Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.Available colours: Black, Blue, Grey, Red, White.
CAT 6A patch cable, S/FTP (PiMF)copper conductor (CU), halogen-free cable sheath (LSZH)CAT cables transmit signals in top quality at high speed, always guaranteeing a stable connection. High-quality inner conductors, robust cable sheathing and precisely fitting plugs distinguish our portfolio of connection cables and plugs. Goobay always provides the perfect products for your network needs - whether you aim to set up a home or company network. Simply. All. You need!Double-shielded LAN cable with 2x RJ45 plugs for connecting network componentsCAT 6A internet cable suitable for 10 Gigabit Ethernet 10BASE-T, 100BASE-TX, 1000BASE-T, 10/100/1000/10000 Mbit/sS/FTP overall shield: aluminium foil shield for individual wire pairs (PiMF) and aluminium braid shield for the cable sheathHigh-quality copper conductor (CU) and 3µ gold-plated contacts guarantee an excellent, powerful network connectionBend protection and a sturdy PVC jacket effectively protect the Ethernet cable from breakageLatch protection on RJ45 plugs prevents the latch from snagging or breaking off, helping to provide a reliable internet connectionNetwork cable is CAT 6A tested (incl. test report) and suitable for Power over Ethernet (PoE,PoE+)
CAT 6A patch cable, S/FTP (PiMF)copper conductor (CU), halogen-free cable sheath (LSZH)CAT cables transmit signals in top quality at high speed, always guaranteeing a stable connection. High-quality inner conductors, robust cable sheathing and precisely fitting plugs distinguish our portfolio of connection cables and plugs. Goobay always provides the perfect products for your network needs - whether you aim to set up a home or company network. Simply. All. You need!Double-shielded LAN cable with 2x RJ45 plugs for connecting network componentsCAT 6A internet cable suitable for 10 Gigabit Ethernet 10BASE-T, 100BASE-TX, 1000BASE-T, 10/100/1000/10000 Mbit/sS/FTP overall shield: aluminium foil shield for individual wire pairs (PiMF) and aluminium braid shield for the cable sheathHigh-quality copper conductor (CU) and 3µ gold-plated contacts guarantee an excellent, powerful network connectionBend protection and a sturdy PVC jacket effectively protect the Ethernet cable from breakageLatch protection on RJ45 plugs prevents the latch from snagging or breaking off, helping to provide a reliable internet connectionNetwork cable is CAT 6A tested (incl. test report) and suitable for Power over Ethernet (PoE,PoE+)
CAT 5e Patch Cable, U/UTP, bluecopper-clad aluminium wire (CCA)Goobay CAT cables transmit signals in top quality at high speed, always guaranteeing a stable connection. High-quality inner conductors, robust cable sheathing and precisely fitting plugs distinguish our portfolio of connection cables and plugs. Goobay always provides the perfect products for your network needs - whether you aim to set up a home or company network. Simply. All. You need!Prewired, unshielded LAN cable with 2x RJ45 plugs for connecting network componentsHigh-quality copper-clad aluminium wire (CCA) and gold-plated contacts guarantee an excellent, powerful network connection.Latch protection on the RJ45 connector prevents the latch from snagging or breaking off, helping to provide a reliable internet connection.Bend protection and a sturdy PVC jacket effectively protect the Ethernet cable from breakage.Length of the network cable indicated on the overmoulded slimline strain relief.Network connector: pair sequence according to EIA/TIA 568BCAT 5e network cable suitable for Gigabit Ethernet with speeds of up to 10/100/1000 Mbit/s
Cat.6 U/UTP PVC network cable with support for bandwidth up to 250 MHz and features a snagless design with gold plated contacts for Ethernet standards up to 1GBase-T. Cat.6 cable for operating frequencies up to 250 MHz. The unshielded version (U/UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameters (NExT, FExT, etc.) despite the lack of shielding. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
Câble de brassage à paires torsadées avec connecteurs RJ45Cat.6A S/FTP PIMF, TPEConnecteur intégré sans accroc pour la protection du verrouPlaqué ou broches pour une meilleure conductivité et l'élimination de la perte de signalGarantie de 10 ansCâble réseau S/FTP Cat.6A avec prise en charge d'une bande passante allant jusqu'à 500MHz et doté d'un design anti-accroc et des contacts plaqués or, pour normes Ethernet jusqu'à 10 GBase-T.Câble Cat.6A, blindé avec tresse comme blindage général et blindage pour les différentes paires de conducteurs (S/FTP). Les câbles Cat.6A répondent aux exigences du 10 Gigabit Ethernet (10GBaseT) avec une fréquence de fonctionnement allant jusqu'à 500MHz. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés anticorrosion garantissent des connexions fiables sur le long terme. La conception robuste et le système anti-accroc du connecteur évite d'endommager le loquet lors de l'installation et de la déconnexion.Le TPE utilisé comme matériau pour la gaine offre une flexibilité accrue et facilite la manipulation des câbles.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Vasest kaabel (CU), halogeenivaba kaabli ümbris (LSZH)Topeltvarjestatud LAN-kaabel 2x RJ45 pistikutega võrgukomponentide ühendamiseksCAT 6A võrgukaabel, mis sobib 10 Gigabit Ethernet 10BASE-T, 100BASE-TX, 1000BASE-T, 10/100/1000/10000 Mbit/s jaoks.S/FTP üldvarjestus: üksikute juhtmepaaride (PiMF) alumiiniumfooliumiga varjestus ja kaabli mantli alumiiniumpunutisega varjestus.Kvaliteetne vasest kaabel (CU) ja 3µ kullatud kontaktid tagavad suurepärase ja võimsa võrguühenduse.Painutuskaitse ja tugev kate kaitsevad võrgukaablit tõhusalt purunemise eest.RJ45-pistikute lukustuskaitse takistab lukustuse kinnijäämist või katkemist, aidates tagada usaldusväärset internetiühendust.Võrgukaabel on CAT 6A testitud (koos katseprotokolliga) ja sobib Power over Ethernet (PoE,PoE+) jaoks.
Logitech G915 X LIGHTSPEED on juhtmevaba mänguriklaviatuur, mis pakub ikoonilist kiirust, täpsust ja kohandamisvõimalusi. Ultraõhuke ja vastupidav disain koos tri-mode ühenduse (LIGHTSPEED, Bluetooth või juhtmega) ja GL mehaaniliste lülititega tagab mugava ja täpse mängukogemuse. Kohandatav LIGHTSYNC RGB valgustus ja KEYCONTROL võimaldavad täpset juhtimist ja mängude isikupärastamist. • GL mehaanilised madalprofiililised lülitid • Tri-mode ühendus: Lightspeed, Bluetooth, juhtmega • 23 mm õhuke disain • LIGHTSYNC RGB valgustus • KEYCONTROL kuni 15 funktsiooni klahvi kohta
The new 90-degree fitting from Alphacool's Enterprise Solutions series was developed especially for Alphacool's TPV hoses. The screw-on nozzle rotates and uses a double O-ring system to prevent leaks. Technical DataDimensions (L x W x H)35 x 27 x 18 mmMaterialbrass/aluminiumPressure test8 barThreadG1/4"Thread length5,5 mmHose size12,7 / 7,6 mm
The new fittings from Alphacool’s Enterprise Solutions series were specially developed for the Alphacool TPV tubing. The metal connection can be tightened with the TPV hose and has a very high tensile strength. Technical Data: Material: Brass/Aluminium Colour: Black Length: 24 mm Diameter: 18 mm Thread: G1/4" Hose size: 12,7 / 7,6 mm
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The slanted edges of the nut make sure the O-ring sits tight against the HardTube, so that it is even more secure than in its predecessors. This provides more security in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: HardTube Compression Fitting 16mm This connector has a 1/4" outer thread. The other side fits HardTubes with an outer diameter of 16mm. Technical Details Material: brass Colour: chrome Dimensions Diameter: 21mm Height: 18mm Scope of Delivery 1x Alphacool Eiszapfen 16mm HardTube compression fitting G1/4 for plexi- brass tubes (rigid or hard tubes) - knurled - chrome sixpack
The Alphacool Eiszapfen 16mm off set fitting rotatable G1/4 OT to G1/4 IT is an offset piece with one female thread and one male thread that can be easily integrated into any water circuit. Integration made easy The offset piece is very compact and can be integrated into any water circuit thanks to its G1/4" female and male threads. It is simply screwed to the corresponding G1/4" connections at any position in the water circuit. Design The threads are 5mm deep and high respectively, allowing for the very compact design. Thus, the L-connector can be installed very space-saving in the system. Compatibility: G1/4" OT/IT connectors Technical data L x W x H 30mm x 25,5mm x 18mm Material brass Color chrome Threads G1/4" IT, G1/4" OT Thread depth 5mm Thread height 5mm
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: HardTube Socket 13mmThis connector has a ¼” external screw thread on one side. The other side fits HardTubes with an external diameter of 13mm. Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Diameter: 21mm Height: 16mm Scope of Delivery: 1x Alphacool Eiszapfen 13mm HardTube compression fitting G1/4 for plexi- brass tubes (rigid or hard tubes) - knurled - deep black
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: HardTube Socket 13mmThis connector has a ¼” external screw thread on one side. The other side fits HardTubes with an external diameter of 13mm. Technical Specifications: Material: Brass Colour: Chrome Dimensions: Diameter: 21mm Height: 16mm Scope of Delivery: 1x Alphacool Eiszapfen 13mm HardTube compression fitting G1/4 for plexi- brass tubes (rigid or hard tubes) - knurled - chrome
With the Alphacool Eiszapfen you connect your hardtubes at the perfect 90° angle. The hardtube is tightly screwed to the union nut, seals immediately and can be easily loosened with one hand. Technical Details: Width: 21 mm Length: 34 mm Height: 34 mm Material: brass Color: Chrome
With Alphacool’s new compression fittings for plexi, brass or carbon tubes, Alphacool is taking another step in the direction of perfection and quality. The first two colours, chrome and deep black, offer a great variety to suit many tastes. The fully coordinated product series gives every system a chance to shine, and the customization options are endless when paired with Alphacool plexi-brass tubes! A new chromatization technique binds the colouring tightly to the brass surface. This improves the longevity of the intense colour and prevents any chipping of the chrome layer. Blue Alphacool lettering on some of the connectors also highlights the uniqueness of these parts. The function of these connectors is: This connector can be used to connect a 13mm plexi, brass, borosilicate glass, or carbon tube to a G1/4" thread. Sixpack: Since six connectors of one kind are often necessary, Alphacool is now offering Sixpacks. This has a lot of advantages for you! Technical Details: Material: chromatized brass Colour: chrome Scope of Delivery: 1x Alphacool HT 13mm HardTube compression fitting G1/4 for plexi-brass tubes (rigid or hard tubes) - knurled - chrome sixpack
Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings! Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Model: 45° compression fitting 13mm plexi / brass tubesThis fitting is suitable for 13mm plexi or brass tubes on both sides. This fitting is bent 45° in the middle to avoid complicated hose connections. Technical Specifications Material: brass Colour: deep black Dimensions Length: 46mm Width: 20mm Height: 33mm Scope of Delivery 1x Alphacool Eiszapfen 13mm HardTube compression fitting 45° L-connector for plexi- brass tubes - deep black Fitting MapYou can find an interactive map of all Alphacool fittings here.
Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings! Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Model: 45° compression fitting 16mm plexi / brass tubesThis fitting is suitable for 16mm plexi or brass tubes on both sides. This fitting is bent 45° in the middle to avoid complicated hose connections. Technical Specifications Material: brass Colour: chrome Dimensions Length: 46mm Width: 23mm Height: 36mm Scope of Delivery 1x Alphacool Eiszapfen 16mm HardTube compression fitting 45° L-connector for plexi- brass tubes - chrome Fitting MapYou can find an interactive map of all Alphacool fittings here.
The Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details Material Brass Colour White Hight 20 mm Diameter 22 mm Thread length 5 mm Thread G1/4“ HardTube size 13 mm Compatibility PETG, acrylic, brass and glass tubes Weight 23 g Download Datasheet PDF: Alphacool Eiszapfen PRO 13mm HardTube Fitting G1/4 - White Sixpack Fitting Map: You can find an interactive map of all Alphacool fittings here.
Alphacool HF quick release connector with bulkhead G1 / 4 IG - ChromeAlphacool's new quick-release coupling sets have been newly developed to offer extra security. For this reason, these couplings do not use a "click" mechanism but are bolted with a nut. The couplings can be no longer accidentally unlocked.The couplings do not affect the flow rate of your loop. When unlocking both sides of the coupling sealed completely.They have a ¼” internal thread on both sides so your choice of fitting can be used.Technical specifications:Dimensions (L x D): 60.3 x 26,1mmMaterial: brass blackThread: 2x 1/4 "Scope of supply:1x Alphacool HF quick release connector kit G1/4 inner thread - Deep Black
Alphacool HF quick release connector with bulkhead G1 / 4 IG - ChromeAlphacool's new quick-release coupling sets have been newly developed to offer extra security. For this reason, these couplings do not use a "click" mechanism but are bolted with a nut. The couplings can be no longer accidentally unlocked.The couplings do not affect the flow rate of your loop. When unlocking both sides of the coupling sealed completely.They have a ¼” internal thread on both sides so your choice of fitting can be used.Technical specifications:Dimensions (L x D): 63.9 x 26,1mmMaterial: brass blackThread: 2x 1/4 "Diameter bulkhead thread: 16mmSchott Thread Length: 15mmScope of supply:1x Alphacool HF quick release connector with bulkhead G1 / 4 IG - brass black
Alphacool's new quick couplers with the name "Eiszapfen" are the next block in the "Eis" series. High quality and impressive features makes any watercooling system back to a piece of high-quality and practical! A quick coupling is used everywhere where expandability, flexibility and cleanness play an important role. These compact couplings have a 1/4 "thread on both sides with which they are compatible with all standard connections. By pulling down the outer ring these couplings can be disconnected. Both sides close immediately completely tight so that no water can escape. Thanks to the special N.D.S.L. Technology (no drip, no splash, no leak) a leak, drip or splash out of the water on opening the lock is excluded. By assembling again, both sides must click into each other audibly and shut themselves tightly by a double O-ring, which is simply compressed when plugged together.Likewise, the mechanism was designed for durability to ensure a secure connection even years. Many quick couplings usually also affect the flow rate. But Alphacool has found a way to resolve this issue. A high flow rate is maintained at these quick couplings! Alphacools quick couplers are available in two finishes. In deep black and fully chromed these add seamlessly on every system. Technical Details: Dimensions (L x D): 64,6 x 23,9mm Material: Brass Colour: Chrome Thread: 2x 1/4" internal thread Scope of Delivery: 1x Alphacool Eiszapfen quick release connector kit G1/4 inner thread - Chrome
Alphacool's new quick couplers with the name "Eiszapfen" are the next block in the "Eis" series. High quality and impressive features makes any watercooling system back to a piece of high-quality and practical! A quick coupling is used everywhere where expandability, flexibility and cleanness play an important role. These compact couplings have a 1/4 "thread on both sides with which they are compatible with all standard connections. By pulling down the outer ring these couplings can be disconnected. Both sides close immediately completely tight so that no water can escape. Thanks to the special N.D.S.L. Technology (no drip, no splash, no leak) a leak, drip or splash out of the water on opening the lock is excluded. By assembling again, both sides must click into each other audibly and shut themselves tightly by a double O-ring, which is simply compressed when plugged together.Likewise, the mechanism was designed for durability to ensure a secure connection even years. Many quick couplings usually also affect the flow rate. But Alphacool has found a way to resolve this issue. A high flow rate is maintained at these quick couplings! Alphacools quick couplers are available in two finishes. In deep black and fully chromed these add seamlessly on every system. Technical Details: Dimensions (L x D): 64,6 x 23,9mm Material: Brass Colour: Deep Black Thread: 2x 1/4" internal thread Scope of Delivery: 1x Alphacool Eiszapfen quick release connector kit G1/4 inner thread - Deep Black
Alphacool's quick-release coupling sets have been newly developed for safety reasons. For this reason, these couplings do not have a "click" mechanism but are screwed on with a type of union nut. This means that the couplings can no longer be accidentally unlocked. By installing these couplings, the flow is only slightly or not at all affected. When unlocked, both sides of the coupling seal completely. There is a connection for 11/8 hose on both sides. Technical data: Dimensions (LxD): 83 x 28mm Material: plastic black Hose connection: 2x 11/8mm Scope of delivery: 1x Alphacool HF quick release coupling set 11/8mm - Deep Black
Alphacool's new quick couplers with the name "Eiszapfen" are the next block in the "Eis" series. High quality and impressive features makes any watercooling system back to a piece of high-quality and practical! A quick coupling is used everywhere where expandability, flexibility and cleanness play an important role. These compact couplings have a 3/8" thread on both sides.To use the standard 1/4" thread you need a adaptor from 3/8" to 1/4". By pulling down the outer ring these couplings can be disconnected. Both sides close immediately completely tight so that no water can escape. Thanks to the special N.D.S.L. Technology (no drip, no splash, no leak) a leak, drip or splash out of the water on opening the lock is excluded. By assembling again, both sides must click into each other audibly and shut themselves tightly by a double O-ring, which is simply compressed when plugged together.Likewise, the mechanism was designed for durability to ensure a secure connection even years. Many quick couplings usually also affect the flow rate. But Alphacool has found a way to resolve this issue. A high flow rate is maintained at these quick couplings! Alphacools quick couplers are available in two finishes. In deep black and fully chromed these add seamlessly on every system. Technical Details: Dimensions (L x D): 88,5 x 28mm Material: Brass Colour: Deep Black Thread: 2x 3/8" internal thread Scope of Delivery: 1x Alphacool Eiszapfen HF quick release connector kit G3/8 inner thread with reducing nipple G1/4 - Deep Black Note:The quick couplings should not be used permanently in dry condition, since the O-rings may be too much strain and tightness is no longer guaranteed.
Alphacool's new quick-release coupling sets have been newly developed to offer extra security. For this reason, these couplings do not use a "click" mechanism but are bolted with a nut. The couplings can no longer be unlocked accidentally. The couplings affect the flow rate of your loop only minimally, or not at all. While unlocking, both sides of the coupling seal completely. They have a ¼” internal thread on both sides so your choice of fitting can be used. Technical specifications: Dimensions (L x D): 60.3 x 26.1mm Material: Plastic black Thread: 2x 1/4 " Scope of delivery: 1x Alphacool HF quick release connector kit G1/4 - black
The new HF quick release couplings from the Alphacool Enterprise Solutions series have been developed especially for the Alphacool TPV hoses. Thanks to a barrier rim, they have a very high tensile strength, which consists of a metal ring and clings to the hose with hooks. Furthermore, this quick-release coupling uses screw caps that are unlike other screw caps. These prevent the fitting from opening easily due to vibrations or movements. The double seal guarantees maximum tightness. The quick release fittings do not only stand for safety, but also for longevity. As they are made of nylon, they are extremely resistant and can be used with copper and aluminium parts in the water loop without any problems, because nylon does not react with other materials. Technical Data: Material: Nylon Colour: Black Length: 95 mm Diameter: 27 mm Hose size: 12,7 / 7,6 mm
The Eiszapfen series represents the high-end version of the Alphacool product series. It is designed to appeal to enthusiasts and professional users and offer them the best in quality, functionality and design. How Much Water Comes out When Connecting? Thanks to an ingenious locking and sealing system and the N.D.S.L (no drip, no splash, no leak) technology, the loss of water when opening the quick release fastener is minimal. Only a tiny drop of water escapes. The closure is released simply by pulling the connecting ring. In doing so, the counterpart will automatically spring out of the quick release fastener. To connect the two pieces, simply push them together. This action is very easy and carefree. The Alphacool Eiszapfen quick-release fasteners are available in various designs but can all be combined with each other.Technical data (kit):L x D: 62,5 x 24 mmNet weight: 95 gMaterial: BrassThreads: 2 x G1/4“ OTThread length: 5 mmType of quick release connector: Push InTechnical data (coupling male):L x D: 36,5 x 20,5 mmNet weight: 32 gTechnical data (coupling female):L x D: 39,5 x 24 mmNet weight: 63 gDownlaod data sheet PDF: Alphacool Eiszapfen quick release connector kit G1/4 outer thread - Chrome
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:This Y-connector is interesting for splitting of the cooling loop for parallel cooling of components. The adaptor with its 3 revolvable 1/4“ threads allows incredible freedom of choice in regard to fittings and hose routing. Technical specifications:Material: Brass, chromatizedColour: Deep Black Dimensions:Length: 46mmWidth: D18mmHeight: 51mm Extent of delivery:1 x Alphacool HF Y connector 3 x G1/4 inner thread revolvable - Deep Black This product has been reviewed for you:ModdingbaseXtremesystems (Engl.) (userreview)PT-reviews (Pt)
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:This angled adaptor can be used to elegantly work around obstacles in the system. The 45° angle and the revolvable design allow easy adjustments after the adaptor is installed. The two inner threads give freedom of choice regarding fittings, making this adaptor an essential helper for your system. Technical specifications: Material: Brass, chromatizedColour: Chrome Dimensions:Length: 40mmWidth: D18mm Extent of delivery:1 x Alphacool HF L- connector 90°2 x G1/4 inner thread revolvable - Chrome This product has been reviewed for you:ModdingbaseXtremesystems (Engl.) (userreview)PT-reviews (Pt)
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:This angled adaptor can be used to elegantly work around obstacles in your system. The G1/4“ inner threads allow maximum fitting compatibility. Technical specifications: Material: Brass, chromatizedColour: Chrome Dimensions:Length: 45mmWidth: D18mm Extent of delivery:1 x Alphacool HF angled adaptor 45° 2x G1/4 inner thread revolvable - Chrome This product has been reviewed for you:ModdingbaseXtremesystems (Engl.) (userreview)PT-reviews (Pt)
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:This manifold is very practical and offers many advantages thanks to its innovative design: Barely any thread length restrictions, almost no flow resistance and mounting possibilities are aplenty. The best thing: This manifold even offers 5 In- respectively outlets. Technical specifications: Material: Brass, chromatizedColour: Chrome Dimensions:Length: 45mmWidth: 17mmHeight: 17mm Extent of delivery:1 x Alphacool HF 5-way connection terminal G1/4 inner thread - Chrome
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:This angled adaptor can be used to connect a fitting of your choice at a 90° angle and revolvable to a G1/4“ thread. Notice Alphacool recommended for correct operation of the water cooling distilled water! Technical specifications:Material: Brass, chromatizedColour: Chrome Dimensions:Length: 30mmWidth: 12x18mmHeight: 26mmThread size: 1/4“ Thread length: 5mm Fitting inner diameter: 9,7mm Key width counter nut: 27mm Extent of delivery:1 x Alphacool HF angled adaptor 90° G1/4 outer thread to G1/4 inner thread revolvable - Chrome This product has been reviewed for you:ModdingbaseXtremesystems (Engl.) (userreview)PT-reviews (Pt)
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:This angled adaptor can be used to connect a fitting of your choice at a 90° angle and revolvable to a G1/4“ thread. Technical specifications: Material: Brass, chromatizedColour: Deep Black Dimensions:Length: 30mmWidth: 12x18mmHeight: 26mmThread size: 1/4“ Thread length: 5mm Fitting inner diameter: 9,7mm Key width counter nut: 27mm Extent of delivery:1 x Alphacool HF angled adaptor 90° G1/4 outer thread to G1/4 inner thread revolvable - Deep Black This product has been reviewed for you:ModdingbaseXtremesystems (Engl.) (userreview)PT-reviews (Pt)
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute!The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing!With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. Functionality of this connector:This adaptor can be used to extend a fitting of your choice. This element is not revolvable, making it ideal to give a fixed direction to the fitting.Technical specifications:Material: Brass, chromatizedColour: ChromeDimensions:Length: 9,75mmWidth: D18mmExtent of delivery:1 x Alphacool HF extension G1/4 to G1/4 - Chrome Please note: If you want to use the Alphacool SLI bridge, then you need 2x the extention (Alphacool 11152 / Aquatuning 1011043) for each graphic card water block. This product has been reviewed for you:ModdingbaseXtremesystems (Engl.) (userreview)PT-reviews (Pt)
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Double 45° Angle AdapterThis adapter has two 45° angles. The adapter is rotatable between each angled corner. One side has a rotatable ¼” external screw thread and the other side has a ¼” internal thread. This adapter is useful for hard-to-reach places. Technical Specifications: Material: Brass Colour: Chrome Dimensions: Length: 41,5mm Diameter: 18,5mm Scope of Delivery: 1x Alphacool Eiszapfen angled adaptor double-45° rotatable G1/4 outer thread to G1/4 inner thread - chrome
The Alphacool Eiszpafen connection terminal with 4x G1/4" internal threads offers versatile possibilities to expand the water circuit with different components. Material and patented sealing plugsIn order to save as much weight as possible, the connection terminal is made entirely of acetal, resulting in a total weight of only 20g. Two sealing plugs made of acetal included. To keep the design of the cube-shaped adapter even on all sides, Alphacool uses the patented sealing plugs. These close flush to the surface and are already in use with some Alphacool products.What can I do with it?With such an adapter, parallel circuits can easily be realised. Or you can use it to integrate a drain tap into the circuit. Of course, temperature sensors can also be mounted on it. It is also possible to split and merge circuits. You can also simply use the adapter as a fancy elbow. The possibilities are extensive.Technical dataL x W x H:26,5 x 26,5 x 26,5 mmWeight: 20 gMaterial: AcetalConnection: 4x G1/4“ inner threadDownload Datasheet PDF: ENG_1019900_Alphacool_Eiszapfen_connection_terminal__black_Acetal_data_sheet.pdf
The Alphacool Eiszpafen connection terminal with 5x G1/4" internal threads offers versatile possibilities to expand the water circuit with different components. Material and patented sealing plugsIn order to save as much weight as possible, the connection terminal is made entirely of acetal, resulting in a total weight of only 20g. Three sealing plugs made of acetal included. To keep the design of the cube-shaped adapter even on all sides, Alphacool uses the patented sealing plugs. These close flush to the surface and are already in use with some Alphacool products.What can I do with it?With such an adapter, parallel circuits can easily be realised. Or you can use it to integrate a drain tap into the circuit. Of course, temperature sensors can also be mounted on it. It is also possible to split and merge circuits. You can also simply use the adapter as a fancy elbow. The possibilities are extensive.Technical dataL x W x H:26,5 x 26,5 x 26,5 mmWeight: 20 gMaterial: AcetalConnection: 4x G1/4“ inner threadDownload Datasheet PDF: ENG_1019901_Alphacool_Eiszpafen_connection_terminal__black_Acetal_data_sheet.pdf
