Firma: TopPC.ee

The aqualis DDC 100 ml reservoir from aqua computer is designed for direct mounting to a Laing DDC pump not included in the delivery. For this purpose, the pump is attached only by means of a fastening ring and four screws in the base of the expansion tank. Separately available mounting rubbers can also be screwed into the base of the AGBs to allow mounting on the PC case. Alternatively, the pump and expansion tank can also be attached via the mounting tabs of the pump in the PC case. The container itself is made of high-grade borosilicate glass, which, in contrast to the acrylic glass often used for tube expansion tanks, has a very high hardness and scratch resistance, a very low thermal expansion and excellent chemical and thermal resistance. The glass tube of this 100 ml version has an outside diameter of 50 mm and a wall thickness of 5 mm. The base and lid, however, are made of Delrin, each have two G1 / 4-inch ports and are connected inside the tube by a stainless steel rod. This version is additionally provided with a nano-coating, which allows water to simply roll off the inside of the glass tube. This creates a cool visual effect that enhances the entire reservoir. Note: Pump, connectors and decoupling rubbers are not included, please purchase separately. Technical details: Dimensions without pump: 62 x 62 x 132 mm (W x H x D)Dimensions with pump (not included): 88 x 62 x 147 mm (W x H x D)Diameter tube: 50 mmWall thickness: 5 mmMaterial: borosilicate glass (container), Delrin (base & lid), stainless steel (screws & connecting rod)Füllvolumen: 100 mlConnection thread: G1 / 4 inchesScope of delivery: 1x equalizing tank 2x screw plug G1 / 4 (pre-assembled) Four screws for fixing the pump

The reservoirs aquainlet PRO and aquainlet XT are designed to be directly mounted onto an aquastream XT or Eheim 1046 pump. The design is perfectly matched to the pump, after installation pump and reservoir form a virtually seamless unit. In particular, the mounting rails of the pump are extended into the reservoir, which for the first time allows for the mounting plate to be installed beneath the center of gravity. This is especially helpful when using rubber decouplers or a shoggy sandwich. When installed onto the suction port of the pump, an o-ring seals the connection between pump and reservoir and two latches secure the reservoir to the pump housing, preventing accidental release of the bayonet coupling between pump cover and pump housing. Two connection threads for the return line located at the front and the side of the unit allow for flexible installation options and are paticularly useful if the reservoir is to be installed with limited space.The reservoirs aquainlet PRO and aquainlet XT are closely related to the aqualis series and are also equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and top of the aquainlet reservoirs are made from Delrin and connected by a stainless steel rod. The aquainlet XT variants feature an acrylic window in the base part and one LED (5 mm size) can be installed into the base part. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors.All variants are also available with a nano coating that will cause water to roll off the inner surface of the borosilicate glass tube.Technical details:Dimensions without pump: approx. 56 x 67 x 198 mmFilling volume: approx. 150 mlConnection threads: G1/4Compatible to the following pumps:- aquastream XT- Eheim 1046 and pumps identical in constructionScope of delivery:One ReservoirThree sealing screws G1/4 (preinstalled)Please note: Fittings and pump are not included in delivery, please order seperately.>

Thermal Grizzly Minus Pad 8 - 120 × 20 × 0,5 mm

"Reflecta CrystalLine mootor pakub väga head hinna ja kvaliteedi suhet. Keerukas mootorimehhanism võimaldab hõlpsasti välja- ja sissetõmbamist. Kvaliteetne kangas annab vaatajale suurepärase vaate.

REFLECTA CR 300X208 16:9 MOTOR BL FRAME

Kompaktes & lüfterloses Alu-Spezialgehäuse von Akasa, für Intel-NUC-Boards der 7. Generation im UCFF-Format, 2x USB 3.0 & 2x USB 2.0 an der Frontseite

CAT 6A S-FTP Patchkabel, Cu, LSZH AWG 26/7, Länge 1 m, Farbe Grün

CAT 6 S-FTP Patchkabel, Cu, LSZH AWG 27/7, Länge 0,5 m, Farbe Grau