OVERVIEWThe RAP-SB-187-GA48 consists of the RAM EZ-Strap™ base, double ball SHORT arm, diamond adapter base and high strength composite cradle. The strap can be cut to fit tubing, square rails and irregular shapes from 0.5" to 2.58" in diameter. Multiple adjustment points allow you to move the mount to your optimum viewing position. This mount rotates 180 degrees.
OVERVIEWThe RAP-SB-187-GA41 consists of the RAM EZ-Strap™ base, double ball SHORT arm, diamond adapter base and high strength composite cradle. The strap can be cut to fit tubing, square rails and irregular shapes from 0.5" to 2.58" in diameter. Multiple adjustment points allow you to move the mount to your optimum viewing position. This mount rotates 180 degrees.
RAM-HOL-MA10U Features:Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.Cradle Material: Black high strength composite.Cradle Hole Pattern: The back of the cradle has two pre-drilled holes compatible with the AMPS hole pattern (1.912 inches from center hole to center hole).Cradle Description: Place the top of the electronic device into the cradle, and then push the base into the expandable arms at the bottom of the cradle. The arms will then snap into place when the electronic device is completely secured in the cradle. The cradle allows all cables (NOT INCLUDED) to stay connected and all buttons/ports remain accessible.Cradle Hardware: Includes a set of nuts and bolts to connect to the OPTIONAL RAM-B-238U diamond plate adapter.Optional Cradle Adapter: The optional RAM-B-238U is a diamond plate adapter with two pre-drilled holes (compatible with the AMPS hole pattern) that attaches to the back of the cradle. The RAM-B-238U has a 1 inch rubber ball that will connect to other RAM 1 inch socket accessories (i.e. RAM-B-201 series arm, etc).
OVERVIEWThe RAM-B-149Z-GA48 consists of a double socket arm, zinc coated u-bolt base, diamond adapter base and custom high strength composite cradle for the Garmin eTrex 10, 20 and 30. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the motorcycle eTrex mount to your optimum viewing position. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. Also included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".
The RAM-101 consists of a double socket arm and two 2.5" diameter round bases that contain the universal AMPS hole pattern. The mount is designed with a 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
OVERVIEWThe RAM-B-166-GA48 consists of a double socket arm, 3.3" twist lock suction cup base, diamond adapter base and custom high strength composite cradle for the Garmin eTrex 10, 20 and 30. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including adhesive disks. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the suction cup eTrex mount to your optimum viewing position.
Your motorcycle rides on rubber tires for grip and to soften the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, the turn of a single knob grips the adjustment arm to a rubber ball designed to dampen shock and vibration. With RAM products, it's all grip and no slip plus protection for your valuable electronics. Simply place our easy to install ball base onto the motorcycle handlebar top clamp and you're done. After that, a world of mounting possibilities just opened up.
The RAM-B-174U consists of a 1" diameter rubber ball, double socket arm, hardware for mounting to both brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows you to move the mount to your optimum viewing position.
With the RAM magnifier, you won't have to lean closer or squint to see where you're at or where you're going. The magnifier is 2" x 4" with 2x zoom. The RAM magnifier adaptor quickly installs between the RAM diamond mounting base and the device cradle. The magnifying lens can be adjusted to a variety of angles to accommodate a wide variety of GPS units providing a more easily readable screen. The RAM-MAG-1 is compatible with all RAM diamond bases that contain the universal AMPS 2-hole pattern.
The RAP-B-400-238U consists of the small Tough-Claw™ base, double socket arm and diamond base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.14" outer diameter. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
The RAP-B-121-238U, universal glare shield/yoke mount, is ideally suited for a day on the wing and yet easily removed for travel in the flight bag. Both strong and lightweight, this new clamping base is perfect for numerous electronic devices commonly found in the cockpit. Modular in design, switch out the clamps for a perfect fit no matter what the mounting surface, or add a second ball to mount another device; brilliant. Crafted to hold firm to most glare shields, yokes, or tubing, practically any aircraft can benefit from this product. Simple to use and exceptionally versatile, RAM has created another "must have" for any pilot. Once you have had a chance to use this great little device, we are confident you'll find uses for it no matter what you fly, drive, or ride. With everything you get in this package, you may even find yourself using your new RAM Mount on a golf cart, work bench, or even exercise equipment. With RAM, there are no limits. The RAP-B-121-238U fits rails or edge lips from 0.625" to a maximum of 1.25". The mounting base can also accept a second ball (RAP-B-121BBU) giving you the ultimate double ball base.
OVERVIEWThe RAM-B-202-G4U consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Included are 3x (#8-32 x 5/8” PH PD Mach Screws) and 3x (#8-32 SS Nylock Nuts) that will connect the RAM-202-G4U to the bottom of the Garmin echo™ and Striker™ 4 Series.
The RAM® Torque™ handlebar mounting base features a 1" B size RAM® rubber ball and is compatible with rails 3/4” to 1” in diameter. Sizing inserts are included to provide a tight fit while also protecting the mounting surface. The RAM® Torque™ mounting base also includes nylon-insert lock nuts to prevent loosening in high vibration environments.
The RAM-117BU consists of the RAM ROD® 2000 fishing rod holder and patented 1.5" diameter rubber ball. With the combination of the patented RAM rubber ball and socket system you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle.
This RAM-103U-B-2461 consists of a 1.5" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern and SHORT length double socket arm. The rubber ball is positioned 0.88" from the center of one edge. The double socket arm will attach to all RAM 1.5" dia. ball bases.
• The u-bolt base makes attaching to handlebars, tubing, or railing a breeze• Simple to install and easy to use, the possibilities become endless• Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles• High quality materials insure your device is safe, secure, and within easy reach• Ram Mount's patented design also dampens shock and vibration helping to extend the life of your mobile device• Included in this package is hardware that accommodates rails from 1/2" to 1.1/4" in diameter
OVERVIEWThe RAM-HOL-GA50U consists of a high strength composite cradle and hole pattern that will allow the attachment to all RAM components or mounts that contain the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your GPS and become the most useful accessory in your vehicle. Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" to 1.6" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
The RAM-201MU-D, LONG length double socket arm with metal knob, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 9.125" Socket-To-Socket Length: 8"
The RAP-SB-224-2-UN7U consists of a snap link, 2.75" diameter twist lock suction cup base and universal spring loaded X-Grip® cradle for cell phones. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including adhesive disks. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. Combine RAM single socket technology for adjustment and the holding power of a twist lock suction cup and you've got a mount ready for the road and whatever vehicle you want to drive today. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Attach the RAM® double ball base to the brake/clutch handlebar control bracket and the mounting possibilities become endless. Rubber ball and socket technology allows for near-infinite adjustability and ideal viewing angles, while providing shock and vibration damping to help extend the life of your favorite devices. The brake/clutch double ball base fits the control clamps on your motorcycle with the included 40mm x 6mm stainless steel hardware. The two B size 1" rubber balls are permanently connected.
The RAP-B-202-GOP1 consists of a 1″ diameter rubber ball, connected to a custom GoPro® adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket.
The RAM-B-202-GOP1-201U consists of a 1" diameter standard length double socket arm and 1" diameter ball with custom GoPro® Hero adapter. The GoPro® Hero adapter attaches directly to the underside of the camera, replacing the factory mounting bracket.
The RAM-B-149Z-A-GOP1 consists of a zinc coated u-bolt base, SHORT size double socket arm and 1" diameter ball with custom GoPro Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter.
If you are looking for a mounting solution that is fast, simple, and won't mark up your handle bar, this is it. Don't waste your time looking for something better because this is the best. The RAM EZ-Strap™ installs in seconds and grips tubing, square rails and irregular shapes like a Python. This gem of a mount is ideally suited for smaller electronic devices like the Garmin nuvi, and other similar devices. Attach devices to your motorcycle, bicycle, atv, golf cart and more. The RAM EZ-Strap™ is extremely strong and low cost. The RAM EZ-Strap™, with RAM-to-RAM SHORT double ball, can be cut to fit tubing, square rails and irregular shapes from 0.5" to 2.58" in diameter. The EZ-Strap™ will attach to the RAP-SB-238FU, creating a mounting point for your cradle. The overall length of the SHORT arm adapter is 1.43". This mount rotates 180 degrees.
RAM® X-Grip® Phone Mount with RAM® Twist-Lock™ Low Profile Suction BaseRAP-B-166-2-UN7U koosneb 2,75-tollisest keerdlukuga iminapa alusest, kahekordsest pistikupesa süsteemist ja universaalsest vedruga X-Grip® hällist mobiiltelefonidele. Iminapp ja keerdlukuga alus on loodud tugevaks. hoidke klaas- ja mittepoorsetel plastpindadel, sealhulgas kleepuvatel ketastel. Kinnitus on konstrueeritud RAM 1" läbimõõduga patenteeritud kummist kuuli- ja pesasüsteemiga, millel on reguleerimispunktid kahekordse pesa varre mõlemas otsas; see võimaldab peaaegu lõpmatut reguleerimist ja täiuslikke vaatenurki. Kaasasoleval X-Grip® turvahällil on puhas ja nutikas nelja jalaga disain, millel on suurepärane hoidmisjõud, ilma telefoni vahtpatjade ja plasti taha peitmata. Vedruga X-Grip® turvahäll laieneb ja tõmbub kokku, võimaldades teie mobiiltelefoni täiuslikult kohandada. RAM X-Grip®, mis on täiuslik täiendus tänapäeva sõidukite moodsale elegantsele interjöörile, on mobiiltelefoni alus.X-Grip® sisaldab seadme kinnitust, mida soovitatakse kasutada välistingimustes. Häll ühildub pihuseadmetega, mis sobivad allpool loetletud mõõtmetega. Üldsuuruse määramisel on oluline kontrollida oma pihuseadme mõõtmeid ümbrise/ümbrise/nahaga.
The RAP-SB-180-UN7 consists of the RAM Lil' Buddy™ and universal X-Grip® cradle. Minimalist in design yet incredibly useful is the RAM Lil' Buddy™ mount. Using an adhesive disk, put the Lil' Buddy™ practically anywhere you want to keep your device easy to see and always within your reach. Designed with a very small foot print, finding a home on your dash or console is easy. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions Minimum Width = 1.875" (Minimum Height = 4.25") Maximum Width = 3.25" (Minimum Height = 2.25") Depth = 0.875"
RAM® X-Grip® Large Phone Mount with Brake/Clutch Reservoir BaseRAM-B-174-UN10 koosneb riistvarast, mis on ette nähtud paigaldamiseks kas piduri/siduri reservuaaridele ja siinidele, mille läbimõõt on 0,5" kuni 1,25", kahe pistikupesa hoovast ja universaalsest X-Grip® suurest telefoni-/phabletihoidikust. Kinnitusse on kavandatud 1-tollise läbimõõduga patenteeritud kummist kuuli- ja pesasüsteem, mille reguleerimispunktid on pistikupesa mõlemas otsas; see võimaldab hoova nupu keeramisega liigutada X-Grip®-i kinnituse optimaalsesse vaatamisasendisse. . Piduri-/siduripaakide kinnitusriistvara sisaldab nii standardseid kui ka metrilisi kinnituspolte. Kaasasoleval X-Grip®-i hoidikul on puhas ja nutikas nelja jalaga disain, millel on suurepärane hoidmisjõud, ilma telefoni vahtpatjade ja plasti taha peitmata. Vedruga X-Grip® hoidik laieneb ja tõmbub kokku, võimaldades teie mobiiltelefoni täiuslikku kohandamist. Tänapäeva sõidukite moodsa elegantse interjööri täiuslikuks täienduseks on RAM X-Grip®, mis on edasi arendatud mobiiltelefoni hoidik. X-Grip® sisaldab välitingimustes kasutamiseks soovitatavat seadme kinnitust. Häll ühildub pihuseadmetega, mis sobivad allpool loetletud mõõtmetega. T määramisel on oluline kontrollida oma pihuseadme mõõtmeid ümbrise/ümbrise/kestaga ta üldine suurus.LISAINFORMATSIOONKokkupuude vibratsiooniga, nagu suure võimsusega mootorrattamootorite tekitatud vibratsioon, võib mõjutada iPhone'i kaameraid.
The RAP-B-400-GOP1U consists of the small Tough-Claw™ base, double socket arm and B size 1" diameter ball with custom GoPro®/Action Camera adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.14" outer diameter. The GoPro®/Action Camera adapter attaches directly to the underside of the camera, replacing the factory mounting bracket.
The RAP-B-166-GOP1 consists of a 3.3" diameter suction cup twist lock base, double socket arm and 1" diameter ball with custom GoPro® Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including adhesive disks. The GoPro® Hero adapter attaches directly to the underside of the camera, replacing the factory mounting bracket.
The RAP-B-378-202U-GOP1 consists of 2.5" flex adhesive base, double socket arm and custom GoPro® Hero adapter. Using the included PSA stick pad, put the flex adhesive mount practically anywhere you want to keep your handheld device easy to see and always within your reach. Designed with a very small foot print, finding a home on your scooter, motorcycle, kayak, boat or vehicle dash is easy. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The GoPro® Hero adapter attaches directly to the underside of the camera, replacing the factory mounting bracket.
The RAM-B-166-A-GOP1U consists of a 3.3" diameter suction cup twist lock base, SHORT length double socket arm and 1" diameter ball with custom GoPro® Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including adhesive disks. The GoPro® Hero adapter attaches directly to the underside of the camera, replacing the factory mounting bracket.
The RAM-B-166-A-GOP1U consists of a 3.3" diameter suction cup twist lock base, SHORT length double socket arm and 1" diameter ball with custom GoPro® Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including adhesive disks. The GoPro® Hero adapter attaches directly to the underside of the camera, replacing the factory mounting bracket.
The RAP-107U consists of a composite 2.5" diameter round base with the universal AMPS hole pattern, composite double socket arm, and connecting Humminbird/Apelco marine adapter base. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; thus allowing for almost infinite adjustment and perfect viewing angles.
For anyone who needs more versatility from their GoPro® mounting solution, look no further than the RAM Adapter for GoPro Bases. Utilizing the RAM ball and socket mounting system, simply attach the included B Size 1” ball to the base for enhanced adaptability and superior vibration damping– letting you get the most out of your GoPro. This kit includes a short arm and two-pronged universal action camera for even greater versatility, allowing for an easily adjustable 360-degree rotation of your camera.
The RAM-B-349U includes a M10 x 1.25 pitch male thread connected to a 1" rubber ball. The threaded hole must contain the following dimensions for this base to fit: M10 1.25 pitch with a 14.5mm flange diameter with a 10.15mm thread length.
Introducing the new RAM Tough-Ball™. Why call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility and steel durability allows for a multitude of real world, and out of this world, applications. With so many of the things we use incorporating threads and fasteners, there really is no limit to the number of uses you'll find for the RAM Tough-Ball™. The RAP-379U-252062 consists of a 1.5" diameter rubber ball, connected to a 1/4"-20 X .625" male threaded post. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera.
The RAM combination handlebar and brake/clutch reservoir mount provides the ultimate flexibility for mounting to your motorcycle. Mount to either your handlebar or brake/clutch, almost infinite adjustment and perfect viewing angles are provided in this kit. RAM’s patented design also dampens shock and vibration helping to extend the life of your mobile device. This product can mount to both the brake/clutch reservoir or any round rail that is 0.5" to 1.25" in diameter. To see if the base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".
The RAM-111 consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, STANDARD LENGTH double socket arm and 6.25" x 2" rectangle base. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Overall Length: 7.35" Weight Capacity: Up to 10 lbs.
The spring loaded cradle for the Panasonic Toughpad™ FZ-A1 is durable and allows for easy removal or insertion of your tablet. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. With a full complement of compatible mounts, you are sure to find the perfect solution for all your mobile needs. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
The RAM RAM-B-125BU, curved extension base includes a 1" rubber ball; it allows for almost infinite adjustment and perfect viewing angles. Originally designed to position your GPS in front of the yoke on your plane, the extension plate can also be used in many other applications. The mounting section of the plate is 2.5" square, predrilled holes for many different screw hole patterns, including the universal AMPS hole pattern and all RAM made cradles. The connection section extends approximately 2.25" forward, at a 45 degree angle, from the center of the 1" ball and approximately 1.5" above the 1" ball (to the bottom of the connection section of the plate).
The RAM® EZ-Roll’r™ cradle for the iPad mini, iPad mini 2, and iPad mini 3 secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM® EZ-Roll’r™ cradle also features two attachment points on the back to attach a RAM® round ball base.
The RAP-B-379U-252062 consists of a 1" diameter rubber ball, connected to a 1/4"-20 X .625" male threaded post. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera.
