AUKEY CB-SCC102 silicone ultra-fast USB-C Quick Charge Power Delivery USB-C cable 1.8m Silicone super-strong braid built-in E-Marker chip - superfast charging and transfer (100W | 5A | 20V) AUKEY cables are characterised by their high quality, unique design and attention to detail. We go to great lengths to ensure that our cables meet the highest standards, we use the latest technologies and materials that make them extremely durable, functional and a great addition to premium devices. Quality, durability and timeless design Aukey charging and data cables prove their quality from their exclusive packaging through to their performance and build quality. They are characterised by a durability of > 4,000 cycles and, depending on the model, are reinforced by the use of nylon braid, Kevlar, silicone and high-quality gold-plated terminations, which translates into long life and safe use. The multi-layer shielding allows the highest transmission parameters to be maintained, which runs without the slightest interference. Forget about bent and tangled cables! No one likes tangled cables Aukey focuses on aesthetics and user convenience and presents the world a cable with a unique design. The cable does not get tangled and looks great. The cable's wires are made of high-quality material and are additionally protected with a mesh and aluminium sheath. This is an extremely durable cable that will last for a long time.
EK Water Blocks EK-Quantum Surface S360 - Black At just 30mm thick, the EK-Quantum S-Series surface radiators are ideal for cases with limited space. Despite the reduced thickness, they deliver exceptional performance at very low and medium fan speeds. A total of 16 2mm wide copper tubes along the entire length of the radiator ensure optimal coolant flow and do not burden your cooling loop. High-quality finless copper fins with a density of 20 FPI offer the best balance between heat transfer and air resistance for optimal performance even at low speed fan operation. EK would not recommend a push/pull setup on an EK-Quantum S-Series surface radiator as it does not provide a proportional increase in performance. If more cooling power is needed, installing additional radiators is a good option. New and improved The EK-Quantum Surface S Series cooler maximizes performance by using a new cooler core. When comparing core-to-core performance, the Surface S cooler performs up to 20% better than its predecessor, the CoolStream SE, due to its improved fin structure and optimized core. EK-Quantum Surface Premium radiators are based on years of development and market research to deliver the best product in every respect that the market demands. The processing of the materials, the mechanical rigidity and the performance have been taken to a new level. Like all other products in the Quantum Line, EK's brand new surface coolers offer numerous performance improvements, including thermal performance, coolant flow restriction and airflow restriction. With the included screws, this cooler is compatible with 120mm fans, which have a thickness of 25mm as standard. EK recommends using EK fans or similar with sealed frames. This classic but effective square shape of the fan housing ensures optimal performance in pull (suction) or push (pressure) mode without hydraulic losses, ensuring the optimal cooling performance of your liquid coolers. Thick extruded aluminum end caps with a contrasting silver finish give the cooler a premium look and feel. They cover the interior and connect the stamped side panels, creating a sturdy structure that is comfortable to handle. The stainless steel side panels are coated with durable semi-gloss black paint, while the fins themselves feature a special black matte coating with a high thermal conductivity coefficient. M4 screws – standardized, easy to find Heavy-duty black M4 Philips round head screws are included for ease of use. In general usage scenarios, EK strongly recommends using only the included screws to avoid damage to the cooler itself. However, the M4 screw compatibility allows users to source longer screws if needed. The cooler core is designed in such a way that even if the customer accidentally uses longer screws, it will not affect the structural integrity of the cooler core as they will only collide with the fins. Easy disassembly – DIY modding dream The EK Quantum Surface range has been designed and engineered as a modular product range rather than individually sized radiators. Such a design ensures a flawless fit and continuity in appearance while making the disassembly process very simple and straightforward. EK has always supported the DIY modding community, so painting and modifying your Surface radiator is a breeze. Loop friendly – Don’t worry about your pump The internal structure of the coolers has been designed with low flow restriction so as not to place unnecessary strain on the rest of the cooling loop. This means that you can add multiple radiators to your cooling loop using just a single pump (D5 or DDC). The coolers are also airflow friendly and low restriction, allowing operation at lower fan speeds while maintaining the same performance. Low airflow restriction ensures that the case is well ventilated and other radiators in the case can breathe properly. EK-Matrix7 compatible – for the cleanest pipe runs Since each custom liquid cooling loop is made up of multiple EK products, the most valuable difference in terms of aesthetics and usability comes from the sum of all the parts. To address this problem, EK launched Matrix7, a system that standardizes product dimensions and connector location and spacing. This way, we make liquid cooling loop assembly more intuitive and ensure a clean set of parallel pipe runs easier than ever before. All EK-Quantum Surface emitters are EK-Matrix7 compatible, meaning they integrate effortlessly with Reflection², the second generation of Quantum distribution panels. This allows the user to easily swap and upgrade between S-, P- and X-series surface emitters within the same enclosure (provided the enclosure supports thicker emitters in the same position). The EK-Quantum Surface S cooler wins TechPowerUp's Editor's Choice award The EK-Quantum Surface S radiators have been awarded the Editor's Choice award by TechPowerUp. They praise this product and list the following benefits among others: good value for money, increased case compatibility, excellent thermal performance for the form factor, little restriction of coolant flow, two color options to choose from, modifiable with replacement cover plates and so on. "I will happily recommend the EK-Quantum Surface S," says the reviewer, "and look forward to trying out the rest of the EK-Quantum Surface cooler series!" Technical and material specifications: High-quality fins made of 99.9% copper Copper H90 pipes End tank chambers made of brass H62 Stainless steel side panels End caps made of extruded aluminium, silver anodised Brass nickel-plated adapters and plugs Dimensions: 405 x 130 x 30 mm (L x W x H) Weight: 0.95kg FPI: 20 Connection thread: 2x G1/4 inch Fan compatibility: 120 x 120 x 25 mm fan Pressure tested: 1 bar Attached: EK-Quantum Surface S-Series Coolers 12 x M4 x 30 mm for 25 mm thick fans 12 x M4 x 5 mm for direct mounting of the cooler to the case. Designed and engineered in Slovenia, manufactured in China.
Rave Neo 2 | Colour Black | Speaker features Portable/Waterproof/Wireless | System profile 2.0 | Speaker Output Power 80 | Battery run time up to 18 hours
Shelly BLU Bluetooth door/window sensor (white) Shelly BLU detects the opening and closing of doors and windows and has a light sensor. It can also measure the angle of the door or window. It is powered by a CR2032 battery (included), which has a lifespan of 5 years. It will find its use in homes, offices, restaurants, stores, hotels, etc. In addition, it connects wirelessly via Bluetooth 4.2 and provides a range of up to max. 30 m. 2 operating modes In Regular mode, the device sends information about the current status of the door/window, light intensity and battery status every time it is opened/closed. In addition, it checks the tilt angle every 8 seconds. In Beacon mode, on the other hand, the sensor sends information about the current opening/closing status, light intensity and battery status every 30 seconds. You enable the mode in the device settings in the Shelly Smart Control app. ManufacturerShellyModelBLU Door/WindowColorwhiteDimensions35 à 35 à 7 mm ±0.5 mm (Sensor Unit), 35 à 12 à 7 ±0.5 mm (Magnet)Weight10 g ±1 g (sensor + battery), 8 g ±1 g (magnet)MaterialPlasticAmbient temperature-20 °C to 40 °CHumidity30% to 70% relative humidityPower supply1x 3 V CR2032 battery (included)Battery life5 yearsReed switchYesG-sensorYesLight sensorYesRF band2400 - 2483.5 MHzMax RF power4 dBmBluetooth version4.2Bluetooth rangeUp to 10 m, indoors, up to 30 m outdoors (Depends on local conditions)EncryptionAES (CCM mode)
TWS EarFun Air life headphones (purple)The EarFun Air Life headphones are ideal for lovers of great sound quality and comfort. With 12-millimeter dynamic drivers, they offer deep bass and crystal clear sound that will delight whether you're listening to music or watching movies. Equipped with 4 microphones with ENC, they provide clear conversations in all conditions, eliminating background noise. The long operating time and ergonomic design guarantee comfortable everyday use, and the IPX5 water resistance makes them the perfect companion for workouts.Deep bass and excellent sound qualityEarFun Air Life headphones are equipped with 12-millimeter composite dynamic drivers that deliver powerful and full of depth sound. EarFun Air Life offer powerful bass and crystal clear tones for an amazing listening experience that's perfect for anything from listening to your favorite playlists to watching movies.Clear conversations with smart technologyEarFun Air Life is the perfect choice for people who appreciate the comfort of making calls in any conditions. The headphones are equipped with 4 microphones that use smart ENC technology. It effectively eliminates ambient noise, allowing you to focus on your caller, no matter where you are.Up to 35 hours of listeningImmerse yourself in music for longer! The headphones offer up to 11 hours of playback on a single charge, and the charging case provides an additional 24 hours of operation for a total of up to 35 hours without charging. So you can enjoy full freedom without worrying about being discharged when you least expect it.The latest version of Bluetooth 5.4Delays or interference are a thing of the past! EarFun Air Life use the latest version of Bluetooth technology - 5.4, which allows you to enjoy even faster sound transmission. A special mode created with gamers in mind ensures extremely low latency - less than 0.1 seconds. This ensures that every action and sound are perfectly synchronized, providing an immersive gaming experience.Everyday comfortWith IPX5 waterproof certification, EarFun Air Life are sweat- and water-resistant, making them ideal for workouts and outdoor activities. The ergonomic design provides a stable and comfortable fit, so you can wear them for long hours without discomfort.Full controlThe EarFun Air Life headphones give you full control over the most important functions with intuitive touch panels. With them, you can conveniently adjust the volume, change songs, pause or resume playback, and activate the voice assistant. All this without having to reach for your smartphone!Get more with the appWant to gain access to more features? Download the EarFun Audio app, available on Android and iOS! With it, you can customize the sound of the headphones to suit the type of music with the equalizer, personalize the functions of the touch panels or check the charge level. In case you lose your headphones, the app will also help you quickly locate them.Included:HeadphonesCharging case ManufacturerEarFunModelAir LifeColorPurpleHeadphone typeDocphoneTransducer diameter12 mmActive noise cancellation (ANC)NoBluetooth profilesA2DP / AVRCP / HFPConnectionWireless - Bluetooth 5.4RangeUp to 15 mMicrophones4 with smart ENC technologyAdditional features-Earphone battery capacity60 mAh x2Charging case battery capacity380 mAhOperating time on a single charge11 hoursTotal operating time with charging case35 hoursCharging time for headphones1.5 hoursCharging time of charging case2 hoursCharging portUSB-CResistanceIPX5Weight38 gDimensions61.8 x 25.7 x 46.9 mmCompatible with the appEarFun AudioApp compatibilityAndroid 7.0 and above, iOS 13.0 and above
Foneng EU28 network charger, 1xUSB, QC 3.0 + Micro USB cableUse the Foneng EU28 charger to quickly charge your device. The product automatically adjusts the charging parameters to the connected device and is compatible with a voltage range of 100-240V. Therefore, you can use it no matter where you are. In addition, the use of ABS and PC V0 plastics translates into resistance to overheating, fire and scratches. In addition, the product works with smartphones, tablets, iPads, game consoles, etc.IncludedchargerUSB-A to micro USB cableManufacturerFonengModelEU28ColorwhiteInput voltageAC100-240V 50/60Hz 0.3AOutput voltage5V-2.4AMaterialABS + PC V0
Foneng W01 wireless charger for Apple Watch 2.5W (gold)The Foneng W01 wireless charger is designed specifically for Apple Watch users. With its 2.5W power, it provides fast and safe charging for your watch, no matter which model you use. Compact and portable, it's perfect for both at home and on the go.Fast and efficient chargingThe Foneng W01 offers the performance you expect from a compact wireless charger. The 2.5-watt power provides fast charging, and the magnetic connection allows the charging process to begin immediately when the watch comes into contact with the charger. The W01 model will be ideal for Apple Watch series 1, 3, 5, 6, SE or Ultra.Maximum convenience of useThe compact design and practical length of the cable (1m) provide convenience for daily use. Thanks to the handy silicone tag, you can easily clip it to your backpack or bag, making it a practical gadget for those who value mobility.Safety firstThe Foneng W01 is equipped with a number of safety features that protect your watch from overheating and overloading. Thanks to an intelligent temperature control system, the charger maintains a low temperature during operation, guaranteeing safe charging of your Apple Watch. ManufacturerFonengModelW01ColorGoldCharging power2.5WCompatibilityApple Watch series 1/3/5/6/SE/UltraCable length1 mMaterialZinc alloy + ABS + silicone
Niimbot thermal labels stickers 12x40 mm, 160 pcsThe set includes a roll that allows you to print 160 pieces of 12 x 40 mm labels. It is dedicated to Niimbot D/H1S series thermal printers. It will be useful for printing prices, expiration dates, QR and EAN code, emoticons, serial number, table and much more. Animal sticker design makes the labels look even more interesting.Resistant to wear and tearThe labels were created from high-quality paper. They are resistant to high and low temperatures. They are durable, do not wear out and perform their function for a long time. You will successfully use them on containers with boiling water or containers with frozen food. Label without limits. ManufacturerNiimbotModelT12*40-160ZOOColorwhiteSticker size12 x 40 mmNumber of printed labels160FitsNiimbot D-series and H1S printers
Pimestamisvastane 26,12 cm (10,3 tolli) E-Ink Mobiuse puuteekraan; Võimas neljatuumaline protsessor ja 2 GB muutmälu sujuvaks lugemiseks ja töötamiseks; SMARTlight valguse värvi ja heleduse reguleerimiseks; 32 GB sisemälu mahuka ...
