Product description: Mounting bracket for mast - wall distance 30 cm. Made of pipe 60.3 x 3.2.Minimum mast diameter: 38 mm.Maximum mast diameter: 74 mm. Hot-dip galvanized.
The APOE03GS is the Single-Port Gigabit ( 10/100/1000 Base-T) redundant PoE Midspan/Injector with Hi-Power sourge protection that provides DC power for PoE equipped Network Appliance device. It is compatible with devices that support the IEEE 802.3af/at standard PoE power feed using Mode B (Pins 4/5 and 7/8). The APOE03GS fetures surge protection for the data and power feeds for networks. The design utilizes three-pole differential Gas Tubes. The tubes feature ultra-low Line to Line and Line to Ground capacitance to minimize distortion of high-speed signals. The APOE03GS features terminal block for Power redundancy, the power redundancy ensures that vital network capabilities are always available when needed, and also makes life easier for any IT Administrator who just doesn't want to have his sleep or his weekend interrupted by an untimely service call caused by a finicky power supply. Function: Transform DC through RJ-45 cable PIN# 4,5,7,8, into remote devices such as Wireless AP, IP Phone, IP surveillance Camera, etc. With the terminal block connector can be connected to the UPS allowing redundancy in the power source. Key FeaturesInput:1.1 Input Voltage: 5Vdc to 57Vdc, Nominal = 48VdcGeneral Description:2.1 Operation Temperature: -0 ~ 402.2 Storage Temperature: -20 ~ 602.3 Operation Humidity: 10% ~ 80% Non-Condensing2.4 RJ-45 Connector PinOut2.5 DC Power Plug Diameter: 2.1Ø / 5.5Ø , Length: 12 ± 0.5mm2.6 DC Power Plug Polarity: Inside (+), Outside (-)PIN Define RJ-45 Input ( Data ) RJ-45 Output ( Data & Power )PINSymbolSymbol1TXRX A+TXRX A+2TXRX A-TXRX A-3TXRX B+TXRX B+4TXRX C+TXRX C+ DC+5TXRX C-TXRX C- DC+6TXRX B-TXRX B-7TXRX D+TXRX D+ DC-8TXRX D-TXRX D- DC-
DualBand 2.4GHz 2dBi and 5GHz 3dBi Indoor Omni Antenna for StationBox InSpot. Compact Indoor Omni-Directional Antenna designed to be used with MikroTik™ RouterBoard™ RB912/RB711 when installed inside of StationBox® InSpot. Direct connection to MMCX port of integrated radio eliminates pigtails saves cost and decreases RF losses. Installation is super quick and easy.
Anti-noise shield for MikroTik RouterBOARD wAP. Substantially reduces interference from nearby devices. CNC technology used in manufacturing process, shield is made with needes precision. Shield is made entirely from grey coated aluminium.
Technical Data: Connector type: N male Frequency: 698-960MHz 1710-2700MHz Gain: 698-960MHz - 4dBi 1710-2700MHz - 5dBi VSWR ≤ 4 Radiation Omni Material UV Plastic Mount type Wall Cable length 3m
ItemSpecificationsFrequency Range698~960MHz/1710~2690MHzPolarizationLinearGain3.5dBiV.S.W.R＜3.0Impendance50ΩCableRG174ConnectorSMARadome MaterialABSMounting MethodScrewOperating Temperature -40℃~+85℃ Relative HumidityUp to 95%Ingress ProtectionIP67Vibration10 to 55Hz with 1.5mm amplitude 2hoursEnvironmentally FriendlyROHS CompliantCable Length1.5m
Wall mount bracket for client antennas installation to the wall. The mounting system comes with 4 holes for bolts. Wall Mount Bracket , galvanized steel Product description: Wall mounted bracket to hold satellite dishes or UHF Aerials / AntennasLength: 250mm Stand Off from the wallDiameter: 38 mmMaterial: Galvanized steel with black plastic capweight: 1.25 kg
Features:Solid color design, dirtproof and wear resistant.Flat wire design, not easy to be broken off.One-to-Two interface, convenient to use.Special male to female extension cord for car use.It is covered by premium PVC, durable. Description:60cm long size design, practical.A small accessory for you to use in daily life.Exquisite workmanship, high quality and reasonable price. Specifications:Material: PVC+tinned copper wireColor: blackSize: 60cm Package Included:1 x OBD Cable
Anti-noise shield for RouterBOARD SXT LTE and RouterBOARD SXT LTE kit substantially reduces interference generated by nearby electronic devices.It lowers noise levels improving signal quality.Shield is made from aluminium coated with light grey paint, that perfectly blends in with SXT.Designed and manufactured using state-of-the-art CNC machines, it is beautifully made with needed precision.* - Mikrotik SXT-LTE and pole are shown for demonstration purposes only and sold separately!
Mini wall mount bracket for client antennas installation to the wall. The mounting system comes with 2 holes for bolts. It's made from galvanized steel. The dimensions: height: 100 mm width: 40 mm distance from a wall: 155 mm diameter: 38 mm weight: 0,5 kg
Thanks to Rust-proof aluminium construction from 2mm thick, PA11 aluminium sheet metal. Max. pole diameter: 50mmAdjustment: vertical 50°, horizontal 20°.Price for 1 piece of mouting. * - MikroTik RBLHGG-60ad kit and pole are shown for demonstration purposes only and sold separately!
Symmetrical Horn CC Antennas Gen2 offer unique RF performance in a compact package. Scalar horn antennas have symmetrical main beam with identical beam width in Vertical and Horizontal plane. Exceptionally small side lobes ensure remarkable interference suppression. HG3-CC Gen2 Antennas are ideal for coverage of areas with clients close to the installation site, where null zone issues exist. High density AP clusters and radio co-location is made possible due to unique radiation patterns and compact size.Symmetrical Horn CC Antennas Gen2 feature multiple improvements of RF performance and design, namely, optically lighter body and significantly improved bracket. Radome is made of more resistant material, and all of HG3-CC Gen2 antennas use only two radome sizes. HG3-CC Gen2 antenna is equipped with N-female connectors.30° Symmetrical Beam Antenna HG3-CC-S30Frequency Range: 5180 - 6400 MHzGain: 18.4 dBiAzimuth Beam Width -6 dB: H 30° / V 30°Elevation Beam Width -6 dB: H 30° / V 30°Mechanical Tilt: ± 25°Pole Mounting Diameter: 30 - 90 mmUnique Beam PerformanceSymmetrical Horn TP Antennas have a unique beam shape and characteristics. The beam section is circular: azimuth and elevation radiation angles are identical.N-type ConnectorsSymmetrical Horn Carrier Class Antennas feature N-type female connectors, used with wide range of Radios. For example, mimosaTM, Cambium NetworksTM PMP450, LigoWaveTM, and many others. Users of UBNTTM Rocket M5 Titanium, MikroTikTM connectorized radios (NetBoxTM, BaseBoxTM and NetMetalTM) can also utilize coaxial ports on Carrier Class Symmetrical Horn Antennas.
Use of an antenna connected to the modem - router allows a considerable increase transmission speed by increasing the signal level. The antenna is made in microstrip technology of high-quality materials, fully resistant to weather conditions (humidity, wind, UV radiation). It is the only dual antenna of this type on the market. The antenna is tuned to the latest technology for 5G LTE frequency 700 - 800 MHz.The antenna has been specially designed for Internet access services in the network 5G PLAY CYFROWYPOLSAT, Plus GSM, Orange, T-Mobile, Aero2, and other GSM operators around the world. The antenna has a gain of up to 14dBi and helps you to improve your connection even on long distances. To get the best result the 2G/3G/4G/5G antenna should aligned exactly to the transmitter base station it is connected to. Improves range of services at the LTE 5G, 4G, 3G, 2G from 700 MHz to 950 MHz This 4G antenna works perfectly with LTE / 4G devices which have external antenna port. Compatible 4G Routers with external SMA female antenna port: - Telekom Speedport LTE, Speedport LTE II - Telekom Speedbox LTE, SpeedBox LTE II, SpeedBox LTE III - Telekom Speedport Hybrid - Vodafone Easybox 904 LTE - Vodafone B1000, B2000, B3000 - Vodafone LTE-Modem - Vodafone LTE-Turbobox LG FM300 - O2 LTE Router - FritzBox LTE- Router (except FritzBox LTE 6842) - D-Link DWR-921 - Huawei B390, B593, B890 - Huawei E5186 - Teltonika RUT230, RUT240, RUT500, RUT550, RUT900, RUT905, RUT950, RUT955 - Many more... The enclosure of the antenna is made of solid plastic and stainless steel. The robust, light weight and UV resistant construction is weatherproof. This allows to use this 5G antenna for outdoor appliances. The antenna is designed for mast/pole or wall handle installation. A mounting kit (angle bracket and u-clamp for 30-50mm diameter handles) is included. Product specifications Gain 2x 14dBi @ 700-950 MHz Impedance 50 Ohm Frequency Range 700-950Mhz VSWR max 1.7 Polarisation Horizontal / Vertical Beam Width 30° Horizontal, 25° Vertical Connector 2 x N female Appliance Indoor and Outdoor Operating Temperature -30° to 75° C Max wind load 200km/h Dimensions 47cm x 30cm x 15cm Weight 1.6kg Color White
16HV 5G LTE MIMO antenna is designed to handle communications LTE 5G. The antenna allows you to increase the range in suburban areas and in areas with weak signal 5G 3.4-3.8 GHz. The antenna has two female connector N. Due to the small size and attractive appearance is a good antenna and aesthetic choice for any location for demanding clients Application antenna connected to the modem - router allows you to significantly increase the transmission speed by increasing the signal level. The antenna is made in microstrip technology of high-quality materials, fully resistant to weather conditions (humidity, wind, UV radiation). It is the only dual antenna of this type on the market. The antenna is tuned to the latest technology for 5G LTE frequency 3.4-3.8 GHzThe antenna has been specially designed for Internet access services in the network 5G PLAY CYFROWYPOLSAT, Plus GSM, Orange, T-Mobile, Aero2, and check for GSM operators around the world. The enclosure of the antenna is made of solid plastic and stainless steel. The robust, light weight and UV resistant construction is weatherproof. This allows to use this 5G antenna for outdoor appliances. The antenna is designed for mast/pole or wall handle installation. A mounting kit (angle bracket and u-clamp for 25-50mm diameter handles) is included. Product specifications Gain 2x 16dBi Impedance 50 Ohm Frequency Range 3.4-3.8Ghz VSWR max 1.5 Polarisation Horizontal / Vertical Beam Width 35° Horizontal, 37° Vertical Connector 2 x N female Appliance Indoor and Outdoor Operating Temperature -30° to 75° C Max wind load 200km/h Dimensions 32cm x 17cm x 5cm Weight 0.6kg Color White
QuRouter X09S is a perfect outdoor LTE Cat 6 router with embedded GNSS/GPS module. Equipped with Dual-SIM with 4G connectivity redundancy failover. Integrated with omnidirectional LTE MIMO 2x2 antenna and GPS antenna. This device is perfect for advanced Industrial and Enterprise applications. Quad Core ARM Cortex A7 717 MHz CPU and 256 MBytes DDR3 RAM assures smooth VPN data acquisition. LTE Cat 6 with speeds up to 300 Mbps All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 GPS/GNSS positioning with geofencing functionality Dual SIM with auto Failover Passive PoE support
QuRouter 950S is a professional industrial LTE Cat 4 & Wi-Fi router for IoT applications. Integrated with omnidirectional LTE and Wi-Fi antennas. This rugged device delivers high performance cellular communication in harsh environments and a wide operating temperature range. The router is equipped with 4G connectivity redundancy through dual SIM failover. LTE Cat 4 with speeds up to 150 Mbps All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Wireless Access Point with Hotspot functionality Dual SIM with auto Failover Passive PoE support
QuRouter 240S is a cost-effective and powerful outdoor industrial LTE Cat 4 & Wi-Fi router for professional application. Integrated with omnidirectional LTE and Wi-Fi antennas. The mobile router delivers high performance for mission-critical cellular communication in harsh and hazardous environments where a wide operating temperature is required. Equipped with an external SIM holder. LTE Cat 4 with speeds up to 150 Mbps All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Wireless Access Point with Hotspot functionality Antenna perfectly matched with the router Passive PoE support
for internal useequipped with a guide for easy fixing of cablesport designations using numberscompatible with LSA tools24x unshielded RJ45 jackstested measured with cat. 6 UTP cable on the 90m section with the Fluke Networks metermeets the requirements of category 6 UTP.
Overview Alfa Power over Ethernet (PoE) Splitter PD-1000R (support DC output 5V, 9V, 12V, 18V) is revolutionary technology for powering Ethernet terminals such as IP Telephone sets, wireless access point, and Internet camera. The technology incorporates electrical power onto a LAN data line enabling the delivery of operating power in addition to data communicate to terminals over standard cabling infrastructure. Key Features · Convey power and data to your LAN equipment through Ethernet cable. · Standard IEEE802.3at/af. 24watt · Support 5V, 9V, 12V, 18V output adjustable. · Regulate output voltage by switch. · Delivering power and data to equipment. · Support Gigabit Ethernet. · Additional +/- 15KV of Ethernet isolation for ESD/Surge Protection.
Overview Alfa Power over Ethernet (PoE) Splitter PD-1000T (support DC output 12V) is revolutionary technology for powering Ethernet terminals such as IP Telephone sets, wireless access point, and Internet camera. The technology incorporates electrical power onto a LAN data line enabling the delivery of operating power in addition to data communicate to terminals over standard cabling infrastructure. Key Features · Support 12V output · Delivering power and data to equipment. · Support Gigabit Ethernet. · Additional +/- 15KV of Ethernet isolation for ESD/Surge Protection.
The Mimosa A5 access point delivers cutting-edge multipoint technology for service providers to affordably deliver the industry’s first scalable gigabit wireless broadband network.Fiber Speed AccessCapable of delivering the speed business users and consumers need at a fraction of the cost of delivering fiber to the premise.Network-Wide Cloud ControlMimosa Cloud makes deployment a breeze, interacting with devices network-wide to proactively assist the A5to optimize network and subscriber experience for the best performance and capacity management.Working Above the NoiseAdvanced auto-gain control techniques automatically squelch out underlying interference with only 10 dB of operating margin required to deliver incredible client performance.Compact and FastWith up to 1.5 Gbps of total capacity, the A5 is the industry’s fastest multipoint solution in a tiny form factor, making suburban rooftop or urban installation a fast, easy, and discrete solution.Network Scalability PerfectedUnique integrated high precision GPS Sync technology allows every deployed device to be collaboratively synchronized across the network, allowing easy channel reuse to save spectrum network-wide.* - comes with EU and US power plugs
HG3-CC-A2020° Asymmetrical Horn CC AntennaGame Changing Sector AntennasAsymmetrical Horn CC Antennas provide unique asymmetrical beam shape while maintaining excellent noise rejection and overall excellent performance of a well designed horn antenna with N-female connectors. Enabling new levels of network scalability and throughput increase. Asymmetrical Horn CC antennas complement the successful Symmetrical Horn Antennas. Unique Asymmetrical BeamAsymmetrical Horn CC Antennas have unique beam shape. The beam cross-section in bore sight is elliptical: wide in azimuth and narrow in the elevation plane. This is useful for deployments where asymmetrical beam shape delivers better coverage. No Side LobesAsymmetrical Horn CC Antennas have naturally suppressed side lobes because of their optimized design: they focus energy into a single main beam. Absence of side lobes enables excellent noise immunity of a network when using Asymmetrical Horn CC Antennas. Wide Band Performance The radiation pattern of Asymmetrical Horn CC Antennas is stable over the whole band width of operation. Balanced H + V BeamsAsymmetrical Horn CC Antennas have balanced Horizontal and Vertical beam patterns. Balanced H+V beams are very difficult to achieve for antenna with asymmetrical beam shape and this is the area where all competitive products on the market fail. Balanced H+V beams are critical feature for stable link performance when switching channels. Gain PerformanceAsymmetrical Horn CC Antennas have higher gain compared to Symmetrical Horn Antennas with the same azimuth beam width. Asymmetrical Horn CC Antennas cover ultra-wide frequency range: 5180-6000 MHz with excellent VSWR performance. Perfect Coverage PatternMainstream patch array sector antennas have radiation pattern extremely wide in the azimuth and extremely narrow in the elevation plane. If an AP is deployed on a tall tower, customers near the tower suffer from low AP signal level. Asymmetrical Horn CC Antennas provide valuable extra degrees of the elevation beam width, shrinking the null zone while preserving the increased gain for long-range performance. Breakthrough Scalability: ExpandedRF elements® Horn CC Antennas enable extraordinary network scalability. Asymmetrical Horn CC Antennas are a new addition to the toolbox of a modern WISP. Unique beam performance, precise radiation patterns, and increased gain push system scalability even further. N-type ConnectorsAsymmetrical Horn CC Antennas feature N-female connectors, used with a wide range of radios, such as MimosaTM A5c, Cambium NetworksTM PMP 450, LigoWaveTM, and many others. Built Like a TankAsymmetrical Horn CC Antennas have solid aluminium body, built to last and resist any weather conditions. We use the most suitable materials: die cast, stamped, and extruded aluminium; stainless steel, high quality ABS plastic, and high density polyethylene. Innovative BracketAsymmetrical Horn CC Antennas feature an innovative mounting system. The mount is separated from the antenna, making the installation and adjustment quick and easy. Step 1: Bracket InstallationFirst install the bracket on the pole. The pole bracket is reversible: it can be mounted on the left or the right side of the antenna. Step 2: Antenna AdjustmentSimply slide the antenna in the bracket and adjust the elevation and the azimuth. Tighten the screws to finish the installation.Only one tool is needed for the entire installation.
The quickMOUNT extra is a advanced wall mount adapter for large point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT extra gives possibility to turn antenna within 190°. With the quickMOUNT extra is compatible with our long range heavy antennas like 30dBi parabolic dish mANT 30 or 19dBi sector mANT 19s.
Share your 4G data plan even when 4G tower is far wayIdeal for mobile home RV and boatThe new generation of Alfa Network 4G CampProThis is a special kit shipping in one retail box that features all of the equipment as shown on the product image designed to pick up a weak 4G signal and repeat it as your own personal hotspot. This is ideal for use during camping or in boats RVs and campers.The best affordable solution for turning 4G to a Wifi Internet HotspotUser Friendly – Mobile friendly web page supports QR code scanning for easy setup so you can enjoy Internet access in minutesVehicle Surge Protection – Special design to prevent accidental damage from vehicle spikes during ignitionIncluded in the box:– Alfa R36AH USB router– Indoor Antenna ARS -N05– Tube-4G USB receiver + 8m (26 ft) USB cable– 12V power supply for R36– Tube-4G needs no power supply draws power from the R36 via USB cable– waterproof tape and wire ties for mounting Tube to pole– R36 car/vehicle power supply adapterHow it works4G to Wifi Converter Kit – Use all three of these components above together to boost and convert a 4G signal to a Wi-Fi signal. Simply connect your computer to the R36AH via ethernet cable for a one-time configuration and setup. Put a SIM-card to the Tube-4G (make sure the SIM-card is on a 4G plan or recharged). Connect the AOA-M4G antenna to the Tube-4G receiver and then connect the Tube-4G to the USB port on the R36AH. Use the Wi-Fi scanning software built-into the R36AH that you will see during the setup wizard so you can scan for and connect to the new wireless networks in your area. Once the R36A has connected to a network you will be prompted to name and password protect your own new local Wi-Fi network offering any device within a few hundred feet the ability to use the same distant Wi-Fi signal.RangeThere is no specific range that can be computed as range can vary greatly based on environment and environmental factors like obstacles and interference. We recommend using this in an area where other devices can at least get a weak signal to the desired network such as one bar. If the environment is such that your devices cannot even see the desired network form the place of intended use the Camp Pro may not work well there.
JE-250 S2T - lock by non-lose screws two cable glands instalation by bracketTechnical parametersInner size 246 x 185 x 61/50 mmMaterial Aluminum alloy with high corrosion protectionWeight 1.5 kg Specification:GentleBOX JE-250 Alu is an ideal metal outdoor box for installation of electronicsMetal body assures rezistance against interferences hight rezistance against lightning and waterBox included ventilation plug for the best water protectionssembling screws and plastic self-hold distance tubes (8/8 pcs)Easy to instal on mast or wall - variableThe package includes cable gland which is secured against spinning by specially molded retaining linesHinge with end stop for cable glands protectionUBNT Rocket instalation by GentleCLIPReady for easy instalation Mikrotik RouterBoards RB 411 RB911 RB912 RB433 RB493 others by sheet (not including the package)
Technical parameters:Outer size 203 x 203 x 65 mmInner size 186 x 186 x 53 mmMaterial UV steady plastic ABS PolyamideInstalation for mast ø 19 - 54 mm. Specification:GentleBOX is an outdoor box for AP RouterBOARDs and other electronics with a unique system of the grooves and holes for easy installationEasy installation without drilling you require only 1 flat and 2 cross-shaped (PH1 and PH2) screwdrivers and the spanner "10" for complete installationThe package includes cable gland secured against spinning by specially molded retaining linesGentleBOX is prearranged for easy mounting of RB411 Package contents:Screws and plastic distance piers for easy installation of the electronics (4/4pcs)Easy to use self-holding plastic piersNon-losable bayonet locks MS-1 for easy closure (4pcs) - it is recommended to lubricate them with vaseline or siliconeSpecial bracket for the mast ø 19 - 54 mm (1pcs)Cable gland Pg11 for cable ø 4 - 10 mm (1pcs)Cable gland M20 for cable ø 4 - 10 mm you can put the connector RJ45 through (1pcs)
QuPS4Outdoor power socket & plug - 4 PIN set (pin and input/output)Outdoor power socket & plug 4 PIN set (2 pin for power and 2 pin for digital INPUT/OUTPUT) for all cases where the User doesn’t want to use Passive PoE powering feature in all QuWireless antennas or need access to digital INPUT/OUTPUT from outside of the QuRouter or antenna.
