or Exclusive. Each permitted mode is then made available within the OSD. Fast video and USB switching The switching time between computers is less than 1 second to provide a quality user experience. Multicasting Network multicasting allows the system to share video simultaneously from one transmitter to an unlimited number of receivers. Suitable for signage, monitoring and sharing of desktops. USB sharing USB sharing allows multiple users to connect to and control a single computer at the same time. Each transmitter can report 12 unique USB devices (identified by VID/PID codes) but will merge devices with the same ID to allow many more. Channels Considered as a Virtual Transmitter, a channel may combine video, audio and USB from different transmitters as a single source. Ideal where audio alerts or mixed video sources are required. Open API for 3rd party control systems Adder Technology publishes a simple API structure to allow easy integration with other 3rd Party control systems supplied by companies like AMX, Crestron , HRS or MediaLon at a HTTP level. LDAP integration To help ease setup, the system has an LDAP interface so users and passwords from other systems can easily be imported. SNMP v3 get / walk External machines can interrogate AIM to find out the status of the AdderLink INFINITY network and units. SNMP v3 security is implemented, supporting AES/DES transport with MD5/SHA authentication. External NTP server support – NTPv4.2 Connect up to 3 NTP servers with authenticated connections using MD5 and Key ID as defined in the NTP standards. All AdderLink INFINITY units in an AIM network now get time using authenticated NTP from AIM System backups Backups of the database can be saved internally, externally or emailed automatically. Automatic updates can be scheduled on an hourly, daily or weekly basis. Centralized firmware upgrades As well as managing its own firmware upgrade, AIM manages the upgrade of each device on the network and can deploy firmware to hundreds of devices at the same time, meaning a system-wide upgrade takes only a few minutes. Easy matrix setup Using Zero Configuration networking, AIM automatically obtains the MAC addresses of extender devices as they are attached to the network. The administrator allocates IP addresses, names and locations so that devices are easy to identify, configure and control.

AdderLink INFINITY transmitter and receiver units allow multiple remote users to access host computers in a very flexible manner. Such flexibility requires management and coordination - that is where AdderLink INFINITY Manager (AIM) becomes vital. Highlights • Intuitive, multi-lingual user interface • Multiple switching methods • Configurable user access rights • Full audit trail • Easy centralized management • Open API for 3rd party control AIM management server is a control suite which transforms AdderLink INFINITY extenders into a digital matrix solution. Using standard IP infrastructure it is possible to route any user station to any computer attached to the network without any compromises to video quality or control. It allows co-operative sharing of computers and the multicasting of video to any destination. AIM is designed to promote the most efficient use of AdderLink INFINITY units by allowing central control over any number of transmitters (more commonly referred to as 'Channels' within AIM) and receivers. Using the intuitive AIM webbased interface, one or more administrators can manage potentially thousands of users who are interacting with an almost unlimited number of devices. Adder INFINITY Management operates from a self-contained compact server unit that can be situated anywhere within your network. AIM server is supplied pre-loaded and is straightforward to deploy, requiring only a network connection and a power input to begin operation. All configuration of your INFINITY transmitters (channels), receivers and users are performed using the intuitive AIM browser interface via a network connected computer. Secure access and communications Using TLS (transport layer security) and HTTPS, communications between AdderLink units and AIM and between AIM and the outside world are all secure. Redundant operation For 24/7 reliability a second hot AIM can be added to ensure constant uptime and with dual NIC interfaces on every AdderLink INFINITY unit, systems can be easily designed for maximum resilience. User access rights management and audit trails Administrators can manage access rights to each device on a user by user basis either manually through the web browser or automatically using Active Directory. Reports showing the history of devices, user logins and device connections can be viewed and exported to a CSV file or via SYSLOG. Easy centralized management Accessed via a web browser, the dashboard gives a real time overview of system connections and users. Tabs enable you to navigate between settings and device or user sub-menus. Control Channel and Presets connections AIM can be used to make connections between an individual pair of transmitter and receiver devices centrally from within the management system. Using Presets, a list of pre-defined connections, multiscreen, video wall or signage setups can be forced with a single click. Internationalization The user desks can select different keyboard configurations to suite their requirements and as a global setting select the language for the OSD from a choice of over 14 languages. On screen display at each user station Users login and choose channel connections from an intuitive OSD similar to that of a Digital TV. Users can also use Presets to change channels for multiple screens across multiple receivers. Remote OSD The remote OSD allows the user to "push" video and control to another station or to a video wall or projector. Favourites and hotkey switching Each user can select their favourite channels within the OSD and allocate a hotkey for fast switching between channels. Choice of connection modes Administrators can choose to give users the ability to connect in three modes: View only, Shared or Exclusive. Each permitted mode is then made available within the OSD. Fast video and USB switching The switching time between computers is less than 1 second to provide a quality user experience. Multicasting Network multicasting allows the system to share video simultaneously from one transmitter to an unlimited number of receivers. Suitable for signage, monitoring and sharing of desktops. USB sharing USB sharing allows multiple users to connect to and control a single computer at the same time. Each transmitter can report 12 unique USB devices (identified by VID/PID codes) but will merge devices with the same ID to allow many more. Channels Considered as a Virtual Transmitter, a channel may combine video, audio and USB from different transmitters as a single source. Ideal where audio alerts or mixed video sources are required. Open API for 3rd party control systems Adder Technology publishes a simple API structure to allow easy integration with other 3rd Party control systems supplied by companies like AMX, Crestron , HRS or MediaLon at a HTTP level. LDAP integration To help ease setup, the system has an LDAP interface so users and passwords from other systems can easily be imported. SNMP v3 get / walk External machines can interrogate AIM to find out the status of the AdderLink INFINITY network and units. SNMP v3 security is implemented, supporting AES/DES transport with MD5/SHA authentication. External NTP server support – NTPv4.2 Connect up to 3 NTP servers with authenticated connections using MD5 and Key ID as defined in the NTP standards. All AdderLink INFINITY units in an AIM network now get time using authenticated NTP from AIM System backups Backups of the database can be saved internally, externally or emailed automatically. Automatic updates can be scheduled on an hourly, daily or weekly basis. Centralized firmware upgrades As well as managing its own firmware upgrade, AIM manages the upgrade of each device on the network and can deploy firmware to hundreds of devices at the same time, meaning a system-wide upgrade takes only a few minutes. Easy matrix setup Using Zero Configuration networking, AIM automatically obtains the MAC addresses of extender devices as they are attached to the network. The administrator allocates IP addresses, names and locations so that devices are easy to identify, configure and control.

This ergonomical designed soft wrist rest by Delock acts with its soft filling very relieving when working with a mouse. Due to its curved shape it is most suitable for operation of a mouse.   Specification • Flexible soft wrist rest • Rubberized bottom • Dimensions (LxWxH): ca. 165 x 115 x 25 mm • Colour: black   Package content • Wrist rest

ADDERLink Infinity ALIF1002T is a high performance KVM (Keyboard, Video and Mouse) transmitter that forms part of the ALIF 1002 KVM extension system. This enables you to locate your critical computing hardware in a secure and temperature controlled environment away from the user work station, whilst maintaining a pixel perfect desktop experience. ALIF1002T is the transmitter only, that requires the ALIF1002R receiver to operate. Plug and play 100m extension distance on single CATx; unlimited using standard IP network 500m to 10km over fiber Single link or single head configuration 1920 x 1200@60Hz maximum resolution Support for MacPro Redundant network operation Application diagram showing the ALIF 1002 system (The ALIF1002T requires a compatible receiver) LEARN MORE - ADDER INFINITY SERIES Features of the ALIF 1002 Extender system Perfect digital video, real time control Using a spatially-lossless encoding system, with 1:1 pixel mapping, AdderLink Infinity provides pixel perfect and color accurate video with no artefacts. The digital video you receive is the same as the digital video leaving the remote computer. Single CATx cable or fiber with immunity from interference From the outset we designed AdderLink Infinity units around a highly robust signaling method. This vital core asset is what gives you the freedom to use the full variety of cable links that you typically find within an average structured cabling system. The result is that you can achieve reliable links, regardless of whether the cables are CAT5e, CAT6 or CAT7. The AdderLink Infinity also offers the option of up to 10km distances with fiber. Unlimited extension distances Extension distance is not limited to a single 100 meter cable length - If you need to extend further, simply add a 1GbE network device to achieve an additional 100 meters. This can be repeated many times. The units are also fitted with SFP cages to accept fiber optic transceivers which enable much greater extension distances. Support for MacPro (Dithered Video) Some graphics cards use a technique called dithering to give the appearance of a deeper color depth than is actually the case. As a result, dithering can significantly increase the normal video data rates. ALIF1002T has a feature called Magic Eye which supports dithering without allowing it to degrade overall link performance. USB 2.0 with class control Enables connection of USB devices from mice and keyboards through to graphics tablets, jog shuttles, joysticks and 3D explorers, alongside mass storage devices. For applications where security is of high importance, the system has the ability to disable the use of non-HID devices, meaning there is no need to physically block USB ports to prevent the use of mass storage devices. EDID management Intelligent EDID management allows the true characteristics of the monitor to be passed back to the computer. This ensures perfect video display without the additional configuration. Plug and Play AdderLink Infinity extender devices are delivered in a zero configuration state so you can plug them in and start working on them straight away. There is no need for drivers or software to be installed. Redundant network operation The units are able to detect whether the network is in operation and can automatically change to its second network port if it detects a failure AdderLink Infinity Matrix With the addition of AdderLink Infinity management system (A.I.M.) you can turn multiple point-to-point extenders into a truly scalable digital KVM matrix system that allows any workstation to link with any computer connected to the network. See the Adderlink Infinity Matrix Manager for details

ADDERLink® INFINITY 101T DVIKõrge jõudlusega ZeroU™ IP KVM dongel video, heli ja USB ühenduse laiendamiseks või maatriksiks ühe kaabli abil.ADDERLink® INFINITY 101T (ALIF101T) on kõrge jõudlusega ZeroU IP KVM laiendaja maatriksiga, mis võimaldab kasutada standardseid IT-infrastruktuure arvutite kasutajakeskkusest eemal asuvate arvutite ühendamiseks.

Seda Delocki RJ45 pistikut saab kasutada võrgukaablite ühendamiseks. Pistiku paigaldamine erinevatele kaablitüüpidele on tööriistavaba ja ajasäästlik.   Spetsifikatsioon • Ühendused: 1 x RJ45 pistik • Kaabli suunamine 180° • Varjestatud (STP) • Vastab standardi ISO/IEC 11801 väljaande 2.2 Cat.6A nõuetele,   EN 50173-1:2011 ja EN 60603-7-51 ning ANSI/TIA 568-C.2 • Toetab PoE / PoE+ • TIA-568B pinout • Tahke või keerutatud traadi jaoks kuni 0,644 mm (22–26 AWG) • Kaabli läbimõõduga 6,0 - 8,5 mm • Mõõdud (PxLxK): ca. 53,7 x 16,4 x 14,0 mm

he A.I.M. management server (AIM-24) is a control suite which transforms ADDERLink INFINITY extenders into a digital matrix solution. Using standard IP infrastructure it is possible to route any user station to any computer attached to the network without any compromises to video quality or control. It allows co-operative sharing of computers and the multicasting of video to any destination. Includes 24 End Point licenses (expandable up to infinite primary & failover end points) Intuitive, multi-lingual user interface Multiple switching methods Configurable user access rights Full audit trail Easy centralized management of Adder INFINITY Transmitters & Receivers Open API for 3rd party control Sun, PC and Mac compatible RJ45 Interface Hourly to Weekly automatic database backups Centralized Firmware Updates - Push updates to hundreds of devices, system-wide in minutes Adder INFINITY Manager Features - System administration Infinite Flexibility With the ADDERLink INFINITY management system (A.I.M.), you can turn multiple INFINITY point-to-point extenders into a truly scalable digital KVM matrix system that allows any workstation to link with any computer connected to the network. Point-to-point extension (local / over-IP) AV / KVM Switch multi-point matrix (over-IP) Sharing a single target (over-IP) Multicasting to many receivers (over-IP) Command Center / Video Wall Controller (over-IP) Learn more Easy centralized management of Unlimited end-points Accessed via a web browser, the INFINITY dashboard gives a real time overview of system connections and users. Tabs enable you to navigate between settings and device or user sub-menus. Secure access and communications Using TLS (transport layer security) and HTTPS ensures communications between Adder INFINITY units and A.I.M. and between A.I.M. and the outside world are all secure. Built-in security measures are compliant with universal enterprise grade security standards including SNMPv3, AES/DES encryption, and MD5/SHA authentication User access management and audit trails Each user can be granted different access permissions on a per computer basis. Administrators can also select which levels of control will be available, allowing users to choose between View only, Shared, Exclusive or Private connection modes. Reports showing the history of devices, user logins and device connections can be viewed and exported to a CSV file or via SYSLOG. Control End-points and set presets A.I.M. is used to facilitate connections between INFINITY transmitter and receiver devices through a easy centralized management system. Using Presets, a list of pre-defined connections, multiscreen, video wall or signage setups can be brought up with a single click. Redundant network operation To ensure 24/7 uptime, a second A.I.M. can be added for redundant network. The units will automatically change to the second network port if they detect a failure. Most INFINITY Transmitters and Receivers also feature dual NIC network interfaces, allowing your full solution to be easily designed for maximum resilience. Easy matrix setup The A.I.M. automatically obtains the MAC addresses of extender transmitters & receivers as they are attached to the network using Zero Configuration networking. The administrator allocates IP addresses, names and locations so that devices are easy to identify, configure and control. Open API for 3rd party control systems Adder Technology publishes a simple API structure that allows easy integration with other 3rd-party control systems supplied by companies like AMX, Crestron, HRS or MediaLon at a HTTP level. Adder INFINITY Manager Features - Intuitive user interface On-screen-display (OSD) at each user station After logging in, users choose channel connections from an intuitive OSD similar to that of a Digital TV. Users can also use Presets to change channels for multiple screens across multiple receivers. Remote OSD The remote OSD allows the user to "push" video and control to another station or to a video wall or projector. Favorites & Fast hotkey switching Video and USB switching time between computer sources is less than 1 second to provide a quality user experience. Each user can also select their favorite channels within the OSD and allocate a hotkey for faster switching between channels. USB device sharing USB sharing allows multiple users to connect to and control a single computer at the same time. Each transmitter can report 12 unique USB devices (identified by VID/PID codes) but will merge devices with the same ID to allow many more. Virtual KVM Transmitter Channels A Virtual Transmitter Channel can be setup via the management software to combine video, audio and USB from different transmitters as a single source. Ideal application where audio alerts or mixed video sources are required. LDAP integration LDAP allows integration and user authentication with a directory server such MS Active Directory, OpenLDAP or OpenDJ. To help ease setup, the systems LDAP interface can easily import users and passwords from other systems. SNMP v3 get / walk External machines can check status of the AdderLink Infinity network and units through the A.I.M. SNMP v3 security is implemented, supporting AES/DES transport with MD5/SHA authentication. External NTP server support - NTPv4.2 Connect up to 3 NTP servers with authenticated connections using MD5 and Key ID as defined in the NTP standards. All AdderLink Infinity units in an A.I.M. network now get time using authenticated NTP from A.I.M. Centralized firmware upgrades As well as managing its own firmware upgrade, A.I.M. manages the upgrade of each device on the network and can deploy firmware to hundreds of devices at the same time, meaning a system-wide upgrade takes only a few minutes. System backups Backups of the database can be saved internally, externally or emailed automatically. Automatic updates can be scheduled on an hourly, daily or weekly basis. AIM-24 Package Contents (1) AIM-24 A.I.M. server unit with integral rack brackets (1) PSU-IEC-12VDC-5A 12V, 5A Power supply + US mains cable (4) Self-adhesive rubber feet (1) Quick start guide and Safety document (1) 2-Year Limited Warranty & Lifetime World Class Support - Expandable up to 5-years

The ADDERView Analogue Enhanced SecureSwitch (AVSC1102) allows a keyboard, monitor and mouse to be shared between high and low security systems, "red and black networks" together with secure smartcard reader sharing. The high density, highly robust, small form factor unit ensures maximized security to prevent the compromise of critical data. Switch between two computers in secure environment High definition VGA video up to 1920 x 1200 @ 60Hz resolution USB keyboard & mouse - PS/2 with optional adapter Common-Access-Card (CAC) reader and keyboard support Tempest Certified (USA NSTISSAM Level I and NATO SDIP-27 Level A) NIAP 3.0 Common Criteria EAL 4+ Certified (augmented by ALC_FLR.2 and ATE_DPT.2) See Detailed Layout Adder AVSC1102 Features Tempest & EAL4+ (NIAP 3.0) certified Tempest testing is a strict NSA specification and a NATO certification to ensure that sensitive equipment doesn't leak information. Adder's new secure switch has been tested and qualified to the strictest Tempest standards (USA NSTISSAM Level I and NATO SDIP-27 Level A). This and 80dB crosstalk isolation means that the switches are amongst the lowest leakage KVMs in the world. SmartCard (CAC) reader support An optional smart card reader can be connected and used in conjunction with user authentication schemes. The smartcard system inside the switch is designed to introduce no greater risk than would be present if each computer had a separate card reader and the card was moved between them. Advanced tamper protection / reporting Anti-subversion monitoring - The enhanced models continually monitor their various defences for potential subversions (even when power is removed), such as: Dismantling of the case Tampering with the circuitry Loss or corruption of authentication security information. Authentication function AdderView Secure switches provide a trusted mechanism whereby you can confirm the units authenticity. Each AdderView Secure unit has a unique identity code configured within their circuitry. On request, Adder can provide you with an Authentication Certificate. AdderView Analogue Enhanced Secure switch checks its own operation The hardware and software must agree before data flow is enabled. The switch constantly checks its own operation and will stop operating and flash its error light if an unanticipated event occurs. Minimal emissions profile - 80dB crosstalk isolation The AdderView Analogue Enhanced Secure switch is heavily shielded with double shielding in critical areas to minimize the risk of eavesdropping equipment being able to pick up signals from the equipment. The switch boasts an amazingly high level of electrical crosstalk isolation that is greater than 80dB, giving further peace of mind. No shared RAM between ports The keyboard and mouse processor is powered down and reset at each switchover to thwart shared RAM leakages. Separate memories hold the num, caps and scroll states and are only accessible when the relevant channel is selected. All data buffers are actively cleared once they have been used. Secure USB function The USB ports will only support keyboards, mice and SmartCard / Common Access Cards (CAC). Other devices, such as USB storage drives, are actively prohibited. Independent power supplies block power line signalling The circuitry for each port is independently powered from the USB lead. Power line signaling is therefore blocked because different port circuits don't share the same power feed. Uni-directional data paths for keyboard and mouse One-way data paths ensure that data isolation does not rely on trusting microprocessor software, but is instead assured by hardware and prevents a hidden software weaknesses that could potentially cause data leakage. A unidirectional structure also protects against timing analysis or forced malfunction attacks and prevents computers influencing the operation of any common circuitry.