The new AC standard is here, with up to 866Mbit over the air datarate, 256-QAMmodulation, and 80MHz channels. 802.11ac opens up new possibilities and speedsnever possible before.The SXT ac is a new member in our 802.11ac product lineup, currently two models areavailable — with regular 28 degree antenna, and the SA model with a 90 wide beamwidthsector antenna. Also supports 802.11a/n mode and is compatible with all legacyRouterBOARD devices, including Nstream and Nv2 protocols. Both devices come withGigabit Ethernet.• 1300mW RF output• extended temperature range -30C to +80C• up to 540Mbps throughput• low latency Point to Point
Cover reduces the noise, which improves the performance of the mounted device. The whole is made of aluminum and powder painted in light gray. CNC technology used in manufacturing process, shield is made with needed precision from grey coated aluminium.
Mikrotik smallest outdoor series model - a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4GHz or 5GHz, up to 80 MHz wide channel). The new Gigabit port will help you utilise the full benefit of 802.11ac high speed wireless. The Groove A (AP model) comes with Level 4 license and includes a Dual Band 2.4/5GHz Omni directional antenna (6dBi 2.4GHz, 8dBi 5GHz), so you can use the unit right out of the box, or use your own antenna.
Anti-noise shield for Ubiquiti airMAX Sector 17/90 base station antennas. Substantially reduces interference from nearby devices. Shield reduces noise level, helping improve signal strenght of base station set. AirMAX antenna and Rocket M5 are mounted inside aluminium cage, which additionally protects whole set against tough environmental conditions. CNC technology used in manufacturing process, shield is made with needed precision from grey coated aluminium.
This high gain directional multiband 4G panel antenna is designed for 800MHz (2G / 4G), 900Mhz (4G), 1800MHz (3G / 4G), 2100MHz (4G) and 2600MHz (4G) frequency band and supports all established standards like GSM, 2G, 3G and 4G (800 / 900 / 1800 / 2100 / 2600). The antenna has a gain of up to 14dBi and helps you to improve your 2G, 3G or 4G connection even on long distances. To get the best result the 2G/3G/4G antenna should aligned exactly to the transmitter base station it is connected to. This 4G antenna works perfectly with LTE / 4G devices which have external antenna port. Compatible 4G Routers with external SMA female antenna port:- Telekom Speedport LTE, Speedport LTE II- Telekom Speedbox LTE, SpeedBox LTE II, SpeedBox LTE III- Telekom Speedport Hybrid- Vodafone Easybox 904 LTE- Vodafone B1000, B2000, B3000- Vodafone LTE-Modem- Vodafone LTE-Turbobox LG FM300- O2 LTE Router- FritzBox LTE- Router (except FritzBox LTE 6842)- D-Link DWR-921- Huawei B390, B593, B890- Huawei E5186- Teltonika RUT230, RUT240, RUT550, RUT950, RUT955- Many more... Optionally we offer a pair of antenna cables of type RF240 with a length of 2.5m, 5m, 10m and 20m with N male to SMA male (fits to the most common LTE routers - see list above) connectors. The enclosure of the antenna is made of solid plastic and stainless steel. The robust, light weight and UV resistant construction is weatherproof. This allows to use this 4G antenna for outdoor appliances. The antenna is designed for mast/pole or wall handle installation. A mounting kit (angle bracket and u-clamp for 30-50mm diameter handles) is included. Product specificationsType of AntennaDirectional 2G/3G/4G LTE Antenna (2x2 MIMO)Gain10dBi @ 800-900 MHz, 14dBi @ 1800MHz-2600MHzImpedance50 OhmFrequency Range800-2600MhzVSWRmax 1.6GroundDC-GroundPolarisationHorizontal / Vertical (Linear)Beam Width30° Horizontal, 25° VerticalConnector2 x N femaleApplianceIndoor and OutdoorOperating Temperature-30° to 75° CMax input power50WMax wind load200km/hDimensions47cm x 31cm x 5cmWeight1.5kgColorWhiteDirectivityBi-Directional
This high gain directional multiband 4G panel antenna is designed for 2300-2600MHz (4G) frequency band and supports standards like 4G band 7 (2600Mhz) and band 40 (2300Mhz). The antenna has a gain of up to 17dBi and helps you to improve your 4G connection even on long distances. To get the best result the 4G antenna should aligned exactly to the transmitter base station it is connected to. This 4G antenna works perfectly with LTE / 4G devices which have external antenna port. Compatible 4G Routers with external SMA female antenna port:- Telekom Speedport LTE, Speedport LTE II- Telekom Speedbox LTE, SpeedBox LTE II, SpeedBox LTE III- Telekom Speedport Hybrid- Vodafone Easybox 904 LTE- Vodafone B1000, B2000, B3000- Vodafone LTE-Modem- Vodafone LTE-Turbobox LG FM300- O2 LTE Router- FritzBox LTE- Router (except FritzBox LTE 6842)- D-Link DWR-921- Huawei B390, B593, B890- Huawei E5186- Teltonika RUT230, RUT240, RUT550, RUT950, RUT955- Many more... Optionally we offer a pair of antenna cables of type RF240 with a length of 2.5m, 5m, 10m and 20m with N male to SMA male (fits to the most common LTE routers - see list above) connectors. The enclosure of the antenna is made of solid plastic and stainless steel. The robust, light weight and UV resistant construction is weatherproof. This allows to use this 4G antenna for outdoor appliances. The antenna is designed for mast/pole or wall handle installation. A mounting kit (angle bracket and u-clamp for 30-50mm diameter handles) is included. Product specificationsType of AntennaDirectional 4G LTE Antenna (2x2 MIMO)Gain17dBi @ 2300 MHz, 17dBi @ 2600MHzImpedance50 OhmFrequency Range2300-2600MhzVSWRmax 1.6GroundDC-GroundPolarisationHorizontal / Vertical (Linear)Beam Width35° Horizontal, 32° VerticalConnector2 x N femaleApplianceIndoor and OutdoorOperating Temperature-30° to 75° CMax input power50WMax wind load200km/hDimensions47cm x 25cm x 3cmWeight1.5kgColorWhiteDirectivityBi-Directional
Professional omni dual antenna with gain 9dBi that works in frequency range 850 MHz - 2600MHz. Due to its characteristics antenna significantly amplifies the signal and provides an opportunity to enjoy fast access to the Internet wherever it is necessary. Moreover antenna is equipped with a magnet at the base, which allow to mount the antenna on the vehicle's roof or other metal surfaces. Antenna comes with a 3m long RG174U cable. Frequency range: LTE - 900/2100/1800/2600 MHz DC-HSPA+/HSPA+/UMTS - 900/2100MHz GSM/GPRS/EDGE - 850/900/1800/1900MHz VSWR:
DDC-4824POE is the +/- 48VDC to 24VDC Dual-Input ( DC / Terminal block) PoE adapter, which design for telecom -48VDC environment to support passive 24V PoE outdoor AP/CPE device such as Ubiquiti, Mikrotik and Alfa Network or other passive 24V PoE device. With Redundant Dual-Input, it make your life easy and you don’t need to worry if electronic power drop.
TSM-B1 is the stainless steel ratchet mount with versatile four-way design that adapts easily to deck or side mounting on slanted or level surface. The quick action handle makes raising and lowering the antenna easy and return the antenna to its correct, upright position. With TSM1, you could easy mount with ALFA Tube series device.
Overview Alfa Power over Ethernet (PoE) Splitter PD-1000D (support DC output 5V, 9V, 12V, 18V) is revolutionary technology for powering Ethernet terminals such as IP Telephone sets, wireless access point, and Internet camera. The technology incorporates electrical power onto a LAN data line enabling the delivery of operating power in addition to data communicate to terminals over standard cabling infrastructure. Key Features · Convey power and data to your LAN equipment through Ethernet cable. · Standard IEEE802.3at/af. · Support 5V, 9V, 12V, 18V output adjustable. · Regulate output voltage by switch. · Delivering power and data to equipment. · Support Gigabit Ethernet. · Additional +/- 15KV of Ethernet isolation for ESD/Surge Protection.
Anti-noise shield for RouterBoard OmniTik U-5HnD and RouterBoard OmniTik UPA-5HnD substantially reduces interference generated by nearby electronic devices. It lowers noise levels improving signal quality. Shield is made from aluminium coated with light grey paint. Designed and manufactured using state-of-the-art CNC machines, it is beautifully made with needed precision.
The APOE03 Power over Ethernet (PoE) Passive Injector delivers both data and electrical power to passive PoE devices using a single Ethernet cable. Using PoE you eliminate the need to place an Ethernet device, such as a wireless access point or IP Camera giving you more freedom. The installation is simple and easy for APOE03 it does not require any tools or software. Plug the APOE03 into a power outlet and connect the APOE03 to your passive PoE device using any standard Ethernet cable. Once APOE03 setup has been completed the output power is compatible to any 5VDC, 12VDC, 24VDC, 48VDC, 57VDC (Max. 48W) Passive PoE-enable device. Key Features Support Fast Ethernet Passive PoE-enable device (PIN 1/2/3/6 Data. PIM 4/5/7/8 Power) Provide both data and electrical power to Passive PoE-enabled device Support Wide Range input/output DC Power (5V – 57V at Max.48W) Dual DC Power Input – 3-pin Screw Terminal Block and Power Jack Wall mount ability
The APOE03G is the Single-Port Gigabit ( 10/100/1000 Base-T) redundant PoE Midspan/Injector that provides DC power for PoE equipped Network Appliance device. It is compatible with devices that support the IEEE 802.3af/at standard PoE power feed using Mode B (Pins 4/5 and 7/8). The APOE03G features terminal block for Power redundancy, the power redundancy ensures that vital network capabilities are always available when needed, and also makes life easier for any IT Administrator who just doesn't want to have his sleep or his weekend interrupted by an untimely service call caused by a finicky power supply. Function: Transform DC through RJ-45 cable PIN# 4,5,7,8, into remote devices such as Wireless AP, IP Phone, IP surveillance Camera, etc. With the terminal block connector can be connected to the UPS allowing redundancy in the power source. Key Features Input: 1.1 Input Voltage: 5Vdc to 57Vdc, Nominal = 48Vdc General Description: 2.1 Operation Temperature: -0 ~ 40 2.2 Storage Temperature: -20 ~ 60 2.3 Operation Humidity: 10% ~ 80% Non-Condensing 2.4 RJ-45 Connector PinOut 2.5 DC Power Plug Diameter: 2.1Ø / 5.5Ø , Length: 12 ± 0.5mm 2.6 DC Power Plug Polarity: Inside (+), Outside (-)
Professional omni dual antenna with gain 9dBi that works in frequency range 850 MHz - 2600MHz. Due to its characteristics antenna significantly amplifies the signal and provides an opportunity to enjoy fast access to the Internet wherever it is necessary. Moreover antenna is equipped with a magnet at the base, which allow to mount the antenna on the vehicle's roof or other metal surfaces. Antenna comes with a 3m long RG174U cable. Frequency range: LTE - 900/2100/1800/2600 MHz DC-HSPA+/HSPA+/UMTS - 900/2100MHz GSM/GPRS/EDGE - 850/900/1800/1900MHz VSWR:
Professional omni dual antenna with gain 9dBi that works in frequency range 850 MHz - 2600MHz. Due to its characteristics antenna significantly amplifies the signal and provides an opportunity to enjoy fast access to the Internet wherever it is necessary. Moreover antenna is equipped with a magnet at the base, which allow to mount the antenna on the vehicle's roof or other metal surfaces. Antenna comes with a 3m long RG174U cable. Frequency range: LTE - 900/2100/1800/2600 MHz DC-HSPA+/HSPA+/UMTS - 900/2100MHz GSM/GPRS/EDGE - 850/900/1800/1900MHz VSWR:
Radome Cover for Mikrotik mANT 30dBi parabolic antennas!It reduces wind load, protects reflector surfaces from harsh environment, protects the antenna feed from falling objects, as well as positively affect the antenna sustainability and operational life. It's made of special material that has low dielectric constant. Wide range of temperature and direct sunlight won't affect it.
FeaturesEfficiency Over 75%Over-Voltage Protective InstallationShort-circuit Protective InstallationProtection Type: Auto-RecoverOperating Temperature 0C~+40CSpecificationsOutput Voltage 24 VOutput Rating 1A (24W)Input Voltage AC 100~240VInput Frequency 50~60HzOperating Temperature 0C~+40CStorage Temperature -20C~+85C
8 PORT POE INJECTOR GIGABIT supports 10/100/1000M Ethernet, LAN RJ45 sockets is for Switch/PC/HUB 1/2 & 3/6 & 4/5 &7/8 are transmitting data. FEATURES: – Use with any ethernet switch– Flexible power(DC 12V TO 57V)– 10/100/1000Mbps Gigabit Ethernet– Ideal for IP Cameras,VOIP,WiFi– 8 Port Injector(8 Lan & 8Lan + PoE port) OVERVIEW 8 PORT POE INJECTOR GIGABIT supports 10/100/1000M Ethernet, LAN RJ45 sockets is for Switch/PC/HUB 1/2 & 3/6 & 4/5 &7/8 are transmitting data. POE RJ45(power+data) socket is to deliver data and power. Pin 1/2 & 3/6 & 4/5 & 7/8 transmitting data, Pin 4/5(+) & 7/8(-) is for power. Passive PoE is composed of 4 set of RJ45 sockets and one 60V DC power jack. Input power requests 90W or more AC to DC power converter. The input DC hole diameter is 2.1mm and the other end OD is 5.5mm.The sum total output power must be lower than the Max input power of AC-DC power converter. If not, it is necessary to consider taking higher AC-DC power converter. There commended formula for AC-DC power converter is: 10W per RJ45 set (1 set = 2 x RJ45 sockets). For example, 8 x 10W = 80W for 8 port Passive PoE panel LED Indicator POWER LED:-POWER OFF –Off– 4/5 (V+),7/8 (V-) - Green LED– 4/5 (V-),7/8 (V+) - Red LED SPECIFICATIONS Input: 12-57V DC 2.1MM, Phoenix 3.5mmOutput: 12-57V PER PORT(1A Max)Data: 1/2&3/6&4/5&7/8Power: 4/5 & 7/8Data In: Connects PC/HUB/SwitchWeight: 160gDimensions: 180mm×60mm×25mmEthernet Cable: TIA/EIA 568 Cat. 5Data rate: 10/100/1000MbpsConnector: RJ-45Operating Temperature: 0°C ~ 40°CStorage Temperature: -40°C~+70°COperating Humidity: 10%~80%RHStorage Humidity: 5%~90%RHCertification: CE , FCC
The Sleeve30 kit for Mikrotik mANT30 parabolic antenna will enhance point-to-point link performance by reducing noise and will also reduce impact on adjacent RF devices by removing the side radiation from the antenna.Sleeve30 Kit also reduces wind load and protects antenna reflector and feed from harsh environment, improving PtP link sustainability.Sleeve30 shell is made of corrosion resistive, lightweight aluminum, front cover has excellent RF signal transparency.Includes aluminum shell, front cover, fasteners, silicone sealant.
Ubiquiti Networks introduces an innovative sector antenna for your Point‑to‑MultiPoint (PtMP) applications, the airPrism® 5 GHz 3x30° HD Sector Antenna AP-5AC-90-HD.The airPrism antenna features significant advances in noise isolation and beam performance to complement the Rocket®5ac Prism™ radios (not included) for co‑location deployments. 3 x 30° Beamwidth Coverage The three Rocket5ac Prism™ radios are installed at the top, middle, and bottom of the airPrism antenna. Each radio independently transmits and receives within its corresponding 30° beamwidth. Powerful Performance Highly resistant to noise interference, the airPrism antenna provides superior beam performance in high-density areas for high-capacity, multipoint networks. Breakthrough Design Mounted on a single airPrism antenna, three Rocket5ac Prism radios maximize throughput in an efficient tower footprint, minimizing installation and tower costs. Product Specifications • Dimensions: 322.6 x 201.5 x 1300 mm (12.7 x 7.03 x 51.18")• Weight: 13.1 kg (28.9 lbs)• Frequency Range: 5.15 - 5.85 GHz• Gain: 22 dBi• HPOL Beamwidth: 3 x 30° (6 dB)• VPOL Beamwidth: 3 x 30° (6 dB)• Electrical Beamwidth: 8° • Electrical Downtilt: 2°• Max. VSWR: 1.75:1• Polarization: Dual-Linear• Cross-Polarization Isolation: 30 dB Min.• Interfaces: (6) RP-SMA Connectors (Weatherproof)• Compatible Radio: Rocket5ac Prism• Wind Loading: 534 N @ 200 km/h (120 lbf @ 125 mph)• Wind Survivability: 200 km/h (125 mph)• Mounting: Universal Pole Mount, Rocket Bracket, and Weatherproof RF Connectors Included• ETSI Specification: EN 302 326 DN2• Certifications: CE, FCC, IC
Anti-noise shield for Ubiquiti airMAX Sector 20/90 and 16/90 base station antennas. Substantially reduces interference from nearby devices. Shield reduces noise level, helping improve signal strenght of base station set. AirMAX antenna and Rocket M5 are mounted inside aluminium cage, which additionally protects whole set against tough environmental conditions. CNC technology used in manufacturing process, shield is made with needed precision from grey coated aluminium.
4 PORT POE INJECTOR supports 10/100/1000M Ethernet, LAN RJ45 sockets is for Switch/PC/HUB 1/2 & 3/6 & 4/5 &7/8 are transmitting data. FEATURES: – Use with any ethernet switch– Flexible power(DC 12V TO 57V)– 10/100/1000Mbps fast ethernet– Ideal for IP Cameras,VOIP,WiFi– 4 Port Injector(4 Lan&4 Lan+PoE port) OVERVIEW 4 PORT POE INJECTOR supports 10/100/1000M Ethernet, LAN RJ45 sockets is for Switch/PC/HUB 1/2 & 3/6 & 4/5 &7/8 are transmitting data. POE RJ45(power+data) socket is to deliver data and power. Pin 1/2 & 3/6 & 4/5 & 7/8 transmitting data, Pin 4/5(+) & 7/8(-) is for power. Passive PoE is composed of 4 set of RJ45 sockets and one 60V DC power jack. Input power requests 90W or more AC to DC power converter. The input DC hole diameter is 2.1mm and the other end OD is 5.5mm.The sum total output power must be lower than the Max input power of AC-DC power converter. If not, it is necessary to consider taking higher AC-DC power converter. There commended formula for AC-DC power converter is: 10W per RJ45 set (1 set = 2 x RJ45 sockets). For example, 4 x 10W = 40W for 4 port Passive PoE panel. LED Indicator POWER LED:POWER OFF –Off4/5 (V+),7/8 (V-) Green LED4/5 (V-),7/8 (V+) Red LED Input: 12-57V DC 2.1MMOutput: 12-57V PER PORT(1A Max)Data: 1/2&3/6&4/5&7/8Power: 4/5 & 7/8Data In: Connects PC/HUB/SwitchWeight: 85gDimensions: 115mm×45mm×25mmEthernet Cable: TIA/EIA 568 Cat. 5Data rate: 10/100/1000MbpsConnector: RJ-45Operating Temperature: 0°C ~ 40°CStorage Temperature: -40°C~+70°COperating Humidity: 10%~80%RHStorage Humidity: 5%~90%RHCertification: CE, FCC
ItemSpecificationsAntennaFrequency Range824~960/1710~2170MHzPolarizationLinearGain2dBi（Zenith）V.S.W.R＜2.0Impendance50ΩMechanical CableRG174 or othersConnectorSMA or othersRadome MaterialABSMounting MethodScrewEnvironmentalOperating Temperature -40℃~+85℃ Relative HumidityUp to 95%Ingress ProtectionIP67 (exclude cable outlet)Vibration10 to 55Hz with 1.5mm amplitude 2hoursEnvironmentally FriendlyROHS Compliant
ItemSpecificationsFrequency Range824~960/1710~2655MHzPolarizationLinearGain2.5dBiV.S.W.R＜2.0Impendance50ΩPCB Dimension115*9*0.8mmCableRG174Connector/SMA or othersRadome MaterialEVAMounting MethodAdhesiveOperating Temperature -40℃~+85℃ Relative HumidityUp to 95%Ingress ProtectionIP67Vibration10 to 55Hz with 1.5mm amplitude 2hoursEnvironmentally FriendlyROHS CompliantCable Length1.5m
Wall mount bracket for client antennas installation to the wall. The mounting system comes with 4 holes for bolts. Wall Mount Bracket , galvanized steel Product description: Wall mounted bracket to hold satellite dishes or UHF Aerials / AntennasLength: 350mm Stand Off from the wallDiameter: 38 mmMaterial: Galvanized steel with black plastic capweight: 1.25 kg
Wall mount bracket for client antennas installation to the wall. The mounting system comes with 4 holes for bolts. Wall Mount Bracket , galvanized steel Product description: Wall mounted bracket to hold satellite dishes or UHF Aerials / AntennasLength: 450mm Stand Off from the wallDiameter: 38 mmMaterial: Galvanized steel with black plastic capweight: 1.39 kg
Wall mount bracket for client antennas installation to the wall. The mounting system comes with 4 holes for bolts. Wall Mount Bracket , galvanized steel Product description: Wall mounted bracket to hold satellite dishes or UHF Aerials / AntennasLength: 600mm Stand Off from the wallDiameter: 38 mmMaterial: Galvanized steel with black plastic capweight: 1.6 kg
Product description Steel Pipe Mount Front L 250mm with fixing the pipe / mast (balcony railings), you can install using plugs. Details: Length: 250mmHeight: 220mmPipe diameter: 38mmWeight: 1.15Galvanised
