The mANT LTE is an omnidirectional antenna specifically designed for LTE frequencies. It is an excellent companion to our LTE devices, such as the wAP LTE and LtAP series. The antenna has a 5 dBi gain, improving your connection in the areas with inadequate LTE service coverage, allowing you to increase your connection speed. Antenna gain5Beamwidth360°Connector2 x SMA femaleDiameter x Depth129 x 129 x 34 mmFrequency Range699 - 2690 MHzOperating Temperature-40°C .. +70°C tested
The ultimate heavy-duty home lab router with USB 3.0 1G and 2.5G Ethernet and a 10G SFP+ cage. Also available is the K-79 kit with that you can mount four of these new routers in a single 1U rackmount space! Unprecedented processing power in such a small form factor.The board features 9 wired ports and a full-sized USB 3.0. Seven of the ports are Gigabit Ethernet another one is 2.5 Gigabit Ethernet and the last one is a 10G SFP+ cage. All the ports are connected to a powerful Marvell Amethyst family switch-chip with a 10 Gbps full-duplex line leading to the Marvell Armada Quad-core ARMv8 1.4 GHz CPU. Both CPU and the switch-chip are located on the bottom of the board – so the case acts as a massive heat-sink!RB5009UG+S+IN can be powered in 3 different ways: PoE-in from Ethernet port #1 or DC Jack or 2-pin terminal on the side.Boards come with 1GB of DDR4 RAM and 1GB NAND storage. This combination of ports and components compared to our other products in a similar form factor provides almost double the performance in configurations with heavy CPU loads.With a simple set of mounting accessories you can mount FOUR of these routers in a single 1U rackmount space! No more server-room-Tetris just pure productivity.
Case OMP3 300x300x120 mm Flush-mounted OMP case is a perfect solution for a neat and safety telecom cables assembly as well as connectors and valves. Mix of aesthetic finish with practical application. Made of solid corrosion protected sheet of steel. Additional comfort of mounting given by easy to install doors with possibility of choice a side of the door (left- or right-handed). Doors equipped with patent lock (pair of keys included). Case with easy-removable perforated holes in both top and down side. Flush-mounted construction provides neat and aesthetic assembly.
ALFA AWUS036ACHM is a long range dual band USB WiFi adapter compatible with Microsoft Windows PCs. It features an RP-SMA antenna port and a 5 dBi dual-band antenna. The antenna is detachable and can be upgraded. It also has a power amplifier that increases it's reception range compared to ALFA's single antenna 802.11n products.This is capable of receiving and transmitting on both the 2.4 GHz and 5 Ghz bands. With 802.11ac standard routers AWUS036ACHM can achieve throughput speeds up to 433 Mbps. This adapter is backward compatible with 802.11n WiFi routers but will have limited speed with those networks. An 802.11ac router is required for the maximum throughput.
MT48-570080-11DG is 57 V 0.8 A power supply. It's part of our GPEN concept that provides all the benefits of GPON but utilizes well-proven simple and inexpensive Ethernet solutions.MT48-570080-11DG allows using long Ethernet cable runs and multiple GPER units - please refer to the table in the last page of GPEN concept brochure in the link below.
The quickMOUNT extra is a advanced wall mount adapter for large point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT extra gives possibility to turn antenna within 190°. With the quickMOUNT extra is compatible with our long range heavy antennas like 30dBi parabolic dish mANT 30 or 19dBi sector mANT 19s.
The GPEN21 is a smart power injector that serves as an advanced software controlled repeater. Not only can it power your uplink devices via PoE it can also provide a range of useful software features: Interface management and monitoring GPEN link fault detection VLAN support SNMP reporting Basic traffic shaping GPEN21 has an Ethernet and SFP port for fiber connectivity. Customers can choose to use GPEN21 to power optical module for uplink to provider or to provide PoE to power Ethernet uplink to provider (that uses Mikrotik GPeR and/or netPower products) The GPEN unit can be securely attached to a wall or the communications cabinet. The Ethernet cable can be routed either directly through its bottom cable opening or into the wall as preferred.
Outdoor 5G device with built-in eSIM support, powerful directional antennas, and a cutting-edge Release 16 modem – ideal for rural, urban, and IoT deployments. With Gigabit Ethernet, PoE-in, and instant MikroTik connectivity out of the box, it’s the smart, rugged choice for fast and flexible internet anywhere. IP66 certified. MikroTik Connectivity solves both issues! Log in to your MikroTik account, choose a data plan, and you’re online. This pre-activated, self-sufficient eSIM setup bridges the gap between “just installed” and “fully operational.” Ideal for remote locations, failover setups, or any place you need reliable internet right now — without any extra steps. With a powerful 16 dBi directional antenna, 4x4 MIMO support, 512 MB of RAM, a modern dual-core ARM CPU, and a wide range of supported bands, ATL 5G is built to perform — whether you’re deep in the countryside or surrounded by signal noise in the city. And with Gigabit Ethernet and PoE-in support, installation is cleaner and simpler — just a single cable for both power and data. ATL 5G features 4 high-gain middle-band antennas and 4 low-band antennas, including full Band 28 support for both LTE and 5G. That means exceptional coverage in all the frequencies that really matter, including from 700 MHz to 1 GHz — the sweet spot for rural reach and wall- penetrating reliability. These low-frequency bands are some of the most widely used by mobile operators around the world, and ATL 5G is ready to squeeze every last drop of performance from them — ensuring you stay connected where others struggle to get a bar. And when you don’t want to rely on a traditional SIM card, you can use the MikroTik eSIM as your main data plan for low-usage setups or IoT deployments like KNOTs. Or simply switch profiles and connect to your favorite mobile operator — flexibility is built in. At first glance, ATL 5G looks like a spaceship — but there’s a good reason for that. This sleek form factor prevents snow and water from collecting and freezing up, making it ideal for installations in cold, wet, or windy environments. No need to climb back up and clean the antenna after every snowstorm. The IP66-rated enclosure is fully sealed against dust and powerful water jets, so ATL 5G can handle some of the roughest weather conditions — whether it’s mounted on a snowy rooftop in the city or standing alone in the open countryside. Send purchase questions
Introducing Universal Arm Bracket (UB-AM) by Ubiquiti. Designed for wall or poles, UB-AM provides a versatile and robust solution for mounting all of your devices. Now Shipping.
hEX PoE lite is a small five port ethernet router in a plastic case it has a USB 2.0 port and PoE output. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! Max current is 1A per port Ethernet ports are shielded. It is affordable small and easy to use. With it’s compact design and clean looks it will fit perfectly into any SOHO environment.
New revision of Gigabit Ethernet Surge Protector in IP67 waterproof enclosureHere’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protectors on each end. They come sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm.Don’t forget about the grounding wire! Secure it to the rackmount mast or any other structure that is connected to the ground. For maximum protection you should use a surge protector on both ends of long cables.
2.4Ghz 5dBi Dipole antennas with RPSMA connectors. Take BaseBox2 and simply attach two of those antennas on connectors of BaseBox2 to have 2x2 MIMO 2.4Ghz AP! By this you can have "2.4Ghz OmniTik", ideal for Outdoor Campus areas, for example, campings or trailer parks. Antennas are waterproof, so you can use BaseBox without top cover if both antennas are properly attached.
Case OMP4 Flush-mounted OMP case is a perfect solution for a neat and safety telecom cables assembly as well as connectors and valves. Mix of aesthetic finish with practical application. Made of solid corrosion protected sheet of steel. Additional comfort of mounting given by easy to install doors with possibility of choice a side of the door (left- or right-handed). Doors equipped with patent lock (pair of keys included). Case with easy-removable perforated holes in both top and down side. Flush-mounted construction provides neat and aesthetic assembly.
AOA-2415 antennas are professionally engineered and manufactured with the highest industry quality at the lowest possible price providing extreme value. AOA-2415 is designed for the 2.4GHz ISM band, supporting 2.4 to 2.483 GHz and provides superb performance in IEEE 802.11b/g WiFi and Bluetooth applications.AOA-2415 includes mounting bracket and hardware for up to 2” OD masts. Made with fiberglass.
Suitable for 3G/4G LTE Routers to Connect with External AntennasCF400 - Ultra low loss characteristics ensure the maximum performance of your antenna installation
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
The USW-Pro-48-POE is a configurable Gigabit Layer2 and Layer3 switch with auto-sensing 802.3at PoE+ and 802.3bt PoE++. Forty PoE+ and eight PoE++ RJ45 ethernet ports have total 600W PoE budget, and four SFP+ ports offer 10Gbps uplink options. Near-silent cooling and a 1.3" touch LCM. Note: Layer3 will be included in later software release.
The Ubiquiti UniFi Dream Machine Pro Max is designed to meet the networking needs of both small and large-scale networks, combining high-speed connectivity with strong security features. It includes an integrated 8-port switch, dual WAN ports, and supports multiple Ethernet standards for reliable and versatile network connections. With a 5 Gbps IDS/IPS throughput, VPN support, and advanced encryption protocols, your data is well protected. The device is also user-friendly, featuring cloud-managed capabilities for easy configuration and management. Its durable aluminum/steel housing, along with high-capacity storage and memory, ensures reliable performance for any networking task. The Ubiquiti UniFi Dream Machine Pro Max is engineered to provide a secure, efficient, and scalable networking solution for both business and personal use.
EZVIZ H9c Dual 3K on nutikas Wi-Fi kaamera, mis pakub täiustatud turvalisust tänu kahekordsele objektiivile ja 3K eraldusvõimele. See kaamera katab suuri alasid ja vähendab vajadust mitme kaamera järele. Kaameral on täiustatud AI-põhine inimese ja sõiduki tuvastamine, nutikas jälgimine, 360° panoraamvaade ja värviline öörežiim. Sisseehitatud sireeni ja vilkuva tulega aktiivne kaitse aitab hoida sinu kodu turvalisena igal ajal. • Kahekordne 3K objektiiv • AI-põhine inimese ja sõiduki tuvastamine • 360° panoraamkatvus • Värviline öönägemine • Kaks suunda heli • Aktiivne kaitse sireeni ja vilkuva tulega
Direct attach cable that supports not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard!Mikrotik is releasing new direct attach cables that support not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of new CCR2004-1G-12S+2XS) for very short distances within racks and across adjacent racks. They provide a low cost low power and low latency interconnect solution for 25-Gigabit Ethernet Fiber Channel and other industry standards and are direct attached compliant and fully conform to the SFP+ MSA specifications.Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)
The newest addition to the MikroTik IoT product family – KNOT – is a truly universal device with exceptional connectivity options and protocol support. It is an IoT Gateway that uses Narrow Band and CAT-M technology. Because of the low cost low bandwidth cellular connection it is supported by countless mobile operators around the globe.KNOT can monitor onboard GPIOs convert Modbus protocol to TCP and even forward Bluetooth packets to TCP/IP network via HTTPS and MQTT. You can use the KNOT as a TCP bridge from wired Modbus sensors to send readings to a Modbus server. Yes the KNOT brings wireless connectivity to wired sensors such as electricity meters and relays. It could be used as a backup connection for the Ethernet or as a management channel for your network. NB/CAT-M monthly plan is much cheaper than LTE. Why spend extra money on bandwidth you don’t need? For example you can manage a KNOT-powered vending machine with temperature and liquid sensors with only a few megabytes per day!KNOT features so many protocol support and connectivity options: 2.4 GHz wireless Bluetooth 2x 100 Mbps Ethernet ports with PoE-in and PoE-out Micro-USB. Maximum convenience at the lowest cost! With the Bluetooth interface you can use the KNOT for asset tracking and telemetry based on Bluetooth advertisement packets. KNOT supports any BLE tag that sends advertisement data. iBeacon Eddystone or any other format. It has powerful filters for forwarding only relevant packets and ignoring others.KNOT is a great tool for most outdoor cabinet IoT applications as well. It comes with a DIN rail mount that allows easy integration with all kinds of setups: from agriculture and asset tracking to cold chain monitoring industrial manufacturing and so on.
QuMax for Teltonika RUTX09 Integrated outdoor multi band high power LTE directional antennas + GPS antenna + place to install Teltonika RUTX09 (All-in-one) QuMAX offers the most powerful directional LTE antenna of all QuWireless antennas. It is dedicated to connections with long distance to base station. It is designed to have Teltonika RUTX09 router installed inside IP67 enclosure. It is the first choice for fixed installations in industrial environment. It has embedded also GPS antenna. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support Easy to install Dual SIM – significantly reduce roaming costs
QuSpot for Teltonika RUT955 Integrated multi-band LTE omni antenna + WiFi omni antenna + GPS antenna + place to install Teltonika RUT955 (All-in-one) QuSpot omni LTE antenna for Teltonika RUT955 router is a perfect outdoor device for mobile and fixed installations like industrial, CCTV, hotspots, yachts, boats, campers, RV etc. It has embedded also omni Wi-Fi and GPS antenna. If you use RUT955 with QuSpot antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support Easy to install Dual SIM – significantly reduce roaming costs
