GPU-Wasserkühler im Full-Block-Design, für RTX 4090 FE-Grafikkarten, Kühlkörper aus vernickeltem Kupfer, Deckel aus schwarzem Acetal, integrierte D-RGB-Beleuchtung
GPU-Wasserkühler im Full-Block-Design, für RTX 4090 FE-Grafikkarten, Kühlkörper aus vernickeltem Kupfer, Deckel aus transparentem Acryl, integrierte D-RGB-Beleuchtung
GPU-Wasserkühler im Full-Block-Design, für Gigabyte Master/Gaming OC RTX 4090-Grafikkarten, Kühlkörper aus vernickeltem Kupfer, Deckel aus schwarzem Acetal, integrierte D-RGB-Beleuchtung
GPU-Wasserkühler im Full-Block-Design, für RTX 4080 FE-Grafikkarten, Kühlkörper aus vernickeltem Kupfer, Deckel aus schwarzem Acetal, integrierte D-RGB-Beleuchtung
GPU-Wasserkühler im Full-Block-Design, für RTX 4080 FE-Grafikkarten, Kühlkörper aus vernickeltem Kupfer, Deckel aus transparentem Acryl, integrierte D-RGB-Beleuchtung
GPU-Wasserkühler im Full-Block-Design, für RTX 4090 AMP/Trinity-Grafikkarten, Kühlkörper aus vernickeltem Kupfer, Deckel aus transparentem Acryl, integrierte D-RGB-Beleuchtung
This G1/4” thread extension is primarily meant as a replacement or addition to the Alphacool GPX coolers. However, it can also be used for many other purposes. Scope of Delivery: Alphacool NexXxos GPX thread extension 73mm - Deep Black
Arc Mandrel Small versionTubes with 13 or 12 mm Ø are bent around a 23.5 mm radius Tubes with 16 mm Ø are bent around a 22 mm radius Do not bend over an angle of 180°, so that you can still remove the tube when it has cooled.All bending mandrels and stoppers are designed for tube diameters of 12 or 13 mm and 16 mm. The necessary guidance is always aligned downwards.
Arc Mandrel Big versionTubes with 13 or 12 mm Ø are bent around a 33.5 mm radiusTubes with 16 mm Ø are bent around a 32 mm radius Do not bend over an angle of 180°, so that you can still remove the tube when it has cooled.All bending mandrels and stoppers are designed for tube diameters of 12 or 13 mm and 16 mm. The necessary guidance is always aligned downwards.
HardTube saw tool - mitre box from the new Eiskoffer set. With this mitre box, cutting HardTubes is a cinch. Its special rubberised channels for 13mm and 16mm HardTubes prevent the tubes from sliding around and getting scratched. The mitre box can be anchored with two small screw clamps.
90° Mandrel 2 versions for 3-dimensional bending, forTubes with 13 or 12 mm Ø The horizontal angle is freely adjustable over 180°. To adjust, loosen the back M4 screws using the included hexagon socket and set the desired angle with the 1° scale. Finally, tighten the screws again.Select the correct version, to correspond with the diameter of your selected tube. Manual
Flex Mandrel Mandrel for especially large or freely adjustable radii. The radius can also be changed during use, i.e. it can be narrowed or widened. The middle radius is shown with a marking. Min. radius: 75 mm Max. radius: 165 mm. All bending mandrels and stoppers are designed for tube diameters of 12 or 13 mm and 16 mm. The necessary guidance is always aligned downwards. Manual
Multi Mandrel possible angles: 30°, 45°, 60°, 90° Big versionTubes with 13 or 12 mm Ø are bent around a 33.5 mm radius Tubes with 16 mm Ø are bent around a 32 mm radius Do not bend over a total angle of 180°, so that you can still remove the tube when it has cooled. All bending mandrels and stoppers are designed for tube diameters of 12 or 13 mm and 16 mm. The necessary guidance is always aligned downwards. Manual
Rulers For measuring the distance between the fi ttings you want to join. You can also connect the rulers to one another or mount them to bending plate to carry over measurement results. Manual
Rulers For measuring the distance between the fi ttings you want to join. You can also connect the rulers to one another or mount them to bending plate to carry over measurement results. Manual
Rulers For measuring the distance between the fi ttings you want to join. You can also connect the rulers to one another or mount them to bending plate to carry over measurement results. Manual
Alphacool Eiskoffer - Bending Plate Alphacool has made the bending plate available for purchase on its own. Maybe one bending plate is too small to design your entire system in 3D.With a second, third, or even fourth bending plate, you can set up, bend, and design your entire system at once.
45° Mandrel 2 versions for 3-dimensional bending, forTubes with 16 mm Ø The horizontal angle is freely adjustable over 180°. To adjust, loosen the back M4 screws using the included hexagon socket and set the desired angle with the 1° scale. Finally, tighten the screws again.Select the correct version, to correspond with the diameter of your selected tube. Manual
90° Mandrel 2 versions for 3-dimensional bending, forTubes with 16 mm Ø The horizontal angle is freely adjustable over 180°. To adjust, loosen the back M4 screws using the included hexagon socket and set the desired angle with the 1° scale. Finally, tighten the screws again.Select the correct version, to correspond with the diameter of your selected tube. Manual
The Alphacool Bubble Down is a spare part for various Alphacool expansion tanks with integrated pump top. It prevents the pump from sucking air out of the expansion tank which can lead to unpleasant noises. Furthermore, a pump can also be damaged by too much sucked air.
High-End-CPU-Wasserkühler, Kühler aus vernickeltem Kupfer, Deckel aus silber satiniertem Messing, mit adressierbarer RGB-Beleuchtung, für Intel-Sockel 1200
