Pick your way to repair! Thin prying tool for opening electronic devices. Guitar picks are essential to open any iPad, tablet, or smartphone sealed with adhesive. 6 very thin opening picks Can be used for prying, sliding, separating, and air guitaring. These picks are especially useful for prying open iPads and other glue-laden devices.
Fast charging, fast data transmission The practical and robust Baseus cable for charging Apple products supports the Power Delivery fast charging system up to 20W and is compatible with PD18W chargers. In addition, it also provides lightning fast data transfer of up to 480 MB/S. Voltage control The cable is equipped with an innovative chip that intelligently detects whether a device has a fast charging system. It thus controls the voltage and uses the appropriate one depending on the device to which it is connected, thus protecting your device's battery and ensuring the most optimal charging possible. Powerful and robust High user comfort and functionality have been ensured by using the highest quality materials. The five-band copper core has been protected by a fire-resistant and durable polyethylene material, and the whole is covered with an extremely damage-resistant ABS nylon weave. The zinc alloy used to cover the end is resistant to discolouration and rust, and the rubber joints have been specially reinforced. ManufacturerBaseusNameHigh Density Braided Fast Charging Data CableModelCATLGD-A03MaterialABS, High density braided wireColourBlueLength2 mConnectorsUSB-C, LightningTransmission speed480 MB/s
Product kirjeldus: Tracer MobiEnergy - car power adapter - 65 vatti seadme tüüp: Car power adapter - external sisendpinge: 15 - 24 V Power maht: 65 vatti Sisendühendused: Automobile cigarette lighter Output Ühendusi: 1 x power Lisatarvikud: 8 power tips
Rihma sobivus Sobita rihm ükskõik, millise Apple Watch Series 7 samas suuruses kellaga. See sobib ka kõigi eelnevate Apple Watch mudelitega, kaasa arvatud Apple Watch Series 3. 41 mm rihm sobib 40mm ja 38 mm kellaga, 45 mm rihm sobib 44 mm ja 42 mm kellaga.
JBL kõlari liitium-polümeer aku mahutavusega 6000mAh. Mõõdud: 95.12 x 31.36 x 18.80mm. NB! Palun veendu, et kaabli polaarsus oleks õige. Sarnane toode on laokoodiga GSP1029102A, millel on teistpidi polaarsus.
Hydraulic gas upgrade for P1000/P1000i, 6-stage adjustable damping, quick release for easy installation, supports inverted pedal installation The Simagic P-HTS is a hydraulic throttle add-on for the P1000 and P1000i pedals, aimed at SimRacers who want to enhance their setup with realistic throttle pedal feedback. With precise damping, robust construction, and easy integration, it offers a professional upgrade for demanding drivers. Hydraulic damping system with 6-level adjustment for a customized pedal feel Innovative quick-release design allows for fast and tool-free installation Graphite-copper connection ensures high wear resistance and long-term stability Compatible with inverted pedal installation for authentic ergonomics Specifically designed for Simagic P1000 and P1000i pedals Precise damping for realistic throttle pedal feedback The P-HTS’s 6-level adjustable damping allows the throttle response to be individually tailored. This results in a more realistic driving experience and improves control when accelerating, especially when exiting corners. Robust materials for long-lasting performance The use of a graphite-copper connection in the damping system ensures high wear resistance and stability over long periods. This minimizes mechanical failures and guarantees reliable performance even with intensive use. Easy integration and versatile compatibility Thanks to the quick-release design, the P-HTS can be quickly and easily mounted on existing P1000 or P1000i pedals. Support for inverted pedal installations also allows flexible adaptation to various SimRacing setups.
Take advantage of the new car organiser from InnovaGoods Gadget Car (pack of 2)! A comfortable and practical way to avoid having to constantly search the car for the things you need, as it keeps a multitude of objects in one place and at hand: maps, notepads, pens, keys, mobiles, chargers, etc. With its modern and functional design, it fits in easily between the front seats of the car. Manufactured from PVC Easy to place and remove for cleaning Pack includes 2 organisers Approx. measurements: 37 x 11 x 6 cm Packaging in 24 langauges (English, French, Spanish, German, Italian, Portuguese, Dutch, Polish, Hungarian, Romanian, Danish, Swedish, Finnish, Lithuanian, Norwegian, Slovenian, Greek, Czech, Bulgarian, Croatian, Slovakian, Estonian, Russian, Lithuanian)
The Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF with Backplate combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical details L x W x H 143 x 240 x 24,5 mm Material cooler Nickle-plated copper Material cooler top POM clear Threads 4 x G1/4“ Thickness cooling fins 0,6 mm Illumination Digital RGB LEDs Power connector Digital RGB LEDs 3-Pin JST Power Digital RGB LEDs 5V Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards Compatibility : - ASUS TUF Gaming GeForce RTX 3070 OC, TUF-RTX3070-O8G-GAMING, 8GB GDDR6, 2x HDMI, 3x DP (90YV0FQ6-M0NA00) - ASUS TUF Gaming GeForce RTX 3070, TUF-RTX3070-8G-GAMING, 8GB GDDR6, 2x HDMI, 3x DP (90YV0FQ7-M0NA00) - ASUS Dual GeForce RTX 3070 OC, DUAL-RTX3070-O8G, 8GB GDDR6, 2x HDMI, 3x DP (90YV0FQ0-M0NA00) - ASUS Dual GeForce RTX 3070, DUAL-RTX3070-8G, 8GB GDDR6, 2x HDMI, 3x DP (90YV0FQ1-M0NA00) Download Datasheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 TUF/DUAL with Backplate Download Manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 TUF/DUAL with Backplate
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®. (Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316 , Dremel® - Art.No: 32196 and 32229 ) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 13/10mm 40cm WARNING: Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note: Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention: This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®. (Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316 , Dremel® - Art.No: 32196 and 32229 ) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 13/10mm 60cm WARNING: Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note: Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention: This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®. (Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316 , Dremel® - Art.No: 32196 and 32229 ) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 16/11mm 40cm WARNING: Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note: Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention: This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®. (Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316 , Dremel® - Art.No: 32196 and 32229 ) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 16/11mm 90° 10/30cm WARNING: Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note: Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention: This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
Einzelner 120-mm-PWM-Lüfter in Weiß, einzigartiges Stecksystem für weniger Kabelsalat, mit adressierbaren RGB-LEDs, bis zu 1.900 U/min mit max. 109,6 m³/h Fördervolumen, max. 2,62 mmH2O statischer Druck, Hinweis: Benötigt Lian Li UNI HUB (LULI-024/LULI-025)
The adapter for 14mm (AD) Hard Tubes in matt black from Bitspower is especially designed for the connection of two graphics cards with SLI/ Crossfire to bridge the short distance. If two graphics cards are used, two of the adapters are also required. They are sealed with two rubber rings. The adapter is especially well compatible with Bitspower's Crystal Link Tube series. Technical Data: Material: Nickel-Plated Brass Colour: Matt Schwarz Connection: 14 mm (OD) Thread: G1/4" Thread Length: 5 mm
The nickel-plated sealing plug in matt black from Bitspower can be screwed into a G1/4" internal thread for a certain time or permanently, e.g. to seal radiators or equalizing tanks. Technical Data: Material: Nickel-Plated Brass Colour: Matt Black Thread: G1/4" Thread Length: 5 mm
