 Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 with Backplate (Reference) Tootekood: 11934 Jahutid ja lisad The Alphacool Aurora Acryl GPX-N RTX 3070 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3070 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3070 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3070 Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3070 Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3070 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3070 Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate - The Founders Edition, does NOT correspond to the Reference Design! Technical data: L x W x B: 122 x 239 x 25 mm Material cooler: Nickle plated copper Material top: Acryl Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards Compatibility list: More compatible models will follow in this list for this cooler. We are currently checking other PCB designs from various manufacturers! RTX 3070 - INNO3D GeForce RTX 3070 iCHILL X3, 8GB GDDR6, HDMI, 3x DP (C30703-08D6X-1710VA38) - INNO3D GeForce RTX 3070 iCHILL X4, 8GB GDDR6, HDMI, 3x DP (C30704-08D6X-1710VA35) Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 with Backplate (Reference) Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 with Backplate (Reference) | 1 | 76,20 € | Vaata | ||
 Corsair CPU Cooler iCUE H150i ELITE CAPELLIX XT AiO 360mm Liquid CPU Cooler, Black The CORSAIR iCUE H150i ELITE CAPELLIX XT Liquid CPU Cooler provides powerful, high-performance cooling for your processor, with CORSAIR AF RGB ELITE fans, a 360mm radiator, and ultra-bright CAPELLIX LEDs. | Laos | 21 | 199,90 € | Vaata | |
 Alphacool CPU Cooler Core Storm 240mm XT45 water cooling Set Tootekood: 11989 Jahutid ja lisad With the Core Storm water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Due to the included quick-release fastener, additional components like radiators or GPU coolers can be integrated afterwards without having to drain or rebuild the water loop.Eisblock XPX Aurora CPU CoolerAlphacool's Eisblock XPX Aurora CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRGB LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel.Core 100 Aurora Reservoir & VPP Apex PumpThe Core reservoir combines performance with design. The reservoir tube is made of acrylic, while the D5/VPP pump top and lid are made of acetal. The combination of these two materials gives the expansion tank a subtle appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. The pump's speed can be read out via the 4-pin fan connector and controlled via PWM signal. The Apex VPP is supplied with power via a SATA connector.NexXxoS XT45 Full Copper 240mm Radiator V.2All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS XT45 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop.Rise Aurora 120mm fansThe fans can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m3/h) coupled with high static pressure (3.17mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 20 digitally addressable 5V RGB LEDs that illuminate the entire fan.AlphaTube HF 13/10mm tubing & HF G1/4" quick connect couplingThe clear 13/10mm hose made of PVC offers comfortable handling when routing and connecting water cooling components. It has good routing and kinking characteristics and allows uncomplicated bridging of tight bend radii. The HF quick-connect coupling included in the scope of delivery allows easy integration of further components at a later date without having to drain or rebuild the water loop.Eiszapfen 13/10mm G1/4" ConnectionsAll the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off.Thermal Paste & CoolantThe included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle.aRGB Controller, Cables, Tools & AccessoriesAll cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like hose cutter, filling bottle and an ATX 24-pin jumper. Thus, the construction of the custom loop can be started "out-of-the-box" immediately. Compatibility:Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 2011 / 2011-3 / 2066 / 1700AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5 Technical data CPU coolerDimensions (L x W x H)75,8 x 75,8 x 33mmMaterial coolernickel-plated copperMaterial housingnylon, acrylicThreads2 x G1/4“Illumination3-Pin 5V, 15 digital aRGB LEDsMax working temperature60°CPressure tested0,8 BarTechnical data reservoirDimensions (L x W x H)131 x 76,5 x 76,5mmCapacity200 mlMaterial Pump top & coveracetalMaterial tubeacrylicThreads3x G1/4“ ITIllumination3-Pin 5V, 12 digital aRGB LEDsMax working temperature60°CPressure tested0,8 BarTechnical data pumpDimensions (L x W x H)65 x 65 x 41mmMaterialsynthetic material, aluminium, ceramicsThreads4-Pin PWM | SATARotational speed2500 - 4500 RPMOperating voltage8-13V DC / 14W IP32Starting voltage12V DCMaximum pumping head4,25mMaximum flow rate340L/hMax working temperature60°CPressure tested0,8 BarTechnical data radiatorDimensions (L x W x H)271,5 x 124 x 45mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4"Possible fan size120mmPossible fan assembly2x one-sided / 4x both-sidedFin density12Max working temperature60°CPressure tested0,8 BarTechnical data fanDimensions (L x W x H)120 x 120 x 25mmSpeed0 - 2500 RPM (+/- 10%)Threads4-Pin PWMVoltage12V DCCurrent consumption0,65A (0,72 max)Static pressure3,17 mm H2OMax. air flow118,9 m³/hNoisemax. 31,5 dB(A)Speedometer signalyesAuto-RestartyesIllumination3-Pin 5V, 20 digital aRGB LEDs, 3.5WTechnical data tubeDimensions (outer/inner)13/10mmMaterialPVCLength3mColorclearTechnical data 13/10mm G1/4" fittingsMaterialbrassThreads1x G1/4" OT | 1x tube connection 13/10mmColorblackTechnical data quick release couplingDimensions (L x D)60,3 x 26,1mmMaterialsynthetic materialThreads2x G1/4“ ITColorblackTechnical data coolantIngredientsosmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%)Boiling point105°CFreezing point-10°CPackaging unit1L bottleColorclear (not UV-active)Technical thermal greaseViscosity (mPa. s)3.000.000Specific Gravity (g/cm³)2,7Thermal Conductivity (w/m-K)16Temperature Stability (Degree Celcius)-50 ~ 200Colorgray | 1 | 288,90 € | Vaata | ||
 be quiet! Fan Pure Wings 3 120 mm (BL104) be quiet! Pure Wings 3 120mm. Tüüp: Ventilaator, Ventilaatori läbimõõt: 12 cm, Pöörlemiskiirus (max): 1600 RPM, Müratase (suur kiirus): 25,5 dB, Maksimaalne õhuvool: 49,9 cfm, Õhuvool: 84,8 m³/h, Maksimaalne õhusurve: 1,45 mmH2O. ... | Laos | 29 | 10,36 € | Vaata | |
 be quiet! Lüfter 120*120*25 Pure Wings 3 PWM (BL105) be quiet! Pure Wings 3 120mm PWM. Tüüp: Ventilaator, Ventilaatori läbimõõt: 12 cm, Pöörlemiskiirus (max): 1600 RPM, Müratase (suur kiirus): 25,5 dB, Maksimaalne õhuvool: 49,9 cfm, Õhuvool: 84,8 m³/h, Maksimaalne õhusurve: 1,45 ... | Laos | 30 | 10,36 € | Vaata | |
 be quiet! Fan Pure Wings 3 120mm PWM high-speed (BL106) be quiet! Pure Wings 3 120mm PWM high-speed. Tüüp: Ventilaator, Ventilaatori läbimõõt: 12 cm, Pöörlemiskiirus (max): 2100 RPM, Müratase (suur kiirus): 30,9 dB, Maksimaalne õhuvool: 59,6 cfm, Õhuvool: 101,2 m³/h, Maksimaalne ... | 1-3 tp | 25 | 10,36 € | Vaata | |
 be quiet! Fan Pure Wings 3 140mm (BL107) be quiet! Pure Wings 3 140mm. Tüüp: Ventilaator, Ventilaatori läbimõõt: 14 cm, Pöörlemiskiirus (max): 1200 RPM, Müratase (suur kiirus): 21,9 dB, Maksimaalne õhuvool: 57,4 cfm, Õhuvool: 97,5 m³/h, Maksimaalne õhusurve: 0,96 mmH2O. ... | Laos | 26 | 11,58 € | Vaata | |
 Alphacool Eisblock Aurora Acryl GPX-N RTX 3090 Founders Edition with Backplate The Alphacool Aurora Acryl GPX-N RTX 3090 FE Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3090 FE graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3090 FE cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3090 FE Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3090 FE Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3090 FE also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3090 FE Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate - The Founders Edition, does NOT correspond to the Reference Design! Technical data: L x W x B: 120,7 x 231,5 x 29,2 mm Material cooler: Nickle plated copper Material top: Acryl Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards Compatibility list: - NVIDIA GeForce RTX 3090 FE Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3090 FE with Backplate Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3090 FE with Backplate | 4 | 85,40 € | Vaata | ||
 | |||||
 Alphacool Eisblock Aurora Geforce RTX 4070 TI Eagle OC with Backplate Tootekood: 13729 Jahutid ja lisad Alphacool stellt die neuste Generation des Eisblock Aurora Wasserkühlers für Geforce RTX 40XX Grafikkarten vor. Der Wasserkühler wurde optimiert, um die enormen Abwärme-Eigenschaften dieser Grafikkartengeneration bestmöglich abzuführen. Die Finnenstruktur wurde angepasst und die Düsenplatte modifiziert, um einen besseren Wasserdurchfluss und eine optimale Verteilung des Wassers auf den Kühlfinnen zu ermöglichen. Technische Highlights Die Finnendicke dieser Eisblock-Kühlergeneration beträgt 0,4 mm, ebenso wie der Abstand der Kühlfinnen zueinander. Die Düsenplatte verfügt über ein überarbeitetes Inlay, das den Wasserdruck besser auf die Finnen verteilt und die Wärmeaufnahme optimiert. Der angepasste Wasserzufluss verhilft dem Wasser zu einem besseren Einströmwinkel. Verchromtes Kupfer Der Kühlerboden besteht vollständig aus verchromtem Kupfer, was unempfindlicher gegenüber Säuren, Kratzern und Schäden ist als eine Vernickelung. Verchromte Kühler wurden bisher nur im Industriesektor eingesetzt, um extreme Einflüsse auf die Kühler zu bewältigen. Zusätzlich sieht die Verchromung wesentlich homogener aus und bietet einen Glanz, der durch eine Vernickelung nicht erreicht werden kann. Design Das Aurora-Design der Geforce RTX 40XX Eisblock-Generation ist optisch ruhiger und schlichter. Der Kühler wird von einem einzigen O-Ring umschlossen. Die Konstruktion rund um die Kühlfinnen und der Jetplate sorgt für eine klarere Optik. Die Beleuchtung der digital adressierbaren RGB-LEDs wird dank der Verchromung noch besser im Kühler verteilt. Das Terminal entspricht in seiner Formgebung dem klassischen Aurora Design. Wärmeleitpaste & Wärmeleitpads Im Lieferumfang ist Alphacool's Subzero Wärmeleitpaste enthalten, die zu den leistungsstärksten Wärmeleitpasten auf dem Markt gehört. Zusätzlich werden Alphacool Soft Pads mit einer Dicke von 1 mm für die Spannungswandler und den Grafikspeicher verwendet. Die Pads für die Rückseite des PCB sind 3 mm dick. Die Wärmeleitfähigkeit der Pads liegt bei 7 W/mK bzw. 3 W/mK. Das elektrisch nicht leitende Thermal Grease ist besonders gut geeignet für hohe Anpressdrücke und lässt sich aufgrund der Viskosität von 850.000 TF trotzdem perfekt verarbeiten. Kompatibilität: - GIGABYTE GeForce RTX 4070 Ti Eagle 12G, 12GB GDDR6X, HDMI, 3x DP (GV-N407TEAGLE-12G) - GIGABYTE GeForce RTX 4070 Ti Eagle OC 12G, 12GB GDDR6X, HDMI, 3x DP (GV-N407TEAGLE OC-12G) - GIGABYTE GeForce RTX 4070 Ti Gaming OC 12G, 12GB GDDR6X, HDMI, 3x DP (GV-N407TGAMING OC-12GD) Technische Daten Kühler Abmessungen (L x B x H) 176,60 x 134,00 x 34,40mm Material Kühlerboden verchromtes Kupfer Material Kühleroberseite Acryl Anschlüsse 4 x G1/4" Dicke Kühlfinnen 0,4mm Abstand Kühlfinnen 0,4mm Beleuchtung digital aRGB LEDs Stromanschluss digital aRGB LEDs 3-Pin JST Spannung digital aRGB LEDs 5V Anzahl digital aRGB LEDs 13 Farbe transparent Technische Daten Backplate Abmessungen (L x B x H) 176,60 x 109,50 x 6mm Material Aluminium Farbe schwarz | 1 | 155,50 € | Vaata | ||
 be quiet! Fan Pure Wings 3 140mm PWM (BL108) be quiet! Pure Wings 3 140mm PWM. Tüüp: Ventilaator, Ventilaatori läbimõõt: 14 cm, Pöörlemiskiirus (max): 1200 RPM, Müratase (suur kiirus): 21,9 dB, Maksimaalne õhuvool: 57,4 cfm, Õhuvool: 97,5 m³/h, Maksimaalne õhusurve: 0,96 ... | Laos | 30 | 11,58 € | Vaata | |
 Alphacool Eisblock Aurora Acryl GPX-N RTX 3090TI Founders Edition with Backplate Tootekood: 13056 Jahutid ja lisad The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Compatibility: - NVIDIA GeForce RTX 3090 Ti Founders Edition Technical data cooler L x W x H 220,5 x 146,40 x 23,35 mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 11 Maximum working temperature 60 °C Pressure tested 0,8 Bar Technical data backplate L x W x H 220 x 121,4 x 6 mm Material aluminium Color black | 1 | 90,60 € | Vaata | ||
 RivaCase COOLING PAD 17.3"/5557 - sülearvutialus This dual use laptop cooling pad, designed for usage on both your lap and your desk will ensure that you can continue to work comfortably no matter where you are, no matter how long you’ve been working. Built-in USB pass-through connection provides expanded connectivity. Your work station will be both a pleasant and convenient working environment. • Designed for dual usage : on lap or on desk • Fit up to 17.3’’ laptops • 2 silent fans • USB power source • Front anti-skid arm • Nonslip feet • USB hub • Fan speed : up to 1100 rpm • Fan diameter: 110 mm Option for Models Fit up to 17.3’’ laptops USB, Colour Black | 1-3 tp | 19 | 20,99 € | Vaata | |
 XILENCE CPU Cooler LQ240PRO XC982 The all-in-one water cooling system LQ240PRO is the ideal companion for gaming adventures with the highest performance requirements. With a TDP of 300 watts, it is able to cool even very hot CPUs without performance loss. The assembly is simple and fast due to the quick-mounting system. All current CPUs from AMD and Intel are supported. The design of the water cooler is kept in a noble, black metallic look. The square pump head with a large, powerful copper cooling plate and discreet ARGB lighting fits perfectly into the picture and looks stylish. The elegantly sheathed, flexible black hoses can be comfortably routed in the housing in any mounting form. The fans of the LQ240PRO are equipped with Fluid Dynamic Bearing technology (FDB) and ensure smooth operation despite heated gaming sessions. Only a barely perceptible whisper of the cooling airflow is heard. The embossed logo of the fans emphasizes the metallic look and underlines the elegance of the water cooling. Available as black 240mm version with ARGB illuminated pump head and 2x FDB fans. *Optionally, ARGB fans (XPF120.ARGB | XF063) can be mounted on the radiator instead LQ240PRO Liquid, SA/SAM4/SAM5 Fan speed 500 - 1500 rpm, Air flow 63.41 cfm Noise level, max 25 dB, Dimensions 274 x 120 x 27mm Colour Black, Weight 2 kg | 1-3 tp | 30 | 73,71 € | Vaata | |
 be quiet! Fan Pure Wings 3 140mm PWM high-speed (BL109) be quiet! Pure Wings 3 140mm PWM high-speed. Tüüp: Ventilaator, Ventilaatori läbimõõt: 14 cm, Pöörlemiskiirus (max): 1800 RPM, Müratase (suur kiirus): 30,5 dB, Maksimaalne õhuvool: 72,2 cfm, Õhuvool: 122,6 m³/h, Maksimaalne ... | 1-3 tp | 27 | 11,58 € | Vaata | |
 Alphacool Eisblock Aurora Acryl GPX-N RTX 3090 TI FTW3 Ultra with Backplate The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Technical data cooler L x W x H 290 x 151 x 24mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Maximum working temperature 60 °C Illumination 11x Digital RGB LEDs Power connector Digital RGB LEDs 3-Pin JST Power Digital RGB LEDs 5V Technical data backplate L x W x H 290 x 125 x 6mm Material aluminium Color black Compatibility: EVGA GeForce RTX 3090 Ti FTW3 Ultra Hydro Copper Gaming (24G-P5-4989-KR) EVGA GeForce RTX 3090 Ti FTW3 Ultra Hybrid Gaming (24G-P5-4988-KR) EVGA GeForce RTX 3090 Ti FTW3 Ultra Gaming (24G-P5-4985-KR) EVGA GeForce RTX 3090 Ti FTW3 Gaming (24G-P5-4983-KR) EVGA GeForce RTX 3090 Ti FTW3 Black Gaming (24G-P5-4981-KR) | 2 | 90,60 € | Vaata | ||
 XILENCE CPU Cooler M906 XC081 Our new flag ship in the field of air cooling from the performance X series - the M906 It has six extremely powerful black heat pipes, which dissipate 250W of waste heat to the countless cooling fins and thus predestine it for potent multi-core processors. Due to the direct contact of the heat pipes, the heat transfer between CPU and cooler is extremely efficient and very even. The multi-socket means that the cooler can be used on all current Intel and AMD sockets. In addition to the double heat sink and the PWM-controlled 120mm FDB Xilent fan, the scope of delivery includes a holding module for the LGA socket 1700/2066/2011/1200/1151/1150/1155/1156 / and AMD AM4/AM5, illustrated assembly instructions and a tube of thermal paste. M906 Liquid, SA/SAM4/SAM5 Fan speed 500 - 1500 rpm, Noise level, max 30.8 dB Dimensions 129 x 106 x 154mm, Colour Black Weight 0.905 kg | 1-3 tp | 28 | 46,44 € | Vaata | |
 be quiet! Pure 2 FX 280 mm CPU Cooler BW014 Pure Loop 2 FX 280mm is the impressively high-performing and silent All-in-One water cooling unit with impressive ARGB illumination for slightly overclocked systems. Impressively high cooling performance for all consumer CPUs 2 Light Wings 140mm PWM high-speed fans offer equally high air pressure and vibrant ARGB illumination Doubly decoupled PWM pump for quiet operation and minimal vibration ARGB-PWM-Hub enables synchronization of up to 6 ARGB components and PWM fans Combination of ARGB illumination, all-black design and aluminum-style for unmistakable and stylish look Easy-to-access refill port and included coolant bottle guarantee a long lifespan PURE LOOP 2 FX 280mm Liquid, LGA1150/LGA1151/LGA1155/LGA1200/LGA1700/LGA2011-3/LGA2066/SAM4/SAM5 Fan speed 2200rpm, Fan light Noise level, max 32.8 dB, Dimensions 317 x 140 x 52mm Weight 1.29 kg | Laos | 34 | 123,54 € | Vaata | |
 Lian Li SL-INFINITY Arvuti korpus Ventilaator 12 cm Valge 1 tk 120-mm-PWM-Lüfter von Lian Li, einzigartiges Stecksystem für weniger Kabelsalat, mit adressierbaren RGB-LEDs, Unendlichkeitsspiegeleffekt an Seite und Front, max. 2.100 U/min, max. 104 m³/h Fördervolumen, max. 2,66 mmH2O statischer Druck | 9 | 29,50 € | Vaata | ||
 EK Water Blocks EK-Quantum Momentum2 ASUS ROG Maximus Z790 Dark Hero D-RGB - acrylic Vernickelter Kombi-Wasserkühler (CPU & VRAM), für das ASUS ROG Maximus Z790 Dark Hero, mit adressierbarer D-RGB-Beleuchtung, mit Velocity²-Engine für optimierten Durchfluss | 5 | 254,20 € | Vaata | ||
 EK Water Blocks EK-Quantum Momentum2 VRM Bridge ROG Maximus Z690 Formula white Upgrade Kit Umrüstset für den EK-Quantum Momentum² ROG Maximus Z690 Formula, Ändert Frabe zu weiß, Macht den Block mit dem ROG Maximus Z790 Formula kompatibel | 5 | 42,80 € | Vaata | ||
 Alphacool Eiswolf 2 AIO - 360mm RTX 3090 TI Founders Edition with Backplate The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Compatibility: - NVIDIA GeForce RTX 3090 Ti Founders Edition Technical data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump L x W x H 220,5 x 156,05 x 46mm Material cooler bottom Nickel plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95m Maximum flow rate 75 L/h Voltage 12V DC Power consumption 4W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners L x D 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25mm Net weight 187g Max working temperature 60°C | 2 | 130,05 € | Vaata | ||
 be quiet! CPU Cooler Pure Loop 2 FX 120 mm BW015 Pure Loop 2 FX 360mm is the impressively high-performing and silent All-in-One water cooling unit with impressive ARGB illumination for overclocked systems. Impressively high cooling performance for all consumer CPUs 3 Light Wings 120mm PWM high-speed fans offer equally high air pressure and vibrant ARGB illumination Doubly decoupled PWM pump for quiet operation and minimal vibration ARGB-PWM-Hub enables synchronization of up to 6 ARGB components and PWM fans Combination of ARGB illumination, all-black design and aluminum-style for unmistakable and stylish look Easy-to-access refill port and included coolant bottle guarantee a long lifespan PURE LOOP 2 FX 360mm Liquid, LGA1150/LGA1151/LGA1155/LGA1200/LGA1700/LGA2011-3/LGA2066/SAM4/SAM5 Fan speed 2500rpm, Fan light Noise level, max 34 dB, Dimensions 397 x 120 x 52mm Weight 1.54 kg | 1-3 tp | 27 | 140,54 € | Vaata | |
 Noctua NH-U9S Chromax Black Kompakter CPU-Kühler in Schwarz, mit asymmetrischem Design für höhere Kompatibilität, 92 mm großer PWM-Lüfter, 5 Heatpipes | 1-3 tp | 24 | 84,28 € | Vaata | |
 Noctua CPU Cooler U12S DX-4677 120mm Dual Fan for Intel LGA 4677 Tootekood: NH-U12SDX-4677 Jahutid ja lisad 120mm cooler for Intel LGA 4677, 2x powerful 120mm fans, ideal for tower cases and dual-CPU setups, pre-applied thermal pasteIntel Xeon LGA3647-0 | 3 | 161,30 € | Vaata | ||
 Alphacool NexXxoS UT60 Full Copper X-Flow 40mm Dual (2x40mm) Radiator Tootekood: 14298 Jahutid ja lisad (14298) | 1 | 53,45 € | Vaata | ||
 Noctua Lüfter 92*92*25 NF-A9x14 HS-PWM chromax black swap Noctua NF-A9X14 HS-PWM CH.BK.S computer cooling component Computer case Fan 9.2 cm must | 1-3 tp | 20 | 21,94 € | Vaata | |
 Alphacool Eiswolf 2 AIO - 360mm RTX 3090 Founders Edition with Backplate Tootekood: 14463 Jahutid ja lisad The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H 2 O and offers a max. air flow of 119.8m³/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & cooling channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump L x W x H 231,5 x 120,7 x 46 mm Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow rate 75 L/h Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H 2 O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Note: - Attention: The use of the NVLink is not possible with this AIO! Compatibility list: - NVIDIA GeForce RTX 3090 Founders Edition Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. | 1 | 213,80 € | Vaata | ||
 be quiet! PURE ROCK LP BK034 PURE ROCK LP EXTREMELY COMPACT, QUIET COOLING Pure Rock LP fits into the tightest systems and is your CPU cooler of choice for ultra-compact Mini-ITX builds that require reliable cooling. - Extremely compact design for small form factor systems - With a height of mere 45mm Pure Rock LP fits in nearly any case - be quiet! 92mm high-quality fan offers quiet and reliable cooling with max. 30.6dB(A) - 3 high-performance 6mm heat pipes - User-friendly mounting kit for Intel and AMD With its remarkably small dimensions and yet high enough cooling power, Pure Rock LP is the silent air cooler to go with for HTPCs and small multimedia or gaming systems. Pure Rock LP Air, LGA1150/LGA1151/LGA1155/LGA1200/LGA1700/SAM4/SAM5 Fan speed 2500rpm, Noise level, max 30.6 dB Dimensions 92 x 92 x 45mm, Colour Black Weight 0.358 kg | 1-3 tp | 24 | 49,92 € | Vaata | |
 Alphacool Eisblock Aurora Acryl RTX 4070 Ti Reference with Backplate Alphacool Eisblock Aurora water cooler for Geforce RTX 4XXX graphics cards. | 5 | 155,50 € | Vaata | ||
 Alphacool NexXxoS HPE-30 Full Copper 360mm, Radiator (black) 360 mm großer Radiator für Wasserkühlungen, für High-End-Hardware, aus Kupfer, hohe Finnendichte | 5 | 101,90 € | Vaata | ||
 | Laos | 20 | 64,90 € | Vaata | |
 Alphacool Eisblock Aurora Acryl GPX-N RTX 4080 Reference Design with Backplate (13441) The next generation - the Alphacool Eisblock Aurora water cooler for Geforce RTX 4XXX graphics cards. In order to dissipate the enormous heat of this graphics card generation in the best possible way, numerous optimizations have been made to the water cooler compared to the previous model. The fin structure was adapted and enables a very good water flow while increasing the cooling surface. The modified jet plate with improved inflow engine ensures an optimal distribution of the water on the cooling fins. Technical Highlights The fin structure of this Eisblock cooler generation was developed together with Nvidia board partners. The fin thickness is 0.4 mm, the distance between the cooling fins is 0.4 mm. This ensures a very good water flow while increasing the cooling surface. The jet plate has a revised inlay that spreads the water pressure better over the fins thus optimizing the heat absorption. The adjusted water inflow gives the water a better angle of inflow. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Design The Aurora design of the Geforce RTX 4XXX Eisblock generation is visually calmer and simpler. Only one O-ring runs around the entire cooler. The design around the cooling fins and jetplate makes for a cleaner look. The illumination of the digitally addressable RGB LEDs is even better distributed throughout the cooler as a result of the chrome plating. The terminal's design is in line with the classic Aurora design. Thermal paste & thermal pads The included thermal compound is Alphacool's Subzero. With a thermal conductivity of 16 W/mK, it is one of the highest performing thermal pastes on the market. The electrically non-conductive thermal compund is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850.000 TF. Alphacool Soft Pads with 1mm thickness are used on the voltage converter and the graphics memory. The thermal conductivity of the pads is 7 W/mK. The pads for the back of the PCB are 3mm thick and have a thermal conductivity of 3 W/mK. Compatibility: - Nvidia Geforce RTX 4080 Reference Design - INNO3D GeForce RTX 4080 X3 OC, 16GB GDDR6X, HDMI, 3x DP - INNO3D GeForce RTX 4080 X3, 16GB GDDR6X, HDMI, 3x DP - PNY GeForce RTX 4080 16GB XLR8 Gaming Verto Epic-X RGB Overclocked Triple Fan, 16GB GDDR6X, HDMI, 3x DP (VCG408016TFXXPB1-O) (*) - PNY GeForce RTX 4080 16GB XLR8 Gaming Verto Epic-X RGB Triple Fan, 16GB GDDR6X, HDMI, 3x DP (VCG408016TFXXPB1) (*) - PNY GeForce RTX 4080 16GB Verto Triple Fan, 16GB GDDR6X, HDMI, 3x DP (VCG408016TFXPB1) (*) (* The cooler is compatible with the GPU, but the rear part of the PCB is not covered. This has no negative effect on the cooling performance!) Technical data cooler L x W x H 198,41 x 144,69 x 34,40mm Material cooler chrome-plated copper Material cooler top acrylic Threads 4 x G1/4" Thickness cooling fins 0,4mm Distance cooling fins 0,4mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 12 Technical data backplate L x W x H 198,41 x 120,19 x 6mm Material aluminium Color black | 5 | 122,32 € | Vaata | ||
 Asus Protsessori jahuti S_MULTI/ROG STRIX LC II 360 ARGB ROG STRIX LC II 360 ARGB kõik-ühes vedel protsessori jahuti koos Aura Synci, Intel® LGA 1700, 1200, 1150, 1151, 1152, 1155, 1156, 2011, 2011-3, AMD 2066 ja AMD 3/3/4 toega ROG 120 mm adresseeritavad RGB radiaatoriventilaatorid – Seitsmenda põlvkonna Aseteki pump tagab erakordse jahutuse ja minimaalse müra töövahemikuga alates 840 p/min. - Kolm ROG-i disainiga radiaatoriventilaatorit tagavad optimeeritud õhuvoolu ja staatilise rõhu. - ARGB-valgustus NCVM-kattega pumbakaanel ja radiaatoriventilaatoritel annab edasi elegantse ja kaasaegse disaini. - Esteetiline täiendab suurepäraselt ROG-i emaplaate keskpunktist. - Tugevdatud, varrukatega torud pakuvad suuremat vastupidavust.ROG STRIX LC II 360 ARGBLiquid, LGA1200/LGA1700/LGA2011/LGA2011-3/LGA2066Ventilaatori kiirus 800 - 2500 RPM, Õhuvooluhulk 80 mF6an95 valgustase. Radiaatori mõõtmed: 121 x 394 x 27 mm ; Vesiploki mõõt: 80 x 80 x 45 mm ; Ventilaatori mõõdud: 120 x 120 x 25 mm, kaal 2,3 kg | Laos | 19 | 221,95 € | Vaata | |
 Alphacool ES RTX 3080/3090 Reference Copper/Carbon with Backplate The Alphacool ES GPX Copper/Carbon water cooler with backplate was developed for the Alphacool Enterprise Series. Due to the positioning of the connections, the hosing of the cooler in the server rack is significantly simplified. The top of the cooler is made of carbon. This makes the water cooler lighter compared to Alphacool's Eisblocks with acetal or acrylic tops. Thanks to the compact design, only 1 slot is needed to mount the cooler in the server rack instead of 1.5 slots as before. This additional space saving is one more argument for using the ES GPX Copper/Carbon graphics card water cooler. More performance! Alphacool manages to position the cooler as close as possible to the components to be cooled. For this purpose, the heat conducting pads used are reduced to a thickness of 1mm. The maximum possible reduction in the thickness of the copper block and the optimization of the water flow inside the cooler allow all important components such as GPU, voltage converters and VRAMs to be cooled by water much better and more effectively. All of this provides a significant increase in cooling performance. Connections on the back? In order to save space in the width and height during installation, the water input and output have been moved to the back of the cooling block. This positioning of the connections makes hosing much easier. It enables easy integration of the GPU cooler into the water circuit even in the tightest server housings. Copper or aluminum? Alphacool uses only copper for all water-bearing parts. Copper has almost twice the thermal conductivity of aluminum and is therefore clearly the better choice of material for water cooling. The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Thermal paste & thermal pads The included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive thermal paste is particularly well suited for high contact pressures, but can still be perfectly applied due to its viscosity of 850000 TF. For the thermal pads, Alphacool uses soft pads that fit perfectly to the components to be cooled and are very durable. The 2mm and 3mm thick pads have a thermal conductivity of 3 W/mk. The 1mm thick pads can dissipate 7 W/mk of heat. Discreet appearance The matte carbon finish gives the cooler a noble appearance. This makes it additionally interesting for private users who want to do without aRGB lighting. Compatibility: - Gainward GeForce RTX 3080 Ti 12GB Phoenix - Gainward RTX 3080 Phoenix - Gainward RTX 3080 Phoenix GS - Gainward RTX 3090 Phoenix - Gainward RTX 3090 Phoenix GS - INNO3D GEFORCE RTX 3080 TI ICHILL X4 - INNO3D GEFORCE RTX 3080 TI ICHILL FROSTBITE - INNO3D GEFORCE RTX 3080 TI ICHILL X3 - INNO3D GEFORCE RTX 3080 TI X3 - INNO3D GEFORCE RTX 3080 TI X3 OC - Inno3D GeForce RTX 3080 iChill X3/X4 10240 MB GDDR6X - Inno3D GeForce RTX 3080 Twin X2 OC 10240 MB GDDR6X - INNO3D GEFORCE RTX 3080 12GB ICHILL FROSTBITE LHR - INNO3D GEFORCE RTX 3080 12GB X3 OC LHR - INNO3D GEFORCE RTX 3080 12GB ICHILL X3/X4 LHR - INNO3D GEFORCE RTX 3080 12GB ICHILL BLACK LHR - Inno3D GeForce RTX 3090 iChill X3/X4, 24576 MB GDDR6X - Inno3D GeForce RTX 3090 Gaming X3, 24576 MB GDDR6X - Palit GeForce RTX 3080 Ti GamingPro - Palit GeForce RTX™ 3080 GamingPro - Palit GeForce RTX™ 3080 GamingPro OC - Palit GeForce RTX™ 3090 GamingPro - Palit GeForce RTX™ 3090 GamingPro OC - Zotac Gaming GeForce RTX 3080 Ti AMP Holo - Zotac GeForce RTX 3080 Ti AMP HoloBlack - Zotac Gaming GeForce RTX 3080 Ti Trinity - Zotac Gaming GeForce RTX 3080 Ti Trinity OC - Zotac GAMING GeForce RTX 3080 Trinity - Zotac Gaming GeForce RTX 3080 Trinity OC - Zotac GeForce RTX 3090 Trinity, 24576 MB GDDR6X - Galakuro NVIDIA GEFORCE RTX 3080 GG-RTX3080-E10GB/TP - Galakuro NVIDIA GEFORCE RTX 3090 GG-RTX3090-E24GB/TP - Galax GeForce RTX 3080 SG 10GB GDDR6X 320-bit DP*3/HDMI - Galax GeForce RTX 3090 SG 24GB GDDR6X 320-bit DP*3/HDMI - KFA2 GeForce RTX 3080 SG 10GB GDDR6X 320-bit DP*3/HDMI - KFA2 GeForce RTX 3090 SG 24GB GDDR6X 320-bit DP*3/HDMI - PNY GeForce RTX 3080 XLR8 Gaming EPIC-X RGB 10240 MB GDDR6X (VCG308010TFXMPB) - PNY GeForce RTX 3080 XLR8 Gaming EPIC-X RGB 10240 MB GDDR6X (VCG308010TFXPPB) - PNY GeForce RTX 3090 XLR8 Gaming EPIC-X RGB, 24576 MB GDDR6X Technical data cooler L x W x H 247,30 x 95,35 x 23,08mm Material cooler chrome-plated copper Material cooler top carbon Threads 2 x G1/4" Thickness cooling fins 0,6mm Maximum working temperature 60 °C Pressure tested 0,8 Bar Technical data backplate L x W x H 237,20 x 95,35 x 6mm Material aluminium Color black | 1-3 tp | 14 | 39,00 € | Vaata | |
 Alphacool Eisblock Aurora Geforce RTX 4090 Strix + TUF with Backplate The next generation - the Alphacool Eisblock Aurora water cooler for Geforce RTX 40XX graphics cards. In order to dissipate the enormous heat of this graphics card generation in the best possible way, numerous optimizations have been made to the water cooler compared to the previous model. The fin structure was adapted and enables a very good water flow while increasing the cooling surface. The modified jet plate with improved inflow engine ensures an optimal distribution of the water on the cooling fins. Technical Highlights The fin structure of this Eisblock cooler generation was developed together with Nvidia board partners. The fin thickness is 0.4 mm, the distance between the cooling fins is 0.4 mm. This ensures a very good water flow while increasing the cooling surface. The jet plate has a revised inlay that spreads the water pressure better over the fins thus optimizing the heat absorption. The adjusted water inflow gives the water a better angle of inflow. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Design The Aurora design of the Geforce RTX 40XX Eisblock generation is visually calmer and simpler. Only one O-ring runs around the entire cooler. The design around the cooling fins and jetplate makes for a cleaner look. The illumination of the digitally addressable RGB LEDs is even better distributed throughout the cooler as a result of the chrome plating. The terminal's design is in line with the classic Aurora design. Thermal paste & thermal pads The included thermal compound is Alphacool's Subzero. With a thermal conductivity of 16 W/mK, it is one of the highest performing thermal pastes on the market. The electrically non-conductive thermal compund is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850.000 TF. Alphacool Soft Pads with 1mm thickness are used on the voltage converter and the graphics memory. The thermal conductivity of the pads is 7 W/mK. The pads for the back of the PCB are 3mm thick and have a thermal conductivity of 3 W/mK. Compatibility: - ASUS TUF Gaming GeForce RTX 4090 OC, TUF-RTX4090-O24G-GAMING, 24GB GDDR6X (90YV0IE0-M0NA00) - ASUS TUF Gaming GeForce RTX 4090, TUF-RTX4090-24G-GAMING, 24GB GDDR6X (90YV0IE1-M0NA00) - ASUS ROG Strix GeForce RTX 4090 OC, ROG-STRIX-RTX4090-O24G-GAMING, 24GB GDDR6X (90YV0ID0-M0NA00) - ASUS ROG Strix GeForce RTX 4090, ROG-STRIX-RTX4090-24G-GAMING, 24GB GDDR6X (90YV0ID1-M0NA00) Technical data cooler L x W x H 220,9 x 157 x 34,2mm Material cooler chrome-plated copper Material cooler top acrylic Threads 4 x G1/4" Thickness cooling fins 0,4mm Distance cooling fins 0,4mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 12 Technical data backplate L x W x H 220,9 x 132,5 x 6mm Material aluminium Color black | 3 | 155,50 € | Vaata | ||
 Deepcool Mounting Upgrades For NEPTWIN Series The DeepCool Mounting Upgrades For NEPTWIN Series, model EM072-MKNNIN-G-1, is a specialized accessory designed to enhance the compatibility and installation process of your cooling system. With dimensions of 105mm in depth, 135mm in height, 30mm in width, and a gross weight of 0.141 kg, this kit is compact yet essential for a seamless setup. It is compatible with a wide range of Deepcool coolers, including the GAMMAXX 400/GTE/GT Series, NEPTWIN Series, AS500 Series/AK620, ASSASSIN III, and CASTLE/GAMMAXX Liquid Coolers, ensuring a broad application scope. The kit, weighing a net 0.123 kg, is a must-have for users looking to upgrade or maintain their Deepcool cooling systems, ensuring optimal performance and a perfect fit. | Laos | 1 | 5,90 € | Vaata | |
 EK Water Blocks EK-Quantum Vector TRIO RTX 3080/3090 aktive Backplate D-RGB - Acryl EK-Quantum Vector TRIO RTX 3080/3090 Active Backplate - Acetal ist eine hochmoderne Ergänzung der EK® Quantum Line. Sie ergänzt die bestehenden EK-Quantum Vector TRIO RTX 3080/3090 Wasserblöcke und kühlt aktiv die Rückseite aller MSI® TRIO und SUPRIM GeForce RTX™ 3080 und 3090 GPUs. Die EK-Quantum Vector TRIO RTX 3080/3090 Active Backplate wird mit einem neuen Anschluss geliefert, der den serienmäßigen Anschluss des Vector Wasserblocks ersetzt und den Wasserblock und die Vector Active Backplate zu einer Einheit verbindet. Auf diese Weise benötigt das gesamte Gehäuse nur einen Zu- und einen Abfluss, wodurch unnötige zusätzliche Schläuche entfallen und das Durcheinander reduziert wird. Es ist die ultimative ästhetische und leistungsfähige Lösung, bei der Ihre GPU zwischen zwei Wasserblöcken eingebettet ist, was eine maximale Kühlung ermöglicht. Technische Spezifikation: Abmessungen: (LxHxB) - 307x153x38mm Lieferumfang: EK-Quantum Vector TRIO RTX 3080/3090 Aktive Backplate - Plexi Erforderliche Befestigungsschrauben, Muttern und Unterlegscheiben 1x vernickelter Messingstecker G1/4" EK-Loop Multi Inbusschlüssel (6mm, 8mm, 9mm) Thermische Pads | 2 | 159,80 € | Vaata | ||
 Alphacool Eiswolf 2 AIO - 360mm RTX 4090 Strix + TUF with Backplate The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: - ASUS TUF Gaming GeForce RTX 4090 OC, TUF-RTX4090-O24G-GAMING, 24GB GDDR6X (90YV0IE0-M0NA00) - ASUS TUF Gaming GeForce RTX 4090, TUF-RTX4090-24G-GAMING, 24GB GDDR6X (90YV0IE1-M0NA00) - ASUS ROG Strix GeForce RTX 4090 OC, ROG-STRIX-RTX4090-O24G-GAMING, 24GB GDDR6X (90YV0ID0-M0NA00) - ASUS ROG Strix GeForce RTX 4090, ROG-STRIX-RTX4090-24G-GAMING, 24GB GDDR6X (90YV0ID1-M0NA00) Technical data radiator Dimensions (L x W x H) 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Options for fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump Dimensions (L x W x H) 220,90 x 166,60 x 46,10 mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners Dimensions (L x D) 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions (L x W x H) 120 x 120 x 25mm Net weight 187g Max working temperature 60°C | 2 | 252,90 € | Vaata | ||
 Alphacool Eiswolf 2 AIO - 360mm RTX 4090 Founders Edition with Backplate Tootekood: 14485 Jahutid ja lisad The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: - Nvidia GeForce RTX 4090 Founders Edition Technical data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Options for fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump L x W x H 205,42 x 156,89 x 47,8mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners L x D 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25mm Net weight 187g Max working temperature 60°C | 1 | 202,40 € | Vaata | ||
 Alphacool Eiswolf 2 AIO - 360mm RTX 4090 Reference mit Backplate The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Important note: The RTX 4090 Eiswolf 2 Reference AiO is not compatible with Nvidia's Geforce RTX 4090 Founders Edition. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: - NVIDIA RTX 4090 Graphics Cards in Reference Design - INNO3D GeForce RTX 4090 X3 OC, 24GB GDDR6X, HDMI, 3x DP (N40903-246XX-18332989) - INNO3D GeForce RTX 4090 iCHILL X3, 24GB GDDR6X, HDMI, 3x DP (C40903-246XX-1833VA47) - INNO3D GeForce RTX 4090 iCHILL Frostbite, 24GB GDDR6X, HDMI, 3x DP (C4090-246XX-1833FB) - INNO3D GeForce RTX 4090 iCHILL Black, 24GB GDDR6X, HDMI, 3x DP (C4090-246XX-18330005) - PNY GeForce RTX 4090 XLR8 Gaming Verto Epic-X RGB Overclocked Triple Fan, 24GB GDDR6X, HDMI, 3x DP (VCG409024TFXXPB1-O) (*) - PNY GeForce RTX 4090 XLR8 Gaming Verto Epic-X RGB Triple Fan, 24GB GDDR6X, HDMI, 3x DP (VCG409024TFXXPB1) (*) (* The cooler is compatible with the GPU, but the rear part of the PCB is not covered. This has no negative effect on the cooling performance!) Technical data radiator Dimensions (L x W x H) 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Options for fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump Dimensions (L x W x H) 198,5 x 154 x 40,5mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners Dimensions (L x D) 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions (L x W x H) 120 x 120 x 25mm Net weight 187g Max working temperature 60°C | 3 | 262,30 € | Vaata | ||
 Alphacool Eiswolf 2 AIO - 360mm RTX 4090 Suprim with Backplate Tootekood: 14486 Jahutid ja lisad The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: - MSI GeForce RTX 4090 Suprim X 24G, 24GB GDDR6X, HDMI, 3x DP (V510-001R) - MSI GeForce RTX 4090 Suprim Liquid X 24G, 24GB GDDR6X, HDMI, 3x DP - MSI GeForce RTX 4090 Gaming Trio 24G, 24GB GDDR6X, HDMI, 3x DP Technical data radiator Dimensions (L x W x H) 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Options for fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump Dimensions (L x W x H) 266,6 x 169,5 x 46,1mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners L x D 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions (L x W x H) 120 x 120 x 25mm Net weight 187g Max working temperature 60°C | 1 | 262,30 € | Vaata | ||
 Alphacool Eiswolf 2 AIO - 360mm RTX 4090 GameRock + Phantom with Backplate Tootekood: 13469 Jahutid ja lisad The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: - Palit GeForce RTX 4090 GameRock, 24GB GDDR6X, HDMI, 3x DP (NED4090019SB-1020G) - Palit GeForce RTX 4090 GameRock OC, 24GB GDDR6X, HDMI, 3x DP (NED4090S19SB-1020G) - Gainward GeForce RTX 4090 Phantom, 24GB GDDR6X, HDMI, 3x DP (3390) - Gainward GeForce RTX 4090 Phantom GS, 24GB GDDR6X, HDMI, 3x DP (3413) Technical data radiator Dimensions (L x W x H) 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Options for fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump Dimensions (L x W x H) 214,91 x 154,79 x 47,62mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners L x D 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions (L x W x H) 120 x 120 x 25mm Net weight 187g Max working temperature 60°C | 1 | 262,30 € | Vaata | ||
 Alphacool Eiswolf 2 AIO - 360mm RTX 4090 Aorus Master - Gaming with Backplate Tootekood: 13477 Jahutid ja lisad The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: - GIGABYTE GeForce RTX 4090 Gaming OC 24G, 24GB GDDR6X (GV-N4090GAMING OC-24GD) - GIGABYTE AORUS GeForce RTX 4090 Master 24G, 24GB GDDR6X (GV-N4090AORUS M-24GD) Technical data radiator Dimensions (L x W x H) 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Options for fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump Dimensions (L x W x H) 233,30 x 162,06 x 47,40mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners Dimensions (L x D) 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions (L x W x H) 120 x 120 x 25mm Net weight 187g Max working temperature 60°C | 1 | 262,30 € | Vaata | ||
 Alphacool Eiswolf 2 AIO - 360mm RTX 4090 AMP with Backplate The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: - Zotac Gaming GeForce RTX 4090 AMP Extreme AIRO, 24GB GDDR6X, HDMI, 3x DP (ZT-D40900B-10P) - Zotac Gaming GeForce RTX 4090 Trinity OC, 24GB GDDR6X, HDMI, 3x DP (ZT-D40900J-10P) - Zotac Gaming GeForce RTX 4090 Trinity, 24GB GDDR6X, HDMI, 3x DP (ZT-D40900D-10P) Technical data radiator Dimensions (L x W x H) 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Options for fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump Dimensions (L x W x H) 232,40 x 154,69 x 49,39mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners Dimensions (L x D) 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions (L x W x H) 120 x 120 x 25mm Net weight 187g Max working temperature 60°C | 2 | 262,30 € | Vaata | ||
 Alphacool Eiswolf 2 AIO - 360mm RX 6800/6800XT/6900 Reference Design mit Backplate Tootekood: 14423 Jahutid ja lisad The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: Radeon RX 6800/6800XT/6900 graphics cards using the reference design Data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material chambers Copper Material cooling channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Data cooler and pump L x W x H 140 x 265 x 46mm Material cooler bottom Chrome plated copper Material cooler top PMMA Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Data quick fasteners L x D 95 x 27 mm Material Nylon For tube size 12,7 / 7,6 mm Color Black Data fittings L x D straight fitting 24 x 18 mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17 mm Quantity 90° fittings 2x For tube size 12,7 / 7,6 mm Material fittings Brass Data tube Length 50 cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6 mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Net weight 187 g Max working temperature 60 °C | 1 | 208,90 € | Vaata | ||
 Alphacool Eiswolf 2 AIO - 360mm RX 6800XT/6900XT Nitro+ mit Backplate Tootekood: 14424 Jahutid ja lisad The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: - Sapphire Nitro+ Radeon RX 6800 XT SE, 16GB GDDR6, HDMI, 2x DP, USB-C (11304-01-20G) - Sapphire Nitro+ Radeon RX 6800 XT, 16GB GDDR6, HDMI, 3x DP (11304-02-20G) - Sapphire Nitro+ Radeon RX 6900 XT, 16GB GDDR6, HDMI, 3x DP (11308-01-20G) Data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins Copper Material chambers Copper Material cooling channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Data cooler and pump L x W x H 260 x 142,5 x 46mm Material cooler bottom Chrome plated copper Material cooler top PMMA Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Data quick fasteners L x D 95 x 27 mm Material Nylon For tube size 12,7 / 7,6 mm Color Black Data fittings L x D straight fitting 24 x 18 mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17 mm Quantity 90° fittings 2x For tube size 12,7 / 7,6 mm Material fittings Brass Data tube Length 50 cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6 mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Net weight 187 g Max working temperature 60 °C | 1 | 211,80 € | Vaata | ||
 Alphacool Eiswolf 2 AIO 360mm 7900XT/X with Backplate The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: - ASRock Radeon RX 7900 XT Taichi OC, RX7900XT TC 20GO, 20GB GDDR6, HDMI, 3x DP - ASRock Radeon RX 7900 XTX Taichi OC, RX7900XTX TC 24GO, 24GB GDDR6, HDMI, 3x DP, HDMI - ASRock Radeon RX 7900 XT Phantom Gaming OC, RX7900XT PG 20GO, 20GB GDDR6, HDMI, 3x DP (90-GA3XZZ-00UANF) - ASRock Radeon RX 7900 XTX Phantom Gaming OC, RX7900XTX PG 24GO, 24GB GDDR6, HDMI, 3x DP, HDMI Technical data radiator Dimensions (L x W x H) 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Options for fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump Dimensions (L x W x H) 274,10 x 161,15 x 47,52 mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners Dimensions (L x D) 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions (L x W x H) 120 x 120 x 25mm Net weight 187g Max working temperature 60°C | 2 | 262,30 € | Vaata | ||
 Alphacool Eiswolf 2 AIO, 360 mm, 7900XT/X Nitro - mit Backplate Tootekood: 13516 Jahutid ja lisad The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: - Sapphire Nitro+ Radeon RX 7900 XT Vapor-X, 20GB GDDR6, 2x HDMI, 2x DP (11323-01-20G) - Sapphire Nitro+ Radeon RX 7900 XTX Vapor-X, 24GB GDDR6, 2x HDMI, 2x DP (11322-01-20G) Technical data radiator Dimensions (L x W x H) 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Options for fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump Dimensions (L x W x H) 276,70 x 151,05 x 46,10 mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners Dimensions (L x D) 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions (L x W x H) 120 x 120 x 25mm Net weight 187g Max working temperature 60°C | 1 | 262,30 € | Vaata | ||
 Alphacool Eiswolf 2 AIO - 360mm RTX 3080/3090 TUF mit Backplate Tootekood: 14419 Jahutid ja lisad The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: - ASUS TUF Gaming GeForce RTX 3080 Ti 12GB OC - ASUS TUF Gaming GeForce RTX 3080 OC, TUF-RTX3080-O10G-GAMING - ASUS TUF Gaming GeForce RTX 3080, TUF-RTX3080-10G-GAMING - ASUS TUF Gaming GeForce RTX 3090, TUF-RTX3090-24G-GAMING - ASUS TUF Gaming GeForce RTX 3090 OC, TUF-RTX3090-O24G-GAMING Data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins Copper Material chambers Copper Material cooling channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Data cooler and pump L x W x H 238 x 142,1 x 46 mm Material cooler bottom Chrome plated copper Material cooler top PMMA Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Data quick fasteners L x D 95 x 27 mm Material Nylon For tube size 12,7 / 7,6 mm Color Black Data fittings L x D straight fitting 24 x 18 mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17 mm Quantity 90° fittings 2x For tube size 12,7 / 7,6 mm Material fittings Brass Data tube Length 50 cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6 mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Net weight 187 g Max working temperature 60 °C | 1 | 291,30 € | Vaata | ||
 Alphacool Eiswolf 2 AIO - 360mm RTX 3090 Ti Suprim X mit Backplate Tootekood: 14477 Jahutid ja lisad The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: - MSI GeForce RTX 3090 Ti Suprim X 24G, 24GB GDDR6X, HDMI, 3x DP - MSI GeForce RTX 3090 Ti Gaming X Trio 24G, 24GB GDDR6X, HDMI, 3x DP - MSI GeForce RTX 3090 Ti Gaming Trio 24G, 24GB GDDR6X, HDMI, 3x DP - MSI GeForce RTX 3090 Ti Suprim 24G, 24GB GDDR6X, HDMI, 3x DP Technical data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump L x W x H 265,8 x 162,5 x 46mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners L x D 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25mm Net weight 187g Max working temperature 60°C | 1 | 210,80 € | Vaata | ||
