- Simple Power up 8 Passive Gigabit PoE devices by one power source.- Power by DC jack or Terminal Block connector.- Application use for AP, IP camera, IP phones.Input Power: 12VDC - 48VDCOutput Power: Depends on Input PowerConnectors: Data In - RJ45, Power In - DC jack or Terminal Block Connector, Data+Power Out: RJ45DC Plug Connector: 2.1 x 5.5 mmData Rate: 10/100/1000MbpsRJ45 PIN Define: Data: all PIN, Power: (+)4,5 (-)7,8
Simple Power up 8 Passive 100Mbps PoE devices by one power source. Power by DC jack or Terminal Block connector. Switch On/Off button to save electricity while not use. Application use for AP, IP camera, IP phones.SpecificationsInput Power: 12VDC - 48VDCOutput Power: Depends on Input PowerConnectors: Data In - RJ45, Power In - DC jack or Terminal Block Connector, Data+Power Out: RJ45DC Plug Connector: 2.1 x 5.5 mmData Rate: 10/100MbpsRJ45 PIN Define: Data: all PIN, Power: (+)4,5 (-)7,8
This high gain directional multiband 4G panel antenna is designed for 800MHz (2G / 4G), 900Mhz (4G), 1800MHz (3G / 4G), 2100MHz (4G) and 2600MHz (4G) frequency band and supports all established standards like GSM, 2G, 3G and 4G (800 / 900 / 1800 / 2100 / 2600). The antenna has a gain of up to 14dBi and helps you to improve your 2G, 3G or 4G connection even on long distances. To get the best result the 2G/3G/4G antenna should aligned exactly to the transmitter base station it is connected to. This 4G antenna works perfectly with LTE / 4G devices which have external antenna port. Compatible 4G Routers with external SMA female antenna port:- Telekom Speedport LTE, Speedport LTE II- Telekom Speedbox LTE, SpeedBox LTE II, SpeedBox LTE III- Telekom Speedport Hybrid- Vodafone Easybox 904 LTE- Vodafone B1000, B2000, B3000- Vodafone LTE-Modem- Vodafone LTE-Turbobox LG FM300- O2 LTE Router- FritzBox LTE- Router (except FritzBox LTE 6842)- D-Link DWR-921- Huawei B390, B593, B890- Huawei E5186- Teltonika RUT230, RUT240, RUT550, RUT950, RUT955- Many more... Optionally we offer a pair of antenna cables of type RF240 with a length of 2.5m, 5m, 10m and 20m with N male to SMA male (fits to the most common LTE routers - see list above) connectors. The enclosure of the antenna is made of solid plastic and stainless steel. The robust, light weight and UV resistant construction is weatherproof. This allows to use this 4G antenna for outdoor appliances. The antenna is designed for mast/pole or wall handle installation. A mounting kit (angle bracket and u-clamp for 30-50mm diameter handles) is included. Product specificationsType of AntennaDirectional 2G/3G/4G LTE Antenna (2x2 MIMO)Gain10dBi @ 800-900 MHz, 14dBi @ 1800MHz-2600MHzImpedance50 OhmFrequency Range800-2600MhzVSWRmax 1.6GroundDC-GroundPolarisationHorizontal / Vertical (Linear)Beam Width30° Horizontal, 25° VerticalConnector2 x N femaleApplianceIndoor and OutdoorOperating Temperature-30° to 75° CMax input power50WMax wind load200km/hDimensions47cm x 31cm x 5cmWeight1.5kgColorWhiteDirectivityBi-Directional
This high gain directional multiband 4G panel antenna is designed for 2300-2600MHz (4G) frequency band and supports standards like 4G band 7 (2600Mhz) and band 40 (2300Mhz). The antenna has a gain of up to 17dBi and helps you to improve your 4G connection even on long distances. To get the best result the 4G antenna should aligned exactly to the transmitter base station it is connected to. This 4G antenna works perfectly with LTE / 4G devices which have external antenna port. Compatible 4G Routers with external SMA female antenna port:- Telekom Speedport LTE, Speedport LTE II- Telekom Speedbox LTE, SpeedBox LTE II, SpeedBox LTE III- Telekom Speedport Hybrid- Vodafone Easybox 904 LTE- Vodafone B1000, B2000, B3000- Vodafone LTE-Modem- Vodafone LTE-Turbobox LG FM300- O2 LTE Router- FritzBox LTE- Router (except FritzBox LTE 6842)- D-Link DWR-921- Huawei B390, B593, B890- Huawei E5186- Teltonika RUT230, RUT240, RUT550, RUT950, RUT955- Many more... Optionally we offer a pair of antenna cables of type RF240 with a length of 2.5m, 5m, 10m and 20m with N male to SMA male (fits to the most common LTE routers - see list above) connectors. The enclosure of the antenna is made of solid plastic and stainless steel. The robust, light weight and UV resistant construction is weatherproof. This allows to use this 4G antenna for outdoor appliances. The antenna is designed for mast/pole or wall handle installation. A mounting kit (angle bracket and u-clamp for 30-50mm diameter handles) is included. Product specificationsType of AntennaDirectional 4G LTE Antenna (2x2 MIMO)Gain17dBi @ 2300 MHz, 17dBi @ 2600MHzImpedance50 OhmFrequency Range2300-2600MhzVSWRmax 1.6GroundDC-GroundPolarisationHorizontal / Vertical (Linear)Beam Width35° Horizontal, 32° VerticalConnector2 x N femaleApplianceIndoor and OutdoorOperating Temperature-30° to 75° CMax input power50WMax wind load200km/hDimensions47cm x 25cm x 3cmWeight1.5kgColorWhiteDirectivityBi-Directional
Professional omni dual antenna with gain 9dBi that works in frequency range 850 MHz - 2600MHz. Due to its characteristics antenna significantly amplifies the signal and provides an opportunity to enjoy fast access to the Internet wherever it is necessary. Moreover antenna is equipped with a magnet at the base, which allow to mount the antenna on the vehicle's roof or other metal surfaces. Antenna comes with a 3m long RG174U cable. Frequency range: LTE - 900/2100/1800/2600 MHz DC-HSPA+/HSPA+/UMTS - 900/2100MHz GSM/GPRS/EDGE - 850/900/1800/1900MHz VSWR:
DDC-4824POE is the +/- 48VDC to 24VDC Dual-Input ( DC / Terminal block) PoE adapter, which design for telecom -48VDC environment to support passive 24V PoE outdoor AP/CPE device such as Ubiquiti, Mikrotik and Alfa Network or other passive 24V PoE device. With Redundant Dual-Input, it make your life easy and you don’t need to worry if electronic power drop.
The APOE03 Power over Ethernet (PoE) Passive Injector delivers both data and electrical power to passive PoE devices using a single Ethernet cable. Using PoE you eliminate the need to place an Ethernet device, such as a wireless access point or IP Camera giving you more freedom. The installation is simple and easy for APOE03 it does not require any tools or software. Plug the APOE03 into a power outlet and connect the APOE03 to your passive PoE device using any standard Ethernet cable. Once APOE03 setup has been completed the output power is compatible to any 5VDC, 12VDC, 24VDC, 48VDC, 57VDC (Max. 48W) Passive PoE-enable device. Key Features Support Fast Ethernet Passive PoE-enable device (PIN 1/2/3/6 Data. PIM 4/5/7/8 Power) Provide both data and electrical power to Passive PoE-enabled device Support Wide Range input/output DC Power (5V – 57V at Max.48W) Dual DC Power Input – 3-pin Screw Terminal Block and Power Jack Wall mount ability
Professional omni dual antenna with gain 9dBi that works in frequency range 850 MHz - 2600MHz. Due to its characteristics antenna significantly amplifies the signal and provides an opportunity to enjoy fast access to the Internet wherever it is necessary. Moreover antenna is equipped with a magnet at the base, which allow to mount the antenna on the vehicle's roof or other metal surfaces. Antenna comes with a 3m long RG174U cable. Frequency range: LTE - 900/2100/1800/2600 MHz DC-HSPA+/HSPA+/UMTS - 900/2100MHz GSM/GPRS/EDGE - 850/900/1800/1900MHz VSWR:
Professional omni dual antenna with gain 9dBi that works in frequency range 850 MHz - 2600MHz. Due to its characteristics antenna significantly amplifies the signal and provides an opportunity to enjoy fast access to the Internet wherever it is necessary. Moreover antenna is equipped with a magnet at the base, which allow to mount the antenna on the vehicle's roof or other metal surfaces. Antenna comes with a 3m long RG174U cable. Frequency range: LTE - 900/2100/1800/2600 MHz DC-HSPA+/HSPA+/UMTS - 900/2100MHz GSM/GPRS/EDGE - 850/900/1800/1900MHz VSWR:
Ethernet Surge Protector SP-8P-D is a device that effectively protects Ethernet network aganist surges arising as a results of inducing charges of high voltage. Charges generated durinSurge g atmospheric discharges demage the Ethernet ports on network devices. They can also cause damage to the ientire system, often rather expensive. The guarantee imposed by the manufacturer does not cover this type of demage and must be repaired at the cost of the owner. Ethernet Surge Protector collects the loads induced in the network and safely transfers it to the ground, which effectively prevents demage resulting to the surges. Ethernet Surge Protectors prevent quite a lot of devastating damages to valuable computer systems and other networking equipment every year. Lighting surge protector will ensure peace of mind, as you know that your devices are safe, even in the midst of thunder-storms.
ItemSpecificationsAntennaFrequency Range824~960/1710~2170MHzPolarizationLinearGain2dBi（Zenith）V.S.W.R＜2.0Impendance50ΩMechanical CableRG174 or othersConnectorSMA or othersRadome MaterialABSMounting MethodScrewEnvironmentalOperating Temperature -40℃~+85℃ Relative HumidityUp to 95%Ingress ProtectionIP67 (exclude cable outlet)Vibration10 to 55Hz with 1.5mm amplitude 2hoursEnvironmentally FriendlyROHS Compliant
Wall mount bracket for client antennas installation to the wall. The mounting system comes with 4 holes for bolts. Wall Mount Bracket , galvanized steel Product description: Wall mounted bracket to hold satellite dishes or UHF Aerials / AntennasLength: 350mm Stand Off from the wallDiameter: 38 mmMaterial: Galvanized steel with black plastic capweight: 1.25 kg
Wall mount bracket for client antennas installation to the wall. The mounting system comes with 4 holes for bolts. Wall Mount Bracket , galvanized steel Product description: Wall mounted bracket to hold satellite dishes or UHF Aerials / AntennasLength: 450mm Stand Off from the wallDiameter: 38 mmMaterial: Galvanized steel with black plastic capweight: 1.39 kg
Wall mount bracket for client antennas installation to the wall. The mounting system comes with 4 holes for bolts. Wall Mount Bracket , galvanized steel Product description: Wall mounted bracket to hold satellite dishes or UHF Aerials / AntennasLength: 600mm Stand Off from the wallDiameter: 38 mmMaterial: Galvanized steel with black plastic capweight: 1.6 kg
Product description Steel Pipe Mount Front L 250mm with fixing the pipe / mast (balcony railings), you can install using plugs. Details: Length: 250mmHeight: 220mmPipe diameter: 38mmWeight: 1.15Galvanised
Product description Steel Pipe Mount Front L 400mm with fixing the pipe / mast (balcony railings), you can install using plugs. Details: Length: 400mmPipe diameter: 38mmWeight: 1.35Galvanised
Product description Steel Pipe Mount Front L 1000mm with fixing the pipe / mast (balcony railings), you can install using plugs. Details: Length: 1000mmPipe diameter: 38mmWeight: 1.96Galvanised
Product description Steel Pipe Mount Front L 450mm with fixing the pipe / mast (balcony railings), you can install using plugs. Details: Length: 450mmHeight: 220mmPipe diameter: 38mmWeight: 1.25Galvanised
Product description: Mounting bracket for mast - wall distance 30 cm. Made of pipe 60.3 x 3.2.Minimum mast diameter: 38 mm.Maximum mast diameter: 74 mm. Hot-dip galvanized.
