Tootekood: BLINK 500 PRO B1GTIN: 6971008027563Kõrvaklapid
Blink 500Pro B1 2,4 GHz wirelss system viivad juhtmevaba helisalvestuse täiesti uuele tasemele. Uus seeria toob rea olulisi täiustusi, mida sisuloojad, videograafid ja otseülekannete edastajad on soovinud. Suurema leviulatusega - kuni 100 meetrit ja aku tööajaga kuni 8 tundi on kasutajatel nüüd oluliselt suurem vabadus ringi liikuda ning võttepäevi planeerida. Ühest laadimiskorrast piisab terveks päevaks! Uues kahe kanaliga vastuvõtja (RX) komplektis on kaasas mõlemad, TRS ja TRRS väljundkaablid. Need võimaldavad süsteemi ideaalselt kasutada kaamerate, salvestite, mikserpultide, kaasaegsete arvutite, nutitelefonide ja tahvelarvutitega, millel on olemas 3,5 mm pesad. Blink 500 Pro komplekti vastuvõtjast on võimalik välja võtta kas mono- või stereosignaal – seega saate kahe saatja kasutamisel soovi korral suunata ühe vestluspartneri signaali paremasse ning teise oma vasakusse kanalisse. Saatjatesse on sisse ehitatud uus muljetavaldava -39 dB tundlikkusega ring-suunadiagrammiga mikrofon. See tagab puhta ja selge heli juba saatja kasutamisel. Saatjat on hõlpsasti võimalik kinnitada särgi või krae külge. Samas toimib see ka traditsioonilise bodypack-saatjana, kui lisate komplektis kaasas oleva SR-M1 reväärimikrofoni. Saramonic Blink 500 Pro B1 seadmetega saate lisaks mikrofonist tulevale signaalile edastada juhtmevabalt ka audioseadme liiniväljundi signaali. See muudab süsteemi väga mitmekülgseks. Saate kasutada komplekti kuuluvat reväärimikrofoni, ühendada suundmikrofoni, lisada mikrofoniga peakomplekti või ükskõik millise 3,5 mm TRS väljundiga mikrofoni. Helivaljuse saate reguleerida täpselt vajalikule tasemele. Nii vastuvõtjal kui ka saatjal on suur ja selge OLED ekraan, mis võimaldab teil hoida silma peal sisendi režiimil, mikrofoni helitasemel, ühenduvusel jpm. Uus on ka seadmekomplekti karp, millel on nüüd lisaks mikrofonide kaitsmisele ka laadimisfunktsioon karbis olevast akupangast või välise toiteallika kaudu – saatjad ning vastuvõtja karpi ja liikudes ühest võttekohast teise on nad jälle laetud
PHOTTIX STAY-PUT SANDBAG II, MEDIUM. Softboxes and umbrellas are great lighting modifiers but they can easily become airborne from a gust of wind when shooting outdoors. Don´t risk damaging your flashes or studio lights. The Phottix Stay-Put Sandbags II are available in three sized and hold 3 kg/6.5 lbs, 6 Kg/13.2 lbs and 10 Kg, 22 lbs of weight and can keep a light stand firmly in place when shooting outdoors or in the studio. These are indispensable accessories. Shoot safely - always use a sandbag. Weight ca 6 kg
Quadralite 200 studio stand is a light and handy tripod for small studio flashes and speedlites. Because of its compact size and weight it´s a useful tool in studio and on location. Sections made of aluminum makes the tripod durable and stable at the same time. Maximum Height 200 cm This small stand is portable and seems to be a perfect solutions for mobile studio photographers. An universal tripod head allows to mount a wide range of studio lamps, bulbs and other equipment on it. Tripod is equipped with spring cushioning system.
Intelligent convection heater will quickly and effectively heat any space. Innovative solutions and design of the device allow you to make maximum use of its capabilities to always enjoy the right temperature. Warmth in every place. Wide, 90 degree air outlet system allows for quick and accurate heating of every room. The warm air ejection on 1.5m gives it a stable flow, so the heat reaches every angle. Fast action. The PTC ceramic heating system with an enormous power of 2000 W starts to raise the temperature after only 3 seconds from commissioning, and after only 10 seconds it reaches a stable operating level. In combination with an efficient air outlet mode, the heater heats the space to the desired temperature in a very short time. Quiet engine operation. Despite the air outlet principle, the device works very quietly. The motor is designed to emit only a minimum of sound, thanks to the use of special shaped fan blades. Despite a quiet 36 dB operation, the heater remains extremely efficient. Green design. The device was constructed using environmentally friendly materials that comply with the EU RoHS directive, which does not allow the use of substances harmful to health or the environment. At the same time, the ABS polycarbonate material used is extremely durable and resistant to high temperatures. Wireless operation. The heater can be controlled even from the bed with a remote control. The minimalist, small controller is designed to make it easy to operate. There is no need to direct it directly towards the heater, 2.4 GHz remote control can handle any position. Simplified modes of operation. An easy and intuitive way to choose between two main modes: warm and moderate air. In addition, the device has four predefined operating modes, varying in operating time and air temperature setting, designed to meet the needs of each user. Security systems. The heater is equipped with special protections to ensure maximum comfort. If the device overheats or overturns, the safety system will automatically cut off the power supply and the heater will switch off. Additionally, by connecting the convector to the Xiaomi Home application, you can turn on the child protection. Compact size. The small, compact size of the device allows it to be used in any room. With only 0.05 m2 of space it becomes comfortable to use and store. Rated power: 2000W Rated voltage: 230V Size: 230 x 220 x 608 mm
Light stand Godox 260T Air Cushioned. High quality and very sturdy studio stand. The Godox 260T is made of aluminum and is equipped with air cushioning that protects the equipment from impact damage. The tripod has three sections and it reaches 260cm height. At the end of the stand there is a standard light fitting for attaching studio lights. Maksimaalne kõrgus: 260 cm Minimaalne kõrgus: 100 cm Transpordi pikkus: 100 cm Osad: 3 Summutus: turvapadi Materjal: metall (alumiinium) Paigaldus: Valgusti standardkinnitus Maksimaalne koormus: 4,5 kg Kaal: 2 kg
Godox SA-17 Bowens Mount to S30 Mount Adapter. This Godox adapter for Bowens-mount LED lights to Projection Attachment, with its solid construction, allows you to use Godox SA-P Projection attachment with any of your Bowens-mount LED Lights for achieving a greater degree of control with your light. The adapter allows COB Bowens-mount LED lights users to release their boundless creativity by matching with SA-P projection attachment to achieve their desired effects. For users who already own S30 focusing light, now they can go beyond S30 and use the adapter to serve for a broader range of Bowens-mount LED lights. Equipped with built-in optical lens, the adapter provides excellent optical performance, asurring light output that´s even from edge to edge. Since other accessories of Godox S30 are compatible with SA-P projection attachment, via SA-17 adapter, you now have the access to the following light shaping accessories and accomplish the precision lighting and creative light effect with your own Bownes-mount lights. Giving the ability to project a controlled light beam, with three options of the aspheric optical lens.The projection attachment with lens is an optical modifier that allows the light to project a de-focused soft circle or a focused hard circle of light.
Designed for photographers on the go, the S2 Bowens Mount Bracket with Softbox & Carrying Bag Kit is a compact light modifying system for speedlights and V1 flashes, as well as the larger AD200Pro and AD400Pro flash systems. You can attach most brands of speedlight flashes onto the back of the bracket either horizontally or vertically, and the S2 bracket also features a removable block for the bigger AD200Pro and AD400Pro flash systems. At the front, a Bowens-compatible speed ring allows you to mount Bowens-mount accessories such as barndoors and snoots to shape and control your light. The S2 bracket is compact in its construction and requires no pre-assembly, so it is always ready to go. For adjusting the light direction, the bracket tilts up and down for stepless tilting, and a hole can be found at the bottom for installing an optional umbrella. Included with the product is a 60x60cm collapsible softbox for soft and even lighting and a carrying bag for storage and transport.The Grid attached to the set allows you to focus the light even more on the photographed object. Key features: - S2 bracket fits speedlights and V1 flashes. - Speedlight mount in the unit horizontally or vertically. - Removable block for mounting AD200Pro and AD400Pro off-camera flash systems. - Front-facing Bowens-compatible speed ring allows use of Bowens-mount accessories such as barndoors and snoots. - Stepless up and down tilting. - Compact system ideally suited for on-location photography. In package: - S2 Type Bowens Mount Bracket - 60x60cm Foldable Softbox - Grid - Inner Diffuser - Outer Diffuser - Carrying Bag
Designed for photographers on the go, the S2 Bowens Mount Bracket with Softbox & Carrying Bag Kit is a compact light modifying system for speedlights and V1 flashes, as well as the larger AD200Pro and AD400Pro flash systems. You can attach most brands of speedlight flashes onto the back of the bracket either horizontally or vertically, and the S2 bracket also features a removable block for the bigger AD200Pro and AD400Pro flash systems. At the front, a Bowens-compatible speed ring allows you to mount Bowens-mount accessories such as barndoors and snoots to shape and control your light. The S2 bracket is compact in its construction and requires no pre-assembly, so it is always ready to go. For adjusting the light direction, the bracket tilts up and down for stepless tilting, and a hole can be found at the bottom for installing an optional umbrella. Included with the product is a 80x80cm collapsible softbox for soft and even lighting and a carrying bag for storage and transport.The Grid attached to the set allows you to focus the light even more on the photographed object. - S2 bracket fits speedlights and V1 flashes. - Speedlight mount in the unit horizontally or vertically. - Removable block for mounting AD200Pro and AD400Pro off-camera flash systems. - Front-facing Bowens-compatible speed ring allows use of Bowens-mount accessories such as barndoors and snoots. - Stepless up and down tilting. - Compact system ideally suited for on-location photography.
This silicon fender case provides an extra laver of sound and sturdy protection for your AD20OPRO, keeping it safe from accidental smash or collision in shooting. The raised edges protect the LCD screen from scratches and avoid unintentional extrusion of the control buttons when your AD20OPRO is placed pointing up. As steady as a pedestal, this case also functions as a floor light holder, turning your AD20OPRO into a fill light simply by popping it on the floor or any flat surface. This little guard will protect your AD20OPRO during the whole shooting journey, or serve as an ideal replacement for a floor light stand. Get an AD20OPRO-PC and reassurance right now.
The Godox AC-400 Power Adapter makes it possible to supply your Godox Witstro AD400 Pro with mains power. Normally you use a battery for this, but thanks to this adapter you can now also do this via the socket, which is very useful in the studio. Never worry about battery life again! Characteristics Mains adapter for Godox AD400 Pro 100 to 240 VAC 50 / 60Hz
NANLITE AKU PANDLAGA KÄEPIDE FORZA 60 LED STUUDIOVALGUSELE. Käsikäepide, aku pannal on pandud madala kinnitusega universaalse statiivi külge. See nutikas Nanlite akukinnitus mahutab kaks Sony NP-F (L-seeria) akut Nanlite Forza 60 toiteks. BH-FZ60 käepideme abil muudad Foza 60 hõlpsasti ka liikuvate objektide valgustamiseks, heledaks värvimiseks ja videol valguse pesemise efekti loomiseks. Kui soovid saad aku käepideme kinnitada kergele valgusstatiivile ja toita NP-F akudest Nanlite Forza 60 LED stuudiovalgust. BH-FZ60 aku käepide sisaldab alalisvoolu väljundkaablit, et ühendada Nanlite Forza 60 alalisvoolu sisendpordiga.
Godox Gobo Set SA-09-004 The Godox Gobo Set SA-09 consists of six different gobos that add various effects to your light. These gobos are for the Godox S30 Focusing Light and can only be placed in combination with the separately available Godox Gobo Holder. Characteristics Six different gobos Create extra atmosphere or effect in your light For the Godox S30 Only works with the Godox Gobo Holder (not included) Warranty 2 years In the box Godox Gobo Set SA-09-004
Soojad varbad ja hea väljanägemine? Ideaalne igapäevaseks kasutamiseks ja fototööde ajal. Sokid on valmistatud 85% puuvillast, 13% polüestrist ja 2% elastaanist. Üks suurus kõigile jalgadele! Võib kanda igas olukorras. Hoidke oma varbad soojas. WANDRD Socks. Warm toes and looking good? Get off to a good start with the Wandrd Socks! Ideal for daily use and during your photography jobs. The socks are made of 85% cotton, 13% polyester and 2% elastane. Can be worn in all circumstances. Keep your toes warm. Great for keeping your toes warm but not so great as a makeshift lens cover.
Quadralite Boom Multi Basic is a studio light stand that combines the best features of the Quadralite Boom tripod and the popular AIR 395 model. The stand has air cushioning in its largest section. This light stand comes from the BASIC line characterized by the excellent quality of workmanship known from Quadralite products offered at a very attractive price. The structure is made of durable aluminum profiles, ensuring adequate stability even under heavy loads. Boom lighting stands are perfect for situations where we need to place the lamp over the photographed object. Thanks to the dedicated point enabling the location of the counterweight, it is possible to properly balance the entire structure, which ensures safe and comfortable work in the studio. ● The compact size of the lightstand allows for easy transport, ● Perfect for outdoor sessions, ● Thanks to durable aluminum profiles, the structure ensures adequate stability under heavy loads, ● 400 cm of the maximum height of the tripod allows you to illuminate the studio in situations where an ordinary studio tripod is not able to reach such a height ● Possibility to obtain a functional light stand arm thanks to the pull-out column. ● 4 sections, ● Boom: 204cm, ● air cushioning in the largest section, ● attachment point for counterweight
Quadralite M-9 is a holder allowing to mount the studio flash to a tripod. Is equipped with universal tripod mount which allows to use it with almost all studio tripods. The assembly of a flash and other accessories is carried out with a spindle which comes with two threaded fittings in ¼ and 3/8 inch. The handle features an umbrella mount which enable users to easily and quickly model the flash light generated by the connected flash. The flash´s tilt angle and the umbrella may be adjusted. ● Tilt angle adjustment. ● Umbrella mount. ● Universal mount for a studio tripod. ● Option to mount accessories on a spindle with ¼ and 3/8 threads. ● Durable and solid construction made of metal.
Quadralite Verso 190 AL Basic is a lighting stand from the basic line of Quadralite Basic accessories. It is characterized by a simple design and compact size, making it an ideal solution for beginners and less demanding photographers who use lightweight portable flashes when working outdoors. This accessory is an ideal base for Quadralite Stroboss and Reporter 200 lamps and provides users with full mobility and freedom of operation in the field, being the support of small lamps. The four-section design of the Verso 190 AL Basic means that when folded, the tripod is only 49,5 cm long, which means that taking it with you, even in the amount of several pieces, will not be a problem. After unfolding, it reaches a maximum height of 190 cm, which gives a lot of possibilities in terms of positioning the lamps. The stand legs can also be folded completely flat, which increases stability and facilitates the use of additional loads, e.g. sandbags. The stand thread is non-replaceable and has a standard 1/4 ”thread. ● The compact size of the light stand allows for easy transport, ● Legs can be placed completely flat, ● Perfect for strobos and reporter lamps, ● ¼ ” thread, ● max height 190cm, ● min height 50cm, ● Transport height 49,5cm, ● 4 sections
Quadralite SVL-400 LED is an extremely lightweight and quiet lamp based on LEDs. With 40W power, the device can be easily used not only in photography but also on small film sets. COB LEDs guarantee a stable stream of light, which is characterised by high colour rendering index (CRI≥96,3) and colour temperature close to sunlight (5800K). The fresnel lens with adjustable range allows you to adjust the light beam in the range from 15 to 40 degrees. The universal Bowens mount will provide the possibility of using various light modifiers such as reflectors, softboxes and gates, allowing for even better effects during the session. The built-in cooling system protects the equipment from overheating, allowing you to use the lamp for a longer period, and the quiet operation of the fan will not interfere with the sound recording process during filming. Another important feature is the lifespan of the LED used in the lamp, which reaches 50,000 h which is the equivalent of over 5.5 years of continuous operation. The small casing and low weight make it possible to take the lamp with you on every session. ● Active cooling system, ● Small size and weight, ● Power adjustment from 5-100%, ● Color temperature: 5800K ● CRI >96,3 ● TLCI >99 ● Ability to manually adjust the light beam from 15 to 40 degree ● Maximum output power: 40W, ● High accuracy and narrow beam of light, ● 5-100% power adjustment allows you to adjust the light intensity perfectly to the situation, ● Built-in easy to read LED display indicating the current light settings and battery status, ● Powered by Sony NP-F power adapter or batteries ( sold separately), ● NP-F type batteries make the flash can also be used away from a stationary power source, ● Intuitive operation and simple interface, ● Sturdy composite housing. ● Bowens mount for mounting many useful accessories such as softboxes, gates and reflectors
Quadralite SVL-400 LED PLUS is a complete kit created for every photographer who values quality and mobility. The box contains an extremely lightweight and quiet lamp, based on LEDs. With the power of 40W, the device can be easily used not only in photography but also on small film sets. COB LEDs guarantee a stаble stream of light, which is characterised by high colour rendering index (CRI≥96,3) and colour temperature close to sunlight (5800K). The fresnel lens with adjustаble range allows you to adjust the light beam in the range from 15 to 40 degrees. The universal Bowens mount will provide the possibility of using various light modifiers such as reflectors, softboxes and gates, allowing for even better effects during the session. The built-in cooling system protects the equipment from overheating, allowing you to use the lamp for a longer period, and the quiet operation of the fan will not interfere with the sound recording process during filming. Another important feature is the lifespan of the LED used in the lamp, which reaches 50,000 h which is the equivalent of over 5.5 years of continuous operation. The small casing and low weight make it possible to take the flash with you on every session and the included bag will ensure the safety of the set during transport. The tripod bracket included in the package gives you the possibility of adjusting the angle of inclination, allowing for precise lamp positioning and umbrella mounting. ● Maximum output power: 40W, ● High accuracy and narrow beam of light, ● Power adjustment from 5-100% allows you to adjust the light intensity perfectly to the situation, ● Built-in easy to read LED display indicating current light settings and battery status, ● Mains power supply or Sony NP-F type batteries ( sold separately), ● NP-F type batteries make the flash can also be used away from a stationary power source, ● Intuitive operation and simple interface, ● Sturdy composite housing, ● Bowens mount for mounting many useful accessories such as softboxes, gates and reflectors, ● A velcro-fastened bag with two handles to hold the entire kit, ● Tripod mount with adjustаble lamp angle and umbrella attachment
Shetu Neckstrap is an essential accessory for any photographer who appreciates comfort and a custom look for their equipment. The strap is made from cotton and soft leather for durability and comfort of use. It is compatible with all camera brands and is available in a range of colors to personalize your camera to your liking.
The result is a signature soft look but with an edge of crispness (ideal for hair and makeup), that you can´t get from umbrellas and softboxes. White interior adds a bit of softness and increases the light´s throw range. An added bonus is the natural-looking catchlights that appear in the subject´s eyes. The set contains: Godox BDR-W550 beauty dish original packaging
Power, speed, and integrated radio transmission make the Ving V860III TTL Li-Ion Flash Kit from Godox a hard-to-beat option for your Pentax cameras. Fully compatible with TTL systems, the Ving V860III supports many advanced functions and features.
Manfrotto Photo Background 1.5 x 2.1 m Smoke/Concrete. Manfrotto Urban Background offers a distinctive vintage style look. Great for portraits, fashion and product photography. This versatile reversible background provides a timeless hand painted backdrop look that subtly complements the chosen subject. The darker of the two surfaces ‘Smoke’ offers a combination of grey tones with a subtle hint of green and also features a dark vignette effect. Whilst the reverse surface ‘Concrete’ offers a more evenly distributed grey tonal texture. Two great backgrounds in one with a collapsible, pop up construction that provides the photographer with a truly portаble hand painted scroll effect background that can be easily transported by car. Urban Collapsible Backgrounds: Smoke/ Concrete 1.5 x 2.1m Red Brick / Grey Stone 1.5m x 2.1m Corrugated / Metal 1.5m x 2.1m Rusty Metal / Plaster Wall 1.5m x 2.1m Distressed Paper / Grafitti 1.5m x 2.1m
Built to store your most important photo/video gear inside the Prima System and designed to capture the moments you live and travel to see quickly. The MK-1´s storage holds camera gear, drone equipment, smaller cameras, and all your accessories in a bombproof case. Made to stow perfectly inside the Prima System with an easy top and side access to all your gear. Built to store your most important photo/video gear inside the Prima System and designed to capture the moments you live and travel to see quickly. The MK-1´s storage holds camera gear, drone equipment, smaller cameras, and all your accessories in a bombproof case. Made to stow perfectly inside the Prima System with an easy top and side access to all your gear. Features Stores inside the Prima and Aegis Three access points Multiple padded dividers Two interior zipped pockets Two stretch mesh pockets Padded top carry handle Store multiple lenses/ DSLR bodies Ideal for drones & cameras 360° Hardshell Protection 500D Nylon Kodra with Barricade™ DWR spill-proof coating Hardshell protection Impact-resistant sponge EVA foam Scratch-resistant Velex liner secures protective dividers
Softboxes and umbrellas are great lighting modifiers but they can easily become airborne from a gust of wind when shooting outdoors. Don´t risk damaging your flashes or studio lights. The Phottix Stay-Put Sandbags II are available in three sized and hold 3 kg/6.5 lbs, 6 Kg/13.2 lbs and 10 Kg, 22 lbs of weight and can keep a light stand firmly in place when shooting outdoors or in the studio. These are indispensable accessories. Shoot safely - always use a sandbag. Weight ca 10 kg
Compact, lightweight 4K setup for creators, vloggers and streamers. Ready to up your vlogging game? This fully loaded kit has everything you need to record professional-quality video and audio. You get the Z 30 mirrorless camera, the compact NIKKOR Z DX 16-50mm f/3.5-6.3 VR lens, a SmallRig tripod grip, and a SmallRig Wind Muff. The tripod grip features a magnetic recess that houses the ML-L7 remote (also included). The wind muff is designed specifically for the camera’s built-in stereo microphone.
GODOX FTR-16P on raadiovastuvõtja stuudiovälklampide jaoks. Vaja on ka vastavat saatjat. The Godox FTR-16P Receiver is a wireless receiver for flash heads equipped with a 3.5mm jack trigger connection. The FTR-16P is a very economical and easy way to trigger your flash. The receiver is powered by two optional AAA batteries. Characteristics 3.5mm jack trigger connection Power supply: 2 x AA batteries
XTR-16 of USB connector wireless power-control flash receiver is designed with 2.4G wireless X-system. Transmitter Trigger for Wistro AD360/DE/QT/DP/QS/GS/GT Series
The Nanlite Mini Ball Head with Hot Shoe Adapter securely slides into your camera´s hot shoe and also offers a female 1/4"-20 receiver for stand mounting. At the top is a single action locking ball head with a 1/4"-20 male thread that is compatible with a variety of accessories. Compatible with: PavoTube II 6C, LitoLite 5C.
With this bracket, it is possible to mount up to 8 TL120 RGB tubes in one place and create unique light compositions. In package: TL-B8 Bracket, original packaging.
Using this mounting ring it is possible to attach the Fomex softbox to the studio lamp with the appropriate mounting. It is a necessary accessory to use Fomex softboxes, as they do not have a mounting kit. It is made of high quality material. It is durable and easy to install. The design of the adapter with 8 mounting holes allows for rectangular and octagonal softboxes. The adapter can also be used with Quantuum and Quadralite softboxes.
Record smooth, dynamic videos, even while riding a motorcycle on a bumpy, rough road. Insta360 accessory is equipped with 6 springs, thanks to which it effectively dampens vibrations and minimizes their impact on the operation of the camera. The product is made of high quality materials and features carefully thought out design, which ensures its exceptional strength, stability and reliability. Say goodbye to unwanted shakes in your recordings and create your best footage! Note: the vibration damper is not waterproof or dustproof. Use it only in a dry, clean environment. Included: Vibration damper Wrench
CS1625 is ideal for illuminating people and objects, compared to standard reflector, it provides more diffused and even light. It expands the beam of light, and with its foldable design, it is convenient to transport and use. Godox ML-CS1625 Silica Gel Diffusion Dome is made for for ML30 / ML30BI / ML60 / ML60BI / V1 / V860III / TT685S / AD300PRO / AD400PRO In package: ML-CS1625 softbox , original packaging.
The plates are all compatible with any of the Hähnel Procube 2 charger. Note, this is only the plate, Charger is not included. This must be purchased seperatley.
Looking for a compact travel-friendly tripod for everyday use? Then you need Billy 2.0. Perfect for travel and landscape photography Made from 8 layers of 100% pure Carbon Fibre Supports up to 18kg Billy 2.0 is constructed from 8 layers of 100% pure carbon fibre and is one of the lightest tripods in the Punks 2.0 range. Billy 2.0 is built to withstand the rigours of everyday use. Planes, Trains and Automobiles Billy 2.0 is incredibly versatile, designed for all types of photography and an ideal choice for travel, weighing in at just 1.57 kg / 3.46lbs and folding down to 45.7cm / 17.9”. Billy 2.0 is your ideal companion for photography on-the-go. Incredible range Extending to 1.66m/ 65.3” and getting as low as 11.8 cm /4.6”, Billy has a wide range of working heights and can support up to 18 kg / 40 lbs. Jaw-Dropping Like our other Punks 2.0 tripods, Billy 2.0 has three detachable tripod legs which allow for a plethora of configurations including use as a monopod or boom arm as well as a tаble-top tripod (with use of additional footwear). Travel Ready Billy 2.0´s legs counterfold around the column and head, enabling the user to get him down to just 11.8cm / 4.6". 3 Detachable Legs Like their Pro Range 2.0 and Legends Range counterparts, the new Punks 2.0 tripods boast three detachable legs, enabling conversion to monopods or booms, and with the addition of optional Vanz tripod feet (sold separately) can be made into tаbletop tripods. Max Load to Weight Ratio of 10:1 Billy 2.0 is capable of supporting loads up to 10 times his weight. With an 18kg payload, Billy 2.0 is one of the strongest tripods in this class. Locked and Loaded We’ve given our leg locks a face lift. With a fierce new look they boast improved grip and leverage due to a combination of rubber pads and knurling. We´ve added weight to our leg locks lowering their centre of gravity which makes the tripod more stаble to allow use in a multitude of conditions. Shaping The Future Our patented Tri-Mount plate has been refined and offers three hollowed spurs for accessory attachments, and enables Billy 2.0 to fold up, even when the column is detached. A Range of Footwear Billy 2.0 has detachable rubber Bootz, which can be replaced with any of our foot accessories, for maximum stability on any terrain.
GODOX CB-06 STUDIO LIGHTING TROLLEY BAG. Bag with Trolley for Three Lights. For Gemini GT and GS series flashes). Size: 94 x 34 x 25 cm The Godox CB-06 Carrying Bag is made of high quality materials. The bag has a handle for easy transport. The bag is ideal for protecting various flash or video sets. The CB-06 has removable panels and dividers.
Replacement tips for the FairyWill FW-E11 sonic toothbrush. They are equipped with excellent quality DuPont nylon bristles, which perfectly adhere to your teeth and allow you to thoroughly clean even hard-to-reach areas. You also don´t have to worry about forgetting to replace the tip. When the time is right, the blue bristles will begin to fade to remind you.
Godox AD600 PRO AC adapter AC26. Designed specifically for the AD600Pro flash, this AC Adapter from Godox allows you to plug the light into a wall socket instead of powering it with its rechargeable battery. It gives you essentially unlimited runtime, making this an ideal accessory for long studio shoots. The product is composed of the adapter itself, which goes at the back of the AD600Pro into its battery slot, and a cable for connecting to a power outlet. The adapter unit accepts 100-240 VAC power at 50 or 60 Hz, and features an on/off switch for easy operation.
With the same durable and water resistant materials as our McKinnon camera bag 25L, the Sling 8L has enough space to fit a mirrorless or small DSLR with an extra lens comfortably. We built the opening with a rigid wireframe construction for quick access and full visibility. There is a quick-latching system to make accessing your gear a breeze. On the inside of the door, there is an elastic zippered mesh pocket, and dedicated pockets for memory cards and camera batteries. Between the padded strap, and the pivoting shoulder strap to carry how you want (shoulder bag, cross body or sling carry) this sling was designed for maximum comfort. The back of the sling has an EVA foam formed back panel for comfort and air flow. There is a roller luggage pass-thru to give your shoulder a rest while traveling. On the front and bottom of the sling, there are external molle straps if you need to carry more like a tripod or jacket. BONUS: The sling fits perfectly inside the Camera Bag 35L. Features: Quick one-handed closure system Internal Molle Straps Internal organization pockets 3-way carry Custom & durable hardware Water resistant materials and zippers
Bajonettpäikesekaitse, mis minimeerib juhusliku valguse ja vähendab objektiivi helklust. Varustatud lukustusnupuga, mis hoiab ära kaitse kogemata lahtituleku. Sobib mudelile AF-S Nikkor 200-500mm f5.6E ED VR
**Create the perfect set up for you. ** This divider set is a perfect addition to your McKinnon 25L camera bag. Organize, protect and customize your camera, lenses, drone, action cams and any other gear. The Dividers are hinged in the middle to give you more options for customization. If you want to set up your Camera Bag 25L without the Cubes, this Divider Set is perfect. Features Customizable dividers and Intentional Organization 2 Large (Left and a right), 2 medium (5”) and 3 Small (3”) Dividers included Hook & loop attachment points Materials: Compression molded EVA foam with laminated Velex on both sides.
