Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower, and in other situations. For using with RouterBOARDS that support 10-28V PoE powering, input needs to be at least 18V to accomodate any losses in cables.
TSM-B1 is the stainless steel ratchet mount with versatile four-way design that adapts easily to deck or side mounting on slanted or level surface. The quick action handle makes raising and lowering the antenna easy and return the antenna to its correct, upright position. With TSM1, you could easy mount with ALFA Tube series device.
Overview Alfa Power over Ethernet (PoE) Splitter PD-1000D (support DC output 5V, 9V, 12V, 18V) is revolutionary technology for powering Ethernet terminals such as IP Telephone sets, wireless access point, and Internet camera. The technology incorporates electrical power onto a LAN data line enabling the delivery of operating power in addition to data communicate to terminals over standard cabling infrastructure. Key Features · Convey power and data to your LAN equipment through Ethernet cable. · Standard IEEE802.3at/af. · Support 5V, 9V, 12V, 18V output adjustable. · Regulate output voltage by switch. · Delivering power and data to equipment. · Support Gigabit Ethernet. · Additional +/- 15KV of Ethernet isolation for ESD/Surge Protection.
8 PORT POE INJECTOR GIGABIT supports 10/100/1000M Ethernet, LAN RJ45 sockets is for Switch/PC/HUB 1/2 & 3/6 & 4/5 &7/8 are transmitting data. FEATURES: – Use with any ethernet switch– Flexible power(DC 12V TO 57V)– 10/100/1000Mbps Gigabit Ethernet– Ideal for IP Cameras,VOIP,WiFi– 8 Port Injector(8 Lan & 8Lan + PoE port) OVERVIEW 8 PORT POE INJECTOR GIGABIT supports 10/100/1000M Ethernet, LAN RJ45 sockets is for Switch/PC/HUB 1/2 & 3/6 & 4/5 &7/8 are transmitting data. POE RJ45(power+data) socket is to deliver data and power. Pin 1/2 & 3/6 & 4/5 & 7/8 transmitting data, Pin 4/5(+) & 7/8(-) is for power. Passive PoE is composed of 4 set of RJ45 sockets and one 60V DC power jack. Input power requests 90W or more AC to DC power converter. The input DC hole diameter is 2.1mm and the other end OD is 5.5mm.The sum total output power must be lower than the Max input power of AC-DC power converter. If not, it is necessary to consider taking higher AC-DC power converter. There commended formula for AC-DC power converter is: 10W per RJ45 set (1 set = 2 x RJ45 sockets). For example, 8 x 10W = 80W for 8 port Passive PoE panel LED Indicator POWER LED:-POWER OFF –Off– 4/5 (V+),7/8 (V-) - Green LED– 4/5 (V-),7/8 (V+) - Red LED SPECIFICATIONS Input: 12-57V DC 2.1MM, Phoenix 3.5mmOutput: 12-57V PER PORT(1A Max)Data: 1/2&3/6&4/5&7/8Power: 4/5 & 7/8Data In: Connects PC/HUB/SwitchWeight: 160gDimensions: 180mm×60mm×25mmEthernet Cable: TIA/EIA 568 Cat. 5Data rate: 10/100/1000MbpsConnector: RJ-45Operating Temperature: 0°C ~ 40°CStorage Temperature: -40°C~+70°COperating Humidity: 10%~80%RHStorage Humidity: 5%~90%RHCertification: CE , FCC
4 PORT POE INJECTOR supports 10/100/1000M Ethernet, LAN RJ45 sockets is for Switch/PC/HUB 1/2 & 3/6 & 4/5 &7/8 are transmitting data. FEATURES: – Use with any ethernet switch– Flexible power(DC 12V TO 57V)– 10/100/1000Mbps fast ethernet– Ideal for IP Cameras,VOIP,WiFi– 4 Port Injector(4 Lan&4 Lan+PoE port) OVERVIEW 4 PORT POE INJECTOR supports 10/100/1000M Ethernet, LAN RJ45 sockets is for Switch/PC/HUB 1/2 & 3/6 & 4/5 &7/8 are transmitting data. POE RJ45(power+data) socket is to deliver data and power. Pin 1/2 & 3/6 & 4/5 & 7/8 transmitting data, Pin 4/5(+) & 7/8(-) is for power. Passive PoE is composed of 4 set of RJ45 sockets and one 60V DC power jack. Input power requests 90W or more AC to DC power converter. The input DC hole diameter is 2.1mm and the other end OD is 5.5mm.The sum total output power must be lower than the Max input power of AC-DC power converter. If not, it is necessary to consider taking higher AC-DC power converter. There commended formula for AC-DC power converter is: 10W per RJ45 set (1 set = 2 x RJ45 sockets). For example, 4 x 10W = 40W for 4 port Passive PoE panel. LED Indicator POWER LED:POWER OFF –Off4/5 (V+),7/8 (V-) Green LED4/5 (V-),7/8 (V+) Red LED Input: 12-57V DC 2.1MMOutput: 12-57V PER PORT(1A Max)Data: 1/2&3/6&4/5&7/8Power: 4/5 & 7/8Data In: Connects PC/HUB/SwitchWeight: 85gDimensions: 115mm×45mm×25mmEthernet Cable: TIA/EIA 568 Cat. 5Data rate: 10/100/1000MbpsConnector: RJ-45Operating Temperature: 0°C ~ 40°CStorage Temperature: -40°C~+70°COperating Humidity: 10%~80%RHStorage Humidity: 5%~90%RHCertification: CE, FCC
The AF-11FX-DUP features a unique modular design to suit multiple frequency configurations. Each AF-11FX radio can be configured to support any allowable frequency by simply changing the duplexers for high-band or low-band use in the 10.7 to 11.4 GHz allocation. Each duplexer has a low channel and a high channel that can be configured by simply reversing the position of the duplexer. Reversible Duplexers Each duplexer has a low channel and a high channel that can be configured by simply reversing the position of the duplexer.
The APOE03GR is the Single-Port Gigabit ( 10/100/1000 Base-T) redundant PoE Midspan/Injector with Reset function that provides DC power for PoE equipped Network Appliance device. It is compatible with devices that support the IEEE 802.3af/at standard PoE power feed using Mode B (Pins 4/5 and 7/8). The Reset button feature only work in certain AlfaModels. The APOE03GR features terminal block for Power redundancy, the power redundancy ensures that vital network capabilities are always available when needed, and also makes life easier for any IT Administrator who just doesn't want to have his sleep or his weekend interrupted by an untimely service call caused by a finicky power supply.** PD-side Reset circuit available upon request ** Function: Transform DC through RJ-45 cable PIN# 4,5,7,8, into remote devices such as Wireless AP, IP Phone, IP surveillance Camera, etc. With the terminal block connector can be connected to the UPS allowing redundancy in the power source. Key FeaturesInput:1.1 Input Voltage: 5Vdc to 57Vdc, Nominal = 48VdcGeneral Description:2.1 Operation Temperature: -0 ~ 402.2 Storage Temperature: -20 ~ 602.3 Operation Humidity: 10% ~ 80% Non-Condensing2.4 RJ-45 Connector PinOut2.5 DC Power Plug Diameter: 2.1Ø / 5.5Ø , Length: 12 ± 0.5mm2.6 DC Power Plug Polarity: Inside (+), Outside (-)PIN Define RJ-45 Input ( Data ) RJ-45 Output ( Data & Power )PINSymbolSymbol1TXRX A+TXRX A+2TXRX A-TXRX A-3TXRX B+TXRX B+4TXRX C+TXRX C+ DC+5TXRX C-TXRX C- DC+6TXRX B-TXRX B-7TXRX D+TXRX D+ DC-8TXRX D-TXRX D- DC-
Patch cable feature high quality and high performance transmission reliability and long life. It is equipped with protection and reduces crosstalk between pairs. This protection is done in a special thin design which ensures that the patch cable can be used in any patch panels or active device. All patch cables are thoroughly tested to meet international standards. Specifications: Category: Cat5e Supported protocols: 1000BaseT 1000BaseTX Length: 2 m Color: blue Wires: AWG24 stranded Insulation: Polyethylene Jacket: PVC Connector Type: RJ45 Storage Temperature: -20 ° C to 60 ° C Operating temperature: -20 ° C to 60 ° C Maximum Humidity: 90% Type of package: a package with EAN Certification: RoHS
Patch cable feature high quality and high performance transmission reliability and long life. It is equipped with protection and reduces crosstalk between pairs. This protection is done in a special thin design which ensures that the patch cable can be used in any patch panels or active device. All patch cables are thoroughly tested to meet international standards. Specifications: Category: Cat5e Supported protocols: 1000BaseT 1000BaseTX Length: 2 m Color: red Wires: AWG24 stranded Insulation: Polyethylene Jacket: PVC Connector Type: RJ45 Storage Temperature: -20 ° C to 60 ° C Operating temperature: -20 ° C to 60 ° C Maximum Humidity: 90% Type of package: a package with EAN Certification: RoHS
Use of an antenna connected to the modem - router allows a considerable increase transmission speed by increasing the signal level. The antenna is made in microstrip technology of high-quality materials, fully resistant to weather conditions (humidity, wind, UV radiation). It is the only dual antenna of this type on the market. The antenna is tuned to the latest technology for 5G LTE frequency 700 - 800 MHz.The antenna has been specially designed for Internet access services in the network 5G PLAY CYFROWYPOLSAT, Plus GSM, Orange, T-Mobile, Aero2, and other GSM operators around the world. The antenna has a gain of up to 14dBi and helps you to improve your connection even on long distances. To get the best result the 2G/3G/4G/5G antenna should aligned exactly to the transmitter base station it is connected to. Improves range of services at the LTE 5G, 4G, 3G, 2G from 700 MHz to 950 MHz This 4G antenna works perfectly with LTE / 4G devices which have external antenna port. Compatible 4G Routers with external SMA female antenna port: - Telekom Speedport LTE, Speedport LTE II - Telekom Speedbox LTE, SpeedBox LTE II, SpeedBox LTE III - Telekom Speedport Hybrid - Vodafone Easybox 904 LTE - Vodafone B1000, B2000, B3000 - Vodafone LTE-Modem - Vodafone LTE-Turbobox LG FM300 - O2 LTE Router - FritzBox LTE- Router (except FritzBox LTE 6842) - D-Link DWR-921 - Huawei B390, B593, B890 - Huawei E5186 - Teltonika RUT230, RUT240, RUT500, RUT550, RUT900, RUT905, RUT950, RUT955 - Many more... The enclosure of the antenna is made of solid plastic and stainless steel. The robust, light weight and UV resistant construction is weatherproof. This allows to use this 5G antenna for outdoor appliances. The antenna is designed for mast/pole or wall handle installation. A mounting kit (angle bracket and u-clamp for 30-50mm diameter handles) is included. Product specifications Gain 2x 14dBi @ 700-950 MHz Impedance 50 Ohm Frequency Range 700-950Mhz VSWR max 1.7 Polarisation Horizontal / Vertical Beam Width 30° Horizontal, 25° Vertical Connector 2 x N female Appliance Indoor and Outdoor Operating Temperature -30° to 75° C Max wind load 200km/h Dimensions 47cm x 30cm x 15cm Weight 1.6kg Color White
Features: Panel 4 integrating passive POE injector suitable for powering up to 4 devices. The RJ45 connectors on one side are connected Ethernet ports with no power (switch) on the opposite side of the device used to connect power for Ethernet cable. Are used to power the two unused pairs of the Ethernet cable Power couples: 4,5 (positive pole) / 7,8 (negative pole)
unshieldednumber of ports: 24 x RJ-45dimensions: 19 inches 1Uequipped with a cable guidecompatible with category 5E EIA / TIA 568A / T568Bcolor coding in accordance with ISO / IEC 11801housing: made of steel sheet in black
for internal useequipped with a guide for easy fixing of cablesport designations using numberscompatible with LSA tools24x unshielded RJ45 jackstested measured with cat. 6 UTP cable on the 90m section with the Fluke Networks metermeets the requirements of category 6 UTP.
The FlexiMount XL are pole and surface mount accessories that accommodate both vertical and horizontal pole mounting applications, as well as basic flat wall mounting where minimizing the distance of the radio, relative to the wall, is important. Compared to the FlexiMount, the FlexiMount XL boasts a stronger, more heavy-duty design, a longer pole length and base, and an increased articulation angle of 180º.Suitable for vertical, horizontal, and angled poles, Mimosa’s FlexiMounts are able to be mounted inany orientation.Mimosa’s FlexiMounts come preassembled, right out out the box. They are ready for any backhaul,access point, or radio to be attached to them.Mounting OptionsPole mount with two pipe clamp, or surface mount with two screw hole points.Assembly Pre-assembled with a white powder coated finish. Mounting screws and pipe/hose clamps not included
The quickMOUNT pro is a advanced wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale. You can use the quickMOUNT pro with any pole mountable device or Mikrotiks small mounting clip with weight less than 1.5 kg.
Share your 4G data plan even when 4G tower is far wayIdeal for mobile home RV and boatThe new generation of Alfa Network 4G CampProThis is a special kit shipping in one retail box that features all of the equipment as shown on the product image designed to pick up a weak 4G signal and repeat it as your own personal hotspot. This is ideal for use during camping or in boats RVs and campers.The best affordable solution for turning 4G to a Wifi Internet HotspotUser Friendly – Mobile friendly web page supports QR code scanning for easy setup so you can enjoy Internet access in minutesVehicle Surge Protection – Special design to prevent accidental damage from vehicle spikes during ignitionIncluded in the box:– Alfa R36AH USB router– Indoor Antenna ARS -N05– Tube-4G USB receiver + 8m (26 ft) USB cable– 12V power supply for R36– Tube-4G needs no power supply draws power from the R36 via USB cable– waterproof tape and wire ties for mounting Tube to pole– R36 car/vehicle power supply adapterHow it works4G to Wifi Converter Kit – Use all three of these components above together to boost and convert a 4G signal to a Wi-Fi signal. Simply connect your computer to the R36AH via ethernet cable for a one-time configuration and setup. Put a SIM-card to the Tube-4G (make sure the SIM-card is on a 4G plan or recharged). Connect the AOA-M4G antenna to the Tube-4G receiver and then connect the Tube-4G to the USB port on the R36AH. Use the Wi-Fi scanning software built-into the R36AH that you will see during the setup wizard so you can scan for and connect to the new wireless networks in your area. Once the R36A has connected to a network you will be prompted to name and password protect your own new local Wi-Fi network offering any device within a few hundred feet the ability to use the same distant Wi-Fi signal.RangeThere is no specific range that can be computed as range can vary greatly based on environment and environmental factors like obstacles and interference. We recommend using this in an area where other devices can at least get a weak signal to the desired network such as one bar. If the environment is such that your devices cannot even see the desired network form the place of intended use the Camp Pro may not work well there.
RC10-6U-300GBSTALFLEX's Hanging cabinet is a perfect solution for installation organization and storage of: IT equipment monitoring devices alarm systems TV networks local LAN networks all the other devices in non-standard housings and in any complexed Configuration. The new STALFLEX series of rack cabinets is distinguished by an extremely easy and intuitive assembly which definitely simplifies the installation process and makes them uncompetitive to the alternative products offered by other manufacturers!Functionality of the cabinets combined with solid execution of the STALFLEX's team makes this product ideally suited for protection of delicate devices against external factors and accidental mechanical damage.Brokable cable gland.An unquestionable advantage of STALFLEX rack cabinets is an easy-to-break out plug for cabling in their lower and upper part (each with dimensions: 80 mm x 40 mm +/-1/2 mm).This gives various possibilities for cable entry while ensuring convenient wiring installation and easy correct assembly of any devices.Doors easy to assemble.Additional installation comfort is ensured by the easy-to-install door with the option of choosing (right / left). The doors are closed with a patent lock (in the set with a set of two keys).The depth level of front brackets can be adjusted!In order to ensure maximum freedom in arranging the internal space of the cabinet the two front brackets are connected to its body by means of screws.It is a solution that allows mounting the brackets at one of three depth levels (spacing of the mounting holes every 30 mm).Mounting Holes.Holes in the back of the cabinet allow it to be hung with the use of dowels.Specially designed space for convenient assembly of devices.The interior of the cabinet is designed in such a way that after mounting the shelf with the maximum permissible depth there still is free space inside: about 30 mm in its rear part - developed specifically to facilitate the installation of wiring about 60 mm in its front part - to enable safe insertion of eg Ethernet connectors or fiber optics.An additional advantage of the Stalflex rack cabinet is the lack of a back wall which facilitates free use of its internal space.EASY INSTALLATION!The product is intended for self-assembly. By purchasing this product you get a complete assembly kit with the exact instructions and accessories necessary for proper assemble of the cabinet. Thanks to uncomplicated design Stalflex's rack cabinets are extremely easy fast and intuitive to install. Width 10" Height 6U Depth 300 mm Material powder coated steel Package size 335 x 157 x 345 mm External dimensions 300 x 292 x 300 mm
Alfa ARS-N19M consists of two parts- Alfa ARS-N19 an RP-SMA 9 dBi gain dipole antenna and ARS-AS01 a magnetic docking base. It features an RP-SMA connector.This is a 9 dBi gain rubber duck antenna for use with wireless adapters that have an RP-SMA connector on them. Many PCI and some USB adapters have this type of connector. Alfa models AWUS036H AWUS036NH AWUS051NH and AWUS036NEH are all compatible with this antenna as is any other Wi-Fi adapter with an RP-SMA connector.With these antennas you may improve the power of the outgoing signal as well as enhance the receiver sensitivity for incoming signals. The improved signal gain and receiver sensitivity improve the reliability of any short-range communication since the signal can be received solidly and clearly - no more time-consuming retransmissions because of faulty received signals.These high-performance antennas are especially suited for the usage in wireless networks in companies and home applications. You will be able to provide remote and hard to reach locations with strong signals. Furthermore the antennas are ideal for large areas like storage facilities wireless hotspots and public spaces in general - everywhere you would like to enhance the range of your wireless network.This unit is brand new in OEM factory packaging (non-retail). You will receive the antenna just as shown exactly as pictured along with the magnet base.
StarterAdapterTM SMA connects to StarterDishTM antennas and provides female RP-SMA connectors - standard coaxial interface for any 3rd party radios. STA-SMA has dual linear H+V polarization.STA-SMA covers a wide spectrum of 5150 - 5950 MHz with VSWR well below 1.8 throughout the whole bandwidth.STA-SMA is a waveguide-based adapter. Since waveguide has near-zero loss the adapter introduces practically zero attenuation in the waveguide part. The transition from coaxial connectors to waveguide feeder is optimized for minimum loss as well.
Wireless outdoor motion detector that takes photos by alarm and on demand Detector Type Motion Operating temperature range −25°C to +60°C, Colour White Dimensions 206 × 108 × 93 mm
