Firma: Arvutitark OÜ

The Eisbaer LT Aurora CPU AIO water cooler offers extremely good cooling performance due to the high-end components, which includes a full copper radiator. The components used are all from Alphacool’s classic custom water cooling sector and can also be found in its enterprise products for servers. The Eisbaer LT Aurora can be expanded with additional components thanks to the quick-release fastener. At its heart, the DC-LT 2 pump The exceedingly small and compact DC-LT 2 pump has been further optimized compared to its predecessor. The impeller sits suspended on a ceramic axle and is supported by two magnets. A 3-phase sinusoidal drive ensures a much smoother running of the pump, which significantly contributes to minimizing noise. The pump offers enough power to add another component, such as a GPU water cooler or another radiator, to the loop. Ideally, it is coupled with an Eiswolf 2 GPU AIO water cooler. This also uses a DC-LT 2 pump. DIY fittings and ES tubing The tubing and fittings come from the standard custom cooling segment and all use a standard G1/4" thread. Therefore, it is extremely easy to replace them. The black TPV hose comes, like the connectors, from the Alphacool ES series which is primarily installed in servers and workstations. The hose does not contain any plasticizers and, unlike classic PVC hoses, does not deform at high temperatures. The quick connector is not made of heavy brass, but of extremely light, durable and, robust nylon. The quick connector is compatible with many other models from the Alphacool product line. Cooler As with all Alphacool products, the cooler base is made of nickel-plated copper and is equipped with exceptionally fine cooling fins that are distributed over almost the entire base. A flow plate provides an accelerated flow over the cooling fins which increases the cooling performance. The water flow is optimized so that all areas of the cooler base are cooled evenly. Full Digital RGB Mounting The pump unit and fans are fully equipped with Digital RGB LEDs, also known as Addressable RGB or aRGB. Extensive effects can be set with the included controller or with the Digital RGB controller on the motherboard. For a nice visual effect, there is an illuminated polar bear (Eisbaer). For easier control via a controller, the fans and also the pumps can be connected in series via daisy-chain. This ensures a clean wiring of the individual LED components. Compatibility: Compatibility Intel 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 Compatibility AMD AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5 / TR4 / sTRX4 / sWRX / SP3 Technical Data Radiator L x W x H 390 x 120 x 25 mm (+/- 3%) Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 2x G1/4" Possible fan size 120mm Possible fan assembly 3x one-sided / 6x both-sided Technical Data cooler with pump L x W x H 69 x 69 x 45 mm Material cooler bottom nickel plated copper Material cooler top PMMA Threads 2x G1/4“ (+ 1x Fillport G1/4“) Pump type DC-LT2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow rate 75 L/h Voltage 12V DC Power consumption 4W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 destilled water (CAS-Nummer 7732-18-5) Ingredient 2 Glysantin (CAS-Nummer 1017-21-1) Working temperatures 15C°/+90°C Technical data quick-release coupling Dimensions 95 x 27 mm Material Nylon Tube size 12,7/7,6 mm Color black Technical data connectors Dimensions (connection straight) 24 x 18 mm Quantity (connection straight) 2x Dimensions (connection 90°) 35 x 27 x 17 mm Quantity (connection 90°) 2x Tube size 12,7/7,6 mm Material brass Technical data tube Length 40 cm Material TPV (EPDM/PP) Color black Tube size 12,7/7,6 mm Hardness grade 35 Shore-A to 50 Shore-D Maximum working temperature -50 bis +155°C Technical data fans Speed 800 - 2000 RPM Static pressure 2,0 mm/H₂O Air flow rate 104,49 m³/h Bearing Hydraulic Connection 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V L x W x H 120 x 120 x 25 mm Cable length 187 g Voltage 60 °C

With the Alphacool Eisbaer LT, you get a high-performance compact water cooling system that’s barely inferior to its bigger brother, the Eisbaer AIO. Just like the Eisbaer, the Eisbaer LT distinguishes itself from the usual AIO mix in that Alphacool relied on normal custom components as much as possible during development. This allows the Eisbaer LT to be expanded on not just with the Eisbaer Ready quick connectors but also with connectors using standard G1/4” threads. These can be replaced with other models at any time. Another highlight is the new 25mm thin Slim Radiator, made entirely of copper. Since copper has twice the heat capacity of aluminium, optimal cooling is guaranteed. Cooler and pump The cooler bottom is made entirely of copper and has an ultra-fine cross slot structure. Thanks to those cross slots and a sophisticated nozzle system, heat is absorbed extremely fast and transferred away from the CPU. The built-in DC-LT 2 Ceramic pump is an extremely quiet pump that Alphacool has used in many products. The pump is much stronger than what you’d usually find in AIOs. It can also be throttled with the optional 7V adaptor, decreasing the already low noise generation even further. The pump casing is very flat and the aluminium cap gives it a clean, elegant look. Fittings Alphacool relies on the standard DIY fittings you’d find in any standard water cooling system. Components are made entirely of high-quality brass and use a G1/4” thread. This means fittings can be exchanged easily, just like in a standard system. Maybe you want different tubing or want to switch over to HardTubes – your options are wide open. Quick connectors The Eisbaer LT’s quick connectors make it compatible with all other Eisbaer Ready products, like the Eiswolf GPX-Pro cooler or the Eiswand external radiator. Both products use the same pump – perfect for quickly and easily expanding the cooling loop. Alternatively, you can use the Extension Set or Alphacool HF Quick Connectors (available separately) to integrate other components into the system. Tubing The compact but standard 11/8mm tubing size was Alphacool’s go-to here. The tubing uses anti-kink springs in order to prevent kinks in the tubing. This makes it easy to lay tubing even in tight spaces, meaning the Eisbaer LT is easy to install even in compact cases. Radiator Alphacool has integrated a brand-new 25mm-thin Ultra-Slim Radiator. Unlike most AIO systems, Alphacool’s radiator is not made of cheap aluminium, but rather high-quality copper. With twice the heat capacity, copper significantly increases the radiator’s cooling performance. This is especially noticeable when you reach the performance limits of a radiator. While temperatures in aluminium radiators progressively rise fairly early, copper radiators can keep the temperature stable for much longer. Fans The Eiswind fans were specially designed for use in radiators and provide very high static pressure to force cool air through the radiator’s cooling fins. Both fans can be regulated via PWM over an enormous range of 550 to 1700 RPM. A PWM Y-adapter is included with the Eisbaer LT, so both fans can be connected to a PWM connection on your motherboard or a separate fan controller. At first glance, the Eisbaer LT looks like a typical CPU AIO solution, but a closer look elevates the Eisbaer LT far above the competition. Thanks to its copper radiator and cooling block, its cooling power is enormous, and the quick connectors and custom water cooling components make it easy to expand on. On top of that, you have product options that can connect to the Eisbaer LT without needing to be refilled at all – such as external radiators, prefilled radiators, and graphics card coolers. The portfolio is constantly expanding. Compatibility: Compatibility Intel 775 /1156 / 1155 / 1150 / 1151 / 1366 / 2011 / 2011-3 / 2066 / 604 / 771 Compatibility AMD 54 / 939 / AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5 / FM1 / FM2 / FM2+ / 940 / C32 / G34 / optional TR4 Technical Data Radiator Triple 120 mm L x W x H 390 x 120 x 25 mm Material 100% copper Technical data fans Eiswind 3x Bearing Sleeve Bearing Voltage 12V DC Power connector 4-Pin PWM Rated speed (rpm) 550 - 1700 (+/-10%) Air pressure 1,66 mm H2O Fan efficiency 63,85 cfm / 108m³/h Volume 29 dB(A) Technical data CPU cooler L x W x H 69 x 69 x 39 mm Cooler bottom dimensions 56 x 56 x 3 mm Cooler bottom material Nickel-plated copper Threads 3x G1/4" (Inlet, Outlet, Fillport) Technical data pump DC-LT 2 Ceramic 12V DC Rated speed (rpm) 2600 Voltage range 7- 13,5V DC Power consumption 4W Flow rate 75L/h Maximum head 0,95 m Power connection 3-Pin Technical data tube Length 32 cm, including anti-kink springs Diameter 11/8 mm Material PVC 2 quick connectors L x W 83 x 28 mm pre-installed

Asus ZenScreen OLED MQ13AH 13.3 ", FHD, 1920 x 1080, 16:9, 1 ms, 400 cd/m², 60 Hz, HDMI ports quantity 1x Mini HDMI

The new Alphacool Eisblock XPX Aurora Edge CPU water cooler offers fantastic performance thanks to the patented ramp design as well as boasting excellent quality. The new Aurora design in combination with the addressable digital RGB illumination offers many possibilities for outstanding illumination of the CPU water block. Performance in abundance! Alphacool already developed and patented new flow technology for the first Alphacool Eisblock XPX series. The so-called "ramp system" ensures an even flow of water inside the cooler and sits in front of the diffuser plate. This ensures that the water is pressed evenly through the diffuser plate, which in turn pushes the water evenly over the cooling base. The cooling channels on the CPU cooler base has also been enlarged to a proud 34 x 32 mm to accommodate the ever-growing CPU DIEs. This is especially true for multi-core processors with 4, 6, 8 or even 12 and more CPU cores. So that the heat from the CPU can be transferred to the water as quickly as possible. 81 cooling fins can be found on the cooling plate to ensure maximum heat diffusion. The fin structure has been reduced to just 0.2 mm in order to create the largest possible surface area in the smallest possible space. And the lighting? All new Eisblock XPX Aurora Edge CPU waterblocks come with addressable digital RGB lighting. The aRGB LEDs are integrated directly into the CPU water cooler and run once around the entire cooling block. With up to 15 digital RGB LEDs the entire CPU block is evenly and Intensively lit. Of course, the brightness can be controlled by an appropriate controller. And as with all aRGB LED products all known effects can be created. From simple colour changes to wave effects and rainbow lighting, everything is possible. Of course, the Alphacool Eisblock Aurora coolers can also be connected and controlled via mainboards using the standard 3-pin 5V connector. The cable also has an integrated Y-adapter. This makes it easy to connect further Alphacool Aurora products in series without having to order separate Y-adapters. Extension cables may be needed if you want to connect the products in series, depending on the size of the case. Is installation difficult? Mounting the XPX Aurora Edge Eisblock cooler is simple. The backplate is simply attached to the mainboard from behind. The mounting frame for the AMD or Intel socket is clamped to the cooler and the corresponding mounting screws are pre-attached to this frame. Next, you simply apply thermal paste and you attach the cooler using the screws. Please note: Remove the protective foil on the cooler base before use! Unique Aurora Design The Alphacool Eisblock Aurora Edge has been significantly changed in some points to its predecessor, the Eisblock XPX. The lower part of the cooler is completely made of brass and no longer of Acrylglass or transparent nylon. This changes the overall feel and quality of the cooler. Not only is it heavier in the hand, but it is also much more stable than the usual Acryl CPU water coolers. In order to stand out visually from the normal Eisblock XPX Aurora CPU water cooler, the bottom of the cooler was kept completely in black. This emphasizes the visual effect of the water flow. The corners of the CPU cooler are more angular, which makes the cooler stand out from the normal Aurora Acryl Eisblock. Compatibility: Compatibility Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 2011 / 2011-3 / 2066 / 1700 AMD Compatibility: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5 Technical data GPU cooler W x T x H 70 x 70 x 32,5 mm Net weight 407 g Max working temperature 60 °C Material cooler nickel plated copper Material bottom part brass Material top Acryl Threads 2 x G1/4“ Power supply Digital RGB 3-Pin 5V Pressure tested 0,8 bar Certificates CE, FC, ROHS

The Alphacool Eisblock Aurora GPX-A AMD Radeon RX 5700 XT Asrock Taichi X8 8G OC backplate is the perfect partner for the Eisblock Aurora Plexi GPX-A AMD Radeon RX 5700 XT Asrock Taichi X8 8G OC GPU water cooler. The design has been kept simple but nevertheless, the appearance is anything but boring due to fine design features. The sleek lines and the discreet Alphacool logo reflect the basic design of the Alphacool Eisblock Aurora cooler. The backplate is not only an optical highlight, it also stabilizes the PCB of the graphics card. This drastically reduces the high tensile force of the mounting screws on the PCB of the graphics card. This ensures a higher level of safety when mounting the Alphacool Eisblock Aurora Water Cooler. Important: The backplate is only compatible with the Alphacool Eisblock Aurora Plexi GPX-A AMD Radeon RX 5700 XT Asrock Taichi X8 8G OC . Technical Data: Dimensions: 270 x 119 mm Download Manual PDF: Alphacool Eisblock Aurora Backplate GPX-A AMD Radeon RX 5700 XT Asrock Taichi X8 8G OC

The new Alphacool Eisblock XPX Aurora Edge CPU water cooler offers fantastic performance thanks to the patented ramp design as well as boasting excellent quality. The new Aurora design in combination with the addressable digital RGB illumination offers many possibilities for outstanding illumination of the CPU water block. Performance in abundance! Alphacool already developed and patented new flow technology for the first Alphacool Eisblock XPX series. The so-called "ramp system" ensures an even flow of water inside the cooler and sits in front of the diffuser plate. This ensures that the water is pressed evenly through the diffuser plate, which in turn pushes the water evenly over the cooling base. The cooling channels on the CPU cooler base has also been enlarged to a proud 34 x 32 mm to accommodate the ever-growing CPU DIEs. This is especially true for multi-core processors with 4, 6, 8 or even 12 and more CPU cores. So that the heat from the CPU can be transferred to the water as quickly as possible. 81 cooling fins can be found on the cooling plate to ensure maximum heat diffusion. The fin structure has been reduced to just 0.2 mm in order to create the largest possible surface area in the smallest possible space. And the lighting? All new Eisblock XPX Aurora Edge CPU waterblocks come with addressable digital RGB lighting. The aRGB LEDs are integrated directly into the CPU water cooler and run once around the entire cooling block. With up to 15 digital RGB LEDs the entire CPU block is evenly and Intensively lit. Of course, the brightness can be controlled by an appropriate controller. And as with all aRGB LED products all known effects can be created. From simple colour changes to wave effects and rainbow lighting, everything is possible. Of course, the Alphacool Eisblock Aurora coolers can also be connected and controlled via mainboards using the standard 3-pin 5V connector. The cable also has an integrated Y-adapter. This makes it easy to connect further Alphacool Aurora products in series without having to order separate Y-adapters. Extension cables may be needed if you want to connect the products in series, depending on the size of the case. Is installation difficult? Mounting the XPX Aurora Edge Eisblock cooler is simple. The backplate is simply attached to the mainboard from behind. The mounting frame for the AMD or Intel socket is clamped to the cooler and the corresponding mounting screws are pre-attached to this frame. Next, you simply apply thermal paste and you attach the cooler using the screws. Please note: Remove the protective foil on the cooler base before use! Unique Aurora Design The Alphacool Eisblock Aurora Edge has been significantly changed in some points to its predecessor, the Eisblock XPX. The lower part of the cooler is completely made of brass and no longer of Acrylglass or transparent nylon. This changes the overall feel and quality of the cooler. Not only is it heavier in the hand, but it is also much more stable than the usual Acryl CPU water coolers. In order to stand out visually from the normal Eisblock XPX Aurora CPU water cooler, the bottom of the cooler was kept completely in black. This emphasizes the visual effect of the water flow. The corners of the CPU cooler are more angular, which makes the cooler stand out from the normal Aurora Acryl Eisblock. Compatibility: Compatibility Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 2011 / 2011-3 / 2066 / 1700 AMD Compatibility: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5 Technical data GPU cooler W x T x H 70 x 70 x 32,5 mm Net weight 407 g Max working temperature 60 °C Material cooler nickel plated copper Material bottom part brass Material top Acryl Threads 2 x G1/4“ Power supply Digital RGB 3-Pin 5V Pressure tested 0,8 bar Certificates CE, FC, ROHS

The new generation of Alphacool GPU coolers has arrived! The Alphacool Eisblock Aurora Plexi GPX combines outstanding performance with breath-taking aesthetics. What has changed? This is where Alphacool's 16 years of experience pays off! The already powerful Eisblocks have been further optimized: A new look, thinner thermal pads (1mm), a thinner copper block (5.5mm) and a significantly improved flow rate are just some of the important changes. And the design? This time Alphacool puts the lighting more in the foreground! Along the entire cooling block there are addressable digital RGB LEDs, so that no corner of your case remains in the dark. The more angular design compared to its predecessors further enhances this effect. What else? There have been no compromises with the materials and the cooling block is still 100% copper. Now however, the nickel-plating of the cooler has been further optimised. This increases acid resistance and almost eliminates the risk of chipping the nickel-plating. A further highlight is the use of the patented Alphacool stop plugs: These sit flush with the surface of the cooler and form a flat surface when screwed in. No more annoying protruding stop fittings! Finally, the branding of the Eisblock has been adapted. It is now much more discreet and fits perfectly into the already elegant appearance. With this product Alphacool has once again proven its technical know-how! Check it out for yourself and let your system shine in a new light! Technical Details: W x T x H: 144 x 269,5 x 25 mm Max Working Temperature: 60 °C Material Cooler: Nickel-Plated Copper Material Top: Plexiglass Threads: 4x G1/4“ Power Supply Digital RGB: 3-Pin 5V (0,5A) Pressure Tested: 1,5 bar Compatibility: ASRock Radeon RX 5700 XT TAICHI X 8G OC+, 8GB GDDR6, 2x HDMI, 4x DisplayPort Graphics Card Configurator: Click here! List of Compatibility: AMD Cooler PDF Manual: Eisblock Aurora Plexi GPX-A AMD Radeon RX 5700 XT Asrock Taichi X8 8G OC PDF Data Sheet: Eisblock Aurora Plexi GPX-A AMD Radeon RX 5700 XT Asrock Taichi X8 8G OC

With the Alphacool XPX Aurora Pro Eisblock, Alphacool offers a CPU water cooler specially designed for processors with particularly large processor cores. These currently include the AMD Threadripper models and processors from Intel for the LGA 2066 socket and the LGA 3647 server socket in narrow ILM design. As a CPU cooler from the Aurora Design line, the CPU cooler naturally offers integrated digital aRGB lighting. Extremely powerful The cooler base has been specially optimized for the large processor cores. With an area of 42 x 58.6 mm and 147 cooling fins the cooling area has been significantly increased. As a comparison, an Alphacool XPX Aurora Eisblock has 81 cooling fins to completely cover the processor core of a normal CPU. Both coolers use the same fin type with a thickness of only 0.2 mm. This clearly shows how far Alphacool has gone to offer the best possible performance. The entire cooler base is of course made of nickel-plated copper and not aluminium. This is due to the increased thermal conductivity of copper. It is almost twice as high as that of aluminium. How is the CPU cooler illuminated? As with all new Eisblock CPU water coolers, Alphacool relies on an integrated aRGB solution. An aluminium frame is flush with the CPU cooler. Of course, the aluminium does not come into contact with the water. The LED frame contains up to 14 addressable digital RGB LEDs. This is more than enough to illuminate the entire cooler even and brightly. The intensity of the illumination can of course be controlled by an appropriate controller. Due to the use of digital RGB LEDs, all known effects can be created, because each LED can be controlled separately with the right controller. The Alphacool Eisblock Aurora Pro cooler can also be connected and controlled via the 3-pin 5V connector on any compatible mainboard. The cable also has an integrated Y-adapter. This makes it easy to connect further Alphacool Aurora products in series without having to order separate Y-adapters. Only additional extension cables may be needed if you want to connect the products in series. Is the assembly difficult? Installation is child's play. Remove the protective film from the base of the cooler, apply some of the enclosed thermal paste to the CPU and then attach the cooler to the board. Depending on the base, the mounting screws are either screwed on before or after mounting. No tools are necessary for the assembly. Alphacool uses knurled screws, which allow a quick and easy assembly. Finally Acryl! The Alphacool Eisblock XPX Aurora Pro is the technical brother of the Eisblock XPX Pro 1U cooler, which was developed especially for the use in server housings. During the development the functionality had a much higher priority than the design, which was kept practical and discreet. The Eisblock XPX Aurora Pro has been optically adapted to the Aurora products and now offers the same design features as you are used to from the Aurora series. This allows you to perfectly match your entire system to each other optically and you don't have to make any compromises. Thanks to the plexiglass look, you can see the water flow beautifully. On the Plexi there is a black frame embedded with a very discreet Alphacool logo in one corner. Compatibility: Compatibility Intel: 2011 / 2011-3 / 2066 / 3647 / 1700 AMD Compatibility: TR4 / TRX40 / sWRX8 / SP3 / AM4 / AM5 Technical data GPU cooler W x T x H 79 x 63,8 x 31 mm Net weight 545 g Max working temperature 60 °C Material cooler nickel plated copper Material bottom part brass Material top Acryl Threads 2 x G1/4“ Power supply Digital RGB 3-Pin 5V Pressure tested 0,8 bar Certificates CE, FC, ROHS

With the Alphacool XPX Aurora Pro Eisblock, Alphacool offers a CPU water cooler specially designed for processors with particularly large processor cores. These currently include the AMD Threadripper models and processors from Intel for the LGA 2066 socket and the LGA 3647 server socket in narrow ILM design. As a CPU cooler from the Aurora Design line, the CPU cooler naturally offers integrated digital aRGB lighting. Extremely powerful The cooler base has been specially optimized for the large processor cores. With an area of 42 x 58.6 mm and 147 cooling fins the cooling area has been significantly increased. As a comparison, an Alphacool XPX Aurora Eisblock has 81 cooling fins to completely cover the processor core of a normal CPU. Both coolers use the same fin type with a thickness of only 0.2 mm. This clearly shows how far Alphacool has gone to offer the best possible performance. The entire cooler base is of course made of nickel-plated copper and not aluminium. This is due to the increased thermal conductivity of copper. It is almost twice as high as that of aluminium. How is the CPU cooler illuminated? As with all new Eisblock CPU water coolers, Alphacool relies on an integrated aRGB solution. An aluminium frame is flush with the CPU cooler. Of course, the aluminium does not come into contact with the water. The LED frame contains up to 14 addressable digital RGB LEDs. This is more than enough to illuminate the entire cooler even and brightly. The intensity of the illumination can of course be controlled by an appropriate controller. Due to the use of digital RGB LEDs, all known effects can be created, because each LED can be controlled separately with the right controller. The Alphacool Eisblock Aurora Pro cooler can also be connected and controlled via the 3-pin 5V connector on any compatible mainboard. The cable also has an integrated Y-adapter. This makes it easy to connect further Alphacool Aurora products in series without having to order separate Y-adapters. Only additional extension cables may be needed if you want to connect the products in series. Is the assembly difficult? Installation is child's play. Remove the protective film from the base of the cooler, apply some of the enclosed thermal paste to the CPU and then attach the cooler to the board. Depending on the base, the mounting screws are either screwed on before or after mounting. No tools are necessary for the assembly. Alphacool uses knurled screws, which allow a quick and easy assembly. Finally Acryl! The Alphacool Eisblock XPX Aurora Pro is the technical brother of the Eisblock XPX Pro 1U cooler, which was developed especially for the use in server housings. During the development the functionality had a much higher priority than the design, which was kept practical and discreet. The Eisblock XPX Aurora Pro has been optically adapted to the Aurora products and now offers the same design features as you are used to from the Aurora series. This allows you to perfectly match your entire system to each other optically and you don't have to make any compromises. Thanks to the plexiglass look, you can see the water flow beautifully. On the Plexi there is a black frame embedded with a very discreet Alphacool logo in one corner. Compatibility: Compatibility Intel: 2011 / 2011-3 / 2066 / 3647 / 1700 AMD Compatibility: TR4 / TRX40 / sWRX8 / SP3 / AM4 / AM5 Technical data GPU cooler W x T x H 79 x 63,8 x 31 mm Net weight 545 g Max working temperature 60 °C Material cooler nickel plated copper Material bottom part brass Material top Acryl Threads 2 x G1/4“ Power supply Digital RGB 3-Pin 5V Pressure tested 0,8 bar Certificates CE, FC, ROHS

The new generation of Alphacool GPU coolers has arrived! The Alphacool Eisblock Aurora Plexi GPX combines outstanding performance with breath-taking aesthetics. What has changed? This is where Alphacool's 16 years of experience pays off! The already powerful Eisblocks have been further optimized: A new look, thinner thermal pads (1mm), a thinner copper block (5.5mm) and a significantly improved flow rate are just some of the important changes. And the design? This time Alphacool puts the lighting more in the foreground! Along the entire cooling block there are addressable digital RGB LEDs, so that no corner of your case remains in the dark. The more angular design compared to its predecessors further enhances this effect. What else? There have been no compromises with the materials and the cooling block is still 100% copper. Now however, the nickel-plating of the cooler has been further optimised. This increases acid resistance and almost eliminates the risk of chipping the nickel-plating. A further highlight is the use of the patented Alphacool stop plugs: These sit flush with the surface of the cooler and form a flat surface when screwed in. No more annoying protruding stop fittings! Finally, the branding of the Eisblock has been adapted. It is now much more discreet and fits perfectly into the already elegant appearance. With this product Alphacool has once again proven its technical know-how! Check it out for yourself and let your system shine in a new light! Technical Details: W x T x H: 122 x 266,5 x 25 mm Max Working Temperature: 60 °C Material Cooler: Nickel-Plated Copper Material Top: Plexiglass Threads: 4x G1/4“ Power Supply Digital RGB: 3-Pin 5V (0,5A) Pressure Tested: 1,5 bar Compatibility: AMD Radeon RX 5700 XT XFX Thicc II / III Graphics Card Configurator: Click here! List of Compatibility: AMD Cooler PDF Manual: Alphacool Eisblock Aurora Plexi GPX-A AMD Radeon RX 5700 XT XFX Thicc II / III PDF Data Sheet: Alphacool Eisblock Aurora Plexi GPX-A AMD Radeon RX 5700 XT XFX Thicc II / III

The Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6700XT Gaming X combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the Eisblock Aurora Acryl GPX-A Radeon RX 6700XT Gaming X graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora Acryl GPX-A Radeon RX 6700XT Gaming X cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Eisblock Aurora Acryl GPX-A Radeon RX 6700XT Gaming X cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Eisblock Aurora Acryl GPX-A Radeon RX 6700XT Gaming X, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora Acryl GPX-A Radeon RX 6700XT Gaming X also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6700XT Gaming X is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data cooler L x W x H 246,38 x 141,75 x 26,6 mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4“ Thickness cooling fins 0,6 mm Illumination Digital RGB LEDs Power connector Digital RGB LEDs 3-Pin JST Power Digital RGB LEDs 5V Technical data backplate L x W x H 246,38 x 117,25 x 6 mm Material Aluminium Color Black Compatibility list: - MSI Radeon RX 6700 XT Gaming X 12G, 12GB GDDR6, HDMI, 3x DP (V398-007R) Downloads: Datasheet PDF | Manual PDF | AMD List of Compatibility PDF Links: Graphics Card Configurator

The D-Plug from Alphacool's ENTERPRISE SOLUTIONS series with 2 G1/4" male threads offers the possibility to connect components like GPU and CPU coolers or radiators within a water circuit. What's New? Compared to double nipples or similar adapters, the ES D-Plug is plugged and not screwed. The necessary stability is provided by two closely fitting O-rings on the Male component of the connector. Of course, the connector has been extensively tested in the Alphacool lab with the result that the D-Plug is stable up to 1.5 Bar. Uses Alphacool's ES D-Plug allows for easy connection of water cooling components such as graphics card and CPU coolers or radiators to each other. Since the connector is only plugged in and not screwed, easy installation or quick replacement are uncomplicated. The ES D-Plug has a variable length. By pulling the connector apart, an extension of up to 15 mm can be achieved. This flexibility allows compensation for inaccuracies in the system design and prevents hoses from twisting during assembly. With the use of the D-Plug, the connection of water cooling elements is possible even in the tightest spaces. The right size for every application The ES D-Plug is available in lengths of 20 mm, 25.5 mm and 31.5 mm. They come in multiple colors such as brilliant chrome or matte black. Replacement O-rings in three different colors are included. Application notes To ensure the required stability and tightness of the connection, both O-rings of the Male component must be fully recessed in the Female component. Technical data Material Brass Color Black Length 25,5 mm Diameter 20 mm Thread G1/4“ OT Thread length (incl. O-ring) 5 mm Weight 44 g Pressure tested 1,5 Bar

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Compatibility: - NVIDIA GeForce RTX 3070 Ti Founders Edition, 8GB GDDR6X, HDMI, 3x DP Technical data cooler L x W x H 187,97 x 123,09 x 33,95 mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 11 Technical data backplate L x W x H 187,97 x 98,59 x 6 mm Material aluminium Color black

Stylisher Midi-Tower in Weiß, Seitenteil aus Tempered Glass, optimiert für Luftkühlung, mit Schalldämmung, bis zu 435 mm lange Grafikkarten, großer Wakü-Support und drei vorinstallierte Fans

The Alphacool Aurora Acryl GPX-N RTX 3080/3090 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3080/3090 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3080/3090 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3080/3090 Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3080/3090 Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3080/3090 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3080/3090 Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data: L x W x H: 146 x 269,5 x 25 mm Material cooler: Nickle-plated copper Material cooler top: Acryl Threads: 4 x G1/4“ Thickness cooling fins: 0,6 mm Illumination: Digital RGB LEDs Power connector Digital RGB LEDs: 3-Pin JST Power Digital RGB LEDs: 5V Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards Compatibility : RTX 3080TI Gigabyte Aorus GeForce RTX 3080 Ti Xtreme 12GB (GV-N308TAORUS X-12GD) Gigabyte Aorus GeForce RTX 3080 Ti Master 12GB (GV-N308TAORUS M-12GD) RTX 3080 Gigabyte Aorus GeForce RTX 3080 Master 10G, 10GB GDDR6X, 3x HDMI, 3x DP (GV-N3080AORUS M-10GD) Gigabyte Aorus GeForce RTX 3080 Xtreme 10G, 10GB GDDR6X, 3x HDMI, 3x DP (GV-N3080AORUS X-10GD) RTX 3090 Gigabyte Aorus GeForce RTX 3090 Master 24G, 24GB GDDR6X, 3x HDMI, 3x DP (GV-N3090AORUS M-24GD) Gigabyte Aorus GeForce RTX 3090 Xtreme 24G, 24GB GDDR6X, 3x HDMI, 3x DP (GV-N3090AORUS X-24GD) Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 Aorus Master Xtreme with Backplate Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 Aorus Master Xtreme with Backplate

The Alphacool Aurora Acryl GPX-N RTX 3070 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3070 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3070 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3070 Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3070 Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3070 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3070 Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data: L x W x H:128 x 185 x 24,5 mm Material cooler: Nickle-plated copper Material cooler top: Acryl Threads: 4 x G1/4“ Thickness cooling fins: 0,6 mm Illumination: Digital RGB LEDs Power connector Digital RGB LEDs: 3-Pin JST Power Digital RGB LEDs: 5V Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards Compatibility : - Zotac Gaming GeForce RTX 3070 Twin Edge OC, 8GB GDDR6, HDMI, 3x DP (ZT-A30700H-10P) - Zotac Gaming GeForce RTX 3070 Twin Edge, 8GB GDDR6, HDMI, 3x DP (ZT-A30700E-10P) Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 Gaming Twin Edge with Backplate Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 Gaming Twin Edge with Backplate

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital RGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Technical data cooler L x W x H 184,58 x 127,1 x 23,55 mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Illumination digital RGB LEDs Power connector digital RGB LEDs 3-Pin JST Power digital RGB LEDs 5V Technical data backplate L x W x H 184,58 x 102,6 x 6 mm Material aluminium Color black Compatibility: Zotac Gaming GeForce RTX 3070 Ti AMP Holo (ZT-A30710F-10P) Zotac Gaming GeForce RTX 3070 Ti Trinity OC (ZT-A30710J-10P) Zotac Gaming GeForce RTX 3070 Ti Trinity (ZT-A30710D-10P)

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Compatibility: - NVIDIA GeForce RTX 3090 Ti Founders Edition Technical data cooler L x W x H 220,5 x 146,40 x 23,35 mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 11 Maximum working temperature 60 °C Pressure tested 0,8 Bar Technical data backplate L x W x H 220 x 121,4 x 6 mm Material aluminium Color black

Enjoy high-speed file transfer without the need to connect via Wi-Fi. Created with the Insta360 X3 in mind, the Quick Reader can act as the camera´s external memory - just insert a microSD card (not included). This ensures that you won´t run out of space for your videos! When you´re done recording, connect the accessory to your phone and conveniently copy selected footage. The camera doesn´t need to be turned on at that time, which will help you save its battery power. The Quick Reader supports Plug&Play and provides a fast, stаble connection. What´s more, it is equipped with 2 connectors - USB-C and Lightning, which means it is compatible with Android and iOS devices. Now uploading and editing content will become even easier!

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Compatibility: - NVIDIA GeForce RTX 3090 Ti Founders Edition Technical data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump L x W x H 220,5 x 156,05 x 46mm Material cooler bottom Nickel plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95m Maximum flow rate 75 L/h Voltage 12V DC Power consumption 4W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners L x D 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25mm Net weight 187g Max working temperature 60°C

The HP Spectre 16 360° is a high-performance laptop featuring a 16-inch IPS touchscreen with a resolution of 3072 x 1920 and a 60Hz refresh rate. It is powered by a 12th Gen Intel® Core™ i7-1260P processor with 12 cores, 16 threads, and a boost up to 4.7GHz, alongside an Intel Arc A370M GPU. This laptop comes with 16GB of DDR4 RAM at 3200MHz and a 1TB SSD, providing ample storage and speed for demanding applications. It runs on Windows 11 Pro and comes in a sleek black finish, making it a versatile and powerful choice for professionals and creatives alike.

DDR5 5600 CL40

This back plate is manufactured from massive aluminum and can be mounted in addition to a kryographics NEXT RTX 3080 Strix / RTX 3090 Strix water block, giving additional stability especially in the voltage regulator area of the graphics card. Additionally, the RAM modules on the back of the RTX 3090 Strix graphics card are cooled effectively. The back plate is anodized in black color. Scope of delivery: One Back plate Thermal conductive pads Mounting material Compatibility: Please check compatibility using the PDF from Aqua Computer under Awards and Documents. Please note: Graphics card and kryographics water block are not included in delivery, please order separately.

Ekraani suurus:15.6; Operatiivmälu maht:16; Protsessori sagedus:3.5 GHz; Ekraani tüüp:OLED; Kõvaketta tüüp:SSD; Videokaardi mudel:NVIDIA GeForce RTX 3070Ti; SSD kõvaketta maht:1 TB; Operatsioonisüsteemi tüüp:Microsoft Windows 11 Home

operatsioonisüsteem provided: Windows 11 Pro Display diagonal, ": 15.6 Total Mälumaht: 512 GB SSD Protsessor perekond: Intel Core i5 Internal memory: 8 GB Graphic adapter: Intel UHD Graphics Connections: Audio (3.5mm) Connections: HDMI 1.4 Connections: DC-in Connections: USB-A (USB 2.0) Connections: USB-A (USB 3.2 Gen1) Connections: USB-C (USB 3.2 Gen1) Maksimum internal memory, GB: 8 kaal, g: 1800 Protsessor model: Intel Core i5-1135G7 (Max. 4.20 GHz, 8M, 4C) Protsessor cores: 4 Protsessor manufacturer: Intel Protsessor Protsessori kiirus, GHz: 2.40 Graphics adapter perekond: Intel UHD Graphics Internal mälu tüüp: DDR4 Intel Virtualization tehnoloogia: VT-x / VT-d aku maht, Wh: 37 Dedicated videokaardi mälu (GB): Uses system memory Intel Turbo Boost, GHz: 4.20 mõõtmed W x D x H, mm: 360 x 235 x 199 HDMI ports quantity: 1 Intel Smart vahemälu, MB: 8 USB-A (USB 2.0) ports quantity: 2 USB-A (USB 3.2) ports quantity: 1 USB-C (USB 3.2) porttien määrä: 1 ekraani resolutsioon, pixels: 1920 x 1080 Touch sensitive screen: No Backlit klaviatuur: Yes numbriklaviatuur: Yes Näpujälje lugeja: No Mobile broadband: No Smart Kaardilugeja: No Docking: USB-C Docking: USB-A Glossy display: No integreeritud mälukaardilugeja: No Optical drive: No Bluetooth: Yes sisseehitatud kaamera: Yes Bluetooth version: 5.1 Sisseehitatud mikrofon: Yes Intel HyperThreading: Yes toiteplokk, W: 45 Wi-Fi: Yes Intel vPro: No WLAN type: Wi-Fi 5(802.11ac) sisseehitatud Kõlarid: Yes

Adler mahlapress Adler Citrus Juicer AD 4013W, 800W, valge

Lenovo sülearvuti GAMING 3 i5-12500H / 15.6" FHD (1920X1080) IPS 250NITS ANTI-GLARE, 120HZ / 16GB / 512SSD / RTX3050 TI / 4GB / W11 / ENG (must)

Kõik-ühes DJI droon; 20-megapiksline 1" CMOS sensor; 5.4K (5472×3078) 30p videosalvestus; Lennuaeg kuni 31 minutit; Ülikompaktne disain

Ideal for efficient replacement of corporate projectors, BenQ SH753+ delivers superior high brightness for effective visual communication in bright conference rooms and boardrooms. Comprehensively equipped for flexible installation, SH753+ can smoothly integrate into existing centrally managed display infrastructures and provide additional versatility through a wide range of wireless presentation options. Full HD 1920 x 1080 5000 ANSI lumen T/R 1.39-2.09, 1.5 X RJ45, RS232, HDMIx2 (MHL), USB A, audio out, speakers etc 2D Keystone, vertical & horizontal + - 30 degrees Finnish menu

Kiire, vaikne ja jahe. Uue generatsiooni Lenovo mänguriarvutil on jahutuse parendamiseks kasutusele võetud õhuavad klaviatuuris. Lenovole omasel klaviatuuril on meediumite juhtnupud ja numbriklahvistik. Kaablitega majandamine on lihtsustatud tänu portide asetusele tagapaneelil.

*Ekraan: 6,7” AMOLED 120Hz FHD IPS LCD. NFC. Küljel sõrmejäljelugeja. *Protsessor: Helio G99 6nm *RAM: 8GB (kuni 13GB). Sisemälu: 128GB *Kaamera: 50 Mpx Triple/ 2 Mpx, esikaamera: 16 Mpx. * Aku: 5000 mAh. 33W kiirlaadimine. * Android 12, XOS 10.6.

*Ekraan: 6,7” AMOLED 120Hz FHD IPS LCD. NFC. Küljel sõrmejäljelugeja. *Protsessor: Helio G99 6nm *RAM: 8GB (kuni 13GB). Sisemälu: 128GB *Kaamera: 50 Mpx Triple/ 2 Mpx, esikaamera: 16 Mpx. * Aku: 5000 mAh. 33W kiirlaadimine. * Android 12, XOS 10.6.

*Ekraan: 6,7” AMOLED 120Hz FHD IPS. NFC. Küljel sõrmejäljelugeja. Dual SIM *Protsessor: Helio G99 6nm *RAM: 8GB (kuni 13GB). Sisemälu: 128GB *Kaamera: 108 Mpx Triple/ 2Mpx, esikaamera: 16 Mpx. * Aku: 5000 mAh. 33W kiirlaadimine. * Android 12, XOS 10.6.

Intel B760 Express | LGA1700 | ATX | DDR5 Memory slots 4 | 4xPCI-Express 3.0 1x | 1xPCI-Express 4.0 16x | 2xM.2 | 1xHDMI | 1xDisplayPort | 4xUSB 2.0 | 1xUSB 3.2 | 1xUSB-C | 1xPS/2 | 1xRJ45 | 3xAudio port | SATA | USB 2.0 | USB 3.2 | Video Depending on CPU | LAN Gigabit | Audio | RAID SATA 0, 1, 5, 10 | TPM Header

GPU-Wasserkühler im Full-Block-Design, für RX 7900 XTX RE-Grafikkarten, Kühlkörper aus vernickeltem Kupfer, Deckel aus schwarzem Acetal, integrierte D-RGB-Beleuchtung

AMD Radeon Edition

All-in-One-Wasserkühler, für MSI MAG Z690 Torpedo Mainboard, für Intel LGA 1700 Sockel, Kühler aus vernickeltem Kupfer, Deckel aus transparentem Acryl, mit adressierbarer RGB-Beleuchtung

MITSU means High performance, proven, environmentally friendly Class A lithium-ion cells Actual declared capacity Much slower loss of nominal capacity than other cheaper substitutes Low susceptibility to spontaneous discharge No memory effect Factory-provided protection against overcharge and deep discharge, as well as against overvoltage OVP, overheating OTP, short circuit SCP and overcurrent OCP Reliable and long-lasting time between charge cycles 6-stage quality control Buying this laptop battery you also have the assurance that at the same time you care about the environment. The manufacturer works closely with organizations involved in environmental education, supporting selective collection and maximum recovery of waste. MITSU batteries are CE, ROHS and ISO9001 certified products.

IP-COM võrgud W36AP WLAN

Die Core-Produktserie von Alphacool zeichnet sich durch hochwertige Qualität, herausragende Leistung und einheitliche, funktionale Designsprache aus. Der Kern dieses Kühlers ist der Kupferkühler, der zusammen mit dem Abschlussterminal aus einem Stück Kupfer gefräst wird. Die feine Verarbeitung in Kombination mit der harten und widerstandsfähigen Verchromung des gesamten Kupferkühlers entspricht höchsten Qualitätsstandards. Die beiden integrierten G1/4"-Messinggewinde, die in Chrom belassen sind, heben sich optisch vom Terminal ab und sind einer der Kernpunkte der neuen Designsprache, die sich bei allen Produkten der Core-Serie zeigt. Die Aluminium-Backplate, die an das Design angepasst ist, bildet zusammen mit dem Terminal eine Einheit und überzeugt auf der Rückseite des Kühlers mit einer klaren und homogenen Optik. Die Beleuchtung besteht aus digital adressierbaren RGB-LEDs, die den gesamten Kühler gleichmäßig und gut ausleuchten. Die technische Weiterentwicklung zeigt sich beim Wasserzulauf zur Düsenplatte sowie bei der Optimierung der Jetplate selbst. Diese wurde auf Basis von vielen Simulationen und praktischen Tests in Zusammenarbeit mit Boardpartnern komplett neu gestaltet. Die Finnendicke und Abstände wurden verändert, die Kühlfläche vergrößert und der Wasserfluss auf die Kernkomponenten mit der größten Wärmeabgabe optimiert. Die beiliegenden speziellen Soft Wärmeleitpads mit bis zu 7 W/mK passen sich perfekt selbst kleinsten Toleranzen an.   Kompatibilität: - AMD Radeon RX 7900 XTX, 24GB GDDR6, HDMI, 2x DP, USB-C - ASUS Radeon RX 7900 XTX, RX7900XTX-24G, 24GB GDDR6, HDMI, 2x DP, USB-C (90YV0IT0-U0NM00) - ASRock Radeon RX 7900 XTX, 24GB GDDR6, HDMI, 2x DP, USB-C - Biostar Radeon RX 7900 XTX, 24GB GDDR6, HDMI, 2x DP, USB-C (VA7906AEF4) - GIGABYTE Radeon RX 7900 XTX 24G, 24GB GDDR6, HDMI, 2x DP, USB-C (GV-R79XTX-24GC-B) - PowerColor Radeon RX 7900 XTX, 24GB GDDR6, HDMI, 2x DP, USB-C (RX 7900 XTX 24G) - XFX Radeon RX 7900 XTX, 24GB GDDR6, HDMI, 2x DP, USB-C (RX-79XMBABF9)     Technische Daten Kühler Abmessungen (L x B x H) 269 x 135 x 32,15mm Material Kühlerboden verchromtes Kupfer Material Kühleroberseite Acryl Anschlüsse 4 x G1/4" Dicke Kühlerboden 11,3mm Dicke Kühlfinnen 0,4mm Abstand Kühlfinnen 0,4mm Beleuchtung digital aRGB LEDs Stromanschluss digital aRGB LEDs 3-Pin JST Spannung digital aRGB LEDs 5V Anzahl digital aRGB LEDs 15 Farbe transparent   Technische Daten Backplate Abmessungen (L x B x H) 269 x 221 x 5mm Material Aluminium Farbe schwarz    

IIYAMA GB2470HSU-B5 24inch ETE Fast IPS Gaming G-Master Red Eagle FreeSync Premium 1920x1080 165Hz 250cd/m