Firma: Arvutitark OÜ

This cable from Aquacomputer, is used for emergency shutdown of the computer in case of alarm. It is compatible with the Vision series and connects to the power button input of the main board without affecting the power button. Included in delivery: 1x cable (length 70cm) Compatible with the following devices: cuplex cryos NEXT with VISION VISION connection terminal for cryographics (23664, 23665, 23666, 23667) VISION Touch (53232, 53235) OCTO (53286) Note: Before connecting the cable, please make sure that the alarm output/tacho signal output of the corresponding device is configured correctly! Brief instructions: Settings for VISION devices (in aquasuite software): Tab "Alarm settings": Selection item "Power button (53216)" must be activated. Only then connect the alarm cable to the mainboard. Then check the correct function by provoking an alarm. If the PC does not switch off, turn the plug on the mainboard 180 degrees and repeat the test. During the emergency shutdown data can be lost because the operating system and open programs are not closed properly!

Protsessori klass: Intel Core i7Operatiivmälu (RAM): 16 GBGarantii: 2 yearArvuti tüüp: Töö;Õppimise, töö ja kodu jaoksKõvaketas (SSD): 480 GBOperatsioonisüsteem: Windows 10 Pro Videokaardi mälu: DynamicProtsessori mudel ja number: Intel Core i7-6600U 2.60-3.40GHzOperatiivmälu tüüp: DDR4Videokaart: Intel HD Graphics 520Optiline seade: NoKaal: 1.43 kgToote seisukord: RenewMudel: HP EliteBook Folio 1040 G3Protsessori tuumad: 2-core, 4-threadsSüsteemne kiirus: 4 GT/sVahemälu: 4 MBMaksimaalne operatiivmälu maht: 16 GBHDD kiirus: SSDVideokaart tüüp: IntegratedIntegreeritud vörgukaart: YesVörguühenduse kiirus: 10/100/1000 Mbit/sUSB 3.1 Gen 1 liideste arv: 2Liidese tüüp: HDMI, Audio out/Mic, USB Type-CArvuti suurus (P*L*K): 23.5*33.7*1.6Ekraani suurus: 14"Ekraani tüüp: Anti-glareMaksimaalne eraldusvõime: 1920*1080WiFi (traadita internet): 802.11 a/b/g/n/ac3G/4G tugi: NoBluetooth: YesKlaviatuuri keel: QWERTY ENGKlaviatuuri valgustus: YesSisseehitatud veebikaamera: YesSisseehitatud mikrofon: YesSisseehitatud kaardilugeja: NoAku garantii: 6 monthPakendi suurus (P*L*K): 39*44*10

The coated connection for 12mm (AD) Hard Tubes from EK Water Blocks, is a compression fitting made of brass. It is in the colour black and comes from the Classic series, which convinces by a simple design. In this fitting, the union nut serves as a compression ring that presses the sealing ring onto the hard tube. Thus it offers a higher safety and sealing than e.g. the fittings of the EK-HD series. Technical Data: Material: Coated Brass Colour: Black Supported Tube: 12 mm OD Thread: G1/4", 4,5 mm Male Thread Length Outer Diameter (Fitting): 19 mm Installed Height: 12 mm Compatible Solid Tubing: Acrylic, PETG, Copper, Brass, Stainless Steel

Koolance QD3 Quick Disconnect Straight Female to G1/4 Inch – Silver Koolance QD3 Series: High-Quality Quick Disconnects for Maximum Flexibility in Water Cooling Koolance is renowned among experts for outstanding quality and premium design. The manufacturer offers a wide range of water cooling components – from cooling blocks and radiators to pumps, high-quality fittings, and tubing.A standout feature is the QD3 series of quick disconnects, providing maximum flexibility and convenience when connecting and disconnecting the cooling loop. With just one motion – by simply pressing down a metal ring – the connection is released without draining the entire system. This makes them ideal for frequently swapped components or the easy transport of external radiators. Why Choose Koolance Quick Disconnects? Tool-free quick connection and disconnection Minimal leakage thanks to No-Spill technology (max. 0.2 ml fluid loss) Perfect for modular water cooling – ideal for enthusiasts and overclockers Premium materials – black-coated brass for durability The Koolance QD3 series consists of male and female connectors that securely lock together. This model is the black, straight female version with a G1/4-inch outer thread, compatible with most water cooling systems. Maximum compatibility – easy handling – professional quality. Perfect for anyone looking to keep their water cooling setup flexible

The Alphacool ES G1/4 barbed fitting for 12.7/7.6mm is part of Alphacool’s professional ES series and sets new standards in design, functionality, and reliability for water cooling systems in servers, workstations, and industrial applications. With its precisely machined barbed fitting and solid brass construction, this connector ensures a secure and leak-proof connection for 12.7/7.6mm tubing. The internal diameter is optimized for minimal flow resistance, supporting effective coolant circulation even in complex system configurations. Hose barb fittings offer a compact and straightforward alternative to compression fittings, highlighting more of the tubing and saving space — especially useful in tight installations or specialized setups. Despite their minimal form factor, they provide secure hose grip and high flow capacity. ES Series – developed for professionals Each component in Alphacool’s ES line is engineered for professional-grade reliability and performance. Whether in a high-performance workstation or industrial cooling setup, these fittings deliver consistent performance and robust build quality. Technical dataType:fitting for low flow ratesDimensions:31,30 mm x 17,50 mmNominal diameter:10,20 mmConnection type:barbed fitting for tubeMaterial:brass (CuZn39Pb3)Seal material:EPDM Shore A 70Working pressure:2barBurst pressure:8barWorking temperature (in degrees Celcius):-20 ~ +100Recommended liquids:water, deionized water, glycol water, propanediol water etc.Thread type:G1/4” 6 mm outer threadThreaded fastening:Open-end wrench width across flats 13 mmWeight:12gColor:brass, raw

The Alphacool ES G1/4 90° rotatable Fitting with Barbed Fitting for TPV Tubes 12.7/7.6mm is part of Alphacool’s professional ES series and sets new standards in design, functionality, and reliability for water cooling systems in servers, workstations, and industrial applications. With its precisely machined barbed fitting and solid brass construction, this connector ensures a secure and leak-proof connection for 12.7/7.6mm tubing. The internal diameter is optimized for minimal flow resistance, supporting effective coolant circulation even in complex system configurations. Hose barb fittings offer a compact and straightforward alternative to compression fittings, highlighting more of the tubing and saving space — especially useful in tight installations or specialized setups. Despite their minimal form factor, they provide secure hose grip and high flow capacity. Thanks to the 90° rotatable design, tubing can be routed with exceptional flexibility. The fitting simplifies clean loop layout, reduces mechanical stress on the tubing, and enables space-saving installations — ideal for compact cases or densely packed rack systems. ES Series – developed for professionals Each component in Alphacool’s ES line is engineered for professional-grade reliability and performance. Whether in a high-performance workstation or industrial cooling setup, these fittings deliver consistent performance and robust build quality. Technical data Type: 90° rotatable fitting for low flow rates Dimensions: 26.35 mm x 29.15 mm x 15.80 mm Nominal diameter: 10.20 mm Connection type: barbed fitting for tube Material: Brass (CuZn39Pb3) Seal material: EPDM Shore A 70 Clamping spring material: stainless steel (X10CrNi18-8) Working pressure: 2bar Burst pressure: 8bar Working temperature: -20℃ ~ +100℃ Recommended liquids: water, deionized water, glycol water, propanediol water etc. Thread type: G1/4” 6 mm outer thread Threaded fastening: Open-end wrench width across flats 16 mm Weight: 23g Color: brass, raw

The Alphacool ES G1/4 barbed fitting (short) for 12.7/7.6mm is part of Alphacool’s professional ES series and sets new standards in design, functionality, and reliability for water cooling systems in servers, workstations, and industrial applications. With its precisely machined barbed fitting and solid brass construction, this connector ensures a secure and leak-proof connection for 12.7/7.6mm tubing. The internal diameter is optimized for minimal flow resistance, supporting effective coolant circulation even in complex system configurations. Hose barb fittings offer a compact and straightforward alternative to compression fittings, highlighting more of the tubing and saving space — especially useful in tight installations or specialized setups. Despite their minimal form factor, they provide secure hose grip and high flow capacity. ES Series – developed for professionals Each component in Alphacool’s ES line is engineered for professional-grade reliability and performance. Whether in a high-performance workstation or industrial cooling setup, these fittings deliver consistent performance and robust build quality. Technical dataType:fitting for low flow ratesDimensions:23,00 mm x 15,91 mmNominal diameter:10,20 mmConnection type:barbed fitting for tubeMaterial:brass (CuZn39Pb3)Seal material:EPDM Shore A 70Working pressure:2barBurst pressure:8barWorking temperature (in degrees Celcius):-20 ~ +100Recommended liquids:water, deionized water, glycol water, propanediol water etc.Thread type:G1/4” 6 mm outer threadThreaded fastening:Open-end wrench width across flats 13 mmWeight:12gColor:brass, raw

The Alphacool ES 2xMCX manifold is a compact, robust solution for integrating MCX components into a cooling loop with 12.7/7.6 mm tubing. Designed for professional use in industrial, server, and workstation environments, this manifold combines maximum reliability with a space-saving form factor.Manufactured entirely from solid brass, the manifold offers high resistance to pressure and corrosion, ensuring long-term durability even in 24/7 operations. The natural brass finish emphasizes its technical and industrial character.The integrated barbed fittings are designed for 12.7 mm outer diameter and 7.6 mm inner diameter tubing. They offer a secure grip without the need for additional compression fittings, streamlining installation in confined environments.Equipped with inlet and outlet, the manifold enables the direct integration of MCX components into the cooling loop. This is particularly useful for temperature monitoring or flow control in critical systems.Whether used in a data center, industrial cooling unit, or high-performance computing system, the Alphacool ES 2xMCX manifold delivers uncompromising reliability and functionality — precisely what professionals need. Technical dataType:Distributor with tube connection for low flow ratesDimensions:60,50 mm x 19,70 mmNominal diameter:10,20 mmConnection type:barbed fitting for tube (2x 12.7/7.6mm & 2x MCX)Material:brass (CuZn39Pb3)Working pressure:2barBurst pressure:8barWorking temperature:-20℃ ~ +100℃Recommended liquids:water, deionized water, glycol water, propanediol water etc.Weight:15gColor:brass, raw

Koolance QD3 quick release straight female to 13/10mm - silver Koolance is renowned among enthusiasts for its outstanding quality and excellent design. Koolance offers a wide range of water cooling components—from heatsinks, radiators, and pumps to high-quality fittings and hoses. A particular highlight is the QD series of quick release connectors, providing maximum flexibility and convenience when connecting or disconnecting the cooling loop. With a single action—simply pressing down the metal ring—the connection is released without needing to drain the entire system. This makes them ideal for frequently changing components or for easily transporting external radiators. Why choose Koolance quick release fasteners? Quick disconnection and connection without tools Minimal leakage due to no-spill technology (max. 0.2 ml liquid leakage) Perfect for modular water cooling—ideal for enthusiasts and overclockers High-quality materials—black lacquered brass for durability The Koolance QD3 series consists of a male and female connector that securely attach to each other. This model is the silver straight female version with a 13/10mm hose connection , suitable for most water cooling systems with a 13/10mm hose. The hose is fastened and secured using a compression fitting on this Koolance QD3 quick connector. Maximum compatibility—easy handling—professional quality. Perfect for anyone wanting to keep their water cooling system flexible! All Koolance fittings are available online at Aquatuning!

The ULTITUBE D5 PRO LEAKSHIELD from Aquacomputer, comes as a combination, consisting of expansion tank and leakshield. The borosilicate glass expansion tank, with a diameter of 65mm, has a very high hardness and scratch resistance, as well as very low thermal expansion and excellent chemical and thermal resistance. The base and the lid of the reservoir are made of acetal. In addition, a filter element is integrated in the base, which is easy to clean under running water, for example. The filter also reduces air bubbles. The ULTITUBE is rounded off with an impressive RGBpx-compatible LED ring, with 13 addressable LEDs. This can be easily connected to the D5 NEXT pump. With the LEAKSHIELD, the user almost no longer needs to worry about the tightness of his water cooling. Thanks to its negative pressure, the LEAKSHIELD actively protects against leaks. This means that no more coolant leaks out of the system. Of course, it does not protect against major damage, such as torn tubes. The air that enters is then pumped out of the system by the integrated vacuum pump. Even before the water cooling system is put into operation for the first time, the LEAKSHIELD checks the system for leaks by creating a vacuum. The system is then checked for pressure changes. It can also simplify filling by drawing the coolant directly from the bottle through a suction line. Technical Data Coolant capacity: approx. 230 ml Connection threads: G1/4" D5 NEXT Supply voltage: 5V, 12V D5 NEXT Maximum power consumption: 65 W (including fan and RGBpx output) D5 NEXT Maximum fan output power: 25 watts D5 NEXT Maximum pump head: 3.7 m / 370 mbar LEAKSHIELD Generated negative pressure: max. -450 mbar LEAKSHIELD Supply voltage: 5 V DC via USB LEAKSHIELD Current consumption: max. 500 mA Dimensions incl. D5 NEXT pump and LEAKSHIELD: approx. 72 x 77 x 227 mm (All dimensions without mounting material) The number 100/150/200 in the Ultitube series product name refers to the length of the glass tube in millimeters. Scope of delivery: One reservoir with integrated pump RGBpx compatible LED ring RGBpx cable, length 50 cm Rubber fixation ring with stainless steel insert Two internal USB cables, length approx. 100 cm Mounting material System requirements Windows 8.1 or newer Internal USB 2.0 port

The expansion tanks of the ULTITUBE series are equipped with a tube made of borosilicate glass, which, in contrast to the Plexiglas often used for tube expansion tanks, has a very high hardness and scratch resistance, a very low thermal expansion and excellent chemical and thermal resistance. The glass tube has an outer diameter of 65 mm and a wall thickness of 5 mm. Both ends of the glass tube are firmly connected with metal rings made of black anodized aluminum, which do not come into contact with the cooling medium. The base and lid of the ULTITUBE series are made of resistant acetal and screwed to the glass tube. A large opening is available for filling the expansion tank after unscrewing the lid. A filter element made of a fine stainless steel wire mesh is integrated in the bottom of the container and, in addition to functioning as a particle filter, also separates air bubbles. The filter element is integrated in a molded rubber part and can, for example, be rinsed out under running water. The seal in the upper area of ​​the glass tube is also designed as a molded rubber part for easy assembly and is therefore securely positioned when the lid is screwed on. An Aqua Computer D5 PWM pump is mounted directly on the bottom of the expansion tank. The performance of the pump can be set using a PWM signal, and a speedometer signal is also available to monitor the pump function.The pump's electronically commutated ball motor runs extremely quietly and has a long service life. When developing the expansion tank, care was also taken to ensure optimum flow behavior, the result being extremely quiet and smooth operation of the pump. Fastening material for mounting on a side / rear wall or a standing mounting are included in the scope of delivery. Four soft rubber decouplers are included for decoupling. Technical specifications: Filling volume: approx. 350 ml Connection thread: G1 / 4 Operating voltage: 8 - 24 V DC Power consumption: 23 W (at 12 V) Pressure at 12 V: 3.7 m water column Power supply via 4-pin Molex drive connector, PWM and tacho signal separately on 4-pin fan connector Dimensions including pump: approx. 72 x 72 x 250 mm Scope of delivery: An expansion tank with an integrated pump Fastening material Please note: The expansion tank is supplied without connections, please order suitable connections separately

Magnetisches Haltesystem für die aquabox professional 5 1/4", bestehend aus einem Edelstahl-Haltebügel sowie drei starken Magneten zum Einpressen in die Rückseite der aquabox professional. Der Edelstahl-Haltebügel wird in einem freien Laufwerksschacht des PC-Gehäuses montiert und erlaubt anschließend die werkzeuglose Montage einer aquabox profesional. Für eine einfache Montage wird die aquabox professional beim Einschieben in den Laufwerksschacht präzise geführt, die montierten Magnete sowie zwei Positionsstifte halten sie schließlich in Position. Zum Befüllen kann die aquabox professional einfach nach vorne herausgezogen werden, um die Befüllöffnungen an der Oberseite der aquabox professional zu erreichen, lästiges Lösen von Befestigungsschrauben ist nicht nötig. Lieferumfang:Haltebügel aus Edelstahldrei Magnete Hinweis: Die Lieferung erfolgt ohne aquabox professional!Dieses Produkt wurde für Sie getestet:Xpert-OC-Team

You have the Alphacool Eisfach in the DC-LT or DDC version and would like to switch to the D5 version? With this modification kit, no problem. Knowing Alphacool, any kind of modifying, expanding and upgrading is no problem, as always. Just remove the back of the Eisfach and attach the new D5 back. And just like that, you have a system with the power of the D5 pump. On the back: On the right side of the back are two display spaces for 5mm LEDs, behind the window panel. This lets you create a unique look and illumination. On the left side there are two openings for filling or draining fluid. The final two 1/4” threads are meant for the inlet and outlet. Behind the inlet, a Bubble Down unit has been installed to prevent turbulence which could let air into the water circulation. Scope of Delivery: 1x Alphacool Eisfach - Single Laing D5 - backside modification kit

As an accessory to the Phobya Banalcer reservoirs, Phobya now offers the "bodies" (Plexi tubes) separately. The possibility of individual purchase of the tubes has multiple advantages: If your tube is worn, scratched or damages, it is no longer necessary to replace the whole reservoir. Should the reservoir have become too small e.g. for an upgraded system, it is now possible to replace the tube by a bigger one or to connect a second one with a tube connector piece (Item No. 46142). Technical specifications: Material: Acrylic Length: 100mm (identical with Phobya Balancer 150 tube) Outer diameter: 50mm Note: O-rings not included!

The design has proven itself for a long time: The frosted transparent material is perfect for clear tube reservoirs and keeps the focus on the important parts. But his hard plastic used to be rather sensitive if treated incorrectly. This is now over! The new material mix is now even more sturdy and handles shearing forces much better, allowing hassle-free mounting. Technical specifications:Material: Hard plasticColour: Frosted transparentInner diameter: 50mmScrew hole size: M4 Extent of delivery:2x Alphacool Cape Coolplex Plexiglas mount, 1 piece 50mm Please note: For mounting additional screws are required. We recommend ordering Item No. 46023.

The best Alphacool reservoir mounts of all times! Many reservoir mounts were designed for the original tube reservoirs from the beginning of the PC water cooling sector. During the last years though, the reservoirs became larger, sized for more capacity and metal was integrated for the end caps. This resulted in heavier reservoirs, making the construction of more sturdy mounts imperative. With this universal mounting system every tube reservoir with an outer diameter of 50 or 60mm can be mounted safely and securely! The design is based on hose clamps, which are able to safely seal in pressures of multiple bar with their closed-loop clamping design. Of course a possibility for LED installation was also implemented. Two slightly pre-drilled holes in the back can be drilled as needed, and nothing stands in the way of spectacular lighting for your reservoir. Technical specifications: Material: Plastic Color: Black Inner diameter: 50mm Mounting hole diameter: M4 LED holes (not opened): per mount 2x 5mm Extent of delivery: 1 pair Alphacool AGB Universal mount Clip-On 60mm – black 2 pcs Note: For mounting additional screws are needed. We recommend ordering Item No. 46023 with the mounting clips.

What is it? The Alphacool Cape Corp Coolplex HF Metal is the first reservoir from Alphacool which has a base and top made completely out of brass and also has the Lighttower water effect. Highlights: Base and top made of brass Lighttower water effect Three sizes and two colours Many connection options With the Alphacool Cape Corp Coolplex HF Metal, you get a reservoir in elegant brass. The base and top are both made of solid nickel-plated brass, creating a uniquely elegant look in your computer. The Cape Corp Coolplex HF Metal doesn’t get its good looks from various gimmicks, but rather from its simplicity and the materials used. And yet, the Cape Corp Coolplex HF Metal still features an optical highlight that has become virtually essential to the Alphacool Series. The Lighttower water effect is included here too. The streams of water coming sideways out of the riser pipe hit the transparent Plexiglas of the reservoir, creating a unique fountain effect that changes at every flow rate. If you’d rather not use the water effect, you can simply fill the reservoir past the riser pipe. The base has two options for connecting both the inlet and outlet – on the side of the base or directly underneath it. This gives you different options for setting up your system the way you want it. You can also pass the water into the reservoir through its top, though this setup does have some disadvantages. This setup means going without the Lighttower water effect, and of course that air will enter the cooling loop when it is switched off. The included clip-on brackets make installation a cinch. The brackets are simply screwed in at the desired place with an M4 screw. If your case doesn’t have holes in the right places, you can simply drill those in. The reservoir just needs to be clipped on. When the Cape Corp Coolplex HF Metal is at the desired height, the clips can be fastened to hold the reservoir in place. It doesn’t get any easier than that. The Alphacool Cape Corp Coolplex HF Metal is available in Chrome and Deep Black versions. Alphacool also carries three different sizes. From the extremely compact Metal 10 to the medium Metal 15 up to the expansive Metal 25, you choose the right version to fit your unique system. Technical Details Dimensions: 49 x 49 x 117mm Material: brass, acryl glass Threads: 5x GI/4" Mounting: 2x universal mountClip-On Color: chrome Capacity: 80ml Scope of Delivery 1x Alphacool Cape Corp Coolplex HF metall 10 - chrome Brackets 2x Sealing plugs 3x Mounting material Manual Datasheet Download 3D-file (.stp)

With this mounting bracket, you can install all Alphacool “Eisbecher” reservoirs on all standard radiators with 120 and 140mm fans. This ensures you have the most options possible for installation. Assembly is simple. Remove the existing bracket from the “Eisbecher” and replace it with the new one. Each bracket is held up by two small screws. The inner oblong holes are for mounting on units with 120mm fans, the outer ones for 140mm fans. With this mounting kit, an “Eisbecher” reservoir can easily be mounted in most cases, while saving space. For example, you could mount a radiator on the front with fans blowing inward, then mount the “Eisbecher” on the back without disrupting the airflow. Of course, you’re free to come up with other mounting possibilities as well. Technical Details: Installation option on 120 and 140 mm fan sites Material: stainless steel, galvanized Colour: Black Scope of Delivery: Alphacool 120/140mm mounting bracket for Alphacool Eisbecher - 2 pcs

The HEATKILLER® Tube Series is a modular series of high end reservoirs with a glass tube made from borosilicate glass. It has some outstanding features which are listed here. Large filling mouthThanks to a large filling mouth and a bayonet catch lid the HEATKILLER® Tube Series reservoirs can be opened without any tools and is easy to fill. It has never been easier to re-fill a cooling medium. Borosilicate glass tubeBorosilicate is a glass with very high chemical and thermic resistance. It is scratch-resistant and has very low heat expansion. These outstanding features make borosilicate an ideal material for reservoirs. Three sizesTo account for different space availability in current cases, the HEATKILLER® Tube Series reservoir glass tubes are available in sizes 100mm, 150mm and 200mm. Three versionsBesides a standalone version, there are versions with direct connections for pumps. They support D5 and DDC pumps by Lowara (formerly known as Laing) and their derivatives. Large volumeIn designing the HEATKILLER® Tube Series, we took great care not to waste any of the available volume. That makes the HEATKILLER® Tube Series reservoirs very low maintenance, because they need fewer re-fills. Anti- Cyclone-effectThe exclusively developed anti-cyclone-inlay which is located at the bottom of the reservoir prevents vortices that easily form in reservoirs. This reduces noise levels and makes air bleeding easier. Streaming-optimized pump chambersThe pump adapter for D5 and DDC pumps comes with a streaming optimized pump chamber. This causes fewer vortices during use, which has a positive effect on both flow rate and air bleeding. Made in GermanyThe HEATKILLER@ Tube Series reservoirs are completely produced in Germany. Extensive optional accessoriesThe HEATKILLER@ Tube Series reservoirs have various optional features, for example: Variable Mounting systemsFor optimal integration into a water cooled system we offer different mounting systems to fit your build. …horizontal mount (pedestal)Two different height pedestals are available for mounting the HEATKILLER@ Tube Series reservoir to the case floor or free-standing. … vertical mountA multifunctional bracket mount offers options for vertical montage. Several adapters are available. Some can be used to attach the reservoir to 120x120mm or 140x140mm cooler slots. Others allow for a montage of the reservoir on a radiator from the MO-RA3 series. IlluminationHEATKILLER@ Tube Series reservoirs can be set in scene with LED illumination. We offer splash-safe LED strips in various colors. The strips are hidden in the struts of the reservoir cage. Colored strutsTo customize your HEATKILLER@ Tube Series you can exchange the default struts. We offer aluminum struts in natural color or with a choice of anodized colors. Technical data: Material cover: POM Material struts: black anodized aluminium Tube: borosilicate glass Material bottom: POM Material Inlay: stainless steel Measurements (LxWxH): 70 x 70 x 253,4 mm Tube length: 150mm Tube diameter: 65mm Capacity: aprox. 375ml Weight: aprox. 790g Seal: NBR, VMQ Connection thread: 2x G ¼ inch (DIN ISO 228-1) Scope of delivery: 1x HEATKILLER® Tube 150 D5 1x manual

Alphacool Eisbecher replacement plexi tube 60x105mm. You have a 150mm Eisbecher, but during installation or over time you notice that the plexi tube no longer looks as good, or it has scratches. Or maybe you have the 250mm version and would like to fit another radiator into the case but you notice the reservoir is too big, or you simply want to switch to the 150mm version. No problem! Simply remove the scratched or too-big plexi tube and screw in the new one. Done! You can simply continue using the pump socket and cap. Technical Specifications Dimensions (LxW): 105 x 60mm Colour: transparent Material: plexiglass Scope of Delivery 1x Alphacool Eisbecher Plexi Tube 60 x 105mm

Our colored interchangeable struts are a easy way to customize your HEATKILLER® Tube Series reservoir. The struts are made from solid aluminum. The colored versions have a high end anodically oxidized finish. Delivery includes four struts. One of them is designed to hold a LED strip. Corresponding LED strips are available separately. Please be careful to choose the correct strut length for your tube. The name of your HEATKILLER® Tube Series tells you its length, for example a HEATKILLER® Tube 100 requires 100mm long struts. Technical data: Length: 100mm Material: Aluminum Color: natural Scope of delivery: 1x strut designed for HEATKILLER® Tube 100 LED illumination module 3x strut for HEATKILLER® Tube 100

Our colored interchangeable struts are a easy way to customize your HEATKILLER® Tube Series reservoir. The struts are made from solid aluminum. The colored versions have a high end anodically oxidized finish. Delivery includes four struts. One of them is designed to hold a LED strip. Corresponding LED strips are available separately. Please be careful to choose the correct strut length for your tube. The name of your HEATKILLER® Tube Series tells you its length, for example a HEATKILLER® Tube 100 requires 100mm long struts. Technical data: Length: 150mm Material: Aluminum Color: natural Scope of delivery: 1x strut designed for HEATKILLER® Tube 150 LED illumination module 3x strut for HEATKILLER® Tube 150

Our colored interchangeable struts are a easy way to customize your HEATKILLER® Tube Series reservoir. The struts are made from solid aluminum. The colored versions have a high end anodically oxidized finish. Delivery includes four struts. One of them is designed to hold a LED strip. Corresponding LED strips are available separately. Please be careful to choose the correct strut length for your tube. The name of your HEATKILLER® Tube Series tells you its length, for example a HEATKILLER® Tube 100 requires 100mm long struts. Technical data: Length: 200mm Material: Aluminum Color: blue Scope of delivery: 1x strut designed for HEATKILLER® Tube 200 LED illumination module 3x strut for HEATKILLER® Tube 200

The expansion tanks in the ULTITUBE series are equipped with a tube made of borosilicate glass, which, in contrast to the Plexiglas often used for tube expansion tanks, has a very high level of hardness and scratch resistance, very low thermal expansion and excellent chemical and thermal resistance. The glass tube has an outer diameter of 65 mm and a wall thickness of 5 mm. Both ends of the glass tube are firmly connected to metal rings made of black anodized aluminum, which do not come into contact with the cooling medium. The base and lid of the ULTITUBE series are made of durable acetal and are screwed to the glass tube. This means that a large opening is available for filling the expansion tank after unscrewing the lid. A filter element made of a fine stainless steel wire mesh is integrated into the bottom of the container, which not only functions as a particle filter but also separates air bubbles. The filter element is integrated into a rubber molded part and can be rinsed out under running water, for example. The seal in the upper area of the glass tube is also designed as a rubber molded part for easy assembly and is therefore securely positioned when the lid is screwed on. Mounting materials for mounting on a side/rear wall or for standing mounting are included in delivery. Technical data: Filling volume: approx. 110 ml Connection thread: G1/4 Dimensions: approx. 72 x 72 x 100 mm (All dimensions without fastening material) In the Ultitube series, the number 50/100/150/200 in the product name refers to the length of the glass tube in millimeters. Scope of delivery: An expansion tank Fastening material Please note: The expansion tank is delivered without connections, please order suitable connections separately.

The expansion tanks of the ULTITUBE series are equipped with a tube made of borosilicate glass, which, in contrast to the Plexiglas often used for tube expansion tanks, has a very high hardness and scratch resistance, a very low thermal expansion and excellent chemical and thermal resistance. The glass tube has an outer diameter of 65 mm and a wall thickness of 5 mm. Both ends of the glass tube are firmly connected with metal rings made of black anodized aluminum, which do not come into contact with the cooling medium. The base and lid of the ULTITUBE series are made of resistant acetal and screwed to the glass tube. A large opening is available for filling the expansion tank after unscrewing the lid. A filter element made of a fine stainless steel wire mesh is integrated in the bottom of the container and, in addition to functioning as a particle filter, also separates air bubbles. The filter element is integrated in a molded rubber part and can, for example, be rinsed out under running water. The seal in the upper area of ​​the glass tube is also designed as a molded rubber part for easy assembly and is therefore securely positioned when the lid is screwed on. The PRO version of the ULTITUBE D5 has a gas exchange membrane integrated directly into the cover of the expansion tank. Pressure fluctuations caused by temperature changes are continuously compensated via the membrane without coolant being able to escape.An RGBpx-compatible LED ring with 13 individually addressable LEDs is included in the scope of delivery and can be used to effectively illuminate the expansion tank. An Aqua Computer control unit with RGBpx output is required to operate the LED ring (e.g. D5 NEXT, not included in the scope of delivery). At the end of the strip there is a connector for connecting another RGBpx component.A rubber fastening ring with a stainless steel insert is included in the scope of delivery for an additional, vibration-damped fastening of the expansion tank in the upper area of ​​the glass tube. All D5 pumps offered by Aqua Computer can be mounted on the bottom of the expansion tank, as well as pumps of the same design from other manufacturers. When developing the expansion tank, attention was paid to optimal flow behavior, the result is extremely quiet and quiet operation of the pump. The pump is attached using a slim, black anodized aluminum ring. It is not possible to use the expansion tank without a pump. Fastening material for mounting on a side / rear wall or a standing mounting are included in the scope of delivery. Four soft rubber decouplers are included for decoupling. Technical specifications: Filling volume: approx. 230 ml Connection thread: G1 / 4 Dimensions without pump: approx. 72 x 72 x 160 mm Dimensions with D5 pump (not included): approx. 72 x 72 x 200 mm Dimensions with D5 NEXT pump (not included): approx. 72 x 72 x 215 mm Scope of delivery: An expansion tank RGBpx compatible LED ring RGBpx connection cable, length 50 cm Rubber mounting ring with stainless steel insert Fastening ring and seal for fastening the pump Fastening material Please note:The expansion tank is supplied without connections, please order suitable connections separately. A D5 pump is also required and is not included in the scope of delivery! When used with a D5 NEXT, the bracket included in the scope of delivery cannot be used; instead, it can be installed directly on the D5 NEXT. Alternatively, a suitable bracket is available as an optional accessory under item number 34111 (not included in the scope of delivery).

Perfect replacement or practical extension. Does your Alphacool Core 100 or Core 200 need a visual upgrade or a functional adjustment? The replacement acrylic tube with external thread is the ideal solution to give your Core 100 / 200 a new shine or to customize the size.With the Alphacool acrylic tube external thread 60x84mm you can easily give your water cooling system a new look or expand its functionality. Does your Core 100 no longer look so good because the acrylic tube has become scratched? Or do you have the Core 200 version and want to have the smaller Core 100 version? No problem! This high-quality spare part offers you exactly these options.Simply unscrew the scratched or too small acrylic tube and fit the new one. You can continue to use the pump base and cover without any problems. This saves you time and effort - with an impressive result! Whether as a spare part or an extension: With the Alphacool acrylic tube external thread 60x84mm you get the best out of your water cooling system. Technical DataDimensions (DxH)60x84mmColorTransparentMaterialAcrylicCompatibilityAlphacool Core 100, Alphacool Core 200

The Alphacool ES Pressure Valve is designed to manage pressure fluctuations in closed-loop water cooling systems. Developed for use in servers, workstations, and industrial environments, it safeguards individual components from excessive pressure build-up. Thanks to its compact dimensions—just 20.0 mm in height and 16.0 mm in diameter—the valve is well-suited for installations where space is limited. The G1/4" thread ensures straightforward integration into existing cooling circuits. Installation is versatile, allowing the valve to be positioned where it most effectively contributes to system reliability. Engineered for continuous use under demanding conditions, the valve features a durable housing that resists both thermal and mechanical stress. Its precision valve mechanism guarantees reliable performance throughout its entire operational lifespan. Technical specifications Type: Pressure equalizing valve to limit the pressure increase in the closed system Dimensions: 20.0 mm x 16.0 mm Material Valve body: brass (CuZn39Pb3) Compression spring material: stainless steel (X10CrNi18-8) Material O-ring: NBR Shore 70 Working pressure: 2bar Burst pressure: 4bar Working temperature (in degrees Celsius): -20 ~ +100 Recommended liquids: water, deionized water, glycol water, propanediol water etc. Thread type: G1/4’, external thread 5mm Weight: 18g Color: silver/black

The ultimate centerpiece for your custom liquid loop—now with an integrated D5 Vario pump! The XSPC D5 Photon 170 ARGB Reservoir / Pump Combo V4 is the consistent evolution of the popular Photon design, delivering everything you need for a reliable and visually stunning water cooling system in one compact package. Peak Performance Meets Brilliant Design: Integrated D5 Vario Pump: This combo comes directly equipped with the powerful and proven Xylem/Laing D5 Vario pump. Use the speed dial to adjust the pump's output to perfectly match your system, while the tacho output allows for precise monitoring. Ultra-Clear Acrylic Tube: The tube is made from high-quality, ultra-clear acrylic, offering excellent transparency and high resistance to staining and discoloration. Elegant aRGB Lighting (V4 Upgrade): The aRGB lighting is discretely positioned at the back of the reservoir and utilizes a diffuser strip. This ensures professional, uniform illumination that seamlessly integrates into your motherboard's ecosystem via 3-Pin/5V headers (Asus AURA, MSI Mystic, Gigabyte RGB Fusion). Robust CNC-Milled Aluminum Bracket: Say goodbye to flimsy plastic mounts! The XSPC Photon V4 features a high-quality aluminum bracket secured to both ends of the reservoir. It provides a rock-solid hold while remaining minimalist, ensuring an unobstructed view of the reservoir. Improved Mounting and Filling: The V4 version includes a new bracket that allows direct attachment to both 120mm and 140mm radiators. The enhanced fill port features lower restriction, making the reservoir easier to fill. Technical Details: Tube Material: High-Quality Acrylic Cap/Top Material: Acetal Bracket Material: CNC-Milled Aluminum (Matte Black) Dimensions: 241.5 x 85 x 89mm (Including pump and bracket) Capacity: Approx. 425 ml Ports: 3x G1/4" Threads (2x Inlet, 1x Outlet) Lighting: 10x Individual aRGB LEDs (3-Pin/5V) Pump Type: Original Xylem/Laing D5 Vario Pump (Included) Flow/Head: Max. 1200 lph / 3.7 m (at 12V) Included in the Box: XSPC D5 Photon 170 aRGB Reservoir / Pump Combo V4 - Black Integrated D5 Vario Pump Integrated aRGB Diffused Lighting Mounting Bracket (Matte Black) G1/4" Blank Plug (Matte Black) M20 Fill Cap (Matte Black) Custom D5 Lock Ring

Adapter Europe to US or CanadaIf you are an avid tourist or just travelling for business, this country adapter is the answer to charging needs for European travellers in the US or CanadaSuitable even for powerful devices such as laptops and travel hairdryersApplicable in many countries: USA, Canada, Bahamas, Colombia, Costa Rica, Cuba, MexicoThis adapter is suitable for all devices with the following plug types:,This adapter is compatible with the following socket types:Technical SpecificationsDesigned in SwitzerlandSuitable for equipment with earthed & unearthed plugs (2- & 3-pole)Receptacles for: 3-pole Europe (Schuko) & 2-pole EuroOutput plug: USInput voltage: 100 V – 250 VMax. load: 15 APower rating: e.g. 100 V – 1500 W / 250 V – 3750 WDoes not convert voltage

G-Nexus P24 90 Degree 12VHPWR 12+4-Pin to three 8-Pin Adapter Innovative 12VHPWR connector that allows you to easily improve the aesthetic and cable management with a 90-degree 12+4-pin to three 8-pin adapter. Supporting up to 600W of power.G-Nexus P24 90 Degree 12VHPWR 12+4-Pin to three 8-Pin Adapter • 12+4-pin to three 8-pin • 90 degree connection • Supports up to 600W • Compact and aesthetic design • Better case spacing90 Degree Connection An angled connection eliminates the necessity for wire bending, preventing additional stress on both the cable and the graphics card connector. Our 12VHPWR connector follows the TYPE 1 configuration with the 4-pin on the backplate side, located above the 12-pins.Up to 600W Output Perfect for latest NVIDIA RTX 40 Series GPUs with legacy PSU’s. Compact and Aesthetic Design The compact design not only saves space for easier cable management but also retains its elegant appearance with a stylish pattern.Recommended Guide: - Refrain from utilising cables that are not standard configuration - Ensure adapters and cables are kept away from heat sources - Avoid daisy chaining or using additional adapter cables To prevent incorrect operation and the risk of the connector overheating and melting, it's essential to ensure a complete and secure connection between connectors.We highly recommend the use of 3 separate PCIe cables to connect with Power Supply Unit (PSU) for the best performance and safety. Application 12+4-Pin (male) konnektori parempoolne adapter kolmele 8-Pin (female) konnektorile Dimensions 26.5 x 67 x 31mm Connector 12+4-Pin (male) x18-Pin (female) x3 Max. Wattage Support 600W Product Code AK-CBPW30-BK

A water cooling system consists of many different elements. Pumps, radiators, cooling blocks, reservoirs and often other com-ponents. In order to build up a functional water cooling system, these components must of course be connected to each other. The easiest way to do this is use tubung. Here the Alphacool AlphaTube HF tubing is the best choice.OpticsIn different vivid colors, clear and also UV-active. The AlphaTube HF tube offers a large selection of different colours and styles making it easy to find the hose that best suits your taste.ApplicationThe AlphaTube HF tubing has the perfect flexibility to be easily installed. It is flexible enough to be laid without effort, butat the same time rigid enough that it will not kink easily, even with tighter bending radii.Available in different sizes.We offer the AlphaTube HF hose in all common sizes.Technical data:Length: 3 mTube size: OD 13 mm / ID 10 mmMaterial: PVCHardness grade: 65-70 A-ShoreWorking temperature: -10 - 80°CBurst pressure: 8 barWorking pressure: 2 bar Download data sheet PDF:

A water cooling system consists of many different elements. Pumps, radiators, cooling blocks, reservoirs and often other com-ponents. In order to build up a functional water cooling system, these components must of course be connected to each other. The easiest way to do this is use tubung. Here the Alphacool AlphaTube HF tubing is the best choice.OpticsIn different vivid colors, clear and also UV-active. The AlphaTube HF tube offers a large selection of different colours and styles making it easy to find the hose that best suits your taste.ApplicationThe AlphaTube HF tubing has the perfect flexibility to be easily installed. It is flexible enough to be laid without effort, butat the same time rigid enough that it will not kink easily, even with tighter bending radii.Available in different sizes.We offer the AlphaTube HF hose in all common sizes.Technical data:Length: 1 mTube size: OD 13 mm / ID 10 mmMaterial: PVCHardness grade: 65-70 A-ShoreWorking temperature: -10 - 80°CBurst pressure: 8 barWorking pressure: 2 bar Download data sheet PDF:

The Alphacool pit saw for acryl/PETG tubes is no ordinary saw from the hardware store. Its special saw blade with fine teeth makes it perfectly suited for cutting acryl/PETG tubes. This saw blade eliminates the usual problems. Even when first placed against the tube, the teeth cut through the acryl so smoothly that there is no slipping around. Any breaking or ripping of the tube at the last few cuts is also eliminated, thanks to the fine saw teeth. It’s a familiar problem: you want to make a straight cut with the saw, but because of the thin saw blade, every cut you make gets a little more crooked?! Not an issue here. This saw blade is just thick enough not to tilt, but still thin enough to get a precise cut. With Alphacool’s pit saw, every cut is neat and straight, down to the last pull. Technical Specifications: Saw blade length: 35mm Saw blade thickness: 0.8mm Handle: black pistol grip Scope of Delivery: 1x Alphacool pit saw for acryl/PETG tubes 35cm

Deep, intense colors, pleasant handling, and easy installation were the goals when developing this tubing generation. The result is a great choice of sizes and colors such as red, green, blue, or black. When designing these tubes, one goal was to make colored coolant and hence the strain from coloring particles on the cooling loop obsolete. With these tubes, the color comes from the tubes themselves. Besides color, the installation and kinking properties are always an important factor when choosing tubing. Tight bending radii and easy handling in tricky situations were also taken into consideration during development. Hence, the plastic mixture was developed to perfection, and we have created tubing that manages to combine usually opposing properties to please both beginners and advanced users. Manufacturing in Germany promises permanently high quality. The manufacturing with years of experience ensures the best product all the time! Technical specifications: Material: PVC Color: Transparent Inner diameter: 10mm, 3/8“ Outer diameter: 13mm, ½“ Wall thickness: 1.5mm, 1/15“ Extent of delivery: 1x Alphacool AlphaTube HF 13/10 (3/8"ID) - Clear Ordered quantity = Hose length in meters

The Alphacool Eisrohr PETG HardTube givse the user the possibility to create a very special look. With a wall thickness of 3 mm, the tubes are very strong, but can still be bent without great effort and they are easy to fit. PETG HardTubes are probably the easiest to bend compared to those made of other materials. They require significantly less heat than PMMA HardTubes, for example. The Alphacool Eisrohr PETG HardTubes are absolutely clear and will look great in almost every water cooling loop. When cutting the tubes, make sure to chamfer the edges with fine file , sandpaper or the Alphacool Strong Guy pipe and hose deburrer, as sharp edges can damage the O-rings of fittings.Technical data:Outer diameter: 12 mmInner diameter: 9 mmLength: 80 cmMaterial: PETG clearNet weight: 50 g Download data sheet PDF: Alphacool Eisrohr 12/9mm PETG HardTube 80cm - 4pcs

Gut zu verlegender PU-Schlauch, der bei Schwarzlicht grün fluoresziert und für alle Systeme passt! Er kann beispielsweise in Wasserkühlungen eingesetzt werden, aber auch einseitig geschlitzt als Kabelkanal genutzt werden. Als zusätzlicher Mantel für Airflow-Kabel oder auf Kanten verschiedener Komponenten gesteckt wirkt dieser Schlauch besonders gut! Aber natürlich sind auch hier die Möglichkeiten unendlich und der Phantasie keine Grenzen gesetzt. Erlaubt enge Biegeradien. Der Schlauch ist grün und fluoresziert unter UV-Licht grün.Bestellmenge = Schlauchlänge in Metern! Kompatibel mit Anschraubtüllen und Steckverbindern (P&C, Fersto, Legris) Fluoreszenzfarbe: grün Abmaße: 10mm Aussendurchmesser und 8mm Innendurchmesser. (8x1mm)>

Hochwertiger Schlauch aus PVC. Der Schlauch verbindet die positiven Eigenschaften (kleiner Biegeradius) eines PVC Schlauches mit der Knickstabilität eines PUR Schlauches und wurde spziell für die besonderen Anforderungen einer PC Wasserkühlung entwickelt. Der Schlauch wurde speziell für die 10/8mm Verschraubungen entwickelt, und hat aufgrund der etwas größeren Abmaße als 10/8er Schlauch eine engere Passung in der Übermutter. Bei der Montage an der Anschraubtülle empfehlen wir den Schlauch etwas anzufeuchten.Farbe: glasklarAussendurchmesser: 10,3mm Innendurchmesser: 7,5mmBestellmenge = Schlauchlänge in Metern!

Standard hose for almost all applications. Available in different dimensions. Beautifully transparent and flexible, so the hose is easy to lay. Suitable for UV active or coloured water additives. We recommend the use with 13mm hose connectors to achieve an optimal HighFlow effect.Inner diameter 12mmouter diameter 16mmPrice per 1 meterNot suitable for plug-in connections (push-in or P&C) but only for grommets with over-nut or hose connections (e.g. with hose clamp)Please note:Transport and storage conditions may cause the hose to arrive at the customer's premises somewhat "undercooled". Cold PVC hose tends to get a little hard. For optimal installation, we therefore recommend that the hose is either stored in a warm room for a few hours after receipt before installation, or briefly placed in hot (e.g. 60°) water. Then the hose will have reached its optimum bendability.

Deep, intense colors, pleasant handling and easy installation were the goals when developing this tubing generation. The result is a great choice of sizes and colors such as red, green, blue or black.When designing these tubes, one goal was to make colored coolant and hence the strain from coloring particles on the cooling loop obsolete. With these tubes the color comes from the tubes themselves.Besides color, the installation and kinking properties are always an important factor when choosing tubing. Tight bending radiuses and easy handling in tricky situations were also taken into consideration during development. Hence the plastic mixture was developed to perfection and we have created tubing which manages to combine usually opposing properties to please both beginners and advanced users. Manufacturing in Germany promises permanently high quality. The manufacturing with years of experience ensures the best product all of the time!Technical specifications:Material: PVCColor: UV blue transparent Inner diameter: 10mm, 3/8“Outer diameter: 13mm, ½“Wall thickness: 1,5mm, 1/15“Extent of delivery:1x Alphacool Schlauch AlphaTube HF 13/10 (3/8"ID) - UV Blau transparent 3m (9,8ft) Retailbox

Deep, intense colors, pleasant handling and easy installation were the goals when developing this tubing generation. The result is a great choice of sizes and colors such as red, green, blue or black.When designing these tubes, one goal was to make colored coolant and hence the strain from coloring particles on the cooling loop obsolete. With these tubes the color comes from the tubes themselves.Besides color, the installation and kinking properties are always an important factor when choosing tubing. Tight bending radiuses and easy handling in tricky situations were also taken into consideration during development. Hence the plastic mixture was developed to perfection and we have created tubing which manages to combine usually opposing properties to please both beginners and advanced users. Manufacturing in Germany promises permanently high quality. The manufacturing with years of experience ensures the best product all of the time!Technical specifications:Material: PVCColor: UV blackInner diameter: 10mm, 3/8“Outer diameter: 13mm, ½“Wall thickness: 1,5mm, 1/15“Extent of delivery:1x Alphacool Schlauch AlphaTube HF 13/10 (3/8"ID) - UV Schwarz 3m (9,8ft) Retailbox

Hoses are the lifeblood of the water cooling system! Here is the latest generation from Alphacool! Deep, strong colors and pleasant handling when laying and connecting were our specifications when developing the hoses. The product is hoses in different sizes and colors such as red, green, blue or black. When developing the hoses, we deliberately worked to ensure that no more color particles from the coolant would burden the water circuit, but rather that the power of the color comes from the hose. In addition to the color, the way hoses are laid and kinked is of great interest. Bridging tight bending radii and comfortable handling in tricky places were also given priority here. This was optimized to perfection using a variety of plastic mixtures, and we now have a hose that reconciles the opposing goals, which sometimes hinder development, and will convince both beginners and advanced water cooling users! Manufacturing in Germany promises consistently high quality. Manufacturing with years of experience ensures that only the best product is always sold. Technical data: Material: PVC Color: Transparent Inner diameter: 10mm, 3/8“ Outside diameter: 16mm, 5/8" Wall thickness: 3mm Scope of delivery: 1x Alphacool hose AlphaTube HF 16/10 (3/8"ID) - Clear Order quantity = hose length in meters

Tubing is the veins of a water cooling system! These are the next generation, made by Alphacool! Deep, intense colours as well as comfortable handling during installation and connection were our focus in developing these tubes. The result is tubing in a variety of sizes and colours, such as red, green, blue, or black. In developing these tubes, we specifically ensured that there would no longer be any need to deal with colour particles in the coolant fluid, but rather that all the colour would come from the tubing itself. Besides the colour, the installation and bending properties are of course very important in tubing. The ability to span a tight bend radius and comfortable handling in tricky spaces were also emphasised during development. This was optimised to perfection by mixing different combinations of synthetic materials, resulting in tubing that manages to bring opposing goals together in harmony and that will satisfy both amateur enthusiasts and experienced water cooling users! Manufactured in Germany, with the promise of consistent high quality. Our years of manufacturing experience guarantee that any product we sell is the best. Technical Specifications: Material: PVC Colour: UV Blue Inner diameter: 10mm, 3/8" Outer diameter: 13mm, 1/2" Wall thickness: 1.5mm, 1/15" Scope of Delivery: 1x Alphacool Tubing AlphaTube HF 13/10 (3/8"ID) - UV blue 1m (3.3ft) Retailbox