The spring loaded Tab-Lock™ cradle for the Panasonic Toughpad™ FZ-A1 is durable and provides loads of security. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. If security is a priority, the RAM Tab-Lock™ is a rock solid cradle that is sure to make most would-be thieves think twice about trying to steal your tablet. With a full complement of compatible mounts, you are sure to find the perfect solution for all your mobile needs. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. The Tab-Lock™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Product consists of holder only. Case not included.
The RAM® Tough-Claw™ is the ideal solution for mounting your OtterBox uniVERSE-protected iPhone or Samsung Galaxy S7/S8 to seat posts, handlebars and more. Without the need for any tools, this ball and socket mounting system offers vibration reduction and the ability to easily adjust for the perfect viewing angle. Combining protection and versatility, the RAM® Tough-Claw™ can clamp onto round, square and odd-shaped rails and bars while fitting all OtterBox uniVERSE phone cases.
The RAM-D-115BU, universal mounting plate, consists of a 2.25" diameter rubber ball, connected at right angles to a flat 6.25" x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices.
The RAM-B-111U consists of a medium double socket arm, 2.5" diameter round base, and 6.25" x 2" rectangle base. The round base includes a 1" B size rubber ball and contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle base also includes a 1" B size rubber ball and contains a variety of pre-drilled holes that are compatible with several marine electronic devices, including fishfinders and chartplotters.
The spring loaded Tab-Lock™ cradle for the Panasonic Toughpad™ FZ-A1 is durable and provides loads of security. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. If security is a priority, the RAM Tab-Lock™ is a rock solid cradle that is sure to make most would-be thieves think twice about trying to steal your tablet. With a full complement of compatible mounts, you are sure to find the perfect solution for all your mobile needs. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet.
Complete your in-vehicle mobile office setup with the GDS Keyboard with 10-Key Numeric Pad from RAM MOUNTS. Featuring wired USB connectivity and compatibility with MAC and PC computers, the keyboard has a backlight keypad with red illumination to reduce eye strain. The keyboards' AMPS and VESA mounting hole patterns allow you to mount it with a wide variety of mounting components. Also featured are two built-in slots, allowing you to mount the keyboard to a separately available Tab-Tite or Tab-Lock dock when on the go.
Complete your in-vehicle mobile office setup with the GDS Keyboard with 101 Keys & Track Pad from RAM MOUNTS. Featuring wired USB connectivity and compatibility with MAC and PC computers, the keyboard has a backlight keypad with red illumination to reduce eye strain. The keyboards' AMPS and VESA mounting hole patterns allow you to mount it with a wide variety of mounting components. Also featured are two built-in slots, allowing you to mount the keyboard to a separately available Tab-Tite or Tab-Lock dock when on the go.
The RAM-B-224U includes a 4" diameter Rubber Suction Cup base has a 1.0" diameter Rubber Ball connected at right angles. The suction cup is designed to hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass surface.
The RAM-D-111B-IN1U is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
FEATURESSpine mount adapter for Garmin handheld devicesCompatible with diamond ball bases for attaching a double socket arm; ball and socket technology allows for near-infinite adjustabilityMade of high-strength composites for durability and reliability in the most demanding environmentsBacked by a lifetime warranty
Get the perfect shot from your action camera when you're out on the water with the Tough-Pole™. This kit consists of a 1.5" short double socket arm, 12" PVC pipe, B size short arm at the top and universal action camera adapter. The various ball and socket components allow you to adjust your mount at virtually any angle, and offer the ability to collapse and stow away when not in use. Any action camera with a two-pronged attachment (including GoPro®) will work with the action camera adapter, and the bottom socket can attach to any RAM 1.5" ball base.
Ideal for vehicle windshields, the RAP-B-166-2-A-UN7U consists of a 2.75" diameter low-profile RAM® Twist-Lock™ suction cup base, short length double socket arm, and the popular spring-loaded RAM® X-Grip® phone holder. The RAM® X-Grip® features an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Made of high-strength composite and stainless steel, this version of the RAM® X-Grip® fits phones ranging from 1.87" to 3.25" in width and keeps your device completely functional and accessible. RAM® ball and socket technology allows for near-infinite adjustability to achieve the ideal viewing angle – while also extending the life of your phone by providing shock and vibration damping. For outdoor applications, the RAM® X-Grip® includes a device tether that is recommended for added security and peace of mind.
The RAM-B-174-A-UN7 consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter, short length double socket arm and universal X-Grip® cell phone cradle. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows you to move the X-Grip® mount to your optimum viewing position. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
The RAM-GDS-DOCKT-SAM29U includes the top docking cup and necessary hardware for converting your existing GDS® Vechicle Dock to support the Samsung Galaxy Tab Active2 with IntelliSkin®. Without having to purchase a brand new vehicle dock, this top cup allows you to modify your existing dock to work with your new IntelliSkin® device. The modularity of the Tab-Tite™, Tab-Lock™, and GDS® Vehicle Docks will always provide the highest quality and most cost-effective solutions for any tablet you own, including any future upgrade tablets.
The RAM ROD® 2007 Fly Rod Jr. holder is one of the most popular rod holders for the kayak angler due to its simplicity and adjustability. Utilizing the RAM patented 1.5” ball, you can rotate and adjust the rod holder almost infinitely making this rod holder ideal for kayak fishing. This rod holder is designed for use with fly rods and reels. The ball and socket enable fine adjustment without the need to loosen a knob which is ideal for making small adjustments as your fishing scenario changes throughout the day. Includes 1.5" ball with a 2" X 2.5" flat surface mounting base.
The RAM-114-BU, high strength composite fishing rod holder with bulkhead base, is a must have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle.
The RAP-201U-B, short double socket arm, has a socket at both ends that accommodates 1.5" ball bases. This socket technology allows for almost infinite adjustment and perfect viewing angles.
The RAM-101U-247-25 consists of a 6 inch double socket arm, round 2.5" diameter round base with the universal AMPS hole pattern and 2.5" clamp base. The clamp base will wrap around a maximum width of 2.5" and is tightened by screwing the two plates together with the included nuts and bolts. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles.
The metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".
Looking to mount to a metal surface? The RAM® Tough-Mag™ 88mm diameter base is the powerful and durable solution you’ve been searching for. With a B size ball screwed into a ¼-20” threaded post, simply attach a compatible double socket arm and your desired RAM® device holder. This base features an industrial-strength N35 grade magnet and rubber coating that protects the metal surface you’re attaching the RAM® Tough-Mag™ to.
The new RAM Multi-Pad™ is the perfect product to keep your busy life organized. Easily mounted in a variety of locations and ideal for your car, truck, or plane, the RAM Multi-Pad™ has many features you'd expect and others that will surprise you. With RAM in the name, you know the RAM Multi-Pad™ can be easily attached to a wide variety of RAM mounting solutions. With several mounting points and integrated magnets for holding your ferrous metal pen securely without the need for clips, the RAM Multi-Pad™ is ready to get to work for you. Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
The RAM-B-189-TAB8U consists of a double 3.3" twist lock suction cup base, double socket arm, round base adapter and Tab-Tite™ universal clamping cradle. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included Tab-Tite™ cradle includes a spring loaded back plate and custom support cups for 10" screen tablets WITH heavy duty cases. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Looking to mount to a metal surface? The RAM® Tough-Mag™ 66mm diameter base is the powerful and durable solution you've been searching for. With a B size ball screwed into a ¼-20” threaded post, simply attach a compatible double socket arm and your desired RAM® device holder. This base features an industrial-strength N35 grade magnet and rubber coating that protects the metal surface you're attaching the RAM® Tough-Mag™ to.
The RAM-D-201U-C-MI1, short double socket arm with jam nut, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
This kit contains a drill-down horizontal base, a 6 inch swing arm with an open end that will accommodate any of our 1.5 inch ball bases like RAM-202U or RAM-111BU.
The RAM® EZ-Roll’r™ cradle for the iPad Pro 12.9” 3rd Gen secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM® EZ-Roll’r™ cradle also features three attachment points on the back to attach a RAM® round ball base. An attachment point on the side of the cradle allows for the placement and removal of the Apple Pencil.
The RAM® Tough-Charge™ with X-Grip® Technology is the world's first patented, universal waterproof wireless charging cradle for phones. Designed with spring-loaded RAM® X-Grip® Technology, this cradle features an 'X' design that expands and contracts to secure nearly any phone while taking advantage of Qi compatible wireless phone charging. All four arms feature rubber-coated caps that hold your phone firmly in place, and the open design keeps buttons and switches accessible on the sides of phones. To insert your device, simply squeeze the arms on one side of the cradle and place your phone inside before releasing the arms. This Qi compatible wireless charging cradle ensures your compatible phone charges no matter what position it’s placed at. For added security and peace of mind, a device tether is included that’s recommended for outdoor applications. In addition, a support leg can be adjusted to the ideal position or removed altogether. This RAM® Tough-Charge™ with X-Grip® Technology wireless charging kit for vehicles includes a B size diamond base featuring a 1” rubber ball – perfect for attaching to your choice of B size RAM® double socket arm. The connected Type-A male pigtail connector features an in-line switch that allows you to turn off the wireless charging module when not in use. For in-vehicle charging, attach the pigtail to the included 1.2m Type-A male to Type-A female extension cable.
Keep your phone easily visible as you drive with the RAM Quick-Grip Waterproof Suction Cup Mount & Wireless Smartphone Holder from RAM MOUNTS. An ideal solution for turn-by-turn GPS navigation, this mount uses a RAM Twist-Lock suction cup to secure itself to the inside of your windshield, making it compatible with any make and model. The included medium length double socket arm connects in between the mount arm and phone holder via 1" ball connections. Your phone rests securely in the holder using RAM's Quick-Grip Technology.
The RAM-B-201U-C-ALA1, LONG length double socket arm with retention knob, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. The knob extension allows for easy adjustment of the mount and prevents over loosening of the knob. This socket technology allows for almost infinite adjustment and perfect viewing angles.
The Center Loader allows for the connection of two Extruded Aluminum Tough-Track™ systems in a straight line and provides a loading point to insert track bases. Hardware not included.
Available in lengths ranging from 4" to 30", the RAM® Hand-Track™ is an ideal track and handrail solution for ATVs, boats, kayaks and more. Compatible with all RAM track mounts, the Hand-Track includes two top-loading end caps for attaching to a flat surface. To combine multiple tracks, pair with any top-loading Hand-Track Extension with Center Connector.
Combine multiple tracks with the RAM® Hand-Track™ with Center Connector kit. Included is one Hand-Track and one top-loading Center Connector, with the Center Connector adding 1.6” in length. Install using a 1/4”-20 machine screw or #14 sheet metal screw. Hardware not included.
The RAM antenna mount is designed to hold most VHF and similar antennas. The patented rubber ball and socket system securely mounts the antenna while allowing for almost infinite adjustment. Mount the antenna on a horizontal or vertical surface or anywhere in between. The ball base is made from a lightweight marine grade aluminum with powder coat. The ball socket and male 1" -14 threaded post are made from high strength composites designed for prolonged outdoor use. The RAM antenna mount will work with any standard antenna that has a 1" -14 threaded interface.
This wrist strap allows you to comfortably carry and use your IntelliSkin®-enabled phone while keeping it secured to your wrist. In addition, this strap can also act as a great tether for the stylus of IntelliSkin®-enabled Samsung devices like the Tab Active2. The GDS® wrist strap and stylus tether quickly and easily installs using the included eyelet loop.
The RAM-B-174-TOM1U consists of a hardware for mounting to both brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter, double socket arm and custom TomTom base adapter. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. The custom TomTom adapter base connects to the back of the factory cradle that is included with the purchase of the TomTom Rider 2/Urban Rider. The screws that are included with the RAM-B-174-TOM1U match up with the threads on the back of the RIDER 2/Urban Rider. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
