The Xilence Performance C PWM fan series excels with an extraordinary price-performance ratio and a very good proficiency combined with a lo noise development. The black and red case fans are equipped with PWM function as well as high-quality hydro bearings and are available in 3 different sizes. Technical Details Optimal performance in every situation Hydro bearing fan Airflow-optimized rotor blades Dimensions (L x W x H), (mm): 120 x 120 x 25 Weight incl. fixed cables (kg): 0,112 Connector: 4 PIN / Small 3 PIN Air flow @ 12V (cfm / m3/h): 44.71 Noise level @ 12V (dB(A)): 22 Rated voltage DC (V): 12 Operating voltage DC (V): 6 ~ 13.8 Warranty (Years):2
Improved Cooling Performance by New Production Process The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity. Wide RPM Range The Alpine 23 CO features a new motor technology with a very wide, PWM-controlled RPM range. This keeps the noise level at a minimum while guaranteeing maximum cooling performance when needed. Lower Power Consumption & Minimum Vibration The new Alpine 23 is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5 % of the vibration from commutation of a regular DC-motor. These factors contribute towards saving energy, lowering the coil temperature and reducing vibrations to a minimum without compromising performance. For Continuous Operation The premium quality Japanese dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential. Extended Life Span A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Pre-applied MX-2 Thermal Paste The pre-applied, high-performance MX-2 thermal compound ensures fast and clean installation. Easy and fast Installation Thanks to the mounting clips, the installation is really easy. Alpine 23 is simply plugged onto the existing AMD retention modules and screwed tight. Technical Data Compatibility AMD Socket: AM4 Ram Clearance: unlimited Warranty: 6 Years Heatsink Outer Diameter: 93.4 mm Fin Material: Aluminum Number of Fins: 50 Y-shaped Fins Thermal Paste: MX-2 pre-applied Fan Fan Diameter: 90 mm Fan Speed: 100 - 2000 rpm Fan Bearing: Dual Ball Bearing Noise Level: 0.3 Sone Current: 0.06 A Connector: 4-Pin Size & Weight Lenght: 98.6 mm Width: 121 mm Height: 65 mm Weight: 275.5
Improved Cooling Performance by New Production Process The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity. Wide RPM Range The Alpine 23 features a new motor technology with a very wide, PWM-controlled RPM range. This keeps the noise level at a minimum while guaranteeing maximum cooling performance when needed. Lower Power Consumption & Minimum Vibration The new Alpine 23 is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5 % of the vibration from commutation of a regular DC-motor. These factors contribute towards saving energy, lowering the coil temperature and reducing vibrations to a minimum without compromising performance. High Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Extended Life Span A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Pre-applied MX-2 Thermal Paste The pre-applied, high-performance MX-2 thermal compound ensures fast and clean installation. Easy and Tool-free Installation Thanks to the mounting clips, the installation is really easy. Alpine 23 is simply plugged onto the existing AMD retention modules and screwed tight. Technical Data Compatibility AMD Socket: AM4 Ram Clearance: unlimited Warranty: 6 Years Heatsink Outer Diameter: 93.4 mm Fin Material: Aluminum Number of Fins: 50 Y-shaped Fins Thermal Paste: MX-2 pre-applied Fan Fan Diameter: 90 mm Fan Speed: 100 - 2000 rpm Fan Bearing: Fluid Dynamic Bearing Noise Level: 0.3 Sone Current: 0.06 A Connector: 4-Pin Size & Weight Lenght: 98.6 mm Width: 121 mm Height: 65 mm Weight: 275.5
EXTENDED LIFE SPAN 10 °C lower motor temperature doubles the life span. The BioniX gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years. MAXIMUM QUIETNESS, MINIMUM VIBRATION Extremely quiet operation through a newly developed motor guarantees long sessions without annoying noise. ARCTIC's new motor of the BioniX Fans eliminates vibrations directly at its source, in particular at the motor. The ARCTIC motor absorbs 95 % of vibrations compared to a conventional DC motor. Thus, there is no need for rubber spacers due to the steady torque and smoother switching of the magnet field. 200 TO 1800 RPM With a wide range of regulation and the PWM Sharing Technology (PST), the BioniX F120 fan speed can be controlled synchronously with all your other fans together and thus keep the noise at a minimum while guaranteeing maximum cooling performance when needed. OPTIMISED FAN DESIGN We further optimised the fan blade design to get a higher airflow at lower noise generation. This guarantees high pressure and highly efficient ventilation for your gaming case. ENHANCED BEARING Due to a new alloy/lubricant combination developed in Germany, the friction within the bearing is reduced and a greater efficiency is achieved. This way, there is less heat development as well as less bearing noise and you can enjoy a longer service life of your cooler. Technical Data Performance Fan Speed: 200 - 1800 rpm Airflow: 69 CFM/ 117 m³/h Static Pressure: 2.10 mm H₂O Noise Level: 0.5 Sone Operating Ambient Temperature: 0 - 40 °C Fan Fan Frame: BioniX Control Type: PWM PST Connector: 4-Pin-Connector + 4-Pin-Socket Fan Bearing: Fluid Dynamic Bearing Electric Characteristics Typical Voltage: 12 V DC Starting Voltage: 4.8 V Current/ Voltage: 0.20 A / 12 V Cable Lenght: 400 mm Size & Weight Lenght: 120 mm Width: 120 mm Height: 27 mm Weight: 129 g
Fan Speed: 1350 rpm Airflow: 53 CFM/ 90.1 m³/h Static Pressure: 1.00 mm H₂O Noise Level: 0.3 Sone Fan Frame: Standard Control Type: Fixed Speed Connector: 3-Pin-Connector Fan Bearing: Fluid Dynamic Bearing Operating Ambient Temperature: 0 - 40 °C Typical Voltage: 12 V DC Starting Voltage: 2.7 V Current/ Voltage: 0.12 A / 12 V Cable Length: 400 mm Size (L x W x H): 120 x 120 x 25 mm Weight: 107 g
ROG RYUJIN II 240 ARGB ROG Ryujin II 240 ARGB all-in-one liquid CPU cooler with 3.5" LCD, embedded pump fan and 2x ROG 120mm ARGB radiator fans - Seventh Gen Asetek pump delivers exceptional cooling and minimal noise with an operating range starting at 840 rpm. - 3.5" LCD Display for real-time system stats and personalized logos or animations - Quality ROG ARGB fans deliver high airflow and minimal noise - Pump embedded fan that helps to cool VRM and M.2 area - Reinforced, sleeved tubing for increased durability - Styled to complement ROG motherboards, at the center stage of your build
The NH-U12S chromax.black is an all-black version of Noctua’s award-winning NH-U12S premium-quality quiet CPU cooler. Thanks to the same proven slim-tower heatsink design and NF-F12 PWM fan, it stays true to the NH-U12S’s successful formula of fusing excellent cooling performance with superb quietness of operation and outstanding RAM, case and PCIe compatibility. At the same time, the chromax.black version with its black fan and black coated heatsink combines these assets with a sleek stealth look. Topped off with the renowned SecuFirm2™ multi-socket mounting system, Noctua’s enthusiast-grade NT-H1 thermal compound thermal compound and a full 6-year manufacturer’s warranty, the NH-U12S chromax.black is a premium choice for customers who seek a highly compatible 120mm heatsink that looks just as great as it cools.Award-winning NH-U12S coolerTens of thousands of enthusiast users all over the world swear by the NH-U12S’s quality and performance. Recommended by more than 200 international hardware websites and magazines, it is renowned as being one of the best 120mm coolers on the market.chromax.black designThe NH-U12S chromax.black is black from head to toe: Featuring a black coated heatsink, black fans with black anti-vibration-pads, black fan clips and black mounting parts, it’s right at home in all-black builds and easy to integrate with other colour schemes.Colour-customisableUsing the optional NA-HC1 and NA-HC2 heatsink covers as well as the NA-SAVP1 anti-vibration pads (available in black, blue, green, red, yellow, white), the NH-U12S chromax.black can be fully customised to fit popular build colour schemes such as black and red or black and white.100% RAM compatibilityThanks to its slim design with only 45mm fin depth, the NH-U12S will not overhang the RAM slots even with two fans installed. This gives the user full access to the memory modules on all current CPU sockets and guarantees 100% compatibility with tall heatspreaders or optional memory fans.*Classic 120mm tower size for excellent overall compatibilityStanding 158mm tall, the NH-U12S is short enough to fit most modern mid- or high-end tower cases. Measuring 125mm wide (including fan and fan clips), the cooler stays clear of the top PCIe slot on most standard ATX or Micro-ATX motherboards, ensuring optimum compatibility with multi-GPU setups.NF-F12 120mm Focused Flow™ fanRecommended by more than 150 hardware publications and thousands of enthusiasts world-wide, the Noctua's premium quality NF-F12 Focused Flow™ 120mm fan is renowned to combine superb static pressure, excellent heatsink performance and surprising quietness of operation.PWM support and Low-Noise AdaptorThe NF-F12 120mm fan supplied with the NH-U12S supports PWM for convenient automatic speed control through the motherboard. In addition, the maximum fan speed can be reduced from 1500 to 1200rpm using the supplied Low-Noise Adaptor for even quieter operation.Anti-vibration pads and fan-clips for second NF-F12 (optional)For users who want to achieve even better performance by adding a second, optional NF-F12 PWM chromax.black.swap fan to create a push/pull setup, the NH-U12S includes fan clips and an extra set of custom-designed anti-vibration pads that allow to off-set the rear fan by 5mm to improve acoustics in dual-fan mode.SecuFirm2™ multi-socket mounting systemNoctua’s SecuFirm2™ mounting systems have become synonymous with quality, safety and easy installation. Supporting Intel LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) and LGA20xx (LGA2066, LGA2011-0, LGA2011-3), as well as AMD AM4, AM3(+), AM2(+), FM2(+) and FM1, the SecuFirm2™ mounting included with the NH-U12S is straightforward to install, provides perfect contact pressure and will stand the test of time even under heavy use.Compatibility with past and future socketsThanks to Noctua’s SecuFirm™ ecosystem, the NH-U12S can be made compatible with the older LGA1366 and LGA775 sockets using the optional NM-I3 mounting kit, which is provided free of charge. If technically possible, Noctua will also provide upgrade kits for future sockets, which makes the NH-U12S a safe long-term investment.NT-H1 thermal compoundNoctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds.Soldered interface between heatpipes and finsWith many heatsinks, the fins are press-fitted to the heatpipes. Due to the different thermal expansion coefficients of copper and aluminium, this fit can loosen over years of thermal cycling, which may lead to reduced performance. By contrast, the NH-U12S’s fins are soldered to the heatpipes in order to guarantee a superior thermal interface that doesn’t deteriorate even after many years of usage.
