Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower, and in other situations. For using with RouterBOARDS that support 10-28V PoE powering, input needs to be at least 18V to accomodate any losses in cables.
- Simple Power up 8 Passive Gigabit PoE devices by one power source.- Power by DC jack or Terminal Block connector.- Application use for AP, IP camera, IP phones.Input Power: 12VDC - 48VDCOutput Power: Depends on Input PowerConnectors: Data In - RJ45, Power In - DC jack or Terminal Block Connector, Data+Power Out: RJ45DC Plug Connector: 2.1 x 5.5 mmData Rate: 10/100/1000MbpsRJ45 PIN Define: Data: all PIN, Power: (+)4,5 (-)7,8
Simple Power up 8 Passive 100Mbps PoE devices by one power source. Power by DC jack or Terminal Block connector. Switch On/Off button to save electricity while not use. Application use for AP, IP camera, IP phones.SpecificationsInput Power: 12VDC - 48VDCOutput Power: Depends on Input PowerConnectors: Data In - RJ45, Power In - DC jack or Terminal Block Connector, Data+Power Out: RJ45DC Plug Connector: 2.1 x 5.5 mmData Rate: 10/100MbpsRJ45 PIN Define: Data: all PIN, Power: (+)4,5 (-)7,8
The APOE03GR is the Single-Port Gigabit ( 10/100/1000 Base-T) redundant PoE Midspan/Injector with Reset function that provides DC power for PoE equipped Network Appliance device. It is compatible with devices that support the IEEE 802.3af/at standard PoE power feed using Mode B (Pins 4/5 and 7/8). The Reset button feature only work in certain AlfaModels. The APOE03GR features terminal block for Power redundancy, the power redundancy ensures that vital network capabilities are always available when needed, and also makes life easier for any IT Administrator who just doesn't want to have his sleep or his weekend interrupted by an untimely service call caused by a finicky power supply.** PD-side Reset circuit available upon request ** Function: Transform DC through RJ-45 cable PIN# 4,5,7,8, into remote devices such as Wireless AP, IP Phone, IP surveillance Camera, etc. With the terminal block connector can be connected to the UPS allowing redundancy in the power source. Key FeaturesInput:1.1 Input Voltage: 5Vdc to 57Vdc, Nominal = 48VdcGeneral Description:2.1 Operation Temperature: -0 ~ 402.2 Storage Temperature: -20 ~ 602.3 Operation Humidity: 10% ~ 80% Non-Condensing2.4 RJ-45 Connector PinOut2.5 DC Power Plug Diameter: 2.1Ø / 5.5Ø , Length: 12 ± 0.5mm2.6 DC Power Plug Polarity: Inside (+), Outside (-)PIN Define RJ-45 Input ( Data ) RJ-45 Output ( Data & Power )PINSymbolSymbol1TXRX A+TXRX A+2TXRX A-TXRX A-3TXRX B+TXRX B+4TXRX C+TXRX C+ DC+5TXRX C-TXRX C- DC+6TXRX B-TXRX B-7TXRX D+TXRX D+ DC-8TXRX D-TXRX D- DC-
Patch cable feature high quality and high performance transmission reliability and long life. It is equipped with protection and reduces crosstalk between pairs. This protection is done in a special thin design which ensures that the patch cable can be used in any patch panels or active device. All patch cables are thoroughly tested to meet international standards. Specifications: Category: Cat5e Supported protocols: 1000BaseT 1000BaseTX Length: 2 m Color: blue Wires: AWG24 stranded Insulation: Polyethylene Jacket: PVC Connector Type: RJ45 Storage Temperature: -20 ° C to 60 ° C Operating temperature: -20 ° C to 60 ° C Maximum Humidity: 90% Type of package: a package with EAN Certification: RoHS
unshieldednumber of ports: 24 x RJ-45dimensions: 19 inches 1Uequipped with a cable guidecompatible with category 5E EIA / TIA 568A / T568Bcolor coding in accordance with ISO / IEC 11801housing: made of steel sheet in black
for internal useequipped with a guide for easy fixing of cablesport designations using numberscompatible with LSA tools24x unshielded RJ45 jackstested measured with cat. 6 UTP cable on the 90m section with the Fluke Networks metermeets the requirements of category 6 UTP.
The FlexiMount XL are pole and surface mount accessories that accommodate both vertical and horizontal pole mounting applications, as well as basic flat wall mounting where minimizing the distance of the radio, relative to the wall, is important. Compared to the FlexiMount, the FlexiMount XL boasts a stronger, more heavy-duty design, a longer pole length and base, and an increased articulation angle of 180º.Suitable for vertical, horizontal, and angled poles, Mimosa’s FlexiMounts are able to be mounted inany orientation.Mimosa’s FlexiMounts come preassembled, right out out the box. They are ready for any backhaul,access point, or radio to be attached to them.Mounting OptionsPole mount with two pipe clamp, or surface mount with two screw hole points.Assembly Pre-assembled with a white powder coated finish. Mounting screws and pipe/hose clamps not included
Connection box is made for connection of two Cat 6 cables punching them down into IDC type connection module. Unscreened(UTP) Its ideal solution for connecting broken or damaged cables.
The nature of the rack shelf allows one to place devices not equipped in any handle assemblies in a suitable RACK cabinet. High-quality steel from which the shelf is made ensures its strength and stability of the structure.The bottom of the shelf has openings that can be used to provide additional security of devices by using cable ties additionally they do not block the air supply.A new series of STALFLEX rack shelves equipped with a special hole enabling the cable with a diameter of Ø45 to be led in. To the set are attached M6 screws with baskets and spacers.
RACK case 19" 3U 180 mm whiteCR19-3U-180-WThe vertical RACK housing allows assembling the devices in the RACK standard with a maximum depth of 350 mm while taking up little space.Installation and operation of devices in a new type of RACK housing is trouble-free and extremely easy. The housing door opens from the top down at an angle of 90 degrees. For this reason we get full opening and unlimited access to the devices.Special cylinders mounted in the housing slow down the opening of the housing door. Such a solution causes the fact that the risk of damage to the assembled equipment is minimised and the comfort of use is significantly increased.Broken cable glands were designed in the back of the housing. They allow breaking the appropriate ribs which will make it easier to lead in and lead out cables.The door is closed with a patent lock (included with a set of two keys).The holes in the back of the housing allow it to be hung with wall plugs.
