RAM® Form-Fit turvahäll Garmin Astro 220, GPS 60 ja GPSMAP 60 seeria jaoksTOOTETEAVERAM-HOL-GA12U koosneb ülitugevast komposiitalusest ja aukude mustrist, mis võimaldab kinnitada kõikidele RAM-i komponentidele või alustele, mis sisaldavad universaalset AMP-augumustrit. See turvahäll on ühilduv ja vahetatav paljude populaarsete RAM-i paigaldustoodetega ning on valmis täiendama teie GPS-i ja muutuma teie sõiduki kõige kasulikumaks tarvikuks.Kaasas on kahe mutri ja poldi komplekt, mis ühendavad hoidiku mis tahes RAM-i komponentide või alustega, mis sisaldavad universaalset AMP-i avamustrit.RIISTVARA KAASA(2) #8-32 x 1/2" masinakruvid(2) #8-32 x 5/8" masinakruvid(2) #8-32 x 3/4" masinakruvid(2) #8-32 Nylock MutridAUKUMUSTER – 2-auguline AMPS: 1,912"MATERJALID – ülitugev komposiitPAKENDI TÜÜP - polükottKAAL - 0,11 naela.LISAINFORMATSIOONSelle kinnituse jaoks on vaja standardset vööklambri nuppu, mis on Garminilt GPS-seadme ostuga kaasas.
The RAM-HOL-TAB18U consists of a spring loaded back plate and custom support cups for the Google Nexus 7 and the LG G Pad 7.0 WITH OR WITHOUT LIGHT DUTY SLEEVE. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB18U is just what you need to get the most out of your tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
The RAM Tough-Tray™ is spring loaded expandable tray that can accommodate 10 to 16 inch wide laptops. The tray includes four side clamping arms with rubber grips to keep your laptop secure in any rugged environment. These arms can be moved both vertically and horizontally, allowing a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics.
The RAM® EZ-Roll’r™ cradle for the iPad (5th Gen), iPad (6th Gen), iPad Air 1-2, and the iPad Pro 9.7 secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM® EZ-Roll’r™ cradle also features two attachment points on the back to attach a RAM® round ball base.
The RAM-202CNSU consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base with 3/8"-16 female threaded hole. This mount has pre-drilled holes, including the universal AMPS hole pattern.
The RAM® Tab-Tite™ spring-loaded, quick release holder offers a secure fit with easy access to the mounted tablet. The spring-loaded design makes it easy to insert and remove your tablet, while keeping it secure in a variety of applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all buttons, ports, and tablet functions. Included is a set of four nuts and bolts to attach the holder to any RAM® components that contain the universal AMPS hole pattern. For off road environments and use in open cockpit applications, we recommended the use of a tether to assist in securing your device. The RAM® Tab-Tite™ holder is compatible with any tablet within the listed dimensions.
RAM® Suction Cups are regarded as one of the most impressive suction cups in the world. Their incredible holding power is surprising when considering how most suction cups function. When two suction cups are used together the performance is amazing. The RAM® Dual Articulating Suction Cup is an amazing innovation in suction cup mounting. With the ability to independently articulate each suction cup, this mounting base can be used in a variety of applications such as curved windows and surfaces. Whether you are mounting to a curved surface on a vehicle, or a curved windshield, this product is the ideal solution for secure suction cup mounting.
The RAM Non-Locking Powered Vehicle Cradle for the Samsung Galaxy Tab Active 8.0 by RAM Mounts was designed to meet the demands of field workers in a variety of applications including transportation, field sales, logistics, and manufacturing. The cradle can rotate easily for both portrait and landscape operations of the tablet. The NFC reader and stylus for scanning NFC tags are easily accessible while mounted in the cradle. Included is a 12V car cigarette charger which provides power to the tablet through its pogo pin interface, while the tablet is mounted. A set of four nuts and bolts are provided in order to connect the holder to any RAM components or mounts that contain the universal AMPs hole pattern.
OVERVIEWThe RAP-B-101U-G4 consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and round adapter base that attaches directly to the bottom of the Garmin echo™ and Striker™ 4 Series. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Included is hardware that is used to attach the Garmin echo™ to the RAM Mount.
The RAP-B-378-UN10U consists of the flex adhesive base with 1" ball, double socket arm and universal X-Grip® cradle. Using a PSA stick pad, put the flex adhesive mount practically anywhere you want to keep your portable electronics easy to see and always within your reach. Designed with a very small foot print, finding a home on your scooter, motorcycle, kayak, boat or vehicle dash is easy. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
The RAM-B-217U consists of two 1" diameter rubber balls connected to a post and 2.5" diameter round base. The round base has pre-drilled holes, including the universal AMPs hole pattern and 3-hole 120 degree pattern. The 1" balls measure center to center 2.5" apart.
The Tough-Wedge™ is a mount that fits in the gap between the vehicle seat and center console or potentially a center seat. This allows for easy access and operation of a mobile device. The Tough-Wedge™ can also be used for back-seat applications by inserted into the pockets located on the back of the front seats. For capturing video on the go, place the Tough-Wedge™ in your backpack with a RAM camera mount. The included diamond adapter contains the industry standard AMPS hole pattern that allows attachment to a variety of RAM mounts. Hardware included to attach the Tough-Wedge™ to the mount. The 1" diamond ball base is compatible with all RAM-B size single and double socket arms. Included in this kit is an innovative Expansion Pouch accessory for the RAM Tough-Wedge™. This optional accessory is designed to add stability to your wedge mount for vehicle with a larger gap between seats. The Expansion Pouch fits inside the Tough-Wedge™ sleeve and is then inflated with the hand pump to the desired level, ensuring your device stays firmly in place.
Easy and convenient describe the RAM EZY-Mount™ line of products. Utilizing a quick release male to female union, these mounts are absolutely perfect for those who want the most secure, yet rapid release and portable kit possible. How does it work? Mate an EZY-Mount™ male or female component to any RAM cradle or device with the standard AMPS hole pattern. Align the two parts and snap into place. To release, push back the release tab and go. One of the best features is the ability to easily swap out your GPS for MP3 or your radar detector for XM radio.
Ideally suited for a wide range of applications and fishing vessels, this rod holder is quickly becoming known as the most versatile rod holder on the market. This configuration includes the RAM ROD® Revolution ratchet arm with single open socket. Combining the patented RAM rubber ball and socket system with a ratcheting feature; this rod holder has almost infinite adjustability and configuration options. Easily collapse the rod holder down on the deck for clearing your casting path or articulate over the water, and out of the boat or kayak. Rod holder doubles as a stake out pole holder.
The RAP-395-PU consists of the RAM STACK-N-STOW™ Bait Board and 3" long spline post. The bait board includes a magnetic surface for bait knife, hooks, lures or any ferrous metal item, never again scramble to find your essential tools while on the water. With various extension pole options for post and spline you can get creative with your install. Integrated features for hanging tools, lures, clippers, mounting a GoPro® camera, cup holders and much more, this bait board is a feature rich option for the savvy angler. With the 3" long spline post, located on the bottom of the board, easily integrate it to your existing spline post base, or choose from an assortment of RAM compatible bases. The bait board will also accommodate pipes and extension poles with a diameter of 1", and with a fish on the line, quickly rotate the bait board away from the action. Tightening of the included knob will resecure the bait board.
The RAP-B-200-1-18U consists of an 18" rigid aluminum rod and (2 qty) single socket arms for 1" ball bases/adapters. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The single socket is compatible with all 1" ball bases and adapters.
The large version of the RAM® Torque™ handlebar mounting base features a 1" B size RAM® rubber ball and is compatible with rails 1 1/8” to 1 1/2" in diameter. Sizing inserts are included to provide a tight fit while also protecting the mounting surface. The large RAM® Torque™ mounting base also includes nylon-insert lock nuts to prevent loosening in high vibration environments.
The RAM-B-236U consists of a 1" rubber ball connected to a 3/8"-16 threaded post. Thread length is .5". The RAM-B-236U will attach to all 1" diameter ball compatible arms.
The RAM-B-259U is designed to mount to the lip edge of a flat surface up to 5/8" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplane. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base allowing you to connect a RAM 1" diameter arm socket and connection plates to create the perfect mount for your application.
The RAM® Tough-Claw™ is the perfect mounting base for toolless installation and removal on round, square, and odd-shaped rails and bars. The large version of the RAM® Tough-Claw™ can quickly be clamped on rails ranging from 1" to 2.2" in outer diameter and is ideal for mounting phones, tablets, action cameras, rod holders, and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars of bicycles and motorcycles, or even on kayak rails and roll bars, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection.
The RAM-B-189-TAB3U consists of a double 3.3" twist lock suction cup base, double socket arm, round base adapter and Tab-Tite™ universal clamping cradle. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The spring loaded Tab-Tite™ cradle makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
The RAP-B-201U, composite standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
The RAM-B-337U consists of a 1/4"-20 female thread hex hole connected to a B size 1" rubber ball, allowing you to take advantage of the RAM® ball and socket system in a variety of applications.
The RAM® Torque™ handlebar and rail mounting base has a 1.5” rubber ball and accommodates bars 3/4” to 1” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert lock nuts to prevent loosening in high vibration environments.
The RAM-HOL-UN7-400U consists of the small Tough-Claw™ base and universal X-Grip® cradle. The X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your smart-phone behind foam pads and plastic. The X-Grip® cradle expands and contracts for perfect fit of most smart phones. This mount rotates 360 degrees. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
The RAM-224-3U consists of a triple suction cup base with 1.5" diameter ball. The RAM-224-3U is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the RAM-224-3U on a glass or non-porous plastic surface.
RAM-HOL-MA10U Features:Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.Cradle Material: Black high strength composite.Cradle Hole Pattern: The back of the cradle has two pre-drilled holes compatible with the AMPS hole pattern (1.912 inches from center hole to center hole).Cradle Description: Place the top of the electronic device into the cradle, and then push the base into the expandable arms at the bottom of the cradle. The arms will then snap into place when the electronic device is completely secured in the cradle. The cradle allows all cables (NOT INCLUDED) to stay connected and all buttons/ports remain accessible.Cradle Hardware: Includes a set of nuts and bolts to connect to the OPTIONAL RAM-B-238U diamond plate adapter.Optional Cradle Adapter: The optional RAM-B-238U is a diamond plate adapter with two pre-drilled holes (compatible with the AMPS hole pattern) that attaches to the back of the cradle. The RAM-B-238U has a 1 inch rubber ball that will connect to other RAM 1 inch socket accessories (i.e. RAM-B-201 series arm, etc).
OVERVIEWThe RAP-SB-187-GA48 consists of the RAM EZ-Strap™ base, double ball SHORT arm, diamond adapter base and high strength composite cradle. The strap can be cut to fit tubing, square rails and irregular shapes from 0.5" to 2.58" in diameter. Multiple adjustment points allow you to move the mount to your optimum viewing position. This mount rotates 180 degrees.
OVERVIEWThe RAP-SB-187-GA41 consists of the RAM EZ-Strap™ base, double ball SHORT arm, diamond adapter base and high strength composite cradle. The strap can be cut to fit tubing, square rails and irregular shapes from 0.5" to 2.58" in diameter. Multiple adjustment points allow you to move the mount to your optimum viewing position. This mount rotates 180 degrees.
The RAM-101 consists of a double socket arm and two 2.5" diameter round bases that contain the universal AMPS hole pattern. The mount is designed with a 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
OVERVIEWThe RAM-B-149Z-GA48 consists of a double socket arm, zinc coated u-bolt base, diamond adapter base and custom high strength composite cradle for the Garmin eTrex 10, 20 and 30. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the motorcycle eTrex mount to your optimum viewing position. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. Also included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".
OVERVIEWThe RAM-B-166-GA48 consists of a double socket arm, 3.3" twist lock suction cup base, diamond adapter base and custom high strength composite cradle for the Garmin eTrex 10, 20 and 30. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including adhesive disks. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the suction cup eTrex mount to your optimum viewing position.
Your motorcycle rides on rubber tires for grip and to soften the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, the turn of a single knob grips the adjustment arm to a rubber ball designed to dampen shock and vibration. With RAM products, it's all grip and no slip plus protection for your valuable electronics. Simply place our easy to install ball base onto the motorcycle handlebar top clamp and you're done. After that, a world of mounting possibilities just opened up.
The RAM-B-174U consists of a 1" diameter rubber ball, double socket arm, hardware for mounting to both brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows you to move the mount to your optimum viewing position.
The RAP-B-400-238U consists of the small Tough-Claw™ base, double socket arm and diamond base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.14" outer diameter. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
The RAP-B-121-238U, universal glare shield/yoke mount, is ideally suited for a day on the wing and yet easily removed for travel in the flight bag. Both strong and lightweight, this new clamping base is perfect for numerous electronic devices commonly found in the cockpit. Modular in design, switch out the clamps for a perfect fit no matter what the mounting surface, or add a second ball to mount another device; brilliant. Crafted to hold firm to most glare shields, yokes, or tubing, practically any aircraft can benefit from this product. Simple to use and exceptionally versatile, RAM has created another "must have" for any pilot. Once you have had a chance to use this great little device, we are confident you'll find uses for it no matter what you fly, drive, or ride. With everything you get in this package, you may even find yourself using your new RAM Mount on a golf cart, work bench, or even exercise equipment. With RAM, there are no limits. The RAP-B-121-238U fits rails or edge lips from 0.625" to a maximum of 1.25". The mounting base can also accept a second ball (RAP-B-121BBU) giving you the ultimate double ball base.
With the RAM magnifier, you won't have to lean closer or squint to see where you're at or where you're going. The magnifier is 2" x 4" with 2x zoom. The RAM magnifier adaptor quickly installs between the RAM diamond mounting base and the device cradle. The magnifying lens can be adjusted to a variety of angles to accommodate a wide variety of GPS units providing a more easily readable screen. The RAM-MAG-1 is compatible with all RAM diamond bases that contain the universal AMPS 2-hole pattern.
OVERVIEWThe RAM-B-202-G4U consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Included are 3x (#8-32 x 5/8” PH PD Mach Screws) and 3x (#8-32 SS Nylock Nuts) that will connect the RAM-202-G4U to the bottom of the Garmin echo™ and Striker™ 4 Series.
The RAM® Torque™ handlebar mounting base features a 1" B size RAM® rubber ball and is compatible with rails 3/4” to 1” in diameter. Sizing inserts are included to provide a tight fit while also protecting the mounting surface. The RAM® Torque™ mounting base also includes nylon-insert lock nuts to prevent loosening in high vibration environments.
RAM® X-Grip® telefonikinnitus koos lenksu U-poldi alusegaRAM-B-149Z-UN7U koosneb tsingitud U-poldi alusest, kahekordsest pistikupesast ja universaalsest X-Grip® hällist. Sellesse paketti kuulub riistvara, mis mahutab rööpaid läbimõõduga 0,50 tolli kuni 1,25 tolli. Alus sisaldab musti kattekorke, mis tuleb asetada U-poldi avatud otste kohale. Kinnitus on konstrueeritud RAM-i 1-tollise läbimõõduga patenteeritud kummist kuuli- ja pesasüsteemiga, millel on reguleerimispunktid kahe pesa õla mõlemas otsas; see võimaldab peaaegu lõpmatut reguleerimist ja ideaalseid vaatenurki. Kaasasolev komposiitsiine adapter võib siini kitsendada kuni minimaalne laius 0,5 tolli Kaasasoleval X-Grip® turvahällil on puhas ja nutikas nelja jalaga disain, millel on suurepärane hoidmisjõud, ilma telefoni vahtpatjade ja plasti taha peitmata. Vedruga X-Grip® turvahäll laieneb ja tõmbub kokku, võimaldades teie mobiiltelefoni täiuslikult kohandada. RAM X-Grip®, mis on täiuslik täiendus tänapäeva sõidukite moodsale elegantsele interjöörile, on mobiiltelefoni alus. X-Grip® sisaldab seadme kinnitust, mida soovitatakse kasutada välistingimustes. Häll ühildub pihuseadmetega, mis sobivad allpool loetletud mõõtmetega. Üldsuuruse määramisel on oluline kontrollida oma pihuseadme mõõtmeid ümbrise/ümbrise/nahaga.
