Firma: Datagate

QOLTEC 51038 Power adapter for Huawei 65W 19V 3.42A 4.0x1.7 power cable

QOLTEC 51030 Power adapter for ultrabook HP 45W 19.5V 2.31A 4.5x3.0 pin

ICY BOX IB-DK2288AC Multi-Docking Station for Notebooks and PCs

ICY BOX IB-DK2416-C Multi-Docking Station for Notebooks and PCs

ICY BOX IB-DK4080AC USB Type-C Docking Station

EcoFlow PowerStream Microinverter. EcoFlow PowerStream Solar System is a balcony solar system with a portable power station that allows you to use solar energy day and night and reduce energy bills. EcoFlow Smart Plug and EcoFlow app enable real-time energy usage monitoring and optimization. This system stores all excess energy in a portable power station during the daytime and gives it back to you whenever you need it. With up to 1039kWh feeding into your home per year, you can save a maximum sum of 415€. And your energy bill savings are 3.5 times as much as that from using other home solar systems without batteries. Model name PowerStream Microinverter. Dimensions 242 x 169 x 33 mm, Weight 3 kg

ICY BOX IB-DK2246AC Multi-Docking Station for Notebooks and PCs

ICY BOX IB-DK2116-C Multi-Docking Station for Notebooks and PCs

ICY BOX IB-DK4060-CPD Multi-Docking Station for Notebooks and PCs

TomTom GO Expert Plus EU 7

QOLTEC 52395 Power adapter fo Asus 33W 19V 1.75A Special micro USB

I-TEC USB 3.0/USB-C/Thunderbolt 3 Dualdock 1x5K 2x4K 60Hz 2xDP 2xHDMI 1xGLAN 4xUSB 3.2 2xUSB-C 3.2 Gen.2 1xAudio/Mic Jack PD 100W KL

Frame size: 18 inches / Handlebar & Seat tube: Steel & Alloy / Chain: KMC Z7 / Front hub & Rear hub: Shimano FD-TZ500 & Shimano RD-TY300D / Gear-Brake lever: Shimano SF-EF41 21 Gear / Brake: Dacron V Breake Alloy / Rim: Dacron Double Wall / Tyre: Mitas Ocelot 29x2.10 / Accessories (not included): Chain housing, Front & Rear carrier, Front & Back lighting, Lock // Assembly: Bicycle comes in the original factory package, 85% assembled (front wheel, handlebars, seat, pedals might be removed and need installing). Tools for assembling the bicycle are not included in the package. Client is responsible for correct bicycle assembly, preparation for use and initial maintenance of the bicycle at any service centre (service record in the maintenance sheet/warranty card is mandatory). In case of violating this rule warranty will not be effective. Regarding the assembly of the bicycle we recommend to consult a qualified technician. Rocksbike AIM 1.2 Adults, MTB Wheel size 29", Number of speeds 21 Frame Alloy, Bicycle seat Dacron XML Mechanic Lockout Brakes Aluminium V-shaped, Front gears 3 Rear gears 7, Rear derailleur Shimano RD-TY300D Grey / Blue, Weight 16.2 kg

Frame size: 18 inches Handlebar & Seat tube: Alloy Chain: KMC Z33 Front hub & Rear hub: SF-HB10 (QR) & SF-HB 10 Gear-Brake lever: Dacron ST-40 21 Gear Brake: PROMAX V BRAKE ALLOY Rim: Dacron Double Wall Tyre: MITAS SEPIA 700X40C Accessories (not included): Chain housing, Front & Rear carrier, Front & Back lighting, Lock // Assembly: Bicycle comes in the original factory package, 85% assembled (front wheel, handlebars, seat, pedals might be removed and need installing). Tools for assembling the bicycle are not included in the package. Client is responsible for correct bicycle assembly, preparation for use and initial maintenance of the bicycle at any service centre (service record in the maintenance sheet/warranty card is mandatory). In case of violating this rule warranty will not be effective. Regarding the assembly of the bicycle we recommend to consult a qualified technician. Neutrone 5.1 Adults, MTB Wheel size 28", Number of speeds 21 Frame Alloy, Bicycle seat ZOOM 120 E-MLO Brakes Aluminium V-shaped, Front gears 3 Rear gears 7, Rear derailleur SHIMANO RD-TY300 TOURNEY Grey / Red, Weight 14.4 kg

GO Navigator 6’’ GO Navigator 6’’

KENSINGTON 100W USB-C GaN Charger for USB-C Power Passthrough Mobile Docking Stations & Hubs - EU Plug

KENSINGTON SD1700p USB-C Dual 4K Portable Docking Station with Qi Charging

KENSINGTON SD1650P Mobile USB-C Single 4K Docking Station with Power Charging

KENSINGTON MD120U4 USB4 & Thunderbolt 4 Portable Docking Station

I-TEC USB 3.0/USB-C/Thunderbolt Docking Station 2x HDMI 1x GLAN 2x USB 3.2 Gen.1 4x USB 2.0 1x Audio Jack 1x Mic Jack PD 85W KL

GO Superior Upgrade your drive Large HD touch screen Trusted TomTom world maps High performance and responsiveness Fast map updates via Wi-Fi NEW Enhanced Visual Cues NEW Avoid Low Emission Zones NEW USB-C Moving lane guidance

Frame size: 18 inches / Handlebar & Seat tube: Alloy / Chain: KMC Z33 / Front hub & Rear hub: SF-HB10 (QR) & SF-HB 10 / Gear-Brake lever: Dacron ST-40 21 Gear / Brake: PROMAX V BRAKE ALLOY / Rim: Dacron Double Wall / Tyre: MITAS SEPIA 700X40C / Accessories (not included): Chain housing, Front & Rear carrier, Front & Back lighting, Lock // Assembly: Bicycle comes in the original factory package, 85% assembled (front wheel, handlebars, seat, pedals might be removed and need installing). Tools for assembling the bicycle are not included in the package. Client is responsible for correct bicycle assembly, preparation for use and initial maintenance of the bicycle at any service centre (service record in the maintenance sheet/warranty card is mandatory). In case of violating this rule warranty will not be effective. Regarding the assembly of the bicycle we recommend to consult a qualified technician. Neutrone 5.1 Adults, MTB Wheel size 28", Number of speeds 21 Frame Alloy, Bicycle seat ZOOM 120 E-MLO Brakes Aluminium V-shaped, Front gears 3 Rear gears 7, Rear derailleur SHIMANO RD-TY300 TOURNEY Green / Grey, Weight 14.4 kg

Frame size: 18 inches / Handlebar & Seat tube: Steel / Chain: KMC Z33 / Front hub & Rear hub: SF-A210 QR & SF-A210 QR Bearing (Alloy) / Gear & Brake lever: Dacron ST-51 24 Gear & Sypo Hydraulic / Brake: Sypo DS01 Mechanic Disc / Rim: Dacron Double Wall / Tyre: Mitas Ocelot 27.5x2.10 / Accessories (not included): Chain housing, Front & Rear carrier, Front & Back lighting, Lock // Assembly: Bicycle comes in the original factory package, 85% assembled (front wheel, handlebars, seat, pedals might be removed and need installing). Tools for assembling the bicycle are not included in the package. Client is responsible for correct bicycle assembly, preparation for use and initial maintenance of the bicycle at any service centre (service record in the maintenance sheet/warranty card is mandatory). In case of violating this rule warranty will not be effective. Regarding the assembly of the bicycle we recommend to consult a qualified technician. Rocksbike Supreme 4.1 Adults, MTB Wheel size 27.5", Number of speeds 24 Frame Alloy, Bicycle seat Dacron XML 38.1 Brakes Mechanical disc brakes, Front gears 3 Rear gears 8, Rear derailleur Shimano RD-TY300 Tourney Black / Yellow, Weight 15.6 kg

IBOX IED03 EXTERNAL DVD-ROM WRITER

Satechi Triple 4K Display Docking Station on loodud nõudlikule kasutajale, kes hindab kvaliteeti ja mitmekülgseid ühendusvõimalusi. See dokk võimaldab ühendada kolm 4K60Hz videokuvaga ekraani korraga, luues muljetavaldava töö- või meelelahutuskeskkonna. Lisaks on sellel mitmekülgne valik porte, mis võimaldab rahuldada erinevaid ühendusvajadusi, olgu tegemist välise salvestusseadme, lisaseadme või võrguga ühendamisega. See on ideaalne töövahend professionaalidele ja loovatele inimestele, kes soovivad saavutada optimaalset tootlikkust ning nautida sujuvat multitegumtööd. • 2x DisplayPort 1.4 • 3x HDMI 2.0 • 1 Gigabit Ethernet port • USB-A ja USB-C pordid • Kuni 100W vooluedastus

A Solution Dedicated to YouReliability is crucial to you? Choose a Qoltec AC adapter dedicated to Samsung laptops. It is ideal for use at home or in the office, as a main or auxiliary power supply. It is made of the highest quality materials, and the technologies used in it will allow low power consumption and high efficiency. In the set you will find the power supply along with a velcro cable organizer, which will allow you to adjust the length of the cable to your needs.Safe power supply in a universal designThe power supply will ensure stable operation thanks to the manufacture of the highest quality materials and special protections:- Against overvoltage: protects against under- or over-voltage,- Against overloads: protects against overloading the power line,- Against short circuits: protects against short circuits in the power supply circuit,- Thermal: protects against damage caused by overheating. Fitting the power supply - we give a helping handMatching the right power supply to your laptop model is very important. The following points will dispel any doubts that may arise when choosing equipment: The basic parameters you will read from the label on the bottom of the laptop are: POWER (W), VOLTAGE (V), AMPERAGE (A).1. Power (W) - this number indicates the minimum value that a new power supply should have. Nothing prevents you from using a product with a higher wattage. This will put less load on it and, consequently, it will heat up less.2. Amperage (A) - here, as in the case of POWER, the value on the new power supply can be equal to or higher than that stated on the laptop's rating label.3. Voltage (V) - the number next to this parameter is more strictly required. Only a variation of +/- 0.5V is allowed.The last and equally important issue is the plug. Without it, not a move! Here there is no deviation, it is necessary that it is identical to the original. The size given means the outer diameter and the inner diameter of the pin. If a comparison based on the picture shown is not enough, it will be necessary to measure it, which will ultimately reassure you in your choice.

14in1, 2x Video 8K/30Hz, 3x USB 10GHz DA-70897 Dock Ethernet LAN (RJ-45) ports 1 DisplayPorts quantity 1 USB 2.0 ports quantity 3 HDMI ports quantity 1 Ethernet LAN

Multiport USB-C 10Gbps hub AXAGON HMC-6GM2 GEN2COMBO 6in1 expands your laptop, computer or phone with five ports and external box for M.2 disk. You can easily and quickly connect up two USB devices, SD card reader, one monitor, and an NVMe or SATA M.2 SSD to your computer via the reversible USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The USB-C hub will provide you with a simple and compact 6in1 docking station for notebook like MacBook Air or Pro. The USB hub offers two USB 10Gbps outputs. One with standard USB-A and one with USB-C data connector. The hub can also handle permanent connection of two external drives simultaneously. Thanks to the fast USB 3.2 Gen 2 interface, the hub's transfer rate is up to 10Gbps. Another USB-C connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI output provides high quality image up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port and above. You can connect a NVMe or SATA M.2 SSD drive thanks to the built-in slot on the back. The multiport hub thus becomes an external drive. M.2 cards can be single-sided or double-sided up to a size of 22x80 mm. The external M.2 box has no capacity limitations for SSDs and supports modern functions such as TRIM, UASP and enables reading S.M.A.R.T. disk status monitoring information. Card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. Thanks to the high-speed USB interface, you can make the most of the potential of modern memory cards. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. You will also be pleased with the finely textured surface, which does not leave fingerprints. The port replicator is the ideal accessory for laptops with a lack of USB connectors, memory or video outputs. Fixed USB-C cable 20 cm long. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input: USB 10Gbps (USB 3.2 Gen2). Compatible with Thunderbolt 3 and 4. Connection via reversible USB type C male connector on a fixed 20 cm cable. USB outputs: 1x USB 10Gbps port, USB-A female connector. 1x USB 10Gbps port, USB-C female connector. 1x USB Power Delivery 100W (only for charging), USB-C female connector. USB-C hub handle the connection of two external drives simultaneously. HDMI output: 1x HDMI A port, HDMI A female connector. Video resolution and properties: Maximum supported resolution 4K / 4096 x 2160 at 60 Hz. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Supports up to 8-channel LPCM audio, compressed audio (AC-3, DTS), and HBR audio formats. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub Maximum power supply power via PD USB-C hub output 100W - 20V/5A Required PD support from the device (laptop, phone) and a suitable PD wall charger The card reader - two slots: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash. SD slot: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x /4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. M.2 SSD slot: NVMe & SATA M.2 SSD disks. Designed for M key or B+M key format cards. NGFF 75-pin M-key slot for M.2 drives. Supports M.2 drives with a size of 2242, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Support of TRIM functionality to limit gradual degradation of the SSD performance over time. Support for booting from an SSD in the hub's M.2 slot. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0). Supports transmission rates 10.000 / 5.000 Mbit/s. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub and M.2 disk operation is better dissipated and transferred to the surroundings. The LED indicates the data transfer of the M.2 drive. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 149 x 65 x 17 mm. Weight 178 g (incl. cable). USB cable length 20 cm. Supported operating systems: Windows 10 / 11 and later, macOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 20 cm long cable mounting material multilingual manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA packed in a cardboard box

Multiport USB-C 10Gbps hub AXAGON HMC-12GM2 GEN2COMBO 12in1 expands your laptop, computer or phone with eleven ports and external box for M.2 disk. You can easily and quickly connect up to two monitors, four USB devices, a Gigabit Ethernet network, headphones, an SD card reader, and an NVMe or SATA M.2 SSD o your computer via the reversible USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The USB-C hub will provide you with a simple and compact 12in1 docking station for notebook like MacBook Air or Pro. The USB hub offers three USB outputs with standard USB-A connectors. Two with 5Gbps speeds and a third with 10Gbps speeds for more demanding devices. It also offers a USB-C 10Gbps data connector. The hub can also handle permanent connection of two external drives simultaneously. Thanks to the fast USB 3.2 Gen 2 interface, the hub's transfer rate is up to 10Gbps. The second USB-C connector is reserved only for powering and simultaneous charging of laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI and DisplayPort outputs provide a high-quality picture. Whether used alone or simultaneously, the ports offer resolutions up to 4K/60Hz Ultra HD and support multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port and above. You can connect a NVMe or SATA M.2 SSD drive thanks to the built-in slot on the back. The multiport hub thus becomes an external drive. M.2 cards can be single-sided or double-sided up to a size of 22x80 mm. The external M.2 box has no capacity limitations for SSDs and supports modern functions such as TRIM, UASP and enables reading S.M.A.R.T. disk status monitoring information. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card.Card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. Thanks to the high-speed USB interface, you can make the most of the potential of modern memory cards. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. Active cooling is provided by a silent integrated fan, which cools both the M.2 disk and the body of the hub itself. You will also be pleased with the finely textured surface, which does not leave fingerprints. The port replicator is the ideal accessory for laptops with a lack of USB connectors, memory or video outputs. The 50 cm USB-C cable is detachable and can be replaced with a longer cable if needed. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input: USB 10Gbps (USB 3.2 Gen2). Compatible with Thunderbolt 3/4. Connection via reversible USB type C female connector. USB outputs: 1x USB 10Gbps port, USB-A female connector. 2x USB 5Gbps port, USB-A female connector. 1x USB 10Gbps port, USB-C female connector. 1x USB Power Delivery 100W (only for charging), USB-C female connector. USB-C hub can handle the connection of two external drives simultaneously. Video outputs: 1x HDMI A port, HDMI A female connector. 1x DP port, DisplayPort female connector. Video resolution and properties: Maximum supported resolution when each port is connected individually is 4K / 4096 x 2160 at 60 Hz. 2 simultaneously connected monitors - up to 4K/60Hz on both monitors. For proper video output function, the hub must be plugged into a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) version 1.4 or higher, or a USB-C port with Thunderbolt 3/4 support. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Supports up to 8-channel LPCM audio, compressed audio (AC-3, DTS), and HBR audio formats. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub. Maximum power supply power via PD USB-C hub output 100W - 20V/5A. Required PD support from the device (laptop, phone) and a suitable PD wall charger. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x / 4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. Copying from card to card. M.2 SSD slot: NVMe & SATA M.2 SSD disks. Designed for M key or B+M key format cards. NGFF 75-pin M-key slot for M.2 drives. Supports M.2 drives with a size of 2242, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Support of TRIM functionality to limit gradual degradation of the SSD performance over time. Support for booting from an SSD in the hub's M.2 slot. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mbit/s auto-detection. Supports IPv4 / IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Support IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminats the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN function in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, ECMA-393 proxZzzy for sleeping hosts, RealWoW! and also Link Change Wake-up. Advanced Power Management features: The adapter supports advanced power management and supports advanced power saving e.g. when the Ethernet cable disconnection. Supported Power Management technologies are e.g. Advanced Configuration Power management Interface (ACPI), Link Power Management (LPM) or IEEE 802.3az EEE (Energy Efficient Ethernet) and others. Audio output / input: 1x 3.5 mm jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel analog mono microphone input 48 kHz @ 16 bit for recording. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0). Supports transmission rates 10.000 / 5.000 Mbit/s. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub and M.2 disk operation is better dissipated and transferred to the surroundings. The LED indicates the data transfer of the M.2 drive. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 149 x 65 x 17 mm. Weight 178 g (incl. cable). USB cable length 50 cm. Supported operating systems: Windows 10 / 11 and later, macOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub USB-C cable 50 cm long mounting material multilingual manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA packed in a cardboard box

USB hub with versatile connectivity options, high speed of up to 5 Gbps, powerful Power Delivery feature, support for 8K/30Hz and 4K/120Hz, compatibility with various operating systems

Metal USB 3.2 Gen 1 (USB 3.0) multi-port hub AXAGON HMA-GL3AP connects up to three USB devices to laptop or computer and also adds Gigabit network card which connects your computer to high speed network. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks can be connected to a computer, laptop, tablet or smartphone. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5Gb/s. The Gigabit network adapter expands the computer with a fast and stable network connection, adds the missing RJ-45 network connector or adds another network card.The LAN adapter is compatible with 10/100/1000 Mbit/s speed and also offers a wide range of features, such as IPv4/IPv6 checksum to reduce CPU load by checksums, the crossover detection and auto-correction, TCP large send offload, support for various modes of the Wake-on-LAN feature, the work with virtual LAN (VLAN) and advanced Power Management features. In modern operating systems from Windows 8.1 above, the adapter allows easy automatic installation without the need for an Internet connection. The port replicator is the ideal accessory for ultrabooks with a small number of USB-A ports and without network card. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Some phones and tablets with the Android operating system, such as the Samsung S9 +, can be connected to the Internet with a network Ethernet cable with suitable adapter* thanks to this hub. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 20 cm long cable. Output: 3x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. RJ-45 Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mbit/s auto-detection. Supports IPv4 / IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminates the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN feature support in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection and Link Change Wake-up. Supports ECMA-393 proxZzzy standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers. RealWoW! technology support allows remote wake up over the Internet. Advanced Power Management features:The adapter supports advanced power management to reduce losses during standby or light traffic on the network. It further supports advanced power saving when the Ethernet cable has been disconnected. Supports Advanced Configuration Power Management Interface (ACPI). Supports Power Management offload (ARP & NS). Supports Microsoft Always On Always Connected (AOAC). Supports Intel Converged Platform Power Management (CPPM). Supports Link Power Management (LPM). Supports Operating System-directed Power Management (OSPM). Supports IEEE 802.3az EEE (Energy Efficient Ethernet). Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. White LED indicates the connection to the computer's USB port. Two LEDs near Ethernet port indicates network cable connection (green) and the network activity (orange). Dimensions 96 x 35 x 18 mm. Weight 53 g (incl. cable). USB cable length 20 cm. Power / Charging: Powering through USB bus (USB bus power) is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. The USB hub can also handle the permanent connection of several external drives simultaneously. Integrated micro USB connector for additional powering the hub (USB Self power) which can be used for connection of several external disks. In this power mode, the USB hub is also able to work with up to three magnetic 2.5" external disks simultaneously. Any mobile device wall charger (not included) with micro USB connector can be used for additional powering the hub. Charging mobile devices with current up to 1.2A in each of the hub ports (USB bus power). The total charging current (which is divided into ports) reaches up to 3A at 5V (Self power - 2A / 5V adapter).

The Acer notebook power supply from Mitsu is equipped with a ferrite filter and excellent protection against overvoltage, overheating, overload and overcharging. Acer laptop chargers are aimed at the most demanding users, who appreciate stress-free and comfortable work. The quality of the product is confirmed by the following certificates: CE, ROHS, FCC and strict quality control eliminating possible defects.QUALITY BEFORE EVERYTHING Temperature resistance - The influence of high and low temperatures on the resistance of the protection systems and the electrical parameters of the PSU is tested. Electrical test - Testing the correctness of electrical connections between individual components of the PSU. Short-circuit and over-voltage test - The reaction of the PSU protection systems due to a short circuit and a sudden voltage jump simulated by supplying a high-voltage pulse at the input of the PSU is tested. Final test - The output voltage level of the UPS is tested by subjecting it to an hour-long continuous load. The set includes a power cord, warranty card and instruction manual.How to choose the right power supply?The DC supply parameters (direct current DC) are usually given under the laptop on the sticker after the INPUT sign The voltage V (volts) of the power supply should match the value given on laptop A current (amps) should be equal to or greater than the value on the laptop, this parameter means the maximum current that is allowed load the power supply, the laptop decides about the size of the load W power (watts) is the result of the multiplication of voltage and current The shape and size of the plug should be compared with the picture offeredcthe item and dimensions of the plug given in the description; we can alsodetermined on the basis of the PSU manufacturer's database

RELIABLE POWER FROM A LIGHTWEIGHT, PORTABLE ADAPTER The ROG AC100-00 is a 100W AC Adapter with a USB Type-C (USB-C) connector and is designed for ROG laptops that support charging via USB-C. It supports international voltage standards (100-240V, 50-60Hz), and includes USB Power Delivery (PD) 3.0 technology that automatically detects and supplies 5V/3A, 9V/3A, 15V/3A and 20V/5A. EASY USB TYPE-C CHARGING 100W output via USB-C automatically supplies the right current and voltage, and the 160cm cable and 100-240V input give you portable flexibility in a lightweight package. MULTIPLE SAFETY PROTECTION Multiple output protection, including Over Voltage Protection (OVP), Over Current Protection (OCP), Over Temperature Protection (OTP) and Short Circuit Protection (SCP) are built-in to keep you and your laptop safe.

The AXAGON ACU-DPQ100 GaN travel wall charger enables fast charging of up to three mobile devices at the same time. With 100W of total power, the charger charges notebooks, phones and other mobile devices at the highest possible speed. The adapter offers a standard USB-A connector, but also two double-sided USB-C connectors. Compact size and high performance is given by the new GaN technology used. The components used with Galium Nitride work with high efficiency, which allows you to achieve high performance with a small size. The charger is equipped with two Power Delivery 3.0 / Quick Charge 4+ USB Type-C outputs and one Quick Charge 3.0 USB Type-A output, enabling fast charging of not only smartphones and tablets, but also laptops. The Quick Charge 4+ technology allows up to 4 times faster charging of phones than a standard USB charger. Power Delivery 3.0 technology not only supports charging of modern phones, but also enables 100W PD charging of powerful laptops. The charger supports 20W PD charging.

Superspeed USB-C 3.2 Gen 2 hub AXAGON HMC-5G2 SPEEDSTER 5H expands your laptop, computer or phone with five ports. You can easily and quickly connect up to four USB devices and HDMI display to your computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The hub will provide you with a simple and compact laptop docking station. The USB hub offers a total of four USB outputs - two with standard USB-A connectors and two with modern USB-C connectors. Thanks to the advanced USB 3.2 Gen 2 interface, you can connect high-speed devices such as NVMe M.2 external drives to all outputs at up to 2x higher speed 10 Gb/s compared to standard Generation 1 hubs with a speed of only 5 Gb/s. The hub can handle permanent connection of several external drives simultaneously and USB-C ports allow charging of phones and tablets with a current of up to 3A. One of the USB-C ports also allows you to use the Power Delivery function to power up a laptop or mobile phone via hub from a charger. Connect the USB-C Power Delivery charger to the hub and connect the hub to the laptop. This saves one port, which could be useful. The condition is a laptop with Power Delivery charging support from the USB-C port and a suitable PD charger. HDMI output provides high quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. The compact and slim aluminum body looks great and also ensures mechanical resistance and quality cooling. The finely structured surface with no fingerprint remains will also please you. The USB-C hub is an ideal accessory for laptops without USB-A connectors and video output such as the MacBook Pro. You can use your existing USB peripherals without having to buy new ones. Thanks to the Plug and Play and Hot Plug functions, the connection of the hub itself is very simple without complicated installation. It is also possible to easily connect and disconnect peripherals while the computer is running. The hub does not afraid of connection to phones with a USB-C connector - for example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input: 1x USB 3.2 Gen 2 / SuperSpeed USB 10 Gbps port, USB-C male connector. Backward compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0 and USB 2.0. Compatible with Thunderbolt 3. Input USB type C male connector on fixed 13cm cable. USB outputs: 2x SuperSpeed USB 10 Gbps port, USB-A female connector. 1x SuperSpeed USB 10 Gbps port, USB-C female connector. 1x SuperSpeed USB 10 Gbps port for data transfer or Power Delivery charging, USB-C female connector. Supports transmission rates 10.000 / 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ / SuperSpeed / High / Full / Low speed). The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). USB-C hub can handle connection of several external drives simultaneously. Powerful mobile device charging in the USB-C ports by current up to 3A. HDMI output: HDMI. HDMI A (F) female connector. Maximum supported resolution 4K / 4096 x 2160 at 30 Hz. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Correct OS is also necessary. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signaling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Up to 8-channel LPCM audio, compressed audio (AC-3, DTC) and HBR audio format support. Sample rate up to 192 kHz and 24 bit audio support depends on source and target device i.e. notebook/phone and TV/display/AV receiver. Power Delivery: Power Delivery 3.0 support device power supply from the PD wall charger via USB-C hub. Maximum power supply power via PD USB-C hub output 60W - 20V/3A. Notebook or phone with Power Delivery charging support from the USB-C port and a suitable PD charger is necessary. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub operation is better dissipated and transferred to the surroundings. Blue LED indicates computer USB port connection (steady light) or connection to Power Delivery charger (brighter light) High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 105 x 40 x 12 mm. Weight 60 g (incl. cable). USB cable length 13 cm. Supported operating systems: Microsoft Windows 10, Mac OS, Linux, Android and Chrome OS.Compatibility depends on used OS and support from device manufacturer. Note 1: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed. Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Package contains: USB-C hub with fixed 13 cm long cable, printed installation guide in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.

Multiport USB-C 3.2 Gen 1 hub AXAGON HMC-6H4A expands your laptop, computer or phone with six ports. You can easily and quickly connect up to four USB devices and HDMI display to your computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology. The USB-C hub will provide you with a simple and compact 6in1 docking station for notebook like MacBook Pro. The USB hub offers four USB outputs with standard USB-A connectors. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. USB-C connector is dedicated to power up a mobile phone or laptop using Power Delivery 3.0 technology by power up to 100W. Connect the USB-C Power Delivery charger to the hub and connect the hub to the laptop. This saves one USB-C port. The condition is a laptop with Power Delivery charging support from the USB-C port and a suitable PD charger. HDMI output provides high quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. Popular gaming resolution WQHD 2560 x 1440px at 60Hz or FullHD 1920 x 1080px at 60, 100 and 120Hz max. are also supported. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Elegant aluminum body ensures mechanical resistance and quality cooling. The glossy upper part with a decent backlit logo underlines the premium look of the hub. Port replicator is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. You can connect a flash drive, keyboard, mouse, monitor, TV or projector to your phone. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0. Compatible with Thunderbolt 3. Connecting USB type C male connector on a fixed 20cm long cable. USB outputs: 4x SuperSpeed USB port, USB-A female connector. 1x USB type C Power Delivery port (only charging), USB-C female connector. Supports transmission rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 1 interface used (theoretically up to 5 Gbit/s). USB-C hub can handle the connection of several external drives at the same time. HDMI output: HDMI. HDMI A (F) female connector. Maximum supported resolution 4K / 4096 x 2160 at 30 Hz. WQHD resolution 2560 x 1440 at 60 Hz max. FullHD resolution 1920 x 1080 at 60, 100, 120 Hz max. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. At the same time, support from the device (laptop, phone) and the operating system is required. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Support up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio formats. Support sampling rate up to 192kHz and up to 24-bit audio depends on source and end device, i.e. laptop/phone and TV/monitor/ AV receiver. Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub. Maximum power supply power via PD USB-C hub output 100W - 20V/5A. Required PD support from the device (laptop, phone) and a suitable PD wall charger. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminum body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub operation is better dissipated and transferred to the surroundings. The backlight of the logo indicates with a permanent glow that the hub is connected to the computer. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions 110 x 35 x 12 mm. Weight 54 g (incl. cable). USB cable length 20 cm. Supported operating systems: Microsoft Windows 10 / 11, Mac OS, Linux, Android and Chrome OS. Compatibility depends on used OS and support from device manufacturer. Note 1: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed. Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Package contains: USB-C hub with fixed 20 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.