AXAGON CRE-SM3SD FlatReader on kompaktne ID-kaardilugeja, millel on USB 2.0 liides ja täiendavaid pesad SD-, microSD- ja SIM-kaartide lugemise jaoks. Lugeja toetab kõiki tavalisi kontaktsete nutikaartide vorminguid, kiipkaarte ja muid kaarte, sealhulgas kontaktseid pangamaksekaarte või kontaktseid elektroonilisi ID-kaarte. Lugeja on ühilduv enamiku riiklike eID (elektrooniliste ID-kaartide) rakendustega. Tänu SIM-kaardi pesale, mis sisaldab SIM-haldustarkvara, SD- ja microSD-kaardi pesadele, saab lugejat kasutada ka varundamiseks ja andmete ülekandmiseks.
The 12-in-1 USB Type-C docking station allows you to connect multiple devices to your notebook or PC, including 2x USB-C, 2x USB-A 3.0, 2x USB-A 2.0, 2x HDMI, DP 1.4, SD/microSD card reader, and Gigabit LAN. You can extend or mirror your display on up to three monitors with a resolution of up to 3840x2160/60 Hz. The USB 3.0 ports enable data transfer rates of up to 5 Gbps, and the LAN (RJ45) interface provides high-speed internet access. Additionally, connected devices can be charged with up to 100 W via an optional USB-C charger. The docking station is compatible with Windows and macOS and is suitable for MacBook, iPad Pro, Huawei MateBook X, Dell XPS 13, ThinkPad, Chromebook, and other devices.
Multiport USB-C 3.2 Gen 1 hub AXAGON HMC-6GL. Input:
1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector.
Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 connector. Compatible with Thunderbolt 3. Input USB type C male connector on fixed 20 cm cable.
USB outputs: 3x SuperSpeed USB port, USB-A female connector. 1x USB type C Power Delivery port (only charging) USB-C female connector. Supports transmission rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 1 interface used (theoretical-ly up to 5 Gbit/s).
USB-C hub can handle connection of several external drives simultaneously. Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.1A at 5V (depending on the capabilities of the computer's USB port).
HDMI output: HDMI A (F) female connector.
Maximum supported resolution 4K / 4096 x 2160 at 30 Hz.
WQHD resolution 2560 x 1440 at 60 Hz max. FullHD resolution 1920 x 1080 at 60, 100, 120 Hz max. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. At the same time, support from the device (laptop, phone) and the operating system is necessary. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signaling) support. Full HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio format support. Sample rate up to 192 kHz and 24bit audio support depends on source and target device i.e. notebook/phone and TV/display/AV receiver. RJ-45 Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s.
BOOST↑CHARGE™ PRO 3-in-1 on juhtmevaba laadija kõikide Sinu igapäevaselt kasutatavate nutiseadmete jaoks. Laadimisalus võimaldab Sul laadida kolme seadet korraga - nii saad ööseks laadima panna oma MagSafe toega iPhone 12 või uuema, Apple AirPods või AirPods Pro peakomplekti ja Apple Watch nutikella. • iPhone juhtmevaba laadimine võimsusega kuni 15W • LED indikaator annab märku korrektsest seadmete laadimisest • Ühildub MagSafe ümbristega iPhone laadimine võimalik vaid iPhone 12 ja uuema seeriaga, millel on MagSafe tugi!
Compact 45W USB-C Charger with included 2m USB-C cable. Type Wall 1xUSB-C, Output power capacity, W 45 Watts Colour Black, Dimensions 83 x 27 x 48mm Weight 0.07 kg
MediaRange 43W Fast charging adapter (Euro plug), 1x USB-C and 1x USB-A, USB-C® Power Delivery and Quick Charge™ enabled, white MediaRange wall chargers are ideal for charging smartphones, tablets or other devices such as notebooks via the wall socket. Our charging adapter supports all common fast charging technologies and has a maximum charging power of 43W. With a total of 2 charging ports, 1x USB-C and 1x USB-A, up to two end devices can be connected and charged simultaneously at a single socket. Intelligent and state-of-the-art chipsets permanently control and monitor the charging power and temperature development during the entire charging process. Our 43W charging adapter is Intertek GS approved and has, in addition to all relevant protection mechanisms, a shock and fire resistant V0 polycarbonate housing and thus ensures the highest level of safety. Model name MRMA113 Type Wall, 1xUSB 3.0 1xUSB-C, Wattage 43 Watts Colour White, Dimensions 52.5 x 92.5 x 28mm Weight 0.108 kg
EcoFlow PowerStream Microinverter. EcoFlow PowerStream Solar System is a balcony solar system with a portable power station that allows you to use solar energy day and night and reduce energy bills. EcoFlow Smart Plug and EcoFlow app enable real-time energy usage monitoring and optimization. This system stores all excess energy in a portable power station during the daytime and gives it back to you whenever you need it. With up to 1039kWh feeding into your home per year, you can save a maximum sum of 415€. And your energy bill savings are 3.5 times as much as that from using other home solar systems without batteries. Model name PowerStream Microinverter. Dimensions 242 x 169 x 33 mm, Weight 3 kg
Frame size: 18 inches / Handlebar & Seat tube: Steel & Alloy / Chain: KMC Z7 / Front hub & Rear hub: Shimano FD-TZ500 & Shimano RD-TY300D / Gear-Brake lever: Shimano SF-EF41 21 Gear / Brake: Dacron V Breake Alloy / Rim: Dacron Double Wall / Tyre: Mitas Ocelot 29x2.10 / Accessories (not included): Chain housing, Front & Rear carrier, Front & Back lighting, Lock // Assembly: Bicycle comes in the original factory package, 85% assembled (front wheel, handlebars, seat, pedals might be removed and need installing). Tools for assembling the bicycle are not included in the package. Client is responsible for correct bicycle assembly, preparation for use and initial maintenance of the bicycle at any service centre (service record in the maintenance sheet/warranty card is mandatory). In case of violating this rule warranty will not be effective. Regarding the assembly of the bicycle we recommend to consult a qualified technician. Rocksbike AIM 1.2 Adults, MTB Wheel size 29", Number of speeds 21 Frame Alloy, Bicycle seat Dacron XML Mechanic Lockout Brakes Aluminium V-shaped, Front gears 3 Rear gears 7, Rear derailleur Shimano RD-TY300D Grey / Blue, Weight 16.2 kg
Frame size: 18 inches Handlebar & Seat tube: Alloy Chain: KMC Z33 Front hub & Rear hub: SF-HB10 (QR) & SF-HB 10 Gear-Brake lever: Dacron ST-40 21 Gear Brake: PROMAX V BRAKE ALLOY Rim: Dacron Double Wall Tyre: MITAS SEPIA 700X40C Accessories (not included): Chain housing, Front & Rear carrier, Front & Back lighting, Lock // Assembly: Bicycle comes in the original factory package, 85% assembled (front wheel, handlebars, seat, pedals might be removed and need installing). Tools for assembling the bicycle are not included in the package. Client is responsible for correct bicycle assembly, preparation for use and initial maintenance of the bicycle at any service centre (service record in the maintenance sheet/warranty card is mandatory). In case of violating this rule warranty will not be effective. Regarding the assembly of the bicycle we recommend to consult a qualified technician. Neutrone 5.1 Adults, MTB Wheel size 28", Number of speeds 21 Frame Alloy, Bicycle seat ZOOM 120 E-MLO Brakes Aluminium V-shaped, Front gears 3 Rear gears 7, Rear derailleur SHIMANO RD-TY300 TOURNEY Grey / Red, Weight 14.4 kg
Frame size: 18 inches / Handlebar & Seat tube: Alloy / Chain: KMC Z33 / Front hub & Rear hub: SF-HB10 (QR) & SF-HB 10 / Gear-Brake lever: Dacron ST-40 21 Gear / Brake: PROMAX V BRAKE ALLOY / Rim: Dacron Double Wall / Tyre: MITAS SEPIA 700X40C / Accessories (not included): Chain housing, Front & Rear carrier, Front & Back lighting, Lock // Assembly: Bicycle comes in the original factory package, 85% assembled (front wheel, handlebars, seat, pedals might be removed and need installing). Tools for assembling the bicycle are not included in the package. Client is responsible for correct bicycle assembly, preparation for use and initial maintenance of the bicycle at any service centre (service record in the maintenance sheet/warranty card is mandatory). In case of violating this rule warranty will not be effective. Regarding the assembly of the bicycle we recommend to consult a qualified technician. Neutrone 5.1 Adults, MTB Wheel size 28", Number of speeds 21 Frame Alloy, Bicycle seat ZOOM 120 E-MLO Brakes Aluminium V-shaped, Front gears 3 Rear gears 7, Rear derailleur SHIMANO RD-TY300 TOURNEY Green / Grey, Weight 14.4 kg
Desktop fan with lamp and wireless charger - Charge your phone wireless - Practical integrated fan and LED desk light - Please check the user manual of your smartphone to find out if it supports wireless charging Model name TA-WPC10-LEDFAN-01 Type Desktop/Wireless, Output power capacity, W 10 Watts Included Accessories USB power cable, 1.50 m;User manual, Weight 0.3 kg
PS4193 wall charger white 30W PD 3.0/ 1 USB-C • Power Delivery 30W • Type-C wall charger (EU plug) • FAST charger for iPhone (iPhone 8 and newer) • MacBook charging • Support PD and PPS charging devices • Outer shell is made of non-flammable and durable plastic Type Wall 1xUSB-C, Wattage 30 Watts Colour White, Dimensions 45x30x85 mm Weight 0.08 kg
Contactless control without reliability compromises KeyPad Plus is a combination of design, advanced encryption technology, and elaborated user experience for the most straightforward and protected security management. Arm and disarm Ajax, activate Night Mode and manage specific groups with a Pass card or Tag1 key fob. Colour Black Dimensions 165 × 113 × 20 mm
Frame size: 18 inches / Handlebar & Seat tube: Steel / Chain: KMC Z33 / Front hub & Rear hub: SF-A210 QR & SF-A210 QR Bearing (Alloy) / Gear & Brake lever: Dacron ST-51 24 Gear & Sypo Hydraulic / Brake: Sypo DS01 Mechanic Disc / Rim: Dacron Double Wall / Tyre: Mitas Ocelot 27.5x2.10 / Accessories (not included): Chain housing, Front & Rear carrier, Front & Back lighting, Lock // Assembly: Bicycle comes in the original factory package, 85% assembled (front wheel, handlebars, seat, pedals might be removed and need installing). Tools for assembling the bicycle are not included in the package. Client is responsible for correct bicycle assembly, preparation for use and initial maintenance of the bicycle at any service centre (service record in the maintenance sheet/warranty card is mandatory). In case of violating this rule warranty will not be effective. Regarding the assembly of the bicycle we recommend to consult a qualified technician. Rocksbike Supreme 4.1 Adults, MTB Wheel size 27.5", Number of speeds 24 Frame Alloy, Bicycle seat Dacron XML 38.1 Brakes Mechanical disc brakes, Front gears 3 Rear gears 8, Rear derailleur Shimano RD-TY300 Tourney Black / Yellow, Weight 15.6 kg
TomTom GO Expert Drive confidently with TomTom GO Expert. Real-time alerts, smart ways around traffic and routes tailored to your large vehicle make sure you always know what’s ahead. Navigate with ease from a 7” touchscreen Enjoy up to 4x faster responsiveness Expert navigation for your large vehicle Never find yourself approaching a road, tunnel or bridge not fit for your vehicle with custom routing - based on vehicle size, weight, cargo type and maximum speed. Now updated with City Ban routing, and ADR Tunnel Code and UN Class restrictions. Navigation type Truck GPS Navigation, Screen size 5" Speakers, Screen resolution 1280 x 800 Built-in Memory 32 GB, RAM 2048 MB Wireless LAN, Bluetooth Voice control
The INT-TSH2 keypad is dedicated for operation and programming of the INTEGRA, INTEGRA Plus and VERSA families of control panels. It is an ideal solution for users seeking easy daily operation of the alarm system and building automation elements, including the KNX system. The combination of large size and universal design makes the device perfectly suited to both modern and traditional interiors. Case color: all black Colour Black Dimensions 196 x 129 x 22 mm
The INT-TSI keypad is a real command center for a smart alarm system. As its interface can be customized to individual user's needs, it provides a perfect solution both for people expecting ease of operation and for advanced users who make use of the extended system functionality. Colour Black
20W USB Type A & C Charger. - Charges and powers two devices simultaneously - 20W Power Delivery and fast charging for smartphones, tablets and other mobile devices - Compact design for maximum mobility - Built-in safety features as overvoltage and overcurrent protection Type Wall Connectors USB Type A Female, USB Type C Female, Output power capacity, W 20 Watts Colour White, Weight 0.05 kg
GO Superior Upgrade your drive Large HD touch screen Trusted TomTom world maps High performance and responsiveness Fast map updates via Wi-Fi NEW Enhanced Visual Cues NEW Avoid Low Emission Zones NEW USB-C Moving lane guidance
The Acer notebook power supply from Mitsu is equipped with a ferrite filter and excellent protection against overvoltage, overheating, overload and overcharging. Acer laptop chargers are aimed at the most demanding users, who appreciate stress-free and comfortable work. The quality of the product is confirmed by the following certificates: CE, ROHS, FCC and strict quality control eliminating possible defects.QUALITY BEFORE EVERYTHING Temperature resistance - The influence of high and low temperatures on the resistance of the protection systems and the electrical parameters of the PSU is tested. Electrical test - Testing the correctness of electrical connections between individual components of the PSU. Short-circuit and over-voltage test - The reaction of the PSU protection systems due to a short circuit and a sudden voltage jump simulated by supplying a high-voltage pulse at the input of the PSU is tested. Final test - The output voltage level of the UPS is tested by subjecting it to an hour-long continuous load. The set includes a power cord, warranty card and instruction manual.How to choose the right power supply?The DC supply parameters (direct current DC) are usually given under the laptop on the sticker after the INPUT sign The voltage V (volts) of the power supply should match the value given on laptop A current (amps) should be equal to or greater than the value on the laptop, this parameter means the maximum current that is allowed load the power supply, the laptop decides about the size of the load W power (watts) is the result of the multiplication of voltage and current The shape and size of the plug should be compared with the picture offeredcthe item and dimensions of the plug given in the description; we can alsodetermined on the basis of the PSU manufacturer's database
Juhtmevabad kõrvaklapid mänguritele; Rikkalik stereoheli & varrega mikrofon; Pehmed kõrvapadjad & mitmevärviline LED valgustus; Ühildub nii arvuti, nutiseadmete kui konsoolidega; Aku kestab kuni 10 tundi järjest
RELIABLE POWER FROM A LIGHTWEIGHT, PORTABLE ADAPTER The ROG AC100-00 is a 100W AC Adapter with a USB Type-C (USB-C) connector and is designed for ROG laptops that support charging via USB-C. It supports international voltage standards (100-240V, 50-60Hz), and includes USB Power Delivery (PD) 3.0 technology that automatically detects and supplies 5V/3A, 9V/3A, 15V/3A and 20V/5A. EASY USB TYPE-C CHARGING 100W output via USB-C automatically supplies the right current and voltage, and the 160cm cable and 100-240V input give you portable flexibility in a lightweight package. MULTIPLE SAFETY PROTECTION Multiple output protection, including Over Voltage Protection (OVP), Over Current Protection (OCP), Over Temperature Protection (OTP) and Short Circuit Protection (SCP) are built-in to keep you and your laptop safe.
The AXAGON ACU-DPQ100 GaN travel wall charger enables fast charging of up to three mobile devices at the same time. With 100W of total power, the charger charges notebooks, phones and other mobile devices at the highest possible speed. The adapter offers a standard USB-A connector, but also two double-sided USB-C connectors. Compact size and high performance is given by the new GaN technology used. The components used with Galium Nitride work with high efficiency, which allows you to achieve high performance with a small size. The charger is equipped with two Power Delivery 3.0 / Quick Charge 4+ USB Type-C outputs and one Quick Charge 3.0 USB Type-A output, enabling fast charging of not only smartphones and tablets, but also laptops. The Quick Charge 4+ technology allows up to 4 times faster charging of phones than a standard USB charger. Power Delivery 3.0 technology not only supports charging of modern phones, but also enables 100W PD charging of powerful laptops. The charger supports 20W PD charging.
Superspeed USB-C 3.2 Gen 2 hub AXAGON HMC-5G2 SPEEDSTER 5H expands your laptop, computer or phone with five ports. You can easily and quickly connect up to four USB devices and HDMI display to your computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The hub will provide you with a simple and compact laptop docking station. The USB hub offers a total of four USB outputs - two with standard USB-A connectors and two with modern USB-C connectors. Thanks to the advanced USB 3.2 Gen 2 interface, you can connect high-speed devices such as NVMe M.2 external drives to all outputs at up to 2x higher speed 10 Gb/s compared to standard Generation 1 hubs with a speed of only 5 Gb/s. The hub can handle permanent connection of several external drives simultaneously and USB-C ports allow charging of phones and tablets with a current of up to 3A. One of the USB-C ports also allows you to use the Power Delivery function to power up a laptop or mobile phone via hub from a charger. Connect the USB-C Power Delivery charger to the hub and connect the hub to the laptop. This saves one port, which could be useful. The condition is a laptop with Power Delivery charging support from the USB-C port and a suitable PD charger. HDMI output provides high quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. The compact and slim aluminum body looks great and also ensures mechanical resistance and quality cooling. The finely structured surface with no fingerprint remains will also please you. The USB-C hub is an ideal accessory for laptops without USB-A connectors and video output such as the MacBook Pro. You can use your existing USB peripherals without having to buy new ones. Thanks to the Plug and Play and Hot Plug functions, the connection of the hub itself is very simple without complicated installation. It is also possible to easily connect and disconnect peripherals while the computer is running. The hub does not afraid of connection to phones with a USB-C connector - for example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input: 1x USB 3.2 Gen 2 / SuperSpeed USB 10 Gbps port, USB-C male connector. Backward compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0 and USB 2.0. Compatible with Thunderbolt 3. Input USB type C male connector on fixed 13cm cable. USB outputs: 2x SuperSpeed USB 10 Gbps port, USB-A female connector. 1x SuperSpeed USB 10 Gbps port, USB-C female connector. 1x SuperSpeed USB 10 Gbps port for data transfer or Power Delivery charging, USB-C female connector. Supports transmission rates 10.000 / 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ / SuperSpeed / High / Full / Low speed). The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). USB-C hub can handle connection of several external drives simultaneously. Powerful mobile device charging in the USB-C ports by current up to 3A. HDMI output: HDMI. HDMI A (F) female connector. Maximum supported resolution 4K / 4096 x 2160 at 30 Hz. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Correct OS is also necessary. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signaling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Up to 8-channel LPCM audio, compressed audio (AC-3, DTC) and HBR audio format support. Sample rate up to 192 kHz and 24 bit audio support depends on source and target device i.e. notebook/phone and TV/display/AV receiver. Power Delivery: Power Delivery 3.0 support device power supply from the PD wall charger via USB-C hub. Maximum power supply power via PD USB-C hub output 60W - 20V/3A. Notebook or phone with Power Delivery charging support from the USB-C port and a suitable PD charger is necessary. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub operation is better dissipated and transferred to the surroundings. Blue LED indicates computer USB port connection (steady light) or connection to Power Delivery charger (brighter light) High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 105 x 40 x 12 mm. Weight 60 g (incl. cable). USB cable length 13 cm. Supported operating systems: Microsoft Windows 10, Mac OS, Linux, Android and Chrome OS.Compatibility depends on used OS and support from device manufacturer. Note 1: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed. Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Package contains: USB-C hub with fixed 13 cm long cable, printed installation guide in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.
Multiport USB-C 10Gbps hub AXAGON HMC-6GM2 GEN2COMBO 6in1 expands your laptop, computer or phone with five ports and external box for M.2 disk. You can easily and quickly connect up two USB devices, SD card reader, one monitor, and an NVMe or SATA M.2 SSD to your computer via the reversible USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The USB-C hub will provide you with a simple and compact 6in1 docking station for notebook like MacBook Air or Pro. The USB hub offers two USB 10Gbps outputs. One with standard USB-A and one with USB-C data connector. The hub can also handle permanent connection of two external drives simultaneously. Thanks to the fast USB 3.2 Gen 2 interface, the hub's transfer rate is up to 10Gbps. Another USB-C connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI output provides high quality image up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port and above. You can connect a NVMe or SATA M.2 SSD drive thanks to the built-in slot on the back. The multiport hub thus becomes an external drive. M.2 cards can be single-sided or double-sided up to a size of 22x80 mm. The external M.2 box has no capacity limitations for SSDs and supports modern functions such as TRIM, UASP and enables reading S.M.A.R.T. disk status monitoring information. Card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. Thanks to the high-speed USB interface, you can make the most of the potential of modern memory cards. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. You will also be pleased with the finely textured surface, which does not leave fingerprints. The port replicator is the ideal accessory for laptops with a lack of USB connectors, memory or video outputs. Fixed USB-C cable 20 cm long. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input: USB 10Gbps (USB 3.2 Gen2). Compatible with Thunderbolt 3 and 4. Connection via reversible USB type C male connector on a fixed 20 cm cable. USB outputs: 1x USB 10Gbps port, USB-A female connector. 1x USB 10Gbps port, USB-C female connector. 1x USB Power Delivery 100W (only for charging), USB-C female connector. USB-C hub handle the connection of two external drives simultaneously. HDMI output: 1x HDMI A port, HDMI A female connector. Video resolution and properties: Maximum supported resolution 4K / 4096 x 2160 at 60 Hz. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Supports up to 8-channel LPCM audio, compressed audio (AC-3, DTS), and HBR audio formats. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub Maximum power supply power via PD USB-C hub output 100W - 20V/5A Required PD support from the device (laptop, phone) and a suitable PD wall charger The card reader - two slots: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash. SD slot: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x /4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. M.2 SSD slot: NVMe & SATA M.2 SSD disks. Designed for M key or B+M key format cards. NGFF 75-pin M-key slot for M.2 drives. Supports M.2 drives with a size of 2242, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Support of TRIM functionality to limit gradual degradation of the SSD performance over time. Support for booting from an SSD in the hub's M.2 slot. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0). Supports transmission rates 10.000 / 5.000 Mbit/s. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub and M.2 disk operation is better dissipated and transferred to the surroundings. The LED indicates the data transfer of the M.2 drive. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 149 x 65 x 17 mm. Weight 178 g (incl. cable). USB cable length 20 cm. Supported operating systems: Windows 10 / 11 and later, macOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 20 cm long cable mounting material multilingual manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA packed in a cardboard box
Multiport USB-C 10Gbps hub AXAGON HMC-12GM2 GEN2COMBO 12in1 expands your laptop, computer or phone with eleven ports and external box for M.2 disk. You can easily and quickly connect up to two monitors, four USB devices, a Gigabit Ethernet network, headphones, an SD card reader, and an NVMe or SATA M.2 SSD o your computer via the reversible USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The USB-C hub will provide you with a simple and compact 12in1 docking station for notebook like MacBook Air or Pro. The USB hub offers three USB outputs with standard USB-A connectors. Two with 5Gbps speeds and a third with 10Gbps speeds for more demanding devices. It also offers a USB-C 10Gbps data connector. The hub can also handle permanent connection of two external drives simultaneously. Thanks to the fast USB 3.2 Gen 2 interface, the hub's transfer rate is up to 10Gbps. The second USB-C connector is reserved only for powering and simultaneous charging of laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI and DisplayPort outputs provide a high-quality picture. Whether used alone or simultaneously, the ports offer resolutions up to 4K/60Hz Ultra HD and support multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port and above. You can connect a NVMe or SATA M.2 SSD drive thanks to the built-in slot on the back. The multiport hub thus becomes an external drive. M.2 cards can be single-sided or double-sided up to a size of 22x80 mm. The external M.2 box has no capacity limitations for SSDs and supports modern functions such as TRIM, UASP and enables reading S.M.A.R.T. disk status monitoring information. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card.Card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. Thanks to the high-speed USB interface, you can make the most of the potential of modern memory cards. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. Active cooling is provided by a silent integrated fan, which cools both the M.2 disk and the body of the hub itself. You will also be pleased with the finely textured surface, which does not leave fingerprints. The port replicator is the ideal accessory for laptops with a lack of USB connectors, memory or video outputs. The 50 cm USB-C cable is detachable and can be replaced with a longer cable if needed. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input: USB 10Gbps (USB 3.2 Gen2). Compatible with Thunderbolt 3/4. Connection via reversible USB type C female connector. USB outputs: 1x USB 10Gbps port, USB-A female connector. 2x USB 5Gbps port, USB-A female connector. 1x USB 10Gbps port, USB-C female connector. 1x USB Power Delivery 100W (only for charging), USB-C female connector. USB-C hub can handle the connection of two external drives simultaneously. Video outputs: 1x HDMI A port, HDMI A female connector. 1x DP port, DisplayPort female connector. Video resolution and properties: Maximum supported resolution when each port is connected individually is 4K / 4096 x 2160 at 60 Hz. 2 simultaneously connected monitors - up to 4K/60Hz on both monitors. For proper video output function, the hub must be plugged into a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) version 1.4 or higher, or a USB-C port with Thunderbolt 3/4 support. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Supports up to 8-channel LPCM audio, compressed audio (AC-3, DTS), and HBR audio formats. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub. Maximum power supply power via PD USB-C hub output 100W - 20V/5A. Required PD support from the device (laptop, phone) and a suitable PD wall charger. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x / 4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. Copying from card to card. M.2 SSD slot: NVMe & SATA M.2 SSD disks. Designed for M key or B+M key format cards. NGFF 75-pin M-key slot for M.2 drives. Supports M.2 drives with a size of 2242, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Support of TRIM functionality to limit gradual degradation of the SSD performance over time. Support for booting from an SSD in the hub's M.2 slot. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mbit/s auto-detection. Supports IPv4 / IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Support IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminats the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN function in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, ECMA-393 proxZzzy for sleeping hosts, RealWoW! and also Link Change Wake-up. Advanced Power Management features: The adapter supports advanced power management and supports advanced power saving e.g. when the Ethernet cable disconnection. Supported Power Management technologies are e.g. Advanced Configuration Power management Interface (ACPI), Link Power Management (LPM) or IEEE 802.3az EEE (Energy Efficient Ethernet) and others. Audio output / input: 1x 3.5 mm jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel analog mono microphone input 48 kHz @ 16 bit for recording. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0). Supports transmission rates 10.000 / 5.000 Mbit/s. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub and M.2 disk operation is better dissipated and transferred to the surroundings. The LED indicates the data transfer of the M.2 drive. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 149 x 65 x 17 mm. Weight 178 g (incl. cable). USB cable length 50 cm. Supported operating systems: Windows 10 / 11 and later, macOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub USB-C cable 50 cm long mounting material multilingual manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA packed in a cardboard box
USB hub with versatile connectivity options, high speed of up to 5 Gbps, powerful Power Delivery feature, support for 8K/30Hz and 4K/120Hz, compatibility with various operating systems
Multiport USB-C 3.2 Gen 1 hub AXAGON HMC-6H4A expands your laptop, computer or phone with six ports. You can easily and quickly connect up to four USB devices and HDMI display to your computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology. The USB-C hub will provide you with a simple and compact 6in1 docking station for notebook like MacBook Pro. The USB hub offers four USB outputs with standard USB-A connectors. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. USB-C connector is dedicated to power up a mobile phone or laptop using Power Delivery 3.0 technology by power up to 100W. Connect the USB-C Power Delivery charger to the hub and connect the hub to the laptop. This saves one USB-C port. The condition is a laptop with Power Delivery charging support from the USB-C port and a suitable PD charger. HDMI output provides high quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. Popular gaming resolution WQHD 2560 x 1440px at 60Hz or FullHD 1920 x 1080px at 60, 100 and 120Hz max. are also supported. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Elegant aluminum body ensures mechanical resistance and quality cooling. The glossy upper part with a decent backlit logo underlines the premium look of the hub. Port replicator is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. You can connect a flash drive, keyboard, mouse, monitor, TV or projector to your phone. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0. Compatible with Thunderbolt 3. Connecting USB type C male connector on a fixed 20cm long cable. USB outputs: 4x SuperSpeed USB port, USB-A female connector. 1x USB type C Power Delivery port (only charging), USB-C female connector. Supports transmission rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 1 interface used (theoretically up to 5 Gbit/s). USB-C hub can handle the connection of several external drives at the same time. HDMI output: HDMI. HDMI A (F) female connector. Maximum supported resolution 4K / 4096 x 2160 at 30 Hz. WQHD resolution 2560 x 1440 at 60 Hz max. FullHD resolution 1920 x 1080 at 60, 100, 120 Hz max. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. At the same time, support from the device (laptop, phone) and the operating system is required. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Support up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio formats. Support sampling rate up to 192kHz and up to 24-bit audio depends on source and end device, i.e. laptop/phone and TV/monitor/ AV receiver. Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub. Maximum power supply power via PD USB-C hub output 100W - 20V/5A. Required PD support from the device (laptop, phone) and a suitable PD wall charger. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminum body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub operation is better dissipated and transferred to the surroundings. The backlight of the logo indicates with a permanent glow that the hub is connected to the computer. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions 110 x 35 x 12 mm. Weight 54 g (incl. cable). USB cable length 20 cm. Supported operating systems: Microsoft Windows 10 / 11, Mac OS, Linux, Android and Chrome OS. Compatibility depends on used OS and support from device manufacturer. Note 1: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed. Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Package contains: USB-C hub with fixed 20 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.
