The RAM ROD® 2000 fishing rod holder is RAM’s original rod holder. This unique design offers quick removal of the rod when a fish is on, and features a securing flip-over bail for rod security while trolling or for use as rod storage. Utilizing two RAM patented 1.5” balls, this rod holder offers the ultimate in adjustability and versatility. Ideally suited for kayaks or traditional fishing vessels, this rod holder puts the rod and reel where you need it. Kit includes a 1.5" ball with a 2.5" diameter mounting base.
The RAM POD I, universal No-Drill™, vehicle mount is the latest in the Mobile In-Car range from RAM. This RAM POD I allows you to mount a light to medium weight item in a car safely and securely.
This version of the RAM® X-Grip® was made specifically to support the Microsoft Surface Go tablet in any rugged environment, and consists of a composite spring-loaded cradle, expandable grip arms, and additional bottom support keeper. For quick release of the device, simply squeeze the easy access knobs located on the back of the holder. Included side stabilizers allow you to rotate and secure the Surface Go in either portrait or landscape mode. Featuring AMPS and VESA hole patterns on the back of the holder, the RAM-HOL-UN9-DFSU is compatible with a wide variety of RAM® double ball mounts. The RAM® X-Grip® cradle is compatible with tablets devices that will fit the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size.
The RAM-B-102U-A consists of a short double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm.
The RAM-108-DU consists of a LONG length double socket arm, 2.5" diameter round base that contains the universal AMPs hole pattern and single strap base. The strap will accommodate rails from 1" to 2.1" in diameter. The trolling motor stabilizer will take every bit of the vibration out of your trolling motor while all the time protecting the head, shaft and mount from damage. A must for any angler with a bow mount trolling motor.
The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.14" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
Designed to hold an XM or GPS antenna magnetically, the RAM-348U plate will attach between any RAM base with the AMPS hole pattern and most standard XM units. Mount your satellite radio receiver and antenna all on a single platform for both ease of installation and use. Whether you've run out of mounting space or simply have few good mounting surfaces, the RAM-348U antenna adapter plate opens up many possibilities.
Stand off risers provide additional height to RAM holders, accommodating extra space for tablets with support accessories including hand straps and kickstands. Adding an additional 1" in height, stand off risers are the perfect accessory for IntelliSkin® cases with Hand-Stand™ Tablet Hand Strap and Kickstand. The included hardware allows for easy attachment to RAM Tab back plates.
IntelliSkin® is a protective sleeve with military-grade drop protection for the Samsung Galaxy Tab A 10.5 SM-T590 (Wi-Fi) and SM-T597 (LTE) featuring GDS® Technology™. The IntelliSkin® sleeve has an integrated GDS® connector molded directly into the skin, preventing damage to your device’s charging port from repetitious docking. Molded ruggedized contacts on the exterior of the skin are also designed for repetitive docking in field applications. This version of IntelliSkin® is compatible with a variety of USB Type-C desktop*, vehicle, and GDS® Snap-Con™ docks.
The RAM-102U-B-2461 consists of a SHORT double socket arm and 3.625" square plate with VESA hole pattern. The VESA plate contains 75x75MM hole patterns. The rubber ball is positioned 0.88" from the center of one edge.
Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup™ XL keeps your drink upright, regardless of the conditions. This kit includes the RAM® Level Cup™ XL with a 1" B size rubber ball directly attached. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. In addition, the rubber feet flex to fit various size cups as well. Drink koozie included.
The RAM® Tough-Claw™ is the ideal solution for mounting your OtterBox uniVERSE-protected iPhone or Samsung Galaxy S7/S8 to seat posts, handlebars and more. Without the need for any tools, this ball and socket mounting system offers vibration reduction and the ability to easily adjust for the perfect viewing angle. Combining protection and versatility, the RAM® Tough-Claw™ can clamp onto round, square and odd-shaped rails and bars while fitting all OtterBox uniVERSE phone cases.
The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.14" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
The Adapt-A-Post™ Side Track Base consists of a t-bolt, ratchet tooth and groove composition and female post spline hole. With a turn of the knob you can quickly fasten, adjust or remove the base to your existing track system. The ratchet tooth and groove composition enables you to slide and relocate the mount along the track; it can also rotate 360 degrees around, parallel to the track. The female post spline hole is compatible with many RAM Rod/Tube holders, along with 3rd party holders. Pressing of the side button, located on the right side of the image, you can quickly engage or release your holder from the base.
The spring loaded Tab-Lock™ cradle for the Panasonic Toughpad™ FZ-A1 is durable and provides loads of security. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. If security is a priority, the RAM Tab-Lock™ is a rock solid cradle that is sure to make most would-be thieves think twice about trying to steal your tablet. With a full complement of compatible mounts, you are sure to find the perfect solution for all your mobile needs. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. The Tab-Lock™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Product consists of holder only. Case not included.
The RAM-D-115BU, universal mounting plate, consists of a 2.25" diameter rubber ball, connected at right angles to a flat 6.25" x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices.
The RAM-B-111U consists of a medium double socket arm, 2.5" diameter round base, and 6.25" x 2" rectangle base. The round base includes a 1" B size rubber ball and contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle base also includes a 1" B size rubber ball and contains a variety of pre-drilled holes that are compatible with several marine electronic devices, including fishfinders and chartplotters.
Get the perfect shot from your action camera when you're out on the water with the Tough-Pole™. This kit consists of a 1.5" short double socket arm, 12" PVC pipe, B size short arm at the top and universal action camera adapter. The various ball and socket components allow you to adjust your mount at virtually any angle, and offer the ability to collapse and stow away when not in use. Any action camera with a two-pronged attachment (including GoPro®) will work with the action camera adapter, and the bottom socket can attach to any RAM 1.5" ball base.
FEATURESSpine mount adapter for Garmin handheld devicesCompatible with diamond ball bases for attaching a double socket arm; ball and socket technology allows for near-infinite adjustabilityMade of high-strength composites for durability and reliability in the most demanding environmentsBacked by a lifetime warranty
The RAM® Power-Grip™ XL universal scanner gun holder is designed for use with several large form factor scanner guns and is RAM® Mounts Compatible™ with a full range of ball and socket forklift mounting systems. Using high-strength composite materials, the RAM® Power-Grip™ XL secures scanner guns even when not in use. When required, easily remove the scanner gun to quickly scan the desired item. This holder features two attachment points. First, the hole pattern on the back of the holder allows for the connection of the RAM-202U or the RAM-D-254U (hardware is included for these attachments). Second, the hole pattern on the bottom of the holder allows for the connection of a 2” x 3” plate – RAM-202U-23 or RAM-D-202U-23 – or a drill-down mount (hardware is not included for these attachments). To enable use on the go, integrated holes on both sides of the holder allow for the use of a lanyard or the GDS® Shoulder Strap. Elastomeric fins grip the handle of the scanner gun to ensure a secure fit, and can be easily replaced if required.
Ideal for vehicle windshields, the RAP-B-166-2-A-UN7U consists of a 2.75" diameter low-profile RAM® Twist-Lock™ suction cup base, short length double socket arm, and the popular spring-loaded RAM® X-Grip® phone holder. The RAM® X-Grip® features an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Made of high-strength composite and stainless steel, this version of the RAM® X-Grip® fits phones ranging from 1.87" to 3.25" in width and keeps your device completely functional and accessible. RAM® ball and socket technology allows for near-infinite adjustability to achieve the ideal viewing angle – while also extending the life of your phone by providing shock and vibration damping. For outdoor applications, the RAM® X-Grip® includes a device tether that is recommended for added security and peace of mind.
The RAM-B-224U includes a 4" diameter Rubber Suction Cup base has a 1.0" diameter Rubber Ball connected at right angles. The suction cup is designed to hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass surface.
The RAM-B-174-A-UN7 consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter, short length double socket arm and universal X-Grip® cell phone cradle. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows you to move the X-Grip® mount to your optimum viewing position. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
The RAM-D-111B-IN1U is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
The RAM ROD® 2007 Fly Rod Jr. holder is one of the most popular rod holders for the kayak angler due to its simplicity and adjustability. Utilizing the RAM patented 1.5” ball, you can rotate and adjust the rod holder almost infinitely making this rod holder ideal for kayak fishing. This rod holder is designed for use with fly rods and reels. The ball and socket enable fine adjustment without the need to loosen a knob which is ideal for making small adjustments as your fishing scenario changes throughout the day. Includes 1.5" ball with a 2" X 2.5" flat surface mounting base.
The RAM-GDS-DOCKT-SAM29U includes the top docking cup and necessary hardware for converting your existing GDS® Vechicle Dock to support the Samsung Galaxy Tab Active2 with IntelliSkin®. Without having to purchase a brand new vehicle dock, this top cup allows you to modify your existing dock to work with your new IntelliSkin® device. The modularity of the Tab-Tite™, Tab-Lock™, and GDS® Vehicle Docks will always provide the highest quality and most cost-effective solutions for any tablet you own, including any future upgrade tablets.
The RAM-114-BU, high strength composite fishing rod holder with bulkhead base, is a must have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle.
The RAP-201U-B, short double socket arm, has a socket at both ends that accommodates 1.5" ball bases. This socket technology allows for almost infinite adjustment and perfect viewing angles.
The new RAM Multi-Pad™ is the perfect product to keep your busy life organized. Easily mounted in a variety of locations and ideal for your car, truck, or plane, the RAM Multi-Pad™ has many features you'd expect and others that will surprise you. With RAM in the name, you know the RAM Multi-Pad™ can be easily attached to a wide variety of RAM mounting solutions. With several mounting points and integrated magnets for holding your ferrous metal pen securely without the need for clips, the RAM Multi-Pad™ is ready to get to work for you. Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
The RAM-101U-247-25 consists of a 6 inch double socket arm, round 2.5" diameter round base with the universal AMPS hole pattern and 2.5" clamp base. The clamp base will wrap around a maximum width of 2.5" and is tightened by screwing the two plates together with the included nuts and bolts. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles.
The metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".
Looking to mount to a metal surface? The RAM® Tough-Mag™ 88mm diameter base is the powerful and durable solution you’ve been searching for. With a B size ball screwed into a ¼-20” threaded post, simply attach a compatible double socket arm and your desired RAM® device holder. This base features an industrial-strength N35 grade magnet and rubber coating that protects the metal surface you’re attaching the RAM® Tough-Mag™ to.
Looking to mount to a metal surface? The RAM® Tough-Mag™ 66mm diameter base is the powerful and durable solution you've been searching for. With a B size ball screwed into a ¼-20” threaded post, simply attach a compatible double socket arm and your desired RAM® device holder. This base features an industrial-strength N35 grade magnet and rubber coating that protects the metal surface you're attaching the RAM® Tough-Mag™ to.
