The RAM-B-347U-BT base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base contains four pre-drilled 7mm holes at each corner.
With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. This track mount solution can be drilled to any flat surface and is designed for use with #10 screws for easy installation – hardware not included. The Tough-Track works with a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones, and tablets.
The RAM-B-166-TAB6U consists of a 3.3" diameter suction cup twist lock base, double socket arm, round base adapter and Tab-Tite™ universal clamping cradle. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The spring loaded Tab-Tite™ cradle makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
The RAM-B-174-A-132U consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter, short length double socket arm and Level Cup self leveling cup holder. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. Take a corner as hard as you like, this holder is ready to ride. The integrated eyelet and hook provide an optional tethering function, securing any small or open container in any harsh environment. Compatible with any cups, cans, bottles or mugs ranging from 2.5” to 3.5” diameter.
With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. This track mount solution can be drilled to any flat surface and is designed for use with #10 screws for easy installation – hardware not included. The Tough-Track works with a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones, and tablets.
With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. This track mount solution can be drilled to any flat surface and is designed for use with #10 screws for easy installation – hardware not included. The Tough-Track works with a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones, and tablets.
With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. This track mount solution can be drilled to any flat surface and is designed for use with #10 screws for easy installation – hardware not included. The Tough-Track works with a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones, and tablets.
With the RAM Tough-Track™, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks and more. The extruded aluminum version of the RAM Tough-Track can be drilled to any flat surface and is designed for use with #8 screws for easy installation – hardware not included. Made to be a dependable and rugged mounting solution, the anodized aluminum provides a smooth slide across the track and anti-corrosion protection. The RAM-TRACK-EXA-5U features 5” of usable track length (aluminum portion), while the included top loading end caps add about 1.5” in length to each end (3” of additional length). Using the end caps allows for two installation options: either use both top loading end caps to create insertion points on both ends of the track, or use one top loading end cap and close the opposite end with the included flush end cap. The Extruded Aluminum Tough-Track is compatible with the RAM Center Loader and 90 Degree Connector, as well as a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones and tablets.
The RAP-111U consists of a 2" x 1.7" 2" x 1.7" square base that contains the universal AMPs hole pattern, STANDARD LENGTH double socket arm and 6.25" x 2" rectangle base. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
The rust proof metal u-bolt accommodates rails in diameter from 1" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt.
The RAM-202-153-B-202U consists of a round 2.5" diameter round base (Universal AMPs Hole Pattern), short double socket arm and 1.5" x 3" rectangular base. The rectangular base contains four holes with a center to center pattern of 1" x 2.5". For most applications, mount will support up to ten pounds.
With the RAM Tough-Track™, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks and more. The extruded aluminum version of the RAM Tough-Track can be drilled to any flat surface and is designed for use with #8 screws for easy installation – hardware not included. Made to be a dependable and rugged mounting solution, the anodized aluminum provides a smooth slide across the track and anti-corrosion protection. The RAM-TRACK-EXA-3U features 3” of usable track length (aluminum portion), while the included top loading end caps add about 1.5” in length to each end (3” of additional length). Using the end caps allows for two installation options: either use both top loading end caps to create insertion points on both ends of the track, or use one top loading end cap and close the opposite end with the included flush end cap. The Extruded Aluminum Tough-Track is compatible with the RAM Center Loader and 90 Degree Connector, as well as a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones and tablets.
RAM’s X-Grip® is one of the best-selling, most trusted device mounts on the market. The X-Grip® provides simple mounting and a secure hold for phones and tablets of all sizes. Under extreme environments, you can ensure added piece-of-mind with RAM’s X-Grip Tether. The X-Grip Tether is recommended for out-of-cockpit applications where excessive wind and G-force could cause movement of the device within the holder. It’s also great if you just want a little added stability and vibration control when capturing video from the mount. The Tether is made of high-strength elastomeric material and fits around the X-Grip® holder for easy device insertion.
The RAM® vehicle dock with GDS Technology is a spring loaded, quick release cradle that offers a secure fit with easy access to the mounted tablet. This docking station is compatible with the Apple iPad mini 4 with IntelliSkin . The integrated GDS Technology platform enables data and charging capabilities to the mounted tablet. Without the need to remove the IntelliSkin from the device, the user can quickly and efficiently mount the device in the vehicle dock and keep the device charged.
The RAM ROD® 2000 fishing rod holder is RAM’s original rod holder. This unique design offers quick removal of the rod when a fish is on, and features a securing flip-over bail for rod security while trolling or for use as rod storage. Utilizing two RAM patented 1.5” balls, this rod holder offers the ultimate in adjustability and versatility. Ideally suited for kayaks or traditional fishing vessels, this rod holder puts the rod and reel where you need it. Kit includes a 1.5" ball with a 2.5" diameter mounting base.
This version of the RAM® X-Grip® was made specifically to support the Microsoft Surface Go tablet in any rugged environment, and consists of a composite spring-loaded cradle, expandable grip arms, and additional bottom support keeper. For quick release of the device, simply squeeze the easy access knobs located on the back of the holder. Included side stabilizers allow you to rotate and secure the Surface Go in either portrait or landscape mode. Featuring AMPS and VESA hole patterns on the back of the holder, the RAM-HOL-UN9-DFSU is compatible with a wide variety of RAM® double ball mounts. The RAM® X-Grip® cradle is compatible with tablets devices that will fit the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size.
The RAM-108-DU consists of a LONG length double socket arm, 2.5" diameter round base that contains the universal AMPs hole pattern and single strap base. The strap will accommodate rails from 1" to 2.1" in diameter. The trolling motor stabilizer will take every bit of the vibration out of your trolling motor while all the time protecting the head, shaft and mount from damage. A must for any angler with a bow mount trolling motor.
The RAP-B-200-12U composite double socket swivel arm consists of double B size 1" diameter open ball sockets with a 360-degree rotation point at the center of the arm. With open ball sockets at each end, attach RAM® B size ball components for unsurpassed adjustability.
Designed to hold an XM or GPS antenna magnetically, the RAM-348U plate will attach between any RAM base with the AMPS hole pattern and most standard XM units. Mount your satellite radio receiver and antenna all on a single platform for both ease of installation and use. Whether you've run out of mounting space or simply have few good mounting surfaces, the RAM-348U antenna adapter plate opens up many possibilities.
Stand off risers provide additional height to RAM holders, accommodating extra space for tablets with support accessories including hand straps and kickstands. Adding an additional 1" in height, stand off risers are the perfect accessory for IntelliSkin® cases with Hand-Stand™ Tablet Hand Strap and Kickstand. The included hardware allows for easy attachment to RAM Tab back plates.
The RAM® Tough-Claw™ is the ideal solution for mounting your OtterBox uniVERSE-protected iPhone or Samsung Galaxy S7/S8 to seat posts, handlebars and more. Without the need for any tools, this ball and socket mounting system offers vibration reduction and the ability to easily adjust for the perfect viewing angle. Combining protection and versatility, the RAM® Tough-Claw™ can clamp onto round, square and odd-shaped rails and bars while fitting all OtterBox uniVERSE phone cases.
The Adapt-A-Post™ Side Track Base consists of a t-bolt, ratchet tooth and groove composition and female post spline hole. With a turn of the knob you can quickly fasten, adjust or remove the base to your existing track system. The ratchet tooth and groove composition enables you to slide and relocate the mount along the track; it can also rotate 360 degrees around, parallel to the track. The female post spline hole is compatible with many RAM Rod/Tube holders, along with 3rd party holders. Pressing of the side button, located on the right side of the image, you can quickly engage or release your holder from the base.
FEATURESSpine mount adapter for Garmin handheld devicesCompatible with diamond ball bases for attaching a double socket arm; ball and socket technology allows for near-infinite adjustabilityMade of high-strength composites for durability and reliability in the most demanding environmentsBacked by a lifetime warranty
The RAM-B-224U includes a 4" diameter Rubber Suction Cup base has a 1.0" diameter Rubber Ball connected at right angles. The suction cup is designed to hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass surface.
The RAM-B-174-A-UN7 consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter, short length double socket arm and universal X-Grip® cell phone cradle. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows you to move the X-Grip® mount to your optimum viewing position. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
The RAM-D-111B-IN1U is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
The RAM-GDS-DOCKT-SAM29U includes the top docking cup and necessary hardware for converting your existing GDS® Vechicle Dock to support the Samsung Galaxy Tab Active2 with IntelliSkin®. Without having to purchase a brand new vehicle dock, this top cup allows you to modify your existing dock to work with your new IntelliSkin® device. The modularity of the Tab-Tite™, Tab-Lock™, and GDS® Vehicle Docks will always provide the highest quality and most cost-effective solutions for any tablet you own, including any future upgrade tablets.
The RAM-114-BU, high strength composite fishing rod holder with bulkhead base, is a must have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle.
The RAP-201U-B, short double socket arm, has a socket at both ends that accommodates 1.5" ball bases. This socket technology allows for almost infinite adjustment and perfect viewing angles.
The RAM-101U-247-25 consists of a 6 inch double socket arm, round 2.5" diameter round base with the universal AMPS hole pattern and 2.5" clamp base. The clamp base will wrap around a maximum width of 2.5" and is tightened by screwing the two plates together with the included nuts and bolts. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles.
The metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".
Looking to mount to a metal surface? The RAM® Tough-Mag™ 88mm diameter base is the powerful and durable solution you’ve been searching for. With a B size ball screwed into a ¼-20” threaded post, simply attach a compatible double socket arm and your desired RAM® device holder. This base features an industrial-strength N35 grade magnet and rubber coating that protects the metal surface you’re attaching the RAM® Tough-Mag™ to.
