The UniFi Access Hub comes with versatile interfaces, including support for most electric bolts/strikes, magnetic locks, and 12V access accessories, such as motion sensors, push buttons, and alarms. The three Ethernet PoE powered reader interfaces minimize need for wiring work and offer a convenient way to add a UniFi G3-Flex surveillance camera for additional security. The seamlessly integrated UniFi Access solution is managed with UniFi Access Controller software. Easily manage users, visitors, schedules, and access policies with the intuitive browser-based interface.
The Metal is a completely waterproof and rugged outdoor wireless device with a super high output power.Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4GHz or 5GHz, up to 80 MHz wide channel). The new Gigabit port will help you utilize the full benefit of 802.11ac high speed wireless.The Metal 52 ac supports 2.4GHz, 5GHz and all the legacy wireless modes as well (802.11 b/g/n for 2.4GHz and 802.11 ac/n/a for 5GHz).Fully sealed, industrial design metal case, powered by RouterBOARD and RouterOS. With 1300mW of output power - to reach the last mile, in any conditions. The Metal comes with an AP software license, so you can attach your favorite antenna to use it as an AP, to make wireless point-to-point links or as a CPE- whatever you prefer!The Metal 52 ac includes a Dual Band 2.4/5GHz Omni directional antenna (6dBi 2.4GHz, 8dBi 5GHz), so you can use the unit right out of the box, or use your own antenna. Wireless specifications 5 GHz Transmit power (dBm)Receive SensitivityTransmit power (mW)6MBit/s31-93125954MBit/s27-78501MCS030-931000MCS726-74398MCS922-691582.4 GHz Transmit power (dBm)Receive SensitivityTransmit power (mW)1MBit/s31-97125911MBit/s31-9112596MBit/s31-93125954MBit/s28-77631MCS031-931259MCS727-72501
Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology.For devices that support Plug & Play Mesh, this functionality is extended to allow multi-hop wireless uplink – so wirelessly uplinked APs can support uplink to other wirelessly uplinked APs.Indoors/Outdoors The UniFi AC Mesh AP includes adjustable dual-band omni antennas, and you have the option to use any 5 GHz omni antenna for spot-beam coverage in high‑density locations with numerous APs and clients, like a conference hall. Expand the limits of Wide-Area WiFi Welcome to UniFi Mesh Technology UniFi creates a highly scalable, end-to-end system of devices spanning multiple locations across theworld — all controlled by a single interface accessed via the Internet or local network.
The wAP 60G and wAP 60G AP are weatherproof integrated 60GHz wireless units, that can be used indoors or outdoors in different scenarios - Base Station (only wAP 60G AP), Point-to-Point and CPE (wAP 60G AP and wAP 60G). The box includes a wall mounting kit, straps for pole mounting, power supply, PoE injector and also table stand for using the device indoors. Penetrates some windows depending on material. wAP 60G AP and wAP 60G allows to create high-speed Point-to-Multipoint setup setup in 60 GHz frequency that is not affected by the crowded WiFi spectrum. In such scenario, wAP 60G AP (comes with RouterOS L4 license for AP connections and 60 degrees antenna) can be used as Base Station / Access Point. wAP 60G AP supports up to eight simultaneous clients (wAP 60G with L3 license) on distances of 100m+. RBwAPG-60ad-A - Included Parts
5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all our products with SFP/SFP+ ports, including new RB4011 series (RB4011 series are not compatible with our passive direct attach cables S+DA0001 and S+DA0003)
• Allows adjustment both vertically and horizontally • Supports all LHG series, products, including LHG XL. • Made from metal. • Package also includes a U-bolt and a mounting kit.
Our 100 Gigabit family keeps expanding – you’ve already seen the incredible CCR2216 100 Gigabit router. Now it’s time for a matching switch – the CRS504-4XQ-IN. The small size combined with the low power consumption (25W without attachments!) is perfect to start expanding 100 Gigabit networking in everyday setups. This speed is no longer limited to data centers, ISPs, and large offices. You too can upgrade your 10 or 25 Gigabit network and join the one hundred club! There are four 100 Gigabit QSFP28 ports. Use them to connect other 100 Gigabit devices or grab a breakout cable to connect multiple 25 Gigabit devices: each port is connected to four 25 Gigabit lines, allowing you to connect 16 x 25 Gigabit devices. In fact, you can mix and match all kinds of connections this way: 100 Gigabits on one port, 40 Gigabits on the other, 4x25 Gigabits on the third, and maybe even some 10G or 1G cables on the fourth. Obviously, there is an Ethernet port for management purposes as well. We’ve been using this switch for quite some time now in the Genomics Data Network project. A high-capacity data network for our local scientists working on ground-breaking cancer treatments. Genome data can take up a lot of space, so you need exceptionally fast connections there. Also, with these devices, Latvia became the first Baltic country to establish a 100 Gigabit connection to the pan-European research network. With multiple powering options and the ability to be mounted on the wall, this switch will make any system administrator happy.
AF60 LR is a 60GHz radio designed for high-throughput connectivity over an extended range. The airFiber 60 LR features the integrated high-gain dish antenna for high speed long-range performance Point-to-Point (PtP) links. New WaveTechnology enables incredible long-range performance within the 60GHz spectrum.Includes a built-in Bluetooth management radio for easy setup. Low-Interference 60 GHz Spectrum Integrated GPS Long Range Up to 12 km Precision Alignment Mount Included link.ui.com Planning Support Quick Setup Using the *UISP™ App via Bluetooth *UNMS Controller will change to UISP™ Controller from version 1.3.0 onward.
5GHz, 26", 30dBi dual pol. antenna, need Rocket M5.Carrier Class Performance. Breakthrough Price Points. Instantly pair with Rocket M5 to create powerful 2x2 MIMO PtP Bridging applications. Rocket mount and weatherproof RF jumpers included.Rocket M Seamlessly Integrates with Rocket Dish Antenna. Rocket M and AirMax BaseStation/Rocket Antennas have been designed to seamlessly work together. Installing Rocket M on AirMax BaseStation/Rocket Antennas requires no special tools, you simply snap it into place with the mount provided with the Antennas.
mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accomodate Mikrotik Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable.The antenna comes packaged with all necessary accessories and cables.Note: Basebox wireless device pictured for illustrative purposes. It is not included.
Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports in 1U rackmount case that provides wire speed connectivity with several new switching features.It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
RBFTC11 is Fiber to Copper converter. Unlike many other media converters available on market, RBFTC11 has outdoor waterproof case with lock screw. Unit has 12-57V PoE with 802.3af/at support. Comes with PoE injector and power supply.
Sporting a sleek industrial design, the U Fiber WiFi is a robust, high‑performance GPON CPE that features an informational LED display with 4 Ethernet ports and WiFi. Features: High-Performance GPON CPELED diodes for easy diagnosticsUp to 2.4 Gbps Downstream and 1.2 Gbps UpstreamSupports up to 20 km GPON LinksPowerful Layer 2/3 Management FeaturesGPON WAN Port4x RJ45 Gigabit LAN PortSC/APC Fiber Connector802.11n Wi‑Fi Status LEDs The easy-to-read LEDs provide status information: Ethernet connection, signal strength, and power.Versatile Power The 4 Ethernet LAN ports support 10/100/1000 Mbps connections. The UFiber WiFi can be powered using 24V passive PoE on Port 1, or by 24VDC. Designed for Integration Up to 128 UFiber WiFi devices can be connected to a single GPON port. Supporting GPON links of up to 20 km, the UFiber WiFi integrates with the UFiber OLT and third-party OLT devices.
Nüüd saate välkkiiret internetti nautida liikvel olles. Mudel toetab uusimat 802.11ac WiFi-tehnoloogiat ja võimaldab kuni 32 samaaegset WiFi-klienti. Kiireima ühenduse tagamiseks ühendage seade modemiga USB-kaabli abil. Modemi aku kestab seadme kasutamisel kuni 10 tundi ja ooterežiimis kuni 300 tundi (sõltuvalt kasutatavast võrgust). Omadused: LTE 300/50 Mbps (6. kategooria) WiFi vahelduvvoolu kiirus kuni 1200 Mbps WiFi kuni 32 seadmele Suur 3000 mAh aku USB-võrguühenduse ühiskasutus
The GPEN21 is a smart power injector that serves as an advanced software controlled repeater. Not only can it power your uplink devices via PoE it can also provide a range of useful software features: Interface management and monitoring GPEN link fault detection VLAN support SNMP reporting Basic traffic shaping GPEN21 has an Ethernet and SFP port for fiber connectivity. Customers can choose to use GPEN21 to power optical module for uplink to provider or to provide PoE to power Ethernet uplink to provider (that uses Mikrotik GPeR and/or netPower products) The GPEN unit can be securely attached to a wall or the communications cabinet. The Ethernet cable can be routed either directly through its bottom cable opening or into the wall as preferred.
GESP+PoE is a passive PoE injector with surge protection. Combine it with the GESP devices for maximum security and peace of mind.Here’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protector up there. It comes sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm. Now add the GESP+POE-IN injector below the mast - to protect the switches and to power the antennas.Don’t forget about the grounding wire! Secure it to the rackmount mast or any other structure that is connected to the ground. For maximum protection you should use a surge protector on both ends of long cables.The GESP units can usually absorb multiple impacts but make sure to check their condition after each surge. For attachment of GESP units it's recommended using PVC zip ties. Just don’t make it too tight. You know what they say – hope for the best prepare for the worst. This small investment can save lots of time and money so why risk it? Grab a GESP & GESP+POE-IN and put your mind at ease!
The Ubiquiti UniFi G4 Doorbell Professional PoE Kit is a sophisticated advancement in home security technology. This smart doorbell and chime system comes with two cameras, a display, microphone, and speaker, all aimed at providing homeowners with a comprehensive security solution. It features 2-way audio, H.264 compression, and weather resistance for clear communication and durable performance. The integration of AI for event and package detection enhances its security capabilities by alerting homeowners to any activity at their doorstep. Additionally, its support for PoE simplifies installation and power management, while compliance with FCC, IC, and IPX4 standards confirms its quality and reliability. This system is ideal for those looking to monitor their home while away or to communicate more effectively with visitors, combining convenience with advanced security features.
Welcome to the forefront of networking: the future-proof CRS520-4XS-16XQ-RM with extra processing power, 4 GB of DDR4 RAM, and the best price per 100 Gigabit port we’ve seen so far. With 16x 100 Gigabit QSFP28 ports, 4x 25 Gigabit SFP28 ports, and an extra pair of 10 Gigabit Ethernet ports, this switch can bring a lot of value to complicated enterprise networks, data centers, multimedia studios, and other setups where you would typically use several devices. Now – a single CRS520 can do the trick! Avid CCR users might recognize the powerful quad-core ARM CPU running at 2 GHz, and ask – why would a switch need all that power? Two reasons: 1) CRS520 is more than a switch. You can run OSPF/BGP, out-of-band/management VPNs, ACLs, Jumbo frames and even L3HW Offloaded routing; 2) Future-proofing: as our friends at Marvell keep expanding the capabilities of their spectacular switch-chips, our in-house software team is busy exploring ways to add even more Hardware Offloaded features. You can expect software updates that will take the CRS520 to the next level! And all that without any paywalls or subscriptions. Two hot-swap power supplies and four hot-swap fans for cooling are included. This switch can also be powered by the PW48V-12V150W Hot Swap -48V DC telecom power supply, available separately.
RUTM56 on tulevikukindel topeltmodemiga ruuter, mis on mõeldud vanade ja uue põlvkonna võrkude vahelise lõhe ületamiseks. Tänu integreeritud 5G ja 4G Cat 4 modemitele tagab see pideva töö, pakkudes sujuvat tagasipöördumist 3G ja 2G võrkudesse. RUTM56 tagab kiire ja katkematu ühenduvuse koos kahe SIM-kaardi ja eSIMi toega. Koormuse tasakaalustamine, Wi-Fi 5 ja viis Gigabit Ethernet-porti optimeerivad jõudlust, samas kui RutOS koos tööstusprotokollide ja mitmekülgsete VPN-idega lihtsustab keerukaid IoT-seadistusi. See üks valmis toode võimaldab kiiret ühenduvuse kasutuselevõttu, välistades sarnaste mitme seadmega lahendustega seotud pikad seadistused ja riskid.DUAL MODEM1 x 5G & 1 x 4G Cat 4 modemidSIM ja eSIM™Automaatse ümberlülitusega, WAN-i varukoopiate ja muude ümberlülitusstsenaariumidegaPÄRANDVÕRGU TUGITagasi ühildub 3G ja 2G võrkudegaPLUG-N-PLAYValmis kasutamiseks kohe karbist välja
Unleash the Power of Wi-Fi 7 in the Modern Workplace Designed specifically for the modern workplace, the NWA130BE is equipped with a Qualcomm quad-core processor to deliver blazing-fast Wi-Fi 7 speeds of up to 11 Gbps and noticeable performance gains. Coupled with Zyxel Nebulas comprehensive suite of management and security innovations, it delivers robust connectivity and reliability that meets the enterprise-class demands of todays modern workplace. Blazing-fast Tri-Radio WiFi 7 (802.11be) AP The BE11000 Tri-Radio AP (2x2 in 2.4, 5, and 6 GHz) delivers blazing-fast Wi-Fi 7 speeds of up to 11 Gbps and lower latency for real-time response. 2.5G Ports the Right and Cost-Effective Fit The 2 x 2.5G Ethernet ports are the right and cost-effective solution, not only providing users with an easy upgrade to enjoy Wi-Fi 7 performance, but also enabling seamless integration with existing infrastructure without the need for costly re-wiring. Rectangular Design for Optimal SNR 4K QAM (MCS-13) requires high signal-to-noise ratio (SNR). The rectangular design provides excellent antenna isolation, surpassing the effectiveness of circular designs. As designed by RF First. The advanced RF filter design eliminates interference between 5 GHz and 6 GHz bands, while the built-in 4G/5G interference filter enables seamless interoperability with 4G/5G cellular networks and minimizes interference, all to ensure a smooth, interruption-free Wi-Fi experience. Flexible management to suit diverse requirements NebulaFlex allows users to switch between standalone and intuitive Nebula cloud-managed modes as needed.
Improved Noise ImmunityThe NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam blocks or spatially filters out noise, so noiseimmunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.Innovative Mechanical Design• Built-in mechanical tilt The mounting bracket conveniently offers 20° of uptilt and up to 20° of downtilt.• Quick assembly The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the NanoBeam on the pole.• Easy removal The antenna feed can be detached with the push of a button.Corrosion Resistance• Fasteners GEOMET®-coated for improved corrosion resistance when compared with zinc-plated fasteners.
airCUBE - airMAX Home Wi-Fi Access PointWith a compact design and integrated 24V PoE passthrough, the airCube™ is a home Wi-Fi access point designed to interoperate with airMAX® CPEs and is available in two models. UNMS SupportUbiquiti Network Management Software simplifies remote network management. Super Antenna Innovative Super Antenna provides wide-area coverage beyond regular Wi-Fi access points. 24V PoE Passthrough The airCube can be powered by and provide power to an airMAX CPE using 24V PoE. Sleek Design The airCube's attractive design means it can be positioned anywhere in the room, improving Wi-Fi performance.
TRB160 on ülimalt väike, kerge ja energiatõhus IoT-värav, mis on varustatud kriitilise tähtsusega LTE Cat 6, Gigabit Ethernet ja USB Type-C kaudu virtuaalse võrguliidesega, mis võimaldab samaaegselt toite ja võrguandmeid edastada. See IoT-värav suudab saavutada kuni 300 Mbit/s mobiilside kiiruse koos operaatoragregeerimisega paljudes rakendustes ja toetab mitmesuguseid tööstusklassi protokolle M2M-side jaoks.LTE CAT 6Kuni 300 Mbit/s mobiilikiirus koos operaatoragregeerimisegaUSB TYPE-CSamaaegseks toiteallikaks ja võrguandmete edastamiseksPROTOKOLLIDOPC UA, Modbus, Data to Server, MQTT, DNP3, DLMS ja muud.KOMPAKTSUSVäike suurus, lihtne paigaldus
Mount your CloudKey G2 or CloudKey G2 Plus into a 19" rack with the Cloud Key G2 Rack Mount Accessory. The Cloud Key G2 and Cloud Key G2 Plus lock securely into the back of the Rack Mount Accessory for a clean and secure installation. The Cloud Key front panel display, RJ45 ethernet connector, reset button, and status LED are exposed on the front panel for easy access.- Works with CloudKey G2 and Cloud Key G2 Plus- Front-panel ethernet port for clean installation- Includes four cage nuts and M6 bolts
Parameters Parameter Value Mounting type Flat surface mount Material ABS + PC plastic Weight 2x5 g Screws included Philips Pan Head screw #6-32×3/16 2pcs Dimensions 25 mm x 48 mm x 7.5 mm RoHS Compliant ✔ * - Teltonika devices are shown for demonstration purposes only and sold separately!
A longer version of our 100 Gigabit QSFP28 direct attach cable. This cable is 3 meters long – the perfect length to reach all the necessary spots while keeping your server room neat and tidy. Connect any two MikroTik 100 Gigabit heroes (CCR2216 & CRS504) without a hassle - this cable has integrated QSFP28 modules. Just plug it in and enjoy the speed! The cable is 3 meters long – the perfect length to reach all the necessary spots while keeping your server room neat and tidy. It is fairly flexible – you can keep your devices apart or on top of each other.
