IDEAL WHERE SPACE IS LIMITED Unlike normal case fans, which are 25 mm thick, the P12 Slim PWM PST has an installation depth of only 15 mm. This makes it a predestined fan for small form factor builds. OPTIMISED FOR STATIC PRESSURE During the development of the new P12 Slim PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 Slim PWM PST is particularly suitable for use on covered case vents or inlets with filters. MORE EFFICIENT TECHNOLOGY The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 Slim PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance. MAXIMUM QUIETNESS, MINIMUM VIBRATION Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. EXTENDED LIFE SPAN A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years. 300 TO 2100 RPM REGULATED VIA PWM PST With a wide range of regulation and the PWM Sharing Technology (PST), the P12 Slim PWM PST fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed. HIGH QUALITY BEARING Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Technical Data General Fan Speed: 300 - 2100 rpm Airflow: 41.1 CFM/ 71.53 m³/h Static Pressure: 1.45 (mm/H2O) Noise Level: 0.3 Sone Fan Fan Frame: Standard RPM-Controll: PWM Connector: 4-Pin-Connector + 4-Pin-Socket Fan Bearing: Fluid Dynamic Bearing Elektrical Specification Typical Voltage: 12 V DC Startup Voltage: 4 V Current: 0.12 A Cable Length: 400 mm Size & Weight Length: 120 mm Width: 120 mm Heigth: 15 mm Weight: 85 g
M.2 (2280) PCIe 3.0 x 4, Samsung 3D-NAND TLC with 128 layers (V-NAND v6) and the Samsung Pablo controller. The maximum performance is rated at 3100 MB/s read and 2600 MB/s write (SLC cached).
HyperX Alloy Origins™ 60 on kompaktne ja stabiilne klaviatuur, millel on HyperX kvaliteetsed nupud. Tulemuseks on parim võimalik tasakaal vastupidavuse, elegantsuse ja kasutatavuse vahel. Nuppudel on RGB LED valgustus. Klaviatuuri raam on valmistatud alumiiniumist, mistõttu püsib see paigal ka kõige olulistematel hetkedel. Klaviatuuril on ka eemaldatav USB-C juhe, seega on klaviatuuri kerge endaga kaasas kanda. • 60% klaviatuuri suurus • HyperX mehaanilised RED Switch nupud • Game Mode, 100% anti-ghosting ja N-key rollover funktsioonid
HyperX Alloy Origins™ 60 on kompaktne ja stabiilne klaviatuur, millel on HyperX kvaliteetsed nupud. Tulemuseks on parim võimalik tasakaal vastupidavuse, elegantsuse ja kasutatavuse vahel. Nuppudel on RGB LED valgustus. Klaviatuuri raam on valmistatud alumiiniumist, mistõttu püsib see paigal ka kõige olulistematel hetkedel. Klaviatuuril on ka eemaldatav USB-C juhe, seega on klaviatuuri kerge endaga kaasas kanda. • 60% klaviatuuri suurus • HyperX mehaanilised RED Switch nupud • Game Mode, 100% anti-ghosting ja N-key rollover funktsioonid
Mouse Pad XXL Extra-large mouse pad with optimized surface texture and enough room for both mouse and keyboard Extra-large sized mouse pad with enough room for your mouse and keyboard; 930x300x3mm The optimized surface texture provides optimal accuracy and smooth control Works with all mice, no matter the sensitivity or sensor Stays in place due to the anti-slip rubber bottom
Logitech MX Palm Rest - klaviatuur wrist rest Product Type: klaviatuur wrist rest mõõtmed (WxDxH): 42 cm x 6.4 cm x 0.8 cm kaal: 180 g värv: Grey Manufacturer Warranty: 2-year garantii
Mouse Pad M Smooth mouse pad with anti-slip rubber bottom and an optimized surface texture; suitable for all mice Medium sized mouse pad; 250x210x3mm The optimized surface texture provides optimal accuracy and smooth control Works with all mice, no matter the sensitivity or sensor Stays in place due to the anti-slip rubber bottom
Naudi vaadet kompaktsel ning säästlikul VA paneeliga Full HD monitoril. • Kitsas raam ja väike statiiv võtab vähem ruumi • ComfortView funktsioon ja vähendatud särin aitavad silmaväsimuse vastu • AMD FreeSync
GXT 265 Cintar RGB Headset Stand RGB-illuminated headset stand with two USB ports Headset stand for safe storage of your gaming headset Tidy desk solution to keep your gear organised Super stable, weighted design with non-slip rubber feet Universal fit, holds all wired and wireless headsets (up to 215mm) Two USB ports to connect other devices like your mouse and headset LED-illuminated edges with breathing RGB Sleek and sturdy look
Optimised for Static Pressure During the development of the new P14 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM PST is particularly suitable for use on heatsinks and radiators. More Efficient Technology The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P14 PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance. Maximum Quietness, Minimum Vibration Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. Extended Life Span A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years. 200 to 1700 RPM regulated via PWM PST With a wide range of regulation and the PWM Sharing Technology (PST), the P14 PWM PST fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed. High Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Technical Data Performance Fan Speed: 200 - 1700 rpm Airflow: 72.8 CFM/ 123.76 m³/h Static Pressure: 2,40 (mm/H2O) Noise Level: 0.3 Sone Fan Fan Frame: Standard Controll Typ: PST Connector: 4-Pin Connector + 4 Pin Socket Fan Bearing: Fluid Dynamic Bearing Electric Characteristics Typical Voltage: 12 V DC Starting Voltage: 3.9 V Current: 0.12 A Cable Lenght: 400 mm Size & Weight Lenght: 140 mm Width: 140 mm Height: 27 mm Weight: 194 g
Improved Cooling Performance by New Production Process The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity. Wide RPM Range The Alpine 23 features a new motor technology with a very wide, PWM-controlled RPM range. This keeps the noise level at a minimum while guaranteeing maximum cooling performance when needed. Lower Power Consumption & Minimum Vibration The new Alpine 23 is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5 % of the vibration from commutation of a regular DC-motor. These factors contribute towards saving energy, lowering the coil temperature and reducing vibrations to a minimum without compromising performance. High Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Extended Life Span A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Pre-applied MX-2 Thermal Paste The pre-applied, high-performance MX-2 thermal compound ensures fast and clean installation. Easy and Tool-free Installation Thanks to the mounting clips, the installation is really easy. Alpine 23 is simply plugged onto the existing AMD retention modules and screwed tight. Technical Data Compatibility AMD Socket: AM4 Ram Clearance: unlimited Warranty: 6 Years Heatsink Outer Diameter: 93.4 mm Fin Material: Aluminum Number of Fins: 50 Y-shaped Fins Thermal Paste: MX-2 pre-applied Fan Fan Diameter: 90 mm Fan Speed: 100 - 2000 rpm Fan Bearing: Fluid Dynamic Bearing Noise Level: 0.3 Sone Current: 0.06 A Connector: 4-Pin Size & Weight Lenght: 98.6 mm Width: 121 mm Height: 65 mm Weight: 275.5