The RAP-B-166-2-UN7U consists of a 2.75" twist lock suction cup base, double socket system and universal spring loaded X-Grip® cradle for cell phones. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
RAM X-Grip iPhone 8 (4.7" screen) Holder with RAM Mighty-Buddy Snap Link Suction Cup Mount.The X-Grip is a spring loaded holder which allows for a perfect fit to the phone.Rubber coated tips will hold the device firm and stable.Constructed from high strength composite and stainless steel.Holder Dimensions: Minimum width 47.6mm Maximum width 82.5mm Depth 22.2mm.The suction cup base has been designed to have a strong hold on glass and non-porous plastic surfaces.Single socket technology provides multiple adjustment angles.
RAM® EZ-Strap™ siini kinnitus topeltkuuli ja teemantaluse adapterigaKui otsite paigalduslahendust, mis on kiire, lihtne ja ei märgi käepidemele, siis see on see. Ärge raisake oma aega millegi parema otsimisele, sest see on parim. RAM EZ-Strap™ paigaldatakse sekunditega ja haarab torudest, kandilistest siinidest ja ebakorrapärastest kujunditest nagu Python. See kinnituse pärl sobib ideaalselt väiksematele elektroonikaseadmetele, nagu iPod, iPhone, GPS ja muud sarnased seadmed. Kinnitage seadmed oma mootorratta, jalgratta, ATV, golfikäru ja muu külge. RAM EZ-Strap™ on äärmiselt tugev ja odav. Tõenäoliselt ostate ühe sõbrale ja mitu endale. See lisand RAM-i paigaldustoodete sarjale on kindlasti fännide lemmik.RAM EZ-Strap™ kahe kuuliga SHORT varrega saab lõigata nii, et see sobiks torude, kandiliste siinide ja ebakorrapäraste kujunditega läbimõõduga 0,5-2,58 tolli. EZ-Strap™ kinnitus kinnitub otse RAM-i kinnitusalustele, millel on teemantadapteriga sobiv avamuster. See alus pöörleb 180 kraadi.Rööpa mõõtmed:0,5" kuni 2,58"KAASAS RIISTVARA – montaažiriistvaraKLAMBRIVAHEND - 0,5" - 2,58" läbimõõtAUKUMUSTER – 2-auguline AMPS: 1,912"PALLI SUURUS – RAM Snap-Link (3/4")KAALKAALUS – 0,5 naelaMATERJALID – ülitugev komposiitPAKENDI TÜÜP - polükottKAAL - 0,2 naela.
The RAM-B-309-1CHU connects to your handlebar clutch/brake clamp, left or right side, and holds one 1" diameter mounting ball. The chrome base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-1CHU base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58". This base allows for an additional mount using the RAM® Motorcycle 1" Ball Adapter.
TOOTETEAVERAP-274-1U koosneb kahest rihmast RAM® EZ-ON/OFF™ ja pööratavast teemantadapterist. Reguleerige tõmbsidemeid erinevate siinide külge kinnitamiseks, alates läbimõõduga vähemalt 0,5 tolli. Teemantadapterile vajutades võimaldab RAM® EZ-ON/OFF™ süsteem teemantadapteri kiiret vabastamist alus. Ühendamisel saab teemantpõhi teie soovitud asendisse pöörata. Teemant-adapteril leiduv augumuster ühendatakse paljude RAM®-i komponentidega, sealhulgas tööstusstandardi AMPS-i augumustriga.RIISTVARA KAASA(1) Lame kummist vaherõngas(1) Nurga all olev kummist vaherõngas(1) 3,06-tolline kummipadi(2) 7" juhtmeköidisedKLAMBRIVAHEND - 0,5" - 1,68" läbimõõtAUKUMUSTER – 2-auguline AMPS: 1,912"MATERJALID – ülitugev komposiitPAKENDI TÜÜP - polükottKAAL - 0,11 naela.
The RAM universal spring loading clamping cradle includes side clamps with rubber bumpers that adjust accordingly to the width of your device, securing your device in the cradle. The feet at the base of the cradle can pivot and slide, creating an opening for larger devices to be attached. A release button, located on the bottom right side of the cradle, allows for quick release of your device. Also included are two threaded inserts and a set of two nuts/bolts to connect the cradle to any of the RAM compatible mounts. Primary mounting applications for the clamping cradle is in LOW VIBRATION environments including cars, trucks and fleet vehicles. Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
The RAM-B-309-2U connects to your handlebar clutch/brake clamp, left or right side, and holds two 1" diameter mounting ball. The ball that is connected between the hole centers is removable. The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-2 base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".
The RAM-B-345U brake/clutch reservoir cover ball base fits cleanly over your existing reservoir cover with the 1" rubber ball centered. Made of die cast aluminum with an overmolded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. This mount is not compatible with the 2016 BMW R1200RT.
The RAP-SB-180NBU consists of the Lil Buddy™ adhesive stick base and RAM ball that attaches to the back of the RAM-HOL-UN7U. Using an adhesive disk, put the Lil Buddy™ practically anywhere you want to keep your handheld device easy to see and always within your reach. Designed with a very small foot print, finding a home on your dash or console is easy. This mount rotates 180 degrees.
The RAM AQUA BOX® product line has been keeping mobile phones and devices safe for years. Included with the newest AQUA BOX® Pro 20 i5 is a unique patented flex lens that allows you to easily operate all the side buttons on your iPhone 5. Weather resistant, the AQUA BOX® will ensure your phone is dry and safe, even when accidently dropped into water. The optically clear membrane provides the best tactile screen operation and viewing, giving you full access to text message, listen to music, take photos or capture video. Compatible with a full line of RAM mounts, we guarantee the AQUA BOX® Pro 20 i5 to be the perfect mounting solution for your phone.
OVERVIEWThe Garmin VIRB™ is one of the most exciting Action Sports Cameras with almost unlimited capabilities and applications. Upgrade your ride with an affordable mounting solution that enables the capture of video, at the pristine time and at the best angles. With the RAM patented rubber ball and socket system easily maneuver the VIRB™ in all directions, without obstruction of your view while riding. Constructed of the finest materials, The RAM design will dampen shock and vibration; this ensuring your camera is mounted firmly, safely and solidly. When not in use quickly release your camera for relocation or stowage. Backed with a lifetime warranty, RAM provides the only accessories necessary for your complete viewing enjoyment.
The RAM® Tough-Claw™ is the perfect mounting base for toolless installation and removal on round, square, and odd-shaped rails and bars. The large version of the RAM® Tough-Claw™ can quickly be clamped on rails ranging from 1" to 2.2" in outer diameter and is ideal for mounting phones, tablets, action cameras, rod holders, and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars of bicycles and motorcycles, or even on kayak rails and roll bars, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection.
Now that you've got the right Tab for the job, you are going to need the right mounting system. Get the most out of your tablet with the Universal RAM Tab-Tite™ cradle. With 3 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
RAM® No-Drill™ Vehicle Base for '13-21 Ford Fusion + MoreRAM® No-Drill™ sülearvuti kinnitusalusel on vastupidav terasest kinnitusalus, mis on kohandatud selle sõidukiga ideaalselt sobima. Kasutades kinnituspunktidena kaassõitjapoolseid istme siini polte, kasutatakse sülearvuti kinnitusaluse kinnitamiseks sõidukisse olemasolevat riistvara.
RAM AQUA BOX® cases provide sealed enclosure and protection for your handheld devices. The clear, touch through screen allows you to view your electronics as well as use their function keys while in place. There is even a place for a small lock to serve as a theft deterrent. The AMPS hole pattern on the back of the box allows this enclosure to be attached to a multitude of RAM mounting bases and kits. Ideally suited to Motorcycles and ATV’s, keep your portable devices safe, dry, and accessible. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
RAM® palliadapter Garmin VIRB™ sukeldumisümbriseleTOOTETEAVERAM-B-202U-GA65 koosneb 1-tollisest kummikuulist, mis on ühendatud kohandatud Garmin VIRB™ DIVE Case adapteriga. Adapter kinnitatakse otse korpuse alumisele küljele, asendades tehase kinnitusklambri, muutes selle ühilduvaks kõigi 1-tollise läbimõõduga kuulliigendite ja RAM-i kinnitustega.SEADMED KAASAPaigaldusriistvaraPALLI SUURUS – suurus B (1 toll)LOAD – standardkasutus: 2 naela, raske kasutus: 1 naelMATERJALID – ülitugev komposiitPAKENDI TÜÜP - kilekottKAAL - 0,1 naela.
Get the most out of your tablet with the RAM® Tab-Tite™ spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, USB, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this RAM® product is just what you need to get the most out of your tablet. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. When purchasing a new tablet, new detachable support cups are the only components needed for purchase. Included is a set of four nuts and bolts to connect the cradle to any RAM® components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The RAM® Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
RAM® Quick-Draw™ Jr. Universal Printer HolderRAM® Quick Draw™ Jr. hoidik kasutab ainulaadset patendiootel vedruga mehhanismi, mis hoiab tugevalt, kuid pakub printeri hoiustamiseks lihtsat eemaldamist. Hällide mõlemas otsas on külgmised kinnitusplaadid, mis on konstrueeritud nii, et need sobiksid puhtalt printeri servade ümber.
RAM® Safe-N-Secure™ Locking Kit for RAM® Tough-Tray™RAM-234-LK2, Safe-n-Secure, lukustusnupu komplekt on loodud RAM-234-3 Tough-Tray™ kinnitamiseks ja kaitsmiseks. Komplekt sisaldab lukustusnuppu ja riistvara, mis muudab RAM Tough-Tray™ lukustussüsteemiks.
The RAP-B-224-1U suction cup base consists of a 3.3" diameter RAM® Twist-Lock™ suction cup that is compatible with the RAM-B-238 or RAP-B-238 diamond ball base. The RAM® Twist-Lock™ suction cup base is a fan favorite for use on vehicle windshields, and provides an extra strong hold on any smooth, nonporous surface.
The RAM-HOL-TAB19U consists of a spring loaded back plate and custom support cups for the Panasonic Toughpad FZ-G1. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB19U is just what you need to get the most out of your tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
The RAM-B-316-1-238U consists of the RAM POD I universal No-Drill™ vehicle base, 18” rigid aluminum rod, single 1" ball socket arm and diamond base adapter. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The RAM POD I will hold everything you need safely and securely. The diamond adapter base consists of a 1" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base. The base has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles.
The RAP-394-SSBMPU consists of the Tough-Tube™ fishing rod holder, 2" long ratchet spline post arm and combination/bulkhead/flat surface mounting base. The ratcheting feature allows for the tube to tilt forward and back 180 degrees for optimum viewing angles. The combination bulkhead/flat surface mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the release of a plunger to remove the rod holder. Ideally suited for anything from Kayaks to Tournament boats, this compact and simple design is ready for your next day on the water.
The RAM-HOL-GA38U consists of a high strength composite cradle and hole pattern that will allow the attachment to all RAM components or mounts that contain the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your GPS and become the most useful accessory in your vehicle. Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
The RAP-119NBU consists of the RAM-TUBE™ 2008 fishing rod holder and single open socket for 1.5" RAM rubber ball bases. Offering the patented RAM rubber ball and socket feature, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. The RAM-TUBE™ 2008 tube holder integrates the patented rubber ball and socket design with a self draining and quick to access tube for the butt of most any fishing rod. The tube is made of extremely durable composite. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water.
The RAP-370-RBU consists of the RAM ROD® Light-Speed™ fishing rod holder, RAM ROD® Revolution ratchet arm with single open socket and 2.5" diameter round base that contains the universal AMPS hole pattern. Offering the patented RAM rubber ball, socket and ratcheting feature, you can rotate the rod holder 360 degrees, while tilting the rod holder forward and back for the optimum fishing angle. . The RAM ROD® Light-Speed™ is another innovative product in RAM’s long list of high quality, industry leading fishing products. Ideally suited for spinning reels and bait casting reels, the Light-Speed rod holder provides smooth action when inserting and removing the fishing rod, yet holds firm in rough water or while trolling. The spring loaded design enables rapid removal of the rod and reel when a fish is on, and offers easy placement of the rod in the rod holder.
A favorite world wide, the RAM Level Cup™ Self-Leveling Drink Holder will bring a smile to anyone’s face when they get it. The perfect accessory for any vehicle including motorcycles, ATV’s, Big Rigs, and yes, even your prized riding lawn mower. Easily installed and positions to keep your favorite beverage within reach, this gem even comes with a RAM can insulator. Take a corner as hard as you like, this holder is ready to ride. The integrated eyelet and hook provide an optional tethering function, securing any small or open container in any harsh environment. Compatible with any cups, cans, bottles or mugs ranging from 2.5” to 3.5” diameter.
RAM Twist and Tilt™ mount for motorcycle handlebar or mirror bracket attachment. Simply choose your preferred mounting location and the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. The versatile mounting base in this kit pivots up, down, left and right affording you the ultimate in adjustability. With a turn of a single comfortable to grasp knob, viewing adjustments can be made and the sleek hourglass shape of the arm assembly compliments the lines of any motorcycle. High quality materials insure your electronic device is safe, secure, and within easy reach. RAM’s patented design also dampens shock and vibration helping to extend the life of your mobile device.
The RAP-370-BU consists of the RAM ROD® Light-Speed™ fishing rod holder, 4" long spline post and combination bulkhead/flat surface base with plunger for spline posts. Designed to mount vertically or horizontally in your boat, you can rotate the rod holder 360 degrees, while tilting the rod holder forward and back for the optimum fishing angle. The RAM ROD® Light-Speed™ is another innovative product in RAM’s long list of high quality, industry leading fishing products. Ideally suited for spinning reels and bait casting reels, the Light-Speed rod holder provides smooth action when inserting and removing the fishing rod, yet holds firm in rough water or while trolling. The spring loaded design enables rapid removal of the rod and reel when a fish is on, and offers easy placement of the rod in the rod holder. The combination bulkhead/flat surface mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the release of a plunger to remove the rod holder.
The RAM-HOL-SAM5U consists of a high strength composite cradle and hole pattern that will allow the attachment to all RAM® components or mounts that contain the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your tablet and become the most useful accessory in your vehicle. Included is a set of four nuts and bolts to connect the cradle to any RAM® components or mounts that contain the universal AMPs hole pattern.
The RAM-B-202AU, universal camera and camcorder base, consists of a 1" diameter rubber ball, connected to a 2.5" diameter round plate with 1/4"-20 camera thread. The round plate provides extra support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras.
The RAM-HOL-AP19 consists of a high strength composite cradle and hole pattern that will allow the attachment to all RAM components or mounts that contain the universal 2-hole AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPhone 6 Plus, 6s Plus and 7 Plus to become the most useful accessory in your vehicle. Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
Get the most out of your tablet with the RAM Tab-Tite™ universal clamping cradle. With 2 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
RAM® Twist and Tilt™ mootorratta peegli pallialusTOOTETEAVERAM pakub laias valikus mootorratta kinnitusi. Suurepärane uus täiendus sellele niigi ulatuslikule tootesarjale on meie uus Twist and Tilt™ alus. Valmistatud survevalualumiiniumist, vastupidavus ei valmista muret. Patenteeritud kummikuul summutab lööke ja vibratsiooni, aidates säilitada paigaldatud seadme jõudlust. Lihtne kasutada ja paigaldada, see suurepärane väike toode ühildub paljude 1-tolliste kuulkinnitussüsteemidega. Kompaktne ja diskreetne Twist and Turn™ ei võta palju ruumi, kuid pakub palju paigaldusvõimalusi.RIISTVARA KAASA(1) M10-1,25 x 40 mm pistikupeaga kruvi(1) M8-1,25 x 40 mm pistikupeaga kruvi(2) M10-1,25 kuuskantmutrid(2) M8-1,25 kuuskantmutrid(1) M10-1,25 x 20 mm pesapeaga kruvi(1) M8-1,25 x 20 mm pistikupeaga kruvi(3) M10 hambaluku seibidPALLI SUURUS – B-suurus (1")KAALUKOHUTUSStandardkasutus: 2 naelaRaskeveokite kasutamine: 1 naelMATERJALID – merealumiiniumPAKENDI TÜÜP - polükottKAAL - 0,55 naela.LISAINFORMATSIOONEi soovita ega soovitata kasutajatel eemaldada kõik olemasolevad roostevabast terasest kruvid ja asendada need Twist and Tilt RAM Mount aluse vastu. Selle näiteks on juhtraua kinnitusklamber või muud olulised kinnitusdetailid, mis hoiavad koos olulisi konstruktsioonikomponente.
FEATURES14" long PVC extension pipe with single sided B size socket arms for extending the length of your mountCompatible with B size ball bases; ball and socket technology allows for near-infinite adjustabilityMade of high-strength composites for durability and reliability in the most demanding environmentsBacked by a lifetime warranty
The RAP-114-P6U consists of a 6" long spline post, ratchet connector with male teeth and knob. The ratcheting feature allows for the connecting rod holder to tilt forward and back for optimum angles. Compatible with an assortment of RAM spline post bases, the RAP-114-P6U can quickly be removed and repositioned.
The IntelliSkin® is a protective sleeve with GDS® connection for the Samsung Galaxy S6. The IntelliSkin® features an integrated connector which is molded directly into the skin. This prevents damage to the connector on your device from repetitious docking and un-docking. On the exterior of the skin are molded ruggedized docking contacts designed for repetitive docking and undocking common in field applications. IntelliSkin® offers a GDS® connection to any GDS® dock for port replication and charging.
RAM® ühe pistikupesa õlg 1/4" NPT keermestatud augugaTOOTETEAVERAM-B-200-1U sisaldab ühte pesa, mis mahutab B suuruse 1" kuulkomponente ja 1/4" NPT sisekeere. See osa ühendatakse 1/4" NPT väliskeermetega, sealhulgas RAM-PA854XX NPT torudega.PALLI SUURUS – B-suurus (1")KAALUKOHUTUSStandardkasutus: 2 naelaRaskeveokite kasutamine: 1 naelMATERJALID – merealumiiniumPAKENDI TÜÜP - polükottKAAL - 0,22 naela.
RAM® palliadapter AMPS-plaadiga Garmin GPSMAP 620 ja 640 jaoksTOOTETEAVERAM-B-347-G4 alus koosneb 1" läbimõõduga kummikuulist, mis on ühendatud täisnurga all 2" x 1,7" ruudukujulise alusega. Aluse igas nurgas on neli eelpuuritud auku, mis teeb universaalsest 1,5 x 1,188 ( aukude vahe) AMPS augu muster.RIISTVARA KAASA(3) #8-32 x 5/8" masinakruvid(3) #8-32 Nylock MutridAUUKUSTER4 auguga AMPS: 1,181 x 1,496 tolliPALLI SUURUS – B-suurus (1")KAALUKOHUTUSStandardkasutus: 2 naelaRaskeveokite kasutamine: 1 naelMATERJALID – merealumiiniumPAKENDI TÜÜP - polükottKAAL - 0,15 naela.
The RAM-231U-AC1 is a 1.5" diameter C-size ball with handlebar clamp base. No hardware is included with this sku. If you need the installation hardware as well please take a look at RAM-231ZU.
The RAP-B-365-224-1U, triple suction cup base, consists of a 1" ball base connected to a high strength composite base with three 3.3" diameter suction cup bases at each end. This base has a suction grip, allowing for the connection with 1" double socket arms to any non-porous surface, like a windshield, with confidence.
The RAP-B-379U-252025 consists of a 1" diameter rubber ball connected to a 1/4"-20 x .25" male threaded post. The male thread matches most standard camera and camcorder female threads found on the bottom of these devices.
OVERVIEWThe RAM-B-149Z-GA31U consists of a zinc coated u-bolt base, double socket arm and high strength composite cradle. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. The base includes black cover caps to be placed over the exposed ends of the u-bolt. The included composite rail adapter can narrow the rail to a minimum width of 0.5". The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
The RAM-B-149Z-GA41U consists of a zinc-coated U-bolt base, medium length double socket arm, and high-strength composite cradle with diamond ball base. Included in this kit is hardware that will accommodate rails from 0.5" to 1.25" in diameter. The base includes black cover caps to be placed over the exposed ends of the U-bolt. The included composite rail adapter can narrow the rail to a minimum width of 0.5". The mount is designed with a B size 1" rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for near-infinite adjustability and ideal viewing angles.
OVERVIEWThe RAM-B-149Z-GA46 consists of a zinc coated u-bolt base, double socket arm and high strength composite cradle. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. The base includes black cover caps to be placed over the exposed ends of the u-bolt. The included composite rail adapter can narrow the rail to a minimum width of 0.5". The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
RAM® suction cups are regarded as one of the most impressive suction cups in the world. Their incredible holding power is surprising when considering how most suction cups function. When two suction cups are used together the performance is amazing. The RAM® Dual Articulating Suction Cup is an amazing innovation in suction cup mounting. With the ability to independently articulate each suction cup, this mounting base can be used in a variety of applications such as curved windows and surfaces. Whether you are mounting to a curved surface on a vehicle, or a curved windshield, this product is the ideal solution for secure suction cup mounting.
