Wired security IP camera with up to 2880 × 1620 px resolution and 100°–110° viewing angle, Lens: 2.8 mm, Frame rate 25 FPS, JetSparrow, microSD, H.265, H.264, WDR, Motion detection, Object detection, Smart IR illumination up to 35 m,Visual verification of Ajax alarms, Microphone, Power supply 12V 1A, PoE Standard 802.3at
Teltonika Networks Remote Management System on kõik-ühes, kasutajasõbralik IoT-platvorm, mis pakub lihtsat võimalust hoida oma ühendatud lahenduse üleval. Tegemist on võimsa tarkvaraga, mis võimaldab kaugjuurdepääsu kõigile ühendatud Teltonika Networks'i ja kolmandate osapoolte seadmetele ning nende haldamist.
netPower Lite 8P Low-cost. Tough. And always ON! Compact PoE switch with built-in UPS and smart battery charger – because your CCTV cameras and access points deserve true off-the-grid resilience.
OmniTik 5 PoE ac features five Gigabit Ethernet ports and support for 802.11ac. It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 1,300mW 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE) and comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit. It also supports passive or standard 802.3at/af PoE input/output (12v-57v). Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! It can power 48V devices (like IP camera), if 48V input is used. OmniTik 5 PoE ac (International) supports 5150MHz-5875MHz range.
The wAP 60G and wAP 60G AP are weatherproof integrated 60GHz wireless units, that can be used indoors or outdoors in different scenarios - Base Station (only wAP 60G AP), Point-to-Point and CPE (wAP 60G AP and wAP 60G). The box includes a wall mounting kit, straps for pole mounting, power supply, PoE injector and also table stand for using the device indoors. Penetrates some windows depending on material. wAP 60G AP and wAP 60G allows to create high-speed Point-to-Multipoint setup setup in 60 GHz frequency that is not affected by the crowded WiFi spectrum. In such scenario, wAP 60G AP (comes with RouterOS L4 license for AP connections and 60 degrees antenna) can be used as Base Station / Access Point. wAP 60G AP supports up to eight simultaneous clients (wAP 60G with L3 license) on distances of 100m+. RBwAPG-60ad-A - Included Parts
LTU-PRO Incorporating innovative industrial design with advanced technology, the LTU Pro is a Point-to-MultiPoint (PtMP) 5 GHz high-performance subscriber station. Based on Ubiquiti’s proprietary LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi-Fi technology. It features an integrated high-gain dish for long range and high performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. Features: PtMP CPE 1024 QAM 10/20/30/40/50 MHz channel bandwidth Central configuration management from AP side Frequency split Automatic power adjustments Router mode support Functions in a PtMP environment with the LTU-Rocket as the basestation. Featuring an integrated 24 dBi dish antenna, the LTU Pro is a 5 GHz subscriber station that functions as a CPE (Customer Premises Equipment) in a Point‑to‑MultiPoint (PtMP) environment with the LTU Rocket® as the basestation.Proprietary LTU Technology Based on Ubiquiti’s LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi‑Fi technology. Its custom LTU silicon and radio architecture provide up to 600+ Mbps (1) of real TCP/IP throughput and modulation rates of up to 4096QAM (2). 1 1+ Gbps with future firmware upgrade.2 Available with future firmware upgrade. CPE Modes The LTU Pro supports both bridged and built-in hardware NAT router modes to suit your specific deployment. Frequency Split The LTU Pro can use different frequencies for TX and RX to avoid interference. Robust Pole Mount Design The LTU Pro is designed for quick yet reliable mounting on a pole. It features a built-in mechanical tilt; the mounting bracket allows convenient adjustments to the elevation with a range of ± 15°.
RUTM11 on Teltonika tööstuslik LTE-ruuter, mis on mõeldud rakenduste jaoks, mis nõuavad suurt andmeedastust ja töökindlat võrguühendust, mis ei talu suuri viivitusi ja katkestusi. RUTM11 on varustatud nelja Gigabit RJ45 pordiga, kahesagedusliku Wi-Fi ja kahe SIM-kaardi võimekusega, mis võimaldab mitut varusstsenaariumi. Sellel ruuteril on LTE Cat 6, mis võimaldab saavutada kuni 300 Mbit/s mobiilside kiirust, mida saab suurendada operaatorite koondamise abil. ÜHENDUS Dual SIM, 4G LTE (Cat 6) kiirusega kuni 300Mbps INTERFACES 4 x Gigabit RJ45 porti, USB ja kuni 128 tag/port-põhist VLANi. GNSS Asukohateenused ja ajasünkroniseerimine andmete täpseks lugemiseks WI-FI 5 Kahe sagedusalaga Wi-Fi koos võrgusilma ja kiire rändluse funktsioonidega STANDARDPAKETT*Ruuter RUTM1118 W TOITEALLIKAS2x mobiilsed antennid (pöörlevad, SMA isendiga)2x Wi-Fi antennid (pööratavad, RP-SMA isased)1x GNSS antenn (kleepuv, SMA isane, 3 m pikkune kaabel)Ethernet-kaabel (1,5 m)SIM-adapteri komplektQSG (kiirkäsiraamat)Pakendikarp
Ubiquiti UXG-Lite on kompaktne ruuter, mis pakub olulisi võrgu- ja turvafunktsioone väikestele ja keskmise suurusega ettevõtetele. Seade on loodud lihtsuse, tõhususe ja suure jõudluse jaoks, pakkudes täiustatud võrguhaldust ilma suuremate ettevõttelahenduste keerukuseta.Peamised spetsifikatsioonid:Mehaaniline:Mõõtmed: 141.8 x 127.6 x 30 mm (5.6 x 5 x 1.2 tolli)Kaal: 320 g (0.7 lb)Korpuse materjal: PolükarbonaatVastupidavus: IK04Riistvara:Protsessor: Kahetuumaline ARM Cortex-A53 1.2 GHzMälu: 1 GB DDR3Haldusliides: Ethernet, BluetoothLAN-pordid: (2) 1 GbE RJ45WAN-pordid: (1) 1 GbE RJ45IDS/IPS läbilaskevõime: 1 Gbps (mõõdetud iPerf3-ga DHCP WAN-il; jõudlus võib PPPoE korral erineda sõltuvalt ISP rakendusest)Toide ja LED-id:Toiteviis: USB tüüp-C (5V/2A)Maksimaalne energiatarve: 7WLED-id: Ethernet (Valge - link/aktiivsus)Tehase lähtestamise nuppKeskkonnatingimused:Töökeskkonna temperatuur: -10 kuni 40°C (14 kuni 104°F)Töökeskkonna niiskus: 5% kuni 95%, mitte kondenseeruvSertifikaadid: CE, FCC, ICJõudlus: Toetab põhilist QoS-i, WiFi haldust koos UniFi AP-dega ja internetikvaliteedi aruandlust.Turvalisus: Pakub IPS/IDS-ohtude tuvastamist, sisufiltreerimist, põhilisi tulemüüri funktsioone ja võrgu segmenteerimist.Võrgundus: Toetab VPN-i, kohandatavat DHCP-serverit, IPv6 tuge ja mitut WAN-i võimalust.
Managing outdoor wireless network has never been easier: mANTBox ax 15s can provide unparalleled wireless point-to-multipoint connectivity for a vast variety of devices over a distance of 20 kilometers! A potent combination of modern dual-core ARM CPUs, our latest 802.11ax Wi-Fi 6 dual-band radios and powerful built-in sector antennas will take your signal stability, speed, and responsiveness to the next level! There’s a Gigabit Ethernet port with PoE-in and an SFP port with 2.5 Gigabit support for extra fast fiber uplinks. Upgrading your setup to Wi-Fi 6 offers multiple benefits: Speed: we’ve seen up to 40% higher speed in the 5 GHz spectrum and up to 90% higher speed in the 2.4 GHz spectrum. Security: WPA3 encryption and management frame protection prevent all sorts of attacks, like bruteforcing and WPA2 handshakecapture deauthentication attacks Reliability: seamless fast transition (roaming) enables smooth, non-stop signal when you have to switch between access points. Also, Wi-Fi 6 ensures a fair traffic distribution if the connection is shared by a large number of users. Energy efficiency: features like Target Wake Time reduce power consumption in the long run. Better for your wallet and the planet! mANTBox package includes everything you need: a Gigabit PoE injector, a power supply, a hose clamp and a fastening set, and the MikroTik quickMOUNT pro. This advanced wall mount adapter allows turning antenna within 140° both horizontally and vertically. With the quickMOUNT pro it is possible to perfectly set antenna alignment using an integrated graduated scale.
Chateau PRO ax A Wi-Fi 6 home access point for the advanced users – it comes with an exceptionally powerful wireless system and a matching CPU. Designed with professional users in mind, the Chateau PRO ax Wi-Fi 6 home access point is engineered to squeeze out maximum performance, handling more traffic than ever before. With its unstoppable quad-core ARM CPU running at 2.2 GHz and our latest cutting-edge wireless chip, Chateau PRO ax leverages 4 spatial streams to achieve double the data rate of the usual dual-chain devices, ensuring that your network is always fast, reliable, and ready to support even the most demanding tasks. Remember – you will need a device that supports 4 spatial streams on the other side of the connection to fully utilize the Chateau PRO ax. With 5x Gigabit Ethernet ports and a USB 3.0 port, you can transform this Chateau into a home media server by plugging in an additional SSD storage. Or you could use the USB to add an LTE modem for backup! Advanced container setups, bonding, or high-speed 4x4 MIMO wireless setups – that’s where the Chateau PRO ax can really shine! Also, its increased number of radio transceivers provides significantly improved wireless coverage and beamforming performance.
Effortlessly split a single high-power PoE port into multiple standard PoE connections with the compact and durable GPeRx4. Expand, extend, and power your network with ease!
The Zyxel GS-105B is designed to meet the networking needs of small to medium-sized enterprises with its robust performance and reliability. This 5-port Gigabit Ethernet switch delivers a switching capacity of 10 Gbps and a forwarding rate of 7.4 Mpps, ensuring efficient data transfer across the network. Its compact form factor is suitable for desktop use or wall mounting, making it a flexible choice for various environments. Operating within a temperature range of 0°C to 40°C and featuring a high packet buffer size of 128 KB, this switch is built to handle demanding network conditions. The device complies with multiple standards, including IEEE 802.3 and FCC, which ensures compatibility and performance in different network settings. With additional features such as Quality of Service (QoS) and auto-uplink capability, the GS-105B is an effective solution for enhancing network performance.
The new AC standard is here, with up to 866Mbit over the air datarate, 256-QAMmodulation, and 80MHz channels. 802.11ac opens up new possibilities and speedsnever possible before.The SXT ac is a new member in our 802.11ac product lineup, currently two models areavailable — with regular 28 degree antenna, and the SA model with a 90 wide beamwidthsector antenna. Also supports 802.11a/n mode and is compatible with all legacyRouterBOARD devices, including Nstream and Nv2 protocols. Both devices come withGigabit Ethernet.• 1300mW RF output• extended temperature range -30C to +80C• up to 540Mbps throughput• low latency Point to Point
RBFTC11 is Fiber to Copper converter. Unlike many other media converters available on market, RBFTC11 has outdoor waterproof case with lock screw. Unit has 12-57V PoE with 802.3af/at support. Comes with PoE injector and power supply.
• Allows adjustment both vertically and horizontally • Supports all LHG series, products, including LHG XL. • Made from metal. • Package also includes a U-bolt and a mounting kit.
USP-RPSThe UniFi® SmartPower Redundant Power System, model USP-RPS, is a proprietary redundant power system designed to protect up to six UniFi SmartPower supported devices from sudden power supply module failure. The USP-RPS continually monitors all attached devices. In the event of an internal AC/DC power supply failure, failover is automatic so your network continues to operate with no interruption in service. With a 950W DC power budget, the USP-RPS can protect a variety of high-power devices, including UniFi PoE switches. An integrated 1.3" color touchscreen LCM displays system information for convenient monitoring.
TSW030 on kuluefektiivne haldamata Ethernet-kommutaator, millel on kaheksa 10/100 RJ45 porti ja integreeritud DIN-riba paigaldus. See kompaktne ja vastupidav 8-portiline kommutaator sisaldab 2-poolset toitesisendit ja madalat energiatarbimist, mis on kuni 0,5 W tühikäigul ja maksimaalselt kuni 1,5 W. Tänu sellele sobib see plug-and-play lüliti ideaalselt tööstuslikesse rakendustesse, kus on vaja ühendada kuni kaheksa seadet. 2-POOLNE TOITESISENDLihtne ja tööstusrakendustesse sobivMADAL ENERGIATARVETühikäigul kuni 0,5 W, maksimaalselt kuni 1,5 WINTEGREERITUD DIN-RÖÖPMELLihtne paigaldus plug-and-play kasutuselevõtuks8 X RJ45 PORTSKaheksa 10/100 Mbit/s Ethernet-porti
Welcome to the forefront of networking: the future-proof CRS520-4XS-16XQ-RM with extra processing power, 4 GB of DDR4 RAM, and the best price per 100 Gigabit port we’ve seen so far. With 16x 100 Gigabit QSFP28 ports, 4x 25 Gigabit SFP28 ports, and an extra pair of 10 Gigabit Ethernet ports, this switch can bring a lot of value to complicated enterprise networks, data centers, multimedia studios, and other setups where you would typically use several devices. Now – a single CRS520 can do the trick! Avid CCR users might recognize the powerful quad-core ARM CPU running at 2 GHz, and ask – why would a switch need all that power? Two reasons: 1) CRS520 is more than a switch. You can run OSPF/BGP, out-of-band/management VPNs, ACLs, Jumbo frames and even L3HW Offloaded routing; 2) Future-proofing: as our friends at Marvell keep expanding the capabilities of their spectacular switch-chips, our in-house software team is busy exploring ways to add even more Hardware Offloaded features. You can expect software updates that will take the CRS520 to the next level! And all that without any paywalls or subscriptions. Two hot-swap power supplies and four hot-swap fans for cooling are included. This switch can also be powered by the PW48V-12V150W Hot Swap -48V DC telecom power supply, available separately.
The Ubiquiti UniFi patch cable is a high-quality networking solution designed to meet the demands of modern indoor environments. With its CAT 6 specification, it supports high-speed data transmission, making it perfect for connecting a wide range of devices. Each cable features male RJ-45 connectors on both ends, ensuring a secure and straightforward connection. Designed specifically for indoor use, this patch cable offers optimal performance and reliability. Furthermore, it complies with TIA/EIA-568-B.2 and VW-1 (UL1581) standards, highlighting its safety and durability. Whether for home or office use, the Ubiquiti UniFi patch cable is an excellent choice for establishing a reliable network.
RUTM52 on tulevikukindel 5G-ruuter, mis on mõeldud kriitiliste rakenduste jaoks, millel on kaks 5G-modemit, multi-WAN-funktsioonid ja 4G LTE Cat 20 varuvariant. Tänu kahele SIM-pesale, eSIM-toele ning ühilduvusele SA ja NSA 5G arhitektuuridega tagab see kiire ja katkematu ühenduvuse nii täna kui ka aastate pärast. Koormuse tasakaalustamine, Wi-Fi 5 ja viis Gigabit Ethernet-porti suurendavad jõudlust, samas kui RutOS koos tööstusprotokollide ja erinevate VPN-idega muudab selle mitmekülgselt kasutatavaks keerukate seadistuste jaoks. RUTM52 on ühilduv RMS-iga ning sobib ideaalselt turvaliseks ja tõhusaks kaugjuhtimiseks.Tööstuslik LTE Cat 4 värav sisaldab kõiki olulisi funktsioone mis tahes tööstuses: kiire ja usaldusväärne internetiühendus, Ethernet- ja jadakommunikatsiooni kombinatsioon, turvaline toitepistik, I/O-pordid ja ajasünkroonimisteenused.TRB245 saab kasutada kaasaegsete ja vanade tööstuslike seadmete integreerimiseks ühte lahendusse RS232- või RS485-liideste kaudu.Lai valik tarkvarafunktsioone, nagu SMS-juhtimine, tulemüür, OpenVPN, IPSec, RMS, tagab andmete turvalise kättesaadavuse.Kahe SIM-kaardi funktsionaalsus koos automaatse katkestuse ja WAN-i varukoopiaga tagavad stabiilse ühenduvuse isegi siis, kui peamine ühendus on kadunud.DUAL 5G MODEMKuni kahekordne mobiilsidekiirus ja alati sisselülitatud ühendusDUAL SIM & eSIM™Automaatse ümberlülitusega, varuvõrgu WAN ja muude lülitusstsenaariumidegaSA & NSAToetab mõlemat arhitektuuri, et kasutada ära 5G infrastruktuuriTULEVIKUKINDLUSTagasi ühildub 4G-ga (LTE Cat 20)
The DAP140 is a Teltonika industrial wireless access point with passive PoE-in, designed to enhance Wi-Fi coverage and performance in industrial environments. Featuring Wi-Fi 4 with Wi-Fi mesh and Fast Roaming, as well as dual RJ45 ports and support of up to 50 simultaneous connections, this wireless access point is integral in maintaining reliable connectivity. An integrated DIN rail bracket, 3-pin power connector, and industrial-grade aluminium housing make the DAP140 the ideal access point for industrial applications.
Included Accessories 2x IEC cordsRackmount rear support ears (2/2)Rackmount ears (CRS)K-82 fastening set | Operating temperature range -10°C to 50°C | Product Net Weight 2.8 kg
RouterBoard 1100AHx4The RouterBoard 1100AHx4 is a 13-port Gigabit router with its own rackmount case for easy integration into an existing network.1U Rackmount CaseUnit comes with 1U rackmount case, The RB1100AHx4 feature two IEC failover power connectors, support 802.3at PoE input and also have a DC telecom power connector for -48 V DC powering.Fast Internet SpeedNew RB1100AHx4 has Annapurna Alpine AL21400 CPU with four Cortex A15 cores clocked at 1.4GHz each, for a maximum throughput of up to 7.5Gbps.The device supports IPsec hardware acceleration and is faster at it than any previous RouterBOARD device (up to 2.2Gbps with AES128).
Remove the bottleneck from your network setup – it is time to upgrade that 1 Gigabit switch to something truly powerful and enjoy real speed. Introducing CRS312-4C+8XG-RM – our first product with 10G RJ45 Ethernet ports. Moreover, it also has 4 x 10G combo ports: use them for 10G RJ45 Ethernet or 10G SFP+, when you need an additional fiber connection. Combo ports can be used alongside the 8 regular 10G RJ45 Ethernet ports at all times. These ports can also be software selected, so you can use RouterOS scripting, to decide which combo ports will be active.This device is a practical solution for those who work with huge data files and need fast, capable connection 24/7: multimedia production, scientific research, game development, big data analysis and so on. CRS312-4C+8XG-RM has a dual power supply for redundancy – no unexpected downtime when the deadlines are looming. It has a full size USB, a console port for configuration and a 1U rackmount case – fits all the standard racks.You can choose between our legendary feature-packed RouterOS for booting or a simpler, but still powerful SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS.This switch has a great total non-blocking throughput of 120 Gbps, switching capacity of 240 Gbps and forwarding rate of 178 Mpps. CRS312-4C+8XG-RM – built for professionals, great for everyone!
UFP-VIEWPORTThe UniFi Protect ViewPort allows you to view your UniFi Protect camera feeds on an HDMI display. It uses Power over Ethernet and connects to the local network hosting your cameras and connects via HDMI to a display. The UniFi Protect ViewPort offers 4K video output at 30 frames per second. Protect systems can be viewed in custom high-density camera matrix configurations.
The GPEN21 is a smart power injector that serves as an advanced software controlled repeater. Not only can it power your uplink devices via PoE it can also provide a range of useful software features: Interface management and monitoring GPEN link fault detection VLAN support SNMP reporting Basic traffic shaping GPEN21 has an Ethernet and SFP port for fiber connectivity. Customers can choose to use GPEN21 to power optical module for uplink to provider or to provide PoE to power Ethernet uplink to provider (that uses Mikrotik GPeR and/or netPower products) The GPEN unit can be securely attached to a wall or the communications cabinet. The Ethernet cable can be routed either directly through its bottom cable opening or into the wall as preferred.
Parameters Parameter Value Mounting type Flat surface mount Material ABS + PC plastic Weight 2x5 g Screws included Philips Pan Head screw #6-32×3/16 2pcs Dimensions 25 mm x 48 mm x 7.5 mm RoHS Compliant ✔ * - Teltonika devices are shown for demonstration purposes only and sold separately!
5G Ülikõrge mobiilside kiirus kuni 1 Gbps SA JA NSA Toetab mõlemat arhitektuuri, et kasutada ära 5G infrastruktuuri ÜLIVÄIKE LATENTSUS Ühekohaline latentsus missioonikriitiliste rakenduste jaoks GIGABITINE ETHERNET Usaldusväärne side suure andmeedastuse jaoks KOMPAKTSUS Üks väikseimaid turul saadaolevaid 5G-väravaid TULEVIKUKINDLUS Tagasi ühildub 4G (LTE CAT 20) ja 3G võrgutehnoloogiatega TRB500-värav on kompaktse suurusega ja energiatõhus tööstuslik värav, millel on Gigabit Ethernet-liides ja kaks konfigureeritavat I/O-d, mis võimaldab kõrgetasemelist kohandamist ja paljude stsenaariumide rakendamist. See seade võimaldab 5G-võrgu kiirust üliväikese latentsusega töökriitiliste infrastruktuuride jaoks ja suurt andmeside läbilaskevõimet, mille tagavad 4 välisantenni, mis võimaldavad 4x4 MIMO kasutamist. TRB500 on varustatud operatsioonisüsteemiga RutOS, mis pakub täiustatud turvafunktsioone ja ühilduvust meie kaugjuhtimissüsteemiga (RMS), et optimeerida suurte seadmeparkide kaugjuhtimise ja jälgimise võimalusi.
