16HV 5G LTE MIMO antenna is designed to handle communications LTE 5G. The antenna allows you to increase the range in suburban areas and in areas with weak signal 5G 3.4-3.8 GHz. The antenna has two female connector N. Due to the small size and attractive appearance is a good antenna and aesthetic choice for any location for demanding clients Application antenna connected to the modem - router allows you to significantly increase the transmission speed by increasing the signal level. The antenna is made in microstrip technology of high-quality materials, fully resistant to weather conditions (humidity, wind, UV radiation). It is the only dual antenna of this type on the market. The antenna is tuned to the latest technology for 5G LTE frequency 3.4-3.8 GHzThe antenna has been specially designed for Internet access services in the network 5G PLAY CYFROWYPOLSAT, Plus GSM, Orange, T-Mobile, Aero2, and check for GSM operators around the world. The enclosure of the antenna is made of solid plastic and stainless steel. The robust, light weight and UV resistant construction is weatherproof. This allows to use this 5G antenna for outdoor appliances. The antenna is designed for mast/pole or wall handle installation. A mounting kit (angle bracket and u-clamp for 25-50mm diameter handles) is included. Product specifications Gain 2x 16dBi Impedance 50 Ohm Frequency Range 3.4-3.8Ghz VSWR max 1.5 Polarisation Horizontal / Vertical Beam Width 35° Horizontal, 37° Vertical Connector 2 x N female Appliance Indoor and Outdoor Operating Temperature -30° to 75° C Max wind load 200km/h Dimensions 32cm x 17cm x 5cm Weight 0.6kg Color White
QuRouter X09S is a perfect outdoor LTE Cat 6 router with embedded GNSS/GPS module. Equipped with Dual-SIM with 4G connectivity redundancy failover. Integrated with omnidirectional LTE MIMO 2x2 antenna and GPS antenna. This device is perfect for advanced Industrial and Enterprise applications. Quad Core ARM Cortex A7 717 MHz CPU and 256 MBytes DDR3 RAM assures smooth VPN data acquisition. LTE Cat 6 with speeds up to 300 Mbps All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 GPS/GNSS positioning with geofencing functionality Dual SIM with auto Failover Passive PoE support
QuRouter 950S is a professional industrial LTE Cat 4 & Wi-Fi router for IoT applications. Integrated with omnidirectional LTE and Wi-Fi antennas. This rugged device delivers high performance cellular communication in harsh environments and a wide operating temperature range. The router is equipped with 4G connectivity redundancy through dual SIM failover. LTE Cat 4 with speeds up to 150 Mbps All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Wireless Access Point with Hotspot functionality Dual SIM with auto Failover Passive PoE support
Overview Alfa Power over Ethernet (PoE) Splitter PD-1000R (support DC output 5V, 9V, 12V, 18V) is revolutionary technology for powering Ethernet terminals such as IP Telephone sets, wireless access point, and Internet camera. The technology incorporates electrical power onto a LAN data line enabling the delivery of operating power in addition to data communicate to terminals over standard cabling infrastructure. Key Features · Convey power and data to your LAN equipment through Ethernet cable. · Standard IEEE802.3at/af. 24watt · Support 5V, 9V, 12V, 18V output adjustable. · Regulate output voltage by switch. · Delivering power and data to equipment. · Support Gigabit Ethernet. · Additional +/- 15KV of Ethernet isolation for ESD/Surge Protection.
The Mimosa A5 access point delivers cutting-edge multipoint technology for service providers to affordably deliver the industry’s first scalable gigabit wireless broadband network.Fiber Speed AccessCapable of delivering the speed business users and consumers need at a fraction of the cost of delivering fiber to the premise.Network-Wide Cloud ControlMimosa Cloud makes deployment a breeze, interacting with devices network-wide to proactively assist the A5to optimize network and subscriber experience for the best performance and capacity management.Working Above the NoiseAdvanced auto-gain control techniques automatically squelch out underlying interference with only 10 dB of operating margin required to deliver incredible client performance.Compact and FastWith up to 1.5 Gbps of total capacity, the A5 is the industry’s fastest multipoint solution in a tiny form factor, making suburban rooftop or urban installation a fast, easy, and discrete solution.Network Scalability PerfectedUnique integrated high precision GPS Sync technology allows every deployed device to be collaboratively synchronized across the network, allowing easy channel reuse to save spectrum network-wide.* - comes with EU and US power plugs
HG3-CC-A2020° Asymmetrical Horn CC AntennaGame Changing Sector AntennasAsymmetrical Horn CC Antennas provide unique asymmetrical beam shape while maintaining excellent noise rejection and overall excellent performance of a well designed horn antenna with N-female connectors. Enabling new levels of network scalability and throughput increase. Asymmetrical Horn CC antennas complement the successful Symmetrical Horn Antennas. Unique Asymmetrical BeamAsymmetrical Horn CC Antennas have unique beam shape. The beam cross-section in bore sight is elliptical: wide in azimuth and narrow in the elevation plane. This is useful for deployments where asymmetrical beam shape delivers better coverage. No Side LobesAsymmetrical Horn CC Antennas have naturally suppressed side lobes because of their optimized design: they focus energy into a single main beam. Absence of side lobes enables excellent noise immunity of a network when using Asymmetrical Horn CC Antennas. Wide Band Performance The radiation pattern of Asymmetrical Horn CC Antennas is stable over the whole band width of operation. Balanced H + V BeamsAsymmetrical Horn CC Antennas have balanced Horizontal and Vertical beam patterns. Balanced H+V beams are very difficult to achieve for antenna with asymmetrical beam shape and this is the area where all competitive products on the market fail. Balanced H+V beams are critical feature for stable link performance when switching channels. Gain PerformanceAsymmetrical Horn CC Antennas have higher gain compared to Symmetrical Horn Antennas with the same azimuth beam width. Asymmetrical Horn CC Antennas cover ultra-wide frequency range: 5180-6000 MHz with excellent VSWR performance. Perfect Coverage PatternMainstream patch array sector antennas have radiation pattern extremely wide in the azimuth and extremely narrow in the elevation plane. If an AP is deployed on a tall tower, customers near the tower suffer from low AP signal level. Asymmetrical Horn CC Antennas provide valuable extra degrees of the elevation beam width, shrinking the null zone while preserving the increased gain for long-range performance. Breakthrough Scalability: ExpandedRF elements® Horn CC Antennas enable extraordinary network scalability. Asymmetrical Horn CC Antennas are a new addition to the toolbox of a modern WISP. Unique beam performance, precise radiation patterns, and increased gain push system scalability even further. N-type ConnectorsAsymmetrical Horn CC Antennas feature N-female connectors, used with a wide range of radios, such as MimosaTM A5c, Cambium NetworksTM PMP 450, LigoWaveTM, and many others. Built Like a TankAsymmetrical Horn CC Antennas have solid aluminium body, built to last and resist any weather conditions. We use the most suitable materials: die cast, stamped, and extruded aluminium; stainless steel, high quality ABS plastic, and high density polyethylene. Innovative BracketAsymmetrical Horn CC Antennas feature an innovative mounting system. The mount is separated from the antenna, making the installation and adjustment quick and easy. Step 1: Bracket InstallationFirst install the bracket on the pole. The pole bracket is reversible: it can be mounted on the left or the right side of the antenna. Step 2: Antenna AdjustmentSimply slide the antenna in the bracket and adjust the elevation and the azimuth. Tighten the screws to finish the installation.Only one tool is needed for the entire installation.
Share your 4G data plan even when 4G tower is far wayIdeal for mobile home RV and boatThe new generation of Alfa Network 4G CampProThis is a special kit shipping in one retail box that features all of the equipment as shown on the product image designed to pick up a weak 4G signal and repeat it as your own personal hotspot. This is ideal for use during camping or in boats RVs and campers.The best affordable solution for turning 4G to a Wifi Internet HotspotUser Friendly – Mobile friendly web page supports QR code scanning for easy setup so you can enjoy Internet access in minutesVehicle Surge Protection – Special design to prevent accidental damage from vehicle spikes during ignitionIncluded in the box:– Alfa R36AH USB router– Indoor Antenna ARS -N05– Tube-4G USB receiver + 8m (26 ft) USB cable– 12V power supply for R36– Tube-4G needs no power supply draws power from the R36 via USB cable– waterproof tape and wire ties for mounting Tube to pole– R36 car/vehicle power supply adapterHow it works4G to Wifi Converter Kit – Use all three of these components above together to boost and convert a 4G signal to a Wi-Fi signal. Simply connect your computer to the R36AH via ethernet cable for a one-time configuration and setup. Put a SIM-card to the Tube-4G (make sure the SIM-card is on a 4G plan or recharged). Connect the AOA-M4G antenna to the Tube-4G receiver and then connect the Tube-4G to the USB port on the R36AH. Use the Wi-Fi scanning software built-into the R36AH that you will see during the setup wizard so you can scan for and connect to the new wireless networks in your area. Once the R36A has connected to a network you will be prompted to name and password protect your own new local Wi-Fi network offering any device within a few hundred feet the ability to use the same distant Wi-Fi signal.RangeThere is no specific range that can be computed as range can vary greatly based on environment and environmental factors like obstacles and interference. We recommend using this in an area where other devices can at least get a weak signal to the desired network such as one bar. If the environment is such that your devices cannot even see the desired network form the place of intended use the Camp Pro may not work well there.
Technical parametersMaterial UV steady plastic ABS PolyamideInstalation for mast ø 32 - 54 mmReady for 8 cables glands 4x Pg11 4x M20 Specification:GentleBOX is inclusive outdoor box for AP RouterBOARDs and other electronics which contains unique system of the grooves and holes for easy installation of the most common types of the routerboardsEasy installation without drilling you require 1 flat and 2 cross-shaped (PH1 and PH2) screwdrivers and the spanner "10" for complete installationThe package includes cable gland which is secured against spinning by specially molded retaining linesGentleBOX is prearranged for easy mounting of RB411 RB433 RB800 ALIX2 ALIX3 Compex Wispstation and Rocket M2 and M5 with GentleCLIP Package contents:Special bracket for the mast ø 32 - 54 mm (1pcs)Bayonet locks MS-1 for easy closure which never lose (4pcs)Bayonet locks recommend to lubricate vaseline best silicone (most oils dry out over time so it is not recommend for treatment)Cable gland Pg11 for cable ø 4 - 10 mm (1pcs)Cable gland M20 for cable ø 4 - 10 mm it is possible put through the connector RJ45 (1pcs)Screws and plastic distance piers for easy installation of the electronics (8/8pcs)Easy to use self-holding plastic piers
Antenna JRMC-680-10/11 is designed for microwave links at the frequency band 10 and 11 GHz. Precise performance with deep reflector dish complies with standard ETSI class 3.
QuPS4Outdoor power socket & plug - 4 PIN set (pin and input/output)Outdoor power socket & plug 4 PIN set (2 pin for power and 2 pin for digital INPUT/OUTPUT) for all cases where the User doesn’t want to use Passive PoE powering feature in all QuWireless antennas or need access to digital INPUT/OUTPUT from outside of the QuRouter or antenna.
TOL-4031This network cable tester is used for testing twosted pair wire connections with RJ11 RJ12 RJ45 connectors.Tests AT&T 258A EIA/TIA 568 Token Ring 10/100-Base-T each test is made one after another. Led indicators.
TOL-4063Network tester with tone generator for tracking the wires of multipair cablesThis is a standart network cable tester with aditional option – tone generator and receiver for multipair cable – for finding rigth wires in the bundle.Tone generator is connected to the cable with a connector or with aligator clip and generates the tone which can be easily found with tone receiver – even in the big bundles of cables . When you place the receiver near the connected cable it starts generating tone and it amplifies as closer to the cable you are.Suitable not only for network cable.
ALFA ALR series are professional 0-6GHz Lightning/Surge Protector with high quality nickel plated brass body and it normal protects ships with 90VDC breakdown voltage.
If you're in the market for a low profile dual band outdoor directional antenna consider this 8 dBi gain panel antenna manufactured by Alfa Network. This has an N-female connector and comes with an N-male barrel converter to fit the Alfa Tube-UAC2. This antenna can be fastened to nearly any surface and can be connected to many different Wi-Fi adapters.Alfa Tube shown for demo only!
Alfa AOA-2458-79AF is a low cost dual band omni-directionalWi-Fi antenna with N-female connector. The gain is 9 dBi for 5 GHz and 7 dBi for 2.4 GHz. It has weather proof casing. With its N-female connector this can be connected directly to a variety of outdoor WiFi products. Antenna does not come with a mounting bracket.
HG3-CC-S8080° Symmetrical Horn CC Antennas Gen2 Game Changing Sector AntennaSymmetrical Horn Carrier Class Gen2 is a scalar horn with the same size of main beam in horizontal and vertical planes equipped with N-female connectors. Since 2014 our horns address major weaknesses of mainstream sector antenna technologies and provide excellent noise rejection network scalability and throughput improvement.Approved by tens of thousands of installations all around the globe RF elements Symmetrical Horn Carrier Class Antennas are the new standard for fast and sustainable wireless. Unique Beam PerformanceSymmetrical Horn CC Antennas have a unique beam shape and characteristics. The beam section is circular: azimuth and elevation radiation angles are identical. No Side LobesSymmetrical Horn CC Antennas have no side lobes they literally focus energy into one main signal beam. Such behavior saves the most important resource in wireless - the spectrum. Thanks to these unique radiating properties the radio collects and propagates significantly less noise in comparison to current mainstream sector antennas. The problem of noise is directly connected to antenna side lobes - basically an unavoidable feature in most competitive products. Symmetrical Horn TP Antennas behave differently being basically "deaf" outside their main beam. Wideband PerformanceThe radiation pattern of Symmetrical Horn CC Gen2 is frequency independent and its gain is stable over the whole bandwidth of operation. These features make Symmetrical Horn CC Gen2 excellent sector antennas. Excellent Gain Across SpectrumSymmetrical Horn CC Gen2 Antenna covers ultra-wide bandwidth: 5180-6400 MHz! At the same time gain is stable over the whole band. Coverage Without NullMainstream sector antennas have a radiation pattern that is wide in azimuth but flat in elevation plane. If an AP is too high customers that are positioned too close will suffer from low AP signal. Breakthrough ScalabilitySymmetrical Horn CC Gen2 facilitates breakthrough scalability of wireless networks. Unique beam performance and great co-location characteristics allow for higher density sectors compared to traditional sector technology.Symmetrical Horn CC Gen2 features precise main beam widths spanning from 30 to 90 degrees: a range of models suitable for any situation. Ultimate Spectrum Efficiency For EveryoneSymmetrical Horn CC Gen2 antenna supports dense co-location of narrow sectors with excellent isolation. It unlocks the RF performance not possible before. This is an advantage horns have irrespective of radio platform used. N-type ConnectorsSymmetrical Horn Carrier Class Antennas feature N-type female connectors used with wide range of Radios. For example mimosaTM Cambium NetworksTM PMP450 LigoWaveTM and many others. Users of UBNTTM Rocket M5 Titanium MikroTikTM connectorized radios (NetBoxTM BaseBoxTM and NetMetalTM) can also utilize coaxial ports on Carrier Class Symmetrical Horn Antennas. Compact SizeSymmetrical Horn CC Gen2 Antenna is compact with only 20-25% footprint of traditional sector antennas. Compact size saves tower rental fees and makes it possible to install Symmetrical Horn CC Gen2 Antenna where regular sectors would not be allowed due to their shape and size. Robust and DurableSymmetrical Horn TP Antennas are solid aluminium bodies that are built to last and to resist any weather conditions. We use only the best materials: die cast stamped and extruded aluminium; high quality ABS plastic high density polyethylene; and stainless steel hardware.
Alfa ARS-N19M consists of two parts- Alfa ARS-N19 an RP-SMA 9 dBi gain dipole antenna and ARS-AS01 a magnetic docking base. It features an RP-SMA connector.This is a 9 dBi gain rubber duck antenna for use with wireless adapters that have an RP-SMA connector on them. Many PCI and some USB adapters have this type of connector. Alfa models AWUS036H AWUS036NH AWUS051NH and AWUS036NEH are all compatible with this antenna as is any other Wi-Fi adapter with an RP-SMA connector.With these antennas you may improve the power of the outgoing signal as well as enhance the receiver sensitivity for incoming signals. The improved signal gain and receiver sensitivity improve the reliability of any short-range communication since the signal can be received solidly and clearly - no more time-consuming retransmissions because of faulty received signals.These high-performance antennas are especially suited for the usage in wireless networks in companies and home applications. You will be able to provide remote and hard to reach locations with strong signals. Furthermore the antennas are ideal for large areas like storage facilities wireless hotspots and public spaces in general - everywhere you would like to enhance the range of your wireless network.This unit is brand new in OEM factory packaging (non-retail). You will receive the antenna just as shown exactly as pictured along with the magnet base.
Case OMP5 Flush-mounted OMP case is a perfect solution for a neat and safety telecom cables assembly as well as connectors and valves. Mix of aesthetic finish with practical application. Made of solid corrosion protected sheet of steel. Additional comfort of mounting given by easy to install doors with possibility of choice a side of the door (left- or right-handed). Doors equipped with patent lock (pair of keys included). Case with easy-removable perforated holes in both top and down side. Flush-mounted construction provides neat and aesthetic assembly.
Suitable for 3G/4G LTE Routers to Connect with External AntennasCF400 - Ultra low loss characteristics ensure the maximum performance of your antenna installation
Versatile CPE AntennasStarterDishTM UM are parabolic dish antennas with high directivity designed for CPE deployment scenarios. The StarterDishTM UM is a convenient and affordable antenna series providing wide range of footprint gain and connectivity options.Beam PerformanceStarterDishTM UM antennas are designed for the best possible performance having minimized side lobes enabling their deployment as CPE antennas in high interference environment.Balanced Gain for Both PolarizationsStarterDishTM UM antennas provide stable gain performance over the whole working frequency band and both polarizations. Stable gain results in dependable field performance when changing radio channels.Flexible Radio ConnectivityThe StarterDishTM UM antennas provide waveguide connection to Ubiquiti Networks waveguide connector and Mimosa waveguide connector straight out of the box. Separately sold StarterAdapterTM enables connectivity with any radio with coaxial interface. This adapter provides a pair of RP-SMA connectors and is not part of the StarterDishTM UM package.Slick Pole MountStarterDishTM antennas come with integrated pole mount. It is simple slick and light weight. The range of pole diameters it supports is from 20 to 55 mm (the upper part of pole diameter range is recommended for the best results).Light WeightStarterDishTM antennas are very light. Low weight provides multiple benefits when installing CPEs in environment with few mounting options. Low weight is also a big plus for field technicians and installation teams.
Versatile CPE AntennasStarterDishTM UM are parabolic dish antennas with high directivity designed for CPE deployment scenarios. The StarterDishTM UM is a convenient and affordable antenna series providing wide range of footprint gain and connectivity options.Beam PerformanceStarterDishTM UM antennas are designed for the best possible performance having minimized side lobes enabling their deployment as CPE antennas in high interference environment.Balanced Gain for Both PolarizationsStarterDishTM UM antennas provide stable gain performance over the whole working frequency band and both polarizations. Stable gain results in dependable field performance when changing radio channels.Flexible Radio ConnectivityThe StarterDishTM UM antennas provide waveguide connection to Ubiquiti Networks waveguide connector and Mimosa waveguide connector straight out of the box. Separately sold StarterAdapterTM enables connectivity with any radio with coaxial interface. This adapter provides a pair of RP-SMA connectors and is not part of the StarterDishTM UM package.Slick Pole MountStarterDishTM antennas come with integrated pole mount. It is simple slick and light weight. The range of pole diameters it supports is from 20 to 55 mm (the upper part of pole diameter range is recommended for the best results).Light WeightStarterDishTM antennas are very light. Low weight provides multiple benefits when installing CPEs in environment with few mounting options. Low weight is also a big plus for field technicians and installation teams.
Ethernet Surge Protector 8p in a rack housing operating in AT / AF standard.The device allows the addition of PoE power in the UTP and FTP twisted pair and at the same time provides effective protection of devices working in the Ethernet network against harmful electrostatic discharges and overvoltages. It provides device protection - with a connection rate up to 1 Gb / s inclusive - compatible with the PoE AT / AF standard allowing you to select the A / B power supply method / options . Protects each cable in a four-pair cable by discharging any load to the ground. It signals the selected power method with LEDs. It is an effective and cost-effective solution before the destruction or damage of protected devices. Ethernet Surge Protector collects inductive loads in the network and safely leads them to ground which effectively prevents damage caused by overvoltages. The aesthetic powder-coated aluminum housing in white is ideally suited to the design of devices from the Cloud Core Router series by MikroTik. Rack holders give the possibility of mounting a compartment's stain. Expandable with additional Ethernet modules Surge Protector SPG-8P. Protection of 24 ports at maximum expansion. Key features:Number of LAN ports - 8 x 10/100 / 1000MbpsNumber of PoE ports - 8 x 10/100 / 1000Mbps Supply voltage - 12-54VDCMaximum voltage PoE - 54Vpower supply via twisted pair - (4.5 +) ( 7.8- )Maximum current drawn from one port - 1ACurrent at which the port is closed -1.4Protected pairs - 1-2 3-6 4-5 7-8Slot type - RJ-45 shieldedDimensions - 485mm x 110mm x 45mm Length of the earthing cable - 30cmWeight - 0.725kg
