Ubiquiti's UniFi Fibre Patch Cable is a Multi-Mode, LC-LC, OM3 fibre patch cable designed to be used with SFP modules such as Ubiquiti's UFiber modules. Specifications Type: OM3 (Duplex)Mode: Multi-0ModeColour: TurquoiseConnectors: LC-LCCore diameter: 50 micronsCladding diameter: 125 micronsOutside Diameter: 2 mm (each fiber)Length: 5m
Build and expand your network with the Ubiquiti® UniFi® Switch XG 6POE, model US-XG-6POE. It is a fully managed, 6-port, 10G switch with 802.3bt PoE++. For deployment versatility, four 10G RJ45 ports offer 802.3bt PoE++ for powering devices, and two SFP+ ports are designed for high‑capacity fiber uplinks.Switching PerformanceThe UniFi Switch XG 6POE offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. The switch features a total non-blocking throughput of up to 60 GbpsModel: US-XG-6POE• (4) 100/1000 Mbps and 2.5/5/10G RJ45 Ports• (2) 1/10 SFP+ Ports• (4) 802.bt PoE++ Ports• Non‑Blocking Throughput: 60 Gbps• Switching Capacity: 120 Gbps• Forwarding Rate: 89.3 Mpps
The UFiber splitter carries data from a UFiber OLT’s long-haul cable and shares it with multiple UFiber ONUs. Available with 4, 8, 16, or 32 outputs. PLC Splitters UF-SPLITTER-4 UF-SPLITTER-8 UF-SPLITTER-16 UF-SPLITTER-32 Input (1) SC/APC (1) SC/APC (1) SC/APC (1) SC/APC Outputs (4) SC/APC (8) SC/APC (16) SC/APC (32) SC/APC Insertion Loss with Connectors 7.4 dB 10.5 dB 13.7 dB 17.0 dB Uniformity Loss 0.6 dB 0.8 dB 1.2 dB 1.5 dB Polarization Dependent Loss 0.3 dB 0.3 dB 0.3 dB 0.3 dB Wavelength Bandwidth 1260-1650 nm 1260-1650 nm 1260-1650 nm 1260-1650 nm Return Loss (All Ports) 50 dB 50 dB 50 dB 50 dB Directivity 55 dB 55 dB 55 dB 55 dB Fiber Type G657A1 G657A1 G657A1 G657A1 Operating Temperature -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) Total Length 4.06m (13.32') 4.06 m (13.32') 4.06 m (13.32') 4.08 m (13.39') Weight 58 g (2.0 oz) 62 g (2.2 oz) 110 g (3.9 oz) 160 g (5.6 oz)
hEX PoE lite is a small five port ethernet router in a plastic case it has a USB 2.0 port and PoE output. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! Max current is 1A per port Ethernet ports are shielded. It is affordable small and easy to use. With it’s compact design and clean looks it will fit perfectly into any SOHO environment.
Parameters Rated Value Single output power 20 W Input voltage range 100-240 VAC 50/60 Hz DC output voltage 12 V DC output current 0~1.67 A Output ripple and noise 120 mVp-p Line regulation ±1 % Load regulation ±1 % Efficiency 80 % Adjustable range for DC voltage ±1 % Test standard EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013EN55022:2010EN61000-3-2:2014EN61000-3-3:2013EN55024:2010/A1:2015 Inrush current Cold start current 20 A/ 115 VAC; 40 A/ 230 VAC Overload protection 105 % ~ 160 % cut off the output automatic recovery Over voltage protection 120 % ~ 140 % shut down O/P voltage re-power on to recover Setup rise hold up time 500 ms; 30 ms/ 230 VAC at full load; 1000 ms; 30 ms/ 115 VAC at full load Withstand voltage I/P-O/P: 1.5 kV; I/P-FG: 1.5 kV; O/P-FG: 0.5 kV 1 minute Isolation resistance I/P-O/P I/P-FG O/P-FG: 500 VDC/ 1000 MΩ Working temperature -10 °C ~ +50 °C Mounting options 35 mm DIN Rail Dimensions 22.5 x 90 x 100 mm Weight 190 g
Hot-swap power supply for the CCR2004 — so you can replace the power supply without having to turn off or even restart the router. Zero downtime!CCR2004-16G-2S+ comes with two hot-swap dual redundant power supplies. If one of them goes out of order at some point the other one will take over. Then you can use this kit to replace the old power supply — and you don’t even have to restart the router!
MT48-480095-11DG is 48 V 0.95 A power supply. It's part of Mikrotik GPEN concept that provides all the benefits of GPON but utilizes well-proven simple and inexpensive Ethernet solutions.MT48-480095-11DG allows using long Ethernet cable runs and multiple GPER units - please refer to the table in the last page of GPEN concept brochure.
RMK-2/10 allows installing two of the smaller MikroTik form-factor devices within traditional 19-inch racks, such as our neat and handy SR-10U! Alternatively, you can permanently remove a part of the bracket to install a single 200 mm device into a classic 10-inch rack.
The Ubiquiti UniFi patch cable is a high-quality networking solution designed to meet the demands of modern indoor environments. With its CAT 6 specification, it supports high-speed data transmission, making it perfect for connecting a wide range of devices. Each cable features male RJ-45 connectors on both ends, ensuring a secure and straightforward connection. Designed specifically for indoor use, this patch cable offers optimal performance and reliability. Furthermore, it complies with TIA/EIA-568-B.2 and VW-1 (UL1581) standards, highlighting its safety and durability. Whether for home or office use, the Ubiquiti UniFi patch cable is an excellent choice for establishing a reliable network.
Improved Noise Immunity The NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Innovative Mechanical Design • Built-in mechanical tilt The mounting bracket conveniently offers 20° of uptilt and up to 20° of downtilt. • Quick assembly The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the NanoBeam on the pole. • Easy removal The antenna feed can be detached with the push of a button. Corrosion Resistance • Fasteners GEOMET®-coated for improved corrosion resistance when compared with zinc-plated fasteners.
Recently we’ve seen a demand for additional pole-mounting options for our popular SXTsq devices. You ask – we deliver! The new QM-X adapter enables vertical and horizontal adjustment on the pole.It is lightweight, easy to use, extremely durable and without any small parts that might break. Pick it up today for the price of a milkshake and enjoy simple positioning of your SXTsq devices like never before!Compatible devices: SXTsq series, DISC 5
The Ubiquiti UniFi Access Rescue KeySwitch is a manual emergency KeySwitch designed to provide reliable operation in extreme environments. With an operating temperature range from -30°C to 65°C, this device ensures functionality even in harsh conditions. Constructed from durable polycarbonate, it withstands humidity levels of 5 to 95% (non-condensing), making it suitable for various applications.This KeySwitch features a terminal block interface that accommodates 18-24 AWG wiring, allowing for easy connectivity and implementation in your network setup. This product is compliant with IC and FCC standards, ensuring it meets necessary regulations for electrical devices. With a required voltage of DC 28 V, it integrates seamlessly into your existing systems, providing an essential component for emergency access control.
Introducing Universal Arm Bracket (UB-AM) by Ubiquiti. Designed for wall or poles, UB-AM provides a versatile and robust solution for mounting all of your devices. Now Shipping.
Build your outdoor fiber network using our FiberCable. Lightweight and flexible, FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as EdgePoint.Outdoor-Rated Jacket with RipcordIntegrated Weatherproof TapeKevlar Yarn for Added Tensile StrengthOuter Diameter of Cable: 6.0 ± 0.2 mmSix-Strand Single-Mode (G.657.A2)Outer Diameter of Fiber Strand: 0.25 mm NominalInsertion Loss1310 nm: ≤0.5 dB/km1550 nm: ≤0.5 dB/km
The quickMOUNT pro LHG is a advanced wall or pole mount adapter for Mikrotik LHG antennas.The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT prois possible to perfectly set antenna alignment using integrated graduated scale.
UFP-VIEWPORTThe UniFi Protect ViewPort allows you to view your UniFi Protect camera feeds on an HDMI display. It uses Power over Ethernet and connects to the local network hosting your cameras and connects via HDMI to a display. The UniFi Protect ViewPort offers 4K video output at 30 frames per second. Protect systems can be viewed in custom high-density camera matrix configurations.
TSF010 on haldamata Ethernet-kommutaator, millel on lame konstruktsioon ja integreeritud DIN-riba kinnitus, et seda saaks kasutada tööstuslikes kappides plug-and-play põhimõttel. See Ethernet-lüliti on kompaktne ja kerge, mõõtmetega 113 x 28 x 50 mm ja kaaluga vaid 142 g. Selle 3-pooluseline toitesisend ja 7-57 VDC pingevahemik teevad sellest paindliku juhtimiseta lüliti, mis on kohandatud tööstuslikuks kasutamiseks. TSF010 on varustatud viie 10/100 Mbit/s RJ45-portiga, mis tagavad usaldusväärse ühenduvuse.3-POOLNE TOITESISENDPaindlik ja tööstuslikuks kasutamiseks kohandatudLÕIKEDA JA KOMPAKTNELame ja kompaktne disain, mis kaalub vaid 142 gINTEGREERITUD DIN-KANDURIGA KLAMBERLihtne paigaldus plug-and-play kasutuselevõtuks7-57 VDCSobiv pingevahemik tööstuslike rakenduste jaoks
RUT206 on kompaktne tööstuslik ruuter, mis toetab RS232 ja RS485 jadaliideseid ning aktiivseid ja passiivseid PoE-sisendeid. Tänu vastupidavale konstruktsioonile, 2-poolusele toitesisendile ja microSD-pesa kaudu laiendatavale andmesalvestusele on see ideaalne valik mitmesuguste asjade interneti- ja M2M-rakenduste jaoks. See 4G Cat 4 ruuter on varustatud avatud lähtekoodiga RutOS-tarkvaraga ja toetab selliseid peamisi tööstuslikke protokolle nagu Modbus, DNP3 ja DLMS.ÜHENDUS4G Cat 4, 3G, 2GJADALIIDESEDRS232 ja RS485 jadakommunikatsiooniks2-POOLNE TOITESISENDLihtne ja sobib tööstuslike rakenduste jaoksPoEAktiivsed ja passiivsed PoE sisendid
The Lite AP GPS features an integrated high-performance 90 degree sector antenna and GPS Sync for scale-able, cost-effective airMAX AC networks.Introducing the Ubiquiti LiteAP AC airMAX (LAP-GPS), the latest high-performance access point from Ubiquiti Networks. Featuring an ultra-lightweight form factor, the LAP-GPS was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. Each of these access points operates in the worldwide, licence-free 5 GHz frequency range with high-performance speeds. The LAP-GPS combines proprietary hardware and software technologies to deliver its breakthrough combination of throughput and range, with cost-effective value.Key FeaturesPart of the Ubiquiti LiteAP AC rangeIncludes Pole Mounting KitRevolutionary Operating SystemAccess Point PtMP airMAX Mixed ModeairMAX AC Protocol SupportLong-Range Point-to-Point (PtP) Link ModeSelectable Channel WidthPtP: 10/20/30/40/50/60/80 MHzPtMP: 10/20/30/40 MHzAutomatic Channel SelectionTransmit Power Control: Automatic/ManualAutomatic Distance Selection (ACK Timing)Strongest WPA2 SecurityairMagic Channel Selection ToolDynamic Configuration ChangesInstant Input ValidationHardware OverviewThe LAP-GPS delivers up to 450+ Mbps real TCP/IP throughput and features an efficient form factor.GPS Sync SupportThe LAP-GPS supports GPS Sync for faster, more scalable, carrier-class networks. Precise GPS frame synchronisation enables co-located LAP-GPS devices to transmit and receive data without interfering with each other, allowing for better frequency reuse and increased network stability. In a cost-effective WISP deployment, the LAP-GPS is used as an Access Point in an airMAX AC Point-to-MultiPoint network.
Introducing the new and improved Imilab Security Camera EC4. It is the successor of the popular EC2 model. The new model has 4 Mpx 2.5K resolution recording also supports color night mode and also allows connecting a photovoltaic panel.Say goodbye to constant charging and hello to battery-saving technology with the Imilab Security Camera EC4. This innovative home-security camera can fully charge through the built-in 5200mAh rechargeable battery or through the optional solar panel (purchased separately). A single charge could last months with the battery—or you may never need to recharge at all with the solar panel!2.5K Video and Many ImprovementsThe new Imilab Security Camera EC4 camera includes several improvements that should eliminate the problems of older cameras such as delayed recording and poor video at night. The camera is 4 Mpx has an F1.6 aperture and records at 2.5K resolution. The Imilab Security Camera EC4 features a more modern design slightly larger battery capacity improved microphone and speaker and LED lighting.Say goodbye to grainy blurry black and white video footage and hello to color with the EC4. The bright built-in spotlight turns on any time a person is detected at night displaying full-color footage.Flexible and Secure StorageThe IMILAB cloud storage is based in the AWS cloud service which is extremely reliable and has coverage in 190 countries. All IMILAB video data is securely encrypted with randomly generated encryption keys and each encryption is applied to the data transition of the cloud storage. Only legitimate users can access the data via digital certificate accordingly. With the automatic data backup on IMILAB cloud storage users can access video recordings any time anywhere.IP66 WeatherproofThe Imilab Security Camera EC4 is waterproof and will function perfectly rain or shine. The operating temperature is -4° to 122° Fahrenheit (-20° to 50° C).The package also includes a gateway to which the camera connects via Wi-Fi 2.4 GHz. The gateway connects to your home network using an Ethernet cable with a router and then the camera connects to the gateway. Then you can connect more cameras to the gate maximum 5.
mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accomodate Mikrotik Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable.The antenna comes packaged with all necessary accessories and cables.Note: Basebox wireless device pictured for illustrative purposes. It is not included.
GESP+PoE is a passive PoE injector with surge protection. Combine it with the GESP devices for maximum security and peace of mind.Here’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protector up there. It comes sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm. Now add the GESP+POE-IN injector below the mast - to protect the switches and to power the antennas.Don’t forget about the grounding wire! Secure it to the rackmount mast or any other structure that is connected to the ground. For maximum protection you should use a surge protector on both ends of long cables.The GESP units can usually absorb multiple impacts but make sure to check their condition after each surge. For attachment of GESP units it's recommended using PVC zip ties. Just don’t make it too tight. You know what they say – hope for the best prepare for the worst. This small investment can save lots of time and money so why risk it? Grab a GESP & GESP+POE-IN and put your mind at ease!
The Ubiquiti repeater and transceiver module enhances and extends your network's reach. With its Ethernet 1000Base-BiDi connectivity, it provides a reliable, wired connection that supports high-speed data transfer rates of up to 1.25 Gbps. This plug-in module can extend the network coverage up to 3 km, making it suitable for larger spaces needing robust connectivity.Engineered for durability and safety, the module meets IEC/EN 60825-1:2014 Class 1 standards, ensuring it operates safely within a broad temperature range from 0°C to 70°C. Its LC single-mode connectors allow for seamless integration with existing network infrastructure, making it a versatile addition to any setup. Whether you're looking to enhance your network's performance or extend its reach, the Ubiquiti repeater and transceiver module provides a reliable solution.
